No role for business system defined in SXMS_CONF_ITEMS

Hi Experts.
I have the following problem. We were set up the XI in our company and now we are trying to configure and run it propertly. We had some problems so far and now there is the next one: I configured the simple scenario FILE-XI-FILE but it doesn't work :(. Every step from the scenario was completed successfully (after some problems) but when I have started runtime Workbench (RWB) in order to monitor the functionality of XI and I choosed Component Monitoring | Components | Integration Server | Integration Engine GPI I see that I have an error in Self-Test Status | Are roles in SXML_CONF_ITEMS and SLD consistent? In detail it's No role for business system defined in SXMS_CONF_ITEMS. My business and technical systems look to be well configured but now I'm hopeless because I can't find nothing more specific about SXMS_CONF_ITEMS table. I tried some notes and threads from the forum but nothing helped me after all. So please help if someone has an experience with something similar. Any help will be appreciated. Thanks
Ondrej

Hi,
The role of a business system is defined centrally in the SLD. However, you can overwrite this setting locally in the table SXMS_CONF_ITEMS.
This test checks whether the role descriptions are consistent. If not, the locally defined role is used at runtime.
Check in transaction SXMB_ADM -> integration engine configuration a parameter (Corresponding Integ. Server) if all parameters are correct n not lost.
refer : http://help.sap.com/saphelp_nw04/helpdata/en/a5/1b5342d8a7be30e10000000a155106/content.htm
Runtime Workbench - Integration Engine
http://help.sap.com/saphelp_nw04s/helpdata/en/70/58b43be7492354e10000000a114084/frameset.htm
Regards
Aashish Sinha
PS : reward points if helpful

Similar Messages

Role for business system defined in SXMS_CONF_ITEMS'

hi
in RWB integration engine status is red in detail it is showing.
'No role for business system defined in SXMS_CONF_ITEMS'.
how can i fix this.
regards,
krushi

HI
Runtime Workbench - Integration Engine
Are the Roles in SXMS_CONF_ITEMS and the SLD Consistent?
//***The role of a business system is defined centrally in the SLD. However, you can overwrite this setting locally in the table SXMS_CONF_ITEMS.
This test checks whether the role descriptions are consistent. If not, the locally defined role is used at runtime.
extract taken from this thread
http://help.sap.com/saphelp_nw04s/helpdata/en/a5/1b5342d8a7be30e10000000a155106/frameset.htm
Message was edited by:
Anusha Ramsiva

Transport target for business system not found in System Landscape Director

Folks,
We have new installed new PI 7.1 system and importing interfaces from the OLD XI 3.0 system in to new PID 7.1 system.
We are getting following error when we try to import an interfaces in to new PID system:
Import failed because of business system transfer object
Communication component XID_FileSystem: Obligatory
transport target for business system XID_FileSystem not found in
System Landscape Directory
We are yet to install PIQ system.
All the interfaces in the old XID system have transport target of XIQ system. I removed the transport taget for the interface, but transport target is still showing in the Business system under transport target head.
How can we overcome this issue as we will not have PIQ system atleast for two weeks.
Thanks in advance,
Regards
Chandu

Hi,
You need to maintain Transport Groups and target for business systems while SLD transports between your XI system and PI 7.1
Illustrated with DEv & PRD here.
Procedure:
1) Call Integration Builder screen on DEV Server with http://hostname:J2ee Port/rep
2) Call SLD (System Landscape Directory) Component from the Integration builder
Save all the Following .zip files on the Local Desktop
3) Select the Software Component & say Export that you want to Export from DEV
Server to Production server and which is going to use in the IR of XI
4) Also Select the Product of the above SWC and say Export
5) Select the Technical Systems (TS of XI & TS of the SAP R/3) and say Export
6) Select the Business System(s) & say Export; those are associated with above Exported
Technical systems.
In Production Server
1) Logon to the SLD of the Production Server.
2) Create a Technical System and Business system which points to the Production SAP R/3
3) Go to Administration TAB in the main page of SLD
4) Select the Import option to Import the SWC , PRD, TS,& BS which we Exported Earlier in DEV Server
5) Click on Browse and select the .zip files that is to Import into Production Server,
Which were stored on the local desktop at the time of DEV Server Export
And say Import Selected File Option
By this we exported and imported the SLD Objects
Now we have to create transport groups and transport targets in the Production server of SLD
Creation of Transport Groups
Edit GroupsGroup1) Select the Business systems
2) Click on New Group and give the name of the group as DEV_group & select the
Corresponding Development serveru2019s integration Server
3) Similar way create another group for Production serveru2019s business system as
PRD_group and select the Production serveru2019s integration Server
Creation of transport targets
This is to Define which business systems in two different groups correspond to each other
1) Select each Business system in the SLD and select transport TAB---click on
Add/Change Target and select its corresponding target business system.
For Example:
If you select the business system of Production XI server means
In the target you have to select group as DEVGROUP and the business system of Development XI server.
Like this do the same for other business systems also
Ex:
BS_PRD_Integration Server----
BS_DEV_Inetration Server
How to create Transport Groups & transport Targets
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
Regards
Seshagiri

