No Role exist when saving query

Hi all,
After creating a query in query designer when I click to save it, it shows no roles in the Role area. However, I can save it under favorite.
Can someone plz shed some light as to how can I add roles here. Bearing in mind, I have already added some roles in PFCG that appear in SU01 for this user, but these are not available when saving query.
Is there any specific auth object required to save the queries to their respective roles?
Regards.
Mohammad

Hi,
Pls check the below link.
[Re: Steps to add Query to a role (SAP BW);
Hope this helps!!!
Regards,
Jini

Similar Messages

Pop up saying File already exists when saving an excel file while running exe

I have an excel file which I read and write in my application.
When I run the application in development system, it works fine. However when I run the application as an exe and try to save the excel file, it says that 'The file already exists and Do you want to replace?'.
Why does this question asked for exe?
PFA my write excel VI
Thanks in advance.
Attachments:
Write to Excel.vi ‏25 KB

Hi Princess_swa,
The problem may be that when you build an exe, it adds another folder called 'builds' into the filepath.
A good way to fix this is to create a case structure, putting extra strip paths into your filepath if running an exe.
I have attached a screenshot of my code doing exactly this for you to look at. The code creates a 'base path' which is then used to reference all of my file paths in my code - and therefore, they will always have the right number of strip paths when it is run. (Note: in my code I have 2 extra strip paths, due to where I've placed the folder, but one should be sufficient.)
Also there is a 'Check if folder exists' VI which you can again link to a case structure, and change the filename if it already exists. Again, I have provided a screenshot of my code which does this.
Hope this helps,
Lou
Attachments:
runtime strip paths.png ‏9 KB
check folder exists.png ‏5 KB

Function 0012 does not exist when saving contact???

Has anyone seen these before??
I also get Function 0022 does not exist errors also?
Thanks

Hi,
If you want any particular or number of fields output in UPPER case for an RT service, open the particular service related job in work space area-> open the particular query transform-> select the output schema -> select the field on which you want to apply UPPER case. In the field related Mapping area you will find the TABLE_NAME.FIELD_NAME structure, go to start of the TABLE_NAME in the same structure -> select FUNCTION..from the Function Category -> select String Function, from the function name select UPPER -> click Next, don't select anything from Input String drop down box simply click on Finish.
it will show you following structure:
UPPER()TABLE_NAME.FIELD_NAME , drag drop tablename.fieldname in UPPER function. After doing this it should show as:
UPPER(TABLE_NAME.FIELD_NAME)
Save the program and Execute..Output for particular field will display in UPPER case.
Hope this helps..

What does "No such file or directory exist" when saving in Pages?

what's problem? Changed name of file several times. Have been using Pages for years, and this problem blocking save/save as just popped up. Found nothing in Help. Running Pages 4.3.
Thanks

Anyone encountered something similar in the past?

Role exists only in DBA_ROLES

I have a role DPPM_UPDATE_ROLE which exists in the DBA_ROLES but it is not there in any of the database views. Is there a possible reason for this? I am thinking may be it is created but not given any of the grants nor assigned to any of the users.
I appreciate your comments, Thanks.

user3636719 wrote:
I have a role DPPM_UPDATE_ROLE which exists in the DBA_ROLES but it is not there in any of the database views. Is there a possible reason for this? I am thinking may be it is created but not given any of the grants nor assigned to any of the users.
I appreciate your comments, Thanks.If the role exists when querying DBA_ROLES, but does not exist when querying DBA_TAB_PRIVS, DBA_SYS_PRIVS, and DBA_ROLE_PRIVS, then the role is essentially an empty role with nothing granted to it.
HTH,
Brian

BUG? ORA-01461 in Unit Tester when saving a long Dynamic Value Query

I get an ORA-01461 "can bind a LONG value only for insert into a LONG column" error when saving a Test Implementation with a Dynamic Value Query whose length of the SQL statement is roughly 2,000 characters - I'm UNIONing ALL about 30 test case values together, but it seems to be choking on such a long SQL string for some reason....
I am running version Early Adopter Release #2 (2.1.0.63), build MAIN-63.10.
Thoughts?

Confirmed.
Bug 9119144: ORA-01461 IN UNIT TESTER WHEN SAVING A LONG DYNAMIC VALUE QUERY (OR OTHER CLOB)
Brian Jeffries
SQL Developer Team

Stopping user compare when saving composite roles in 4.6c basis pack 25?

