No Rows in APEX_PLSQL_JOBS View

Gurus,
I am not seeing any rows in this (APEX_PLSQL_JOBS) view for any operations been done. I am trying to query up this view from teh toad to get teh status of the job that was submitted from a Apex Session/screen. I am able to display the id ( job id) on the screen , but not able to query this view to see what is the status of the submitted job.
requirment for me : Need to show the user the job ( background pl/sql process submitted) has been completed after 30-40 minutes on the same screen that the User submitted the job ( screen times out - that totally different issue) or in a custom screen for completed jobs/processes.
Please advice when time permits and Thanks in advance for all your inputs and feedbacks.
Thanks
Sheik
This issue has been resolved using the following thread
Re: Background Process in APEX
Edited by: Sheik on Jan 3, 2011 10:15 AM

Hi,
Security group id must be set when you query that view.
Try query from Apex SQL workshop or create report to your app from view
Regards,
Jari

Similar Messages

  • Way to rollback only one row of a view object

    Is there a way to "rollback" only one row of a view object? That is, two or more rows have been modified but we wish to only restore one of the rows to the original (database) values.
    Is there a way to retain all of the current rows in all of the view objects for an application module after issuing a jbo:Rollback?
    Thanks

    Is there a way to "rollback" only one row of a view object? That is, two or more rows have been modified but we wish to only restore one of the rows to the original (database) values.In jdev903, a new method is being added to Row interface to reset the row state to the transaction-original state i.e., rollback the row to it's original values.
    Is there a way to retain all of the current rows in all of the view objects for an application module after issuing a jbo:Rollback?No. You may however override before/afterRollback methods on the ViewObjectImpl subclasses to cache the current row key in beforeRollback and restore currency on the default iterator to that rowkey in afterRollback
    Thanks

  • Creating multi rows in Weekly view for same Att type

    Hi All,
    This is how we can reproduce the problem
    1.Enter working hours against same att type for different dates in the same row in Weekly view of record working time.
    2.Go to daily view and come back to weekly view.
    3.It creates different rows for the att type for the above dates entered instead of single row
    Please let me know the solution
    Thanks
    Bala Duvvuri

    Siddharth,
    Even I got the same response for  the OSS message from SAP.is it due to incompatibility ?
    My portal version is EP7.0 SP17
    ESS 600 SP13
    EA-HR 603 level 0010
    SAP_HR 600 level 0036
    Thanks
    Bala Duvvuri

  • How to get color in the final row of table view( table control)

    Hi,
    iam having a table control displayed with 10 records as output,in that i need to provide a color for the final row since it is total inorder to show difference from other records.
    Kindly advise me on this.
    Thanks & Regards,
    Nehru.

    Hi Nehru,
    Checkout [THIS|Re: set color for a particular row in table view] thread .
    [This |http://www.sapdesignguild.org/resources/htmlb_guidance/table.html#at] Might also help you.
    Regards,
    Anubhav
    Edited by: Anubhav Jain on Jan 4, 2009 7:34 AM

  • How to Hide Row in table view depend on condition

    Dear Friends,
    Please any one suggest how to do hide some rows in table depend on condtions.
    My Issue is :
    I have table with binding componant context controller, with in that some rows are no need to disply in my table, I tried to delete that entities from collection wrapper in do_prepare_output. but that entites are perminatly deleted from model node.
    how can achive this with out delete entities from model node and hide some rows in table view.
    thanks & Regards

    Hi Andrew,
    Please can you explain alobrate, because i wont' found that method in my implimentation and it's table config like follow
    <% IF attr->check_consistency( ) eq abap_true. %>
        <chtmlb:configTable  xml="<%= lv_xml %>"
                             id="TextList"
                             navigationMode="BYPAGE"
                             onRowSelection="select"
                             table="//Text/Table"
                             width="100%"
                             selectedRowIndex="<%=Text->SELECTED_INDEX%>"
                             selectedRowIndexTable="<%=Text->SELECTION_TAB%>"
                             selectionMode="<%=Text->SELECTION_MODE%>"
                             usage="ASSIGNMENTBLOCK"
                             visibleRowCount="3"/>
      <% ENDIF. %>
    thanks & Regards
    Ganesh