Configure Role of Business System " as Central Integration Server , PI

Hi Experts,
I am running transaction code IDX5 in my xi system it is showing as "system is not a central integration server unable to start the program ".In SXMB_ADM role of business system need to configured .If we need to configure how to do this .
Regards
Praveen

Hi Praveen,
For configuration of integration server please go to SXMB_ADM>In configuration choose Integration engine configuration->And add one runtime parameter IS_URL...and specify the role of business system as Integration server and specify the corresponding Integration server i.e dest://httpdestination. This destination is RFC destination that should be created in PI sytem of type 'H 'which contains the target host as host name of PI system and path prefix as '/sap/xi/engine?type=entry'.
Thanks & Regards,
Priyanka Anagani

Require a Java API to read Business System defined in SLD

Hi Experts,
Is there any standard java API that provides any methods to retrieve information about the system mentioned in business landscapes. e.g.(name of a system )
In my Web DynPro Application I need to provide a drop down UI that contains names of the Business Systems defined in SLD

Hi,
http://help.sap.com/javadocs/nwce/current/se/com/sap/security/api/umap/system/ISystemLandscapeWrapper.html
try
ISystemLandscapeObject system;
try
 List wrappers = UMFactory.getSystemLandscapeWrappers();
 for (int i = 0;i < wrappers.size(); i++)
 ISystemLandscapeWrapper e = (ISystemLandscapeWrapper) wrappers.get(i);
 system = e.getSystemByUniqueKey("CN");
 if(system == null)
 system = e.getSystemByAlias("CN");
 else
 break;
}catch(Exception e)
// handle the exception
Regards
Ayyapparaj

Obligatory transport target for business system SAPR3D not found in System

HI All ,
We have installed New PI 7.1 system and stared migrating the interfaces from XI 3.0 to PI 7.1 . in Devlopement system .
IR object have been successfully deployed but while delopying ID objects got the following error . Obligatory transport target for business system SAPR3D not found in System Landscape Directory.
When I checked with business system transport target was not defined ., Please suggest how to go ahead further .
Thanks ,
Prakash

Hi Ravi,
Please go through below disucssion it is on the same line of your question.
Transport target for business system not found in System Landscape Director

DEV- QAS : Obligatory transport target for business system not found

Hi guys!
I have read all the other threads about this subject, but since I still have no success, I´m feeling obligated to ask you for a help (deadline approaching fast!)
I´m trying to transport a Communication Channel, from DEV environment to QAS. I'm having the 'usual' error:
Import failed because of business system transfer of object Communication Channel * | SIGA | SOAP_SYNC_SENDER: Obligatory transport target for business system SIGA not found in System Landscape Directory
Here were my steps:
Keep in mind that in DEV, everything was up and running: Software Component, Product, Technical System and Business System for this name "SIGA".
1 - In DEV, I created a new Technical System, named "SIGA_QAS", pointing to my QAS server. (Keeping in mind I already had a "SIGA" pointing to my DEV server.)
2 - Still in DEV, I did create two groups: GROUP_DEV and GROUP_QAS, one points to INTEGRATION_SERVER_DX1 (DEV) and the other INTEGRATION_SERVER_QX1 (QAS).
3 - Still in DEV, I created the Business System called "SIGA_QAS" also, pointing to my QAS server.
4 - Still in DEV, I went inside both Business Systems and put: "SIGA_QAS" as TARGET BS of "SIGA" (which automatically puts "SIGA" as SOURCE BS of "SIGA_QAS")
If I look at my QAS SLD, I can see all of these objects already there, since my BASIS team did activate the 'sync' between these two environments. So, I dont need to create anything 'new' in my QAS SLD, all the objects are there, same as DEV SLD.
If I try to EXPORT/IMPORT a simple Communication Channel (using file system or even CTS - I tried both) I get the error mentioned above.
But this is 'wierd' for me, since the error says: "business system SIGA not found in System Landscape Directory", but it is there, in both SLDs.
Am I missing something here?
Thanks!
Ricardo Sancio Lóra
Brazil