One of the environments I look after is a 4.6c system with basis pack 25 they cant upgrade as it breaks a great deal of very heavy customisation in that system.
We have encountered an issue with the saving of composite roles in that system - when a role is saved we must sit through a very long period of user distribution in role XXX while the system performs a user compare of every singular role in that composite role. This is very painful as it can take nearly half an hour simply to save the composite role we then need to rebuild the menu and compress it (we use the composite roles menu structure). The odd thing is that this behaviour wasnt apparent for many years it suddenly started happening about 2-3 years ago to a previous administrator but he wasnt aware of any changes going through, it just began to force these lengthy compares on him when saving composites.
Ive tried in vain to disable this forced compare on every save Ive tried the PRGN_CUST modifications including adding the lines AUTO_USERCOMPARE with a value of NO and USRCOMPARE_PFUD with a value of YES to try and stop the profile generator from doing this but to no avail. Unless these settings need a restart of the system to take effect (do they?) Im at a loss to find any other options.
The menu setting in the profile generator of automatic user master adjustment when saving role is switched off though setting auto_usercompare seems to have broken the ability to bring up the settings: role maintenance dialogue box anyway.
We have a very large number of roles to modify and would be grateful if anyone could offer any advice here.
Thanks
DT

the problem with your issue is that none of use can reproduce that phenomenon, since none of use has that combination of primal release/support package level at hand any longer (at least i think so). so there's only two options left to you:
first: update this special application until the problem goes away - do so by adding note after note on the very subject, like the one i mentioned plus [905924|https://websmp130.sap-ag.de/sap(bD1kZSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=905924&nlang=EN&smpsrv=https%3a%2f%2fwebsmp107%2esap-ag%2ede] plus [662484|https://websmp130.sap-ag.de/sap(bD1kZSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=662484&nlang=EN&smpsrv=https%3a%2f%2fwebsmp107%2esap-ag%2ede] and stop only when you hit one that is not implementable using SNOTE but only by implementing a support-package -> this will obviously be the point where you're stuck then.
(and yes - for the sake of rob burbank: there are several other ways to implement corrections aside from SNOTE).
second: open a call with SAP. mind you, this might become a lenghty one since they will also give you note after note ...
as i said, i'm pretty sure no one in here can help you doing a proper analysis anymore (but maybe i'm wrong).
anyone - any other (better) suggestions?

When saving image i want that firefox auto change the file name if same name exists like google chrome etc. if there is any option pl let me know.

when saving image i want that firefox auto change the file name if same name exists, like google chrome does this. if there is any option pl let me know.

this saves images, i just want to save single image, and wants while saving image, it auto changes the name if find similar name of file in the folder. chromium and maxthod does this

Discoverer 4i error msg "A database role exists which confilcts with this username"

When I try to open workbooks -> from database, I get a Discoverer 4i error msg "A database role exists which confilcts with this username" with only an "OK" button in the window. The database works fine for Discoverer 3.1. After clicking on the OK button, I get an empty list of workbooks to open. If I create a new workbook & try to save it, I see the list of dozens of workbooks in the database.
Which role is it complaining about? How can I fix this?
null

What you will have to do is log into the database as a user with DBA priveleges, query the DBA_ROLES table (SELECT * FROM DBA_ROLES) and see what role exists that has the same name as the user you are logging in as... that should give you a direction to either rename the role, or the drop the user and recreate with a unique name... Good Luck!
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by William Sheridan ([email protected]):
When I try to open workbooks -> from database, I get a Discoverer 4i error msg "A database role exists which confilcts with this username" with only an "OK" button in the window. The database works fine for Discoverer 3.1. After clicking on the OK button, I get an empty list of workbooks to open. If I create a new workbook & try to save it, I see the list of dozens of workbooks in the database.
Which role is it complaining about? How can I fix this?
<HR></BLOCKQUOTE>
null

Print program is not getting triggered when saving the application

Hi all,
My requirement is when i save the invoice using VF01 the print program should get triggered.
The print program is not getting triggered when saving the application even when i have configured the outtype and have attached the print program.
The setting "send immediately (when saving application)" is also checked.
I need to configure it for VF01 transaction.
The error message displayed was " please maintain output device in master data".
Regards,
Umesh

Hi Umesh
Please check if you have missed any of the following:
1. Defining Access Sequence(can use existing).
2. Defining Output Condition Type(can use existing). - Assigning the Driver Program and Form in processing routine.
3. Output Determination Procedure
4. Assign Output Procedure to Billing Types
Kind Regards
Eswar

Errors when saving to SMB mounts (a thorough examination)