  • Programatically inserting rows of a view object trouble

    Hi,
    I'm using JDev 10.1.3.3. I'm trying to use the application module specific to my app to create rows in a viewobject. User is on page "view", goes to page "new" and fills out a form which upon submit sends the data to an Application Module method I've exposed to the client. What doesn't happen, is when I add the row of the view object programatically in my view object, it doesn't display on the "view" page until a commit is done (when navigating back from the "new" page".
    Here is some sample code of the insert into a composite (not composition) viewobject. When I insert in the new page, it returns to the view page... and the row doesn't show up until commit happens:
    //in my application module
    public void doiIt2(String name, String badge, String item){
    UserItemViewObjRowImpl row = null;
    row = (UserItemViewObjRowImpl)getUserItemViewObj1().createRow();
    row.setBadge(badge);
    row.setBadge1(badge);
    row.setItem(item);
    row.setName(name);
    row.setNewRowState(Row.STATUS_NEW);
    getUserItemViewObj1().insertRow(row);
    getUserItemViewObj1().executeQuery();
    Does anybody know how to get this row to pop in, like using a "creation form" to a table in a view page? What am i doing wrong??? Do I need to do something special in my pagedef of the "view" page?
    Thanks,
    Dan

    Chris,
    Thank you for looking at my problem. The row is not inserted into the table (on the view page) with the code I shared. The criteria for the table's VO is simply a select all, with no where clause, so I don't think I'm excluding it... Upon hitting a commit button, the new row does pop in to the table witch is further evidence that the criteria for the VO isn't excluding the new row.
    I have tried insertRowAtIndex(), even before I posted this with no luck.
    BTW, if I add to the bottom of the code I shared, getDBTransaction().commit; or getDBTransaction().postChanges(), the row does pop into the table when the "view" page is navigated to.
    Am I doing something wrong with my construction of my ViewObject? It is a composition (I got that wrong in my initial post) between two entities. The Item entity is updateable, and not a reference using an association between the two entities on the Badge attribute.
    I am trying to have new composite VO rows always show up as the first item in a table. I've read that the Row.STATUS_NEW will always do this... so I'm trying to avoid posting/committing the new row. I'm also not above inserting at a particular location, but some of the pages I hope to use this pattern with re-execute the VO every time the page is rendered, instead of just rebinding the Iterator with the VO rowsets. I'm being led to believe that if a Row is posted or committed, re-executing the query will resort all rows based on 'order by', etc.
    Also, I have setup a similar yet even more complicated example using three entities. I was able to make this work as expected. The difference is that I was using an ADF Creation Form. ( I did have some work in the model to make all the keys line up though.... posting order... etc.).
    I have gotten similar things like this to work with single entities VOs. I'm just having trouble when I do composite VOs. That is supported, isn't it?
    Dan

  • HOW TO GET THE SELECTED VALUE IN A ROW FROM ONE VIEW TO ANOTHER VIEW?

    hi all,
    I  have a small issue.
    i have created two views.In the table of the first view i'm selecting a row and pressing the button it will move to next view.
    i am adding some fields manually in the table of the second view and pressing the save button.Here all the values should get updated corresponding to the field which i have selected in the first view.
    I want to know how to get the particular field in the selected row from one view to another view.
    Kindly help me.

    Hi,
            Any data sharing accross views can be achiveved by defining CONTEXT data in COMPONENT CONTROLLER and mapping it to the CONTEXT of all the views. Follow the below steps.
    1. Define a CONTEXT NODE in component controller
    2. Define same CONTEXT NODE in all the views where this has to be accessed & changed.
    3. Go to CONTEXT NODE of each view, right click on the node and choose DEFINE MAPPING.
    This is how you map CONTEXT NODE and same can be accessed/changed from any VIEW or even from COMPONENT CONTROLLER. Any change happens at one VIEW will be automatically available in others.
    Check the below link for more info regarding same.
    [http://help.sap.com/saphelp_nw04s/helpdata/EN/48/444941db42f423e10000000a155106/content.htm]
    Regards,
    Manne.