Hi,
If you not tried this then try it. Delete the Business System SIGA from Integration Directory in your QAS system and then again import the business system from SLD. Acitvate the changes and then import the CC from Dev to QAS.
Regards,
Sarvesh

How do we import business systems defined in the SLD to IB:configuration...

how do we import business systems defined in the SLD to IB:configuration...

hi,
go to Scenario tab, Object -> New , Select the configuration scenario enter the configuration scenario name then save.
Expand Service without party ->Select the business system and right click click on next, next select your business systemd.
IF business system not appeared in ID..go to Environment -> Clear SLD data cache.
again try to assign the business system.
Regards,
Venu.

Obligatorytransport target for business system not found in SLD

Dears,
We implemented CTS+ in our PI three system landscape.
While implementation we configured local SLD and after that for dev and QAs we configured a central SLD.
And for Production we have seprate SLD.
In DEV SLD we have three buisness systems:
File_Dummy of type DEv
File_Dummy_Q of type QAS
File_Dummy_P of type PRD
Now in transport target group of File_Dummy I put File_Dummy_Q and in File_Dummy_Q I put File_Dummy_P but for BS File_Dummy_P target group is empty.
Now I put all these BS into a request and import them in QAS then I get error:
Obligatorytransport target for business system File_Dummy_P not found in System Landscape Directory
Now I am not getting what to put in transport target of File_Dummy_P as it is of type.
I tried to put their File_Dummy_P but we can not put PRD type BS there.
I also tried with dev and qas BS there but still same error.
Please suggest how to resolve this error.
Regards,
Shivam

Hi,
did you transported the associated technical systems of your business systems....?
Also I assume you have assoicated the targets foryour business systems in SDL..
like for D targets are Q and P
for Q source is D and Target is P
for P sources are D and Q... if not assoicate the same...
and also make sure the three groups are available for three environments...
HTH
Rajesh

Obligatory transport target for business system BS_DEV in SLD

Hi all,
 We are moving receiver detrmination from QA to PRD, there we are getting one error
"com.sap.aii.ibtransportclient.XiTransportException: caused by: ClientServerException exception:Impo
>>>rt failed because of business system transfer of object Receiver Determination BS_DEV
>>> * *: Obligatory transport target for business system BS_DEV not found in Sys
>>>tem Landscape Directory caused by: com.sap.aii.ib.core.transport.api.PostprocessingException: Import
>>>failed because of business system transfer of object Receiver Determination BS_DEV
*: Obligatory transport target for business system BS_DEV not found in Syste
>>>m Landscape Directory caused by: com.sap.aii.util.hmi.api.HmiMethodFault: caused by: ClientServerEx
>>>ception exception:Import failed because of business system transfer of object Receiver Determination
>>> BS_DEV * *:Obligatory transport target for business system WP
>>>C_Dev not found in System Landscape Directory caused by: com.sap.aii.ib.core.transport.api.Postproce
>>>ssingException: Import failed because of businesssystem transfer of object Receiver Determination
>>> BS_DEV * *: Obligatory transport target for business system BS_
>>>DEV not found in System Landscape Directory"
I am moving the same object from development to production, i feels ther is some problem in setting transport target.
BS_DEV target system is BS_QA, in development sld
BS_QA source system is BS_DEV anf target system Is BS_PRD in Quality sld
BS_PRD source system is BS_QA, in production.
The above error occurs when we are moving same object which i moved from development to quality to production.
whether i need to take obejct from quality and need to move that one to production, or i can use the same development object to production...?
Regards
Pradeep P N

Hi,
Even I am facing the same problem.
we have given the Transports Target as mentioned, but still facing the same error:
Deployment
Transport request : DPIK900141
System : QPI
tp path : tp
Version and release: 375.30.25 710
CTS Deploy Service - Version 0.92 06.03.2007
========================================================================
Deploy Web service destination = CTSDEPLOY
Directory = /usr/sap/trans/data
SDM Deploy URL =
SLD Deploy URL =
XI Deploy URL = http://sqnpi1.sap.sgroupit:51600
Double-stack system QPI
Deploy for XID
Deploy File = 2f8021d0f9ca11dea81e001a64925608
Start of Web service log
Deploy Service called with following parameters:
CommunicationData-Type:1
CommunicationData-Address:http://sqnpi1.sap.spoolzgroupit:51600/dir
CommunicationData-Host:sqnpi1.sap.sgroupit
CommunicationData-Port:51600
CommunicationData-User:'filled'
CommunicationData-Password:'filled'
Deployable(0)
Deployable-Type:1
Deployable-Id:/usr/sap/trans/data/DPIK900041/2f8021d0f9ca11dea81e001a64925608
com.sap.aii.ibtransportclient.XiTransportException: caused by: ClientServerException exception:Impo
>>>rt failed because of business system transfer of object Receiver Determination DPI SI_POS_CH_SN
Returncode:'8'
Deployment
End date and time : 20100105151741
Ended with return code: ===> 8 <===
Can anyone guide to solve it.