Several of the users I support have reported the following issue when trying to save files to the network from Photoshop. I have found several threads about this on both the Adobe forums and the Mac forums. However, in most of the threads the information provided is incomplete or does not control for enough variables. And the result is that Adobe seems to blame Apple, and Apple seems to blame Adobe. So blame aside, here is information that I hope helps Adobe solve the issue at hand.
When saving to a mounted SMB point, users report one of two errors:
Could not save <filename> because of a program error
Could not save <filename> because write access was not granted
I can replicate the issue on:
Lion 10.7.X with Photoshop CS 5
Lion 10.7.X with Photoshop CS 5.1
Snow Leopard 10.6.X with Photoshop CS 5
Snow Leopard 10.6.X with Photoshop CS 5.1
Details:
We have only seen this error in Photoshop. << Adobe has seen the same problems in several other applications >>
I have not tested out whether the issue applies to any other products in the CS suite.
At first I thought the issue might have to do with permissions, but it does not. I have reapplied permissions and the issue persists. And it affects all users, including Domain Admins, such as me, who have no R/W restrictions at any level.
The issue only occurs when Finder is in a view that shows a thumbnail/preview of the image.
Switching Finder to list mode resolves the error in all scenarios
So far I can replicate this with any file on any mount on any of our servers
It only occurs on mounted network points (ie - if I move the files locally, no errors are encountered)
For the following tests, presume the following:
Source folder: smb://example/source/folder
Target folder: smb://example/source/folder
Target sub-folder: smb://example/source/folder/sub
Here are the steps I tested:
Opened the file problem_file.psd.
A warning pops up prompting me to resolve a font vector issue, I chose "Update"
Note: that this error does not pop up for every file, just the original file I worked with, but this warning has nothing to do with the errors being received
Moved a layer so that there would be a change to save
Clicked save
Received the error: "Could not save <filename> because of a program error" << probably related to the known MacOS bug on SMB, or a known Finder/thumbnailing bug >>
The original file, problem_file.psd, is *DELETED* (very problematic) << Known MacOS bug in SMB service, Apple is working on it >>
Then I tested with multiple variations of the following to conrol for things such as layers or font issues:
To eliminate the source file being the issue, I used a .png file that I had created locally with the OS-X screen shot keyboard command. This eliminated layers and fonts as issues.
In step 2 I chose to not update the font vector issue
In step 4 I tried saving as different file types (.jpg, .png, .gif)
Prior to step 6 I flattend the image to eliminate fonts and layers. This eliminated layers and fonts as issues.
Prior to step 6 I flattened the image, duplicate the image, closed the original (without saving), and attempted to save the new duplicate. This eliminated layers and fonts as issues.
Each variation still resulted in "Could not save <filename> because of a program error" and resulted in the deletion of the source file.
Next I controlled for saving image previews:
Photoshop -> Preferences -> File Handling
Under File Saving Options -> Image Previews, I set it to "Never Save" previews
Now when I repeated the tests from aobve, I receved the error "Could not save <filename> because write access was not granted".
Next I controlled for .DS_store files:
Disabled .DS_Store file creation on remotely mounted points.
Deleted the .DS_Store file for the source folder
Verified that .ds_store files were not being created on remotely mounted points
Ran the tests above, and the issue persisted: "Could not save <filename> because write access was not granted"
Now I decided to test sub-folders:
Created a target sub-folder.
Repeated the test above, and its variations, but saving the problem_file.psd to the target sub-folder.
Still received one of the two errors, depending on the variation, but the source file is no longer deleted. This make sense because saving in another directory is really a "save as", and one would not expect safe saving (talked about more later) to affect source files in this scenario.
Sort of a Solution:
Open the file from Finder
Depending on the Finder view, Finder shows a thumnail of the image
Go back to Finder and select a different file
Make changes to the file
Save the file
No error is received
This is when I discovered that the error only occurs when Finder is in a view that shows a thumbnail/preview of the image. Further testing of Finder show that in Cover Flow the error only occurs for the selected image. For example:
Cover flow shows thumbnails/previews of files: A, B, C, D, E
Open A
In Cover Flow select file B
The thumnails of of files A, B, C, D, E are still visible
Make a change to the open file
Save the change
No error is received
This shows that Finder is treating the thumbnails/previews of unselected files different than selected files.
An Interesting Twist:
If from the last scenario with Cover Flow...
Open file A
Go back to Finder and select a different file
Then make a change and attempt to save to the target sub-folder
Receive the error "Could not save <filename>" because of a program error.
Discussion:
Photoshop does something called safe saving.
Photoshop saves the current document to a temporary file with a unique name
Photoshop deletes the original file << this is incorrect >>
Photoshop moves the temporary file to a file with the name of the original file that was deleted in step 2 << incorrect: the temp file replaces the original with an OS call to a function that is supposed to be an atomic operation >>
However, you can see that "safe saving" is misnamed, because while the original is deleted, Photoshop does not appear to be correctly ensuring that permissions exist to allow the temporary file to be ranemd or that the temporary file was renamed without error. Photoshop is either:
Not checking for the error << yes, it is >>
Checking for the permissions and not catching the error << incorrect >>
Checking for the permissions and giving an error to generic to discern the exact problem from. << also incorrect >>
Somewhere there is a conflict (perhaps a race condition) between:
Photoshop creating the temporary file
The server applying permission to the newly created temporary file
OS-X reporting the file has been created
Photoshop deleting the original file
Photoshop saving the new file
Finder updating the thumbnail of the file
As I've shown here, the problem doesn't seem to reside fully with Apple or fully with Adobe. Hopefully this post provides enough information for some clever engineer to create a fix.
My information about safe saving is from an Adobe mod on a previous thread regarding this issue << and copied incorrectly, plus added bad assumptions>>. He detailed the process and also explained that Photoshop uses OS APIs to create and delete the files during safe saving. If his details are accurate, it seems that a temporary fix would at least change the safe saving process to the following:
Photoshop saves the current document to a temporary file with a unique name
Photoshop moves the original file to a temporary backup file (original-file-name.original-extension.bak)
Photoshop moves the temporary file to a file with the name of the original file moved in step 3
Photoshop checks to make sure that the temporary file has been succesfully renamed
If the temporary file has successfully been renamed, it deletes the backup file from step 2 OR if the temporary file has failed to be renamed, the backup is returned to its original file name
The appropriate error message, if any, is displayed
A Few Sources:
http://adobe.hosted.jivesoftware.com/message/4016324
http://forums.adobe.com/thread/732422
https://discussions.apple.com/thread/3380971?start=0&tstart=0