  • How to distinguish individual rows in a view?

    As well known, we can use rowid to distinguish individual rows in a table. However, who know how to distinguish individual rows in a view? For there are not rowid in a view.

    I'm not sure I usnderstand your question, or at least I hope I don't.
    We do not use ROWID to distinguish rows in a table: we use unique iodentifiers, that is primary keys. A primary key is stable across the lifetime of a record: a rowid is guaranteed only for the lifetime of a transaction, and then only if we have locked that row.
    From this it follows, we should so design our views that each row in the view has a column, or combination of columns, that uniquely identify it.
    Cheers, APC

  • When selecting a row from a view with a nested table I want just ONE entry returned

    Does a nested table in a view "EXPLODE" all values ALWAYS no matter the where clause for the nested table?
    I want to select ONE row from a view that has columns defined as TYPE which are PL/SQL TABLES OF other tables.
    when I specify a WHERE clause for my query it gives me the column "EXPLODED" with the values that mathc my WHERE clause at the end of the select.
    I dont want the "EXPLODED" nested table to show just the entry that matches my WHERE clause. Here is some more info:
    My select statement:
    SQL> select * from si_a31_per_vw v, TABLE(v.current_allergies) a where a.alg_seq
    =75;
    AAAHQPAAMAAAAfxAAA N00000 771 223774444 20 GREGG
    CADILLAC 12-MAY-69 M R3
    NON DENOMINATIONAL N STAFF USMC N
    U
    E06 11-JUN-02 H N
    05-JAN-00 Y Y
    USS SPAWAR
    353535 USS SPAWAR
    SI_ADDRESS_TYPE(NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NUL
    L, NULL)
    SI_ADDRESS_TAB()
    SI_ALLERGY_TAB(SI_ALLERGY_TYPE(69, 'PENICILLIN', '11-JUN-02', NULL), SI_ALLERGY
    TYPE(74, 'SHELLFISH', '12-JUN-02', NULL), SIALLERGY_TYPE(68, 'PEANUTS', '13-J
    UN-02', NULL), SI_ALLERGY_TYPE(75, 'STRAWBERRIES', '13-JUN-02', NULL))
    SI_ALLERGY_TAB()
    75 STRAWBERRIES 13-JUN-02
    *******Notice the allergy entry of 75, Strawberries, 13-JUN-02 at the
    end. This is what I want not all the other exploded data.
    SQL> desc si_a31_per_vw
    Name Null? Type
    ........ Omitted uneeded previous column desc because of metalink
    character limit but the view is bigger then this.......
    DEPT_NAME VARCHAR2(20)
    DIV_NAME VARCHAR2(20)
    ADDRESSES SI_ADDRESS_TAB
    CURRENT_ALLERGIES SI_ALLERGY_TAB
    DELETED_ALLERGIES SI_ALLERGY_TAB
    SQL> desc si_allergy_tab
    si_allergy_tab TABLE OF SI_ALLERGY_TYPE
    Name Null? Type
    ALG_SEQ NUMBER
    ALG_NAME VARCHAR2(50)
    START_DATE DATE
    STOP_DATE DATE
    SQL> desc si_allergy_type
    Name Null? Type
    ALG_SEQ NUMBER
    ALG_NAME VARCHAR2(50)
    START_DATE DATE
    STOP_DATE DATE