Related Integration server for Business System in SLD

HI All,
IN SLD we have one Technical System for PI and one TS for R/3 System.
When I crating Business System for R/3 in R/3 TS, in Integration Tab what I have to select for Related Integration Server option.
It is having None and Business System of PI TS System.
Please help me in this.
Regards,
Sree

Hey
Looks like you are defining this Business system as a Integration server.
See here is what you need to do.
Step 1:First of all create a business system for XI system itself,this business system will have details of XI system and its role will be Integration server.You can have only 1 Integration server(hence you are getting the error).
Step 2:Now define a business system of type Web as ABAP for R/3 system,this system will have role as Application system but the related integration server will be the name of the business system of PI system(the one which you defined in Step 1).
As of now,are you getting any business system name in the drop down box for related integration server while creating business system for R/3 in SLD?
If yes,then simply select that
Thanx
Aamir

Role of business system in SLD

I am doing PI post configuration with Central SLD on solution manager.What should be the Role of the business system for solution manager?In sxmb_adm should I give this as application system? And what should be the corresponding integration server?

Hi,
it should be application and should be connected to PI as any other R3 application system. If you connect it ti PI, then enter the PI destination as explained in the PI configuration guide, section connection to other business systems.
If you are not using PI, then it is not relevant - you should leave both fields empty
regards,
jaime

Business systems defined in SLD not visible in Integration Directory.

Hi,
After having finished with the SLD configuration involving defining the product, software component, TS and BS. Then I imported in the Integration Repository from SLD and then defined message interfaces, types etc. After that, in Integration Directory when I am trying to assign new business system (to expose business system of sld as service), it is not showing me the newly defined business systems of SLD in the Integration directory.
Please suggest me a possible solution for this.
Thanks,
noor

Hi,
It happens sometimes due to Meta Data Issue,
Go for SLD Cache :
To clear the SLD cache, from the Integration Builder main menu, choose Environment ® Delete Cache for SLD Data.
Once we have deleted the cache for SLD data, accessing objects in the SLD may take longer than usual initially.
Still If you are not able to see the Business System when trying to import the business system. Go to Objects tab in ID --> Business System and you will find the imported Business System --> Right Click and ADD to Scenario.
Regards
Agasthuri Doss

Role of business system

while creating a business system, the business system role can be given as an application system or integration server
what is the signifance of using it as an integration server and as application system

Hi Harsh,
However it's not clear from documnetation
they mentioned that we can use INTEGRATION server in both the cases weather it's application sys. or other sys.
But i think while craeating it for R/3 sys. i.e. Wwe AS ABAP we use it as Integration server else as application system.
Check this link: point 8 and 9
http://help.sap.com/saphelp_nw2004s/helpdata/en/87/7277e8fba34421a45d97a41ec27381/frameset.htm
Sachin

Proxy Runtime for Business System not visible in RWB.

Hi,
We are running SAP PI 7.10 SP7.
The current landscape contains currently 2 SAP R/3 application systems and 1 SAP PI systerm that are all registered with the SAP PI SLD.
There is Business Systems configure for both the Application systems in the SLD from the registration.
In the ID it was possible to import these Bussiness systems and to use them in scenarios. It is even posible to post messages to both IE on these Business Systems. If tcode SPROXY is executed on both these business systems then it connects to the same ESR. On both business systems I have created a "PIRWBUSER" with the same password and roles as on SAP PI.
Now my ploblem is that I only see one proxy runtime in the RWB under Integration Engines.
Please can you assist in this matter?
Regards
Willie Hugo

Hi,
The problem is solved with patches to the following JAVA components.
MESSAGING 7.19
SAP_XIAF7.17
SAP_XITOOL7.14
Regards
Willie Hugo

No role for business system defined in SXMS_CONF_ITEMS

Similar Messages

Maybe you are looking for