You got several details wrong.
And it sounds like you are describing 2 known MacOS bugs:
1) The OS fails when creating or swapping files on SMB servers, and this happens more often on files that have a resource fork.
2) The Finder/QuickLook/Thumbnailing holds a file busy when it should not, causing program errors or file is busy errors.
We did as much as we could to work around these issues in Photoshop CS6 - after spending a lot of time debugging the OS issues and working with Apple.
Apple is still working on proper fixes within the OS.

Error when saving

Hello BW Experts,
I am getting this error while saving a query in Bex.
'The query could not saved due to a problem in transport'.
I am actually creating a test query production. I am not sure why it is refering to the transport. From what i understand there is nothing to deal with transports.
Anyone experienced a similar problem before.
Suggestions appreciated.
Thanks,
BWer

OSS NOTE 194051
Symptom
An error occurs when you save a query:
Error when saving
"The query could not be saved due to a problem in transport".
Other terms
Business Explorer, query, transport, save, R9 124
Reason and Prerequisites
There are 4 possible reasons for this problem:
1. The BEx default transport request or the development class-dependent transport request is not maintained or released in the Administrator Workbench.
2. The system is set to "cannot be changed". Refer to Note 337950 (as of 2.0b SP 11), which describes how query objects can be edited in systems that cannot be changed.
3. You are not authorized to write to Workbench requests.
4. The BEx default transport request or the development-class-dependent transport request in the Administrator Workbench has another target system than the query (the transport destination of the query is determined via the transport layer of the query's development class (as of 3.0: of the package)).
The error only occurs for query objects which already have a development class, that means, which were already placed on a transport request.
Solution
Solution for Cause 1:
a) Start the Administrator Workbench
b) Choose 'Goto' to change to Transport connection
c) Choose "Request BEx" or "BEx development classes" in the toolbar.
d) Create a (new) request.
e) All changes in the BEx are now written to this request.The end user is no longer confused by 'Transport' dialog boxes.
Solution for Cause 2:
See Note 337950
Solution for Cause 3:
Authorize user to write to Workbench requests.
Solution for Cause 4:
Create a request for each target system. Assign the request suiting the target system of the transport layer of the development class (of the package) to each development class (as of 3.0: to each package) used for BEX objects.
If this does not change the situation, further information is useful for error analysis.
Go to Transaktion SE16, Table RSZCOMPDIR. In field COMPID, select the technical name of your query. Read the COMPUID of your query.
Go to SE37, function module rso_elem_get_related. Parameter I_IOBJNM is set to the COMPUID, and parameter I_OBJVERS (object version) is set to A. Only the export parameters E_T_OBJ_EXISTENTIAL and E_T_OBJ_DEPENDENT are of interest.
These entries are then entered in function module rs_tr_objects_check_insert in import parameter I_T_TR_OBJECT. In this parameter, fill field PGMID fixed with 'R3TR' and field OBJECT fixed with 'ELEM'. Field OBJ_NAME is filled with the contents of field OBJNM from export parameters E_T_OBJ_EXISTENTIAL and E_T_OBJ_DEPENDENT. The other fields are not relevant.
The export parameters of this function module are required for further error determination. Add this information to your OSS message. The table of messages E_T_MSG is important in particular.

Powerpoint 2013 throwing 'File in Use' errors when saving to a network drive, file is NOT in use

One of our sites is having a strange issue when saving to a network location in Powerpoint. I'm not sure it's a Powerpoint problem, but it's a place to start...
When saving a ppt to a mapped network drive (the client is running Windows 8 / Office 2013, the network drive is a DFS share, pointed to a Server 2012 machine if that matters), users will almost always get the following error:
"Someone else is working in (filepath\name) right now. Please try again later."
This happens regardless of where the file is being saved on the network drive, in fact it happens even when there is no pre-existing file with that name in the location. So, even if I'm saving a brand new copy of test.pptx to F:\Share\PPT where there
is not currently a test.pptx, I get the error.
Word, Excel, and all other tested apps save properly. Powerpoint can save correctly to the local computer, but not to the network drive or to My Documents (which redirects to the same network drive).
When the error pops up, if I look in Open Files in Computer Management on the Fileserver, I see the file I'm trying to save listed as being open, but it shows 'Disconnected' rather than a username.
Any suggestions would be appreciated - again, not sure that this is a Powerpoint problem - could be Windows 8 or some mysterious DFS thing...
Thanks.

Hello,
Been having a very similar issue in our environment and just came across this thread while Googling and looking for answers.
In our case, we have Windows 7 clients and 3 main files servers - 2 are Server 2008 R2, and one is Server 2012. We use PeerLink File Collaboration to sync the files between
the servers (similar concept to DFS).  For us, it seems to happen specifically with Excel 2013, and only when saving to the Server 2012 file server. I can reproduce the message pretty much every time. After seeing your post,
I tried it in Powerpoint just out of curiosity, but it saved properly - Word saves properly as well.
Been doing a bunch of testing to try and narrow it down, and this is what I've found:
Excel 2013 -> Server 2012 = error message.
Excel 2013 -> Server 2008 R2 = no error message.
Excel 2010 -> Server 2008 AND Server 2012 = no error message.
<o:p>We've been leaning towards the PeerLink replication as the culprit up to this point, but last night I did some testing with the PeerLink Collaboration turned off, and
still received the error message.. so now I'm even more confused!
I see that it's been a few months since your post.. have you made any progress here?</o:p>

Non-alphanumeric chars replaced with underscore when saving long filenames

Hi,
I have a java application that streams a byte array (content type: 'application/pdf') to an Internet Explorer window. The PDF displays fine, in an embedded version of Adobe Reader 8. However, if I click on the Adobe 'Save' button then the filename gets changed as follows:
PDF URL: http://localhost:8080/mcs/ctrl/flowOpenJobPDFWindow/AP1070.pdf?veryLongQueryString...
PDF filename: http___localhost_8080_mcs_ctrl_flowOpenJobPDFWindow_AP1070.pdf
Anything that isn't alphanumeric is converted into an underscore character. I would expect, and need, the file to be named something like 'AP1070.pdf'.
I think this has something to do with the fact that I am streaming content to IE because if I point an IE window to an identical file that actually exists on the server then the filename when saving does look like 'AP1070.pdf', regardless of the length of the URL or querystring. Does adobe reader expect something in the header to stop this happening?
I can provide java code if this would be useful, or any other information required. If you think this is more likely to be a java issue then I thank you for your time and will raise on a java forum.
Environment:
Windows XP Professional Version 2002 Service Pack 2.
Adobe Reader 8.
Internet Explorer 7.0.5730.11
Many thanks,

You can give feedback to Apple at their Feedback Page.

Problem in saved query

Dear All,
I come across an issue in which i am just creating copy of my existing 3.x query using save as option in the designer. Now when i am executing both queries the copy query is not showing any result while the original one is showing proper results. What may be the reasons please suggest.
Reagrds:
Jitendra

Dear Gupta,
If the generation doesn't works, probably your infoprovider is empty.
Go to transaction LISTCUBE. With this transaction, you can check the infoprovider's content.
provide all input values (exactly the same used on the query).
If returns empty, reload you inprovider again.
Thank you for your attention.
Edward John

No Role exist when saving query

Similar Messages

Maybe you are looking for