    Can you explain what do you mean by the following?
    "PL/SQL tables (a.k.a. Index-by tables) cannot be used as the basis for columns and/or attributes"There are three kinds of collections:
    (NTB) Nested Tables
    (VAR) Varrying Arrays
    (IBT) Index-by Tables (the collection formerly known as "PL/SQL tables")
    NTB (and VAR) can be defined as persistent user defined data types, and can be used in table DDL (columns) and other user defined type specifications (attributes).
    SQL> CREATE TYPE my_ntb AS TABLE OF INTEGER;
    SQL> CREATE TABLE my_table ( id INTEGER PRIMARY KEY, ints my_ntb );
    SQL> CREATE TYPE my_object AS OBJECT ( id INTEGER, ints my_ntb );
    /IBT are declared inside stored procedures only and have slightly different syntax from NTB. Only variables in stored procedures can be based on IBT declarations.
    CREATE PROCEDURE my_proc IS
       TYPE my_ibt IS TABLE OF INTEGER INDEX BY BINARY_INTEGER;  -- now you see why they are called Index-by Tables
       my_ibt_var my_ibt;
    BEGIN
       NULL;
    END;That sums up the significant differences as it relates to how they are declared and where they can be referenced.
    How are they the same?
    NTB and VAR can also be (non-persistently) declared in stored procedures like IBTs.
    Why would you then ever use IBTs?
    IBTs are significantly easier to work with, since you don't have to instantiate or extend them as you do with NTB and VAR, or
    Many other highly valuable PL/SQL programs make use of them, so you have to keep your code integrated/consistent.
    There's a lot more to be said, but I think this answers the question posed by Sri.
    Michael

  • Adding a button in each row of table view

    Hi.
    In my application i have to add a button in each row of table view. i have done this by using UICatalog example. now problem is how I can handle the click events of these buttons.
    suppose i have 5 buttons in 5 rows ... now one of them is clicked(suppose button in 3rd row). how would i know that button in 3rd row is clicked.
    Muhammad Usman Aleem

    - (UITableViewCell)tableView:(UITableView)tableView
    cellForRowAtIndexPath:(NSIndexPath*)indexPath {
    static NSString *CellTableIdentifier = @"CellTableIdentifier ";
    static NSUInteger nTag = 100;
    UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:
    CellTableIdentifier];
    if (cell == nil) {
    CGRect cellFrame = CGRectMake(0, 0, 300, 65);
    cell = [[[UITableViewCell alloc] initWithFrame:cellFrame
    reuseIdentifier:CellTableIdentifier] autorelease];
    CGRect labelRect = CGRectMake(10, 26, 190, 15);
    UILabel *label = [[UILabel alloc] initWithFrame:labelRect];
    label.textAlignment = UITextAlignmentLeft;
    label.font = [UIFont boldSystemFontOfSize:12];
    // set all label tags to 10 so the label can be found in the subviews
    label.tag = 10;
    [cell.contentView addSubview:label];
    [label release];
    CGRect buttonRect = CGRectMake(210, 25, 65, 25);
    UIButton *button = [UIButton buttonWithType:UIButtonTypeRoundedRect];
    button.frame = buttonRect;
    // set the button title here if it will always be the same
    [button setTitle:@"Action" forState:UIControlStateNormal];
    button.tag = nTag++;
    [button addTarget:self action:@selector(myAction:) forControlEvents:UIControlEventTouchUpInside];
    // make sure the button is the lowest subview so it's easy to find
    [cell.contentView insertSubview:button atIndex:0];
    // button will be autoreleased so don't release it here
    // the label text and button title come from an array of NSDictionary in this example
    NSUInteger row = [indexPath row];
    NSDictionary *rowData = [self.data objectAtIndex:row];
    UILabel *thisLabel = (UILabel*)[cell.contentView viewWithTag:10];
    thisLabel.text = [rowData objectForKey:@"Text"];
    // set the button title here if it depends on the row
    UIButton *thisButton = [[cell.contentView subviews] objectAtIndex:0];
    [thisButton setTitle:[rowData objectForKey:@"Button"] forState:UIControlStateNormal];
    return cell;
    - (IBAction)myAction:(id)sender {
    UIButton *theSender = sender;
    UITableViewCell *cell;
    NSUInteger row = 0;
    for (cell in [theTableView visibleCells]) {
    UIButton *thisButton = [[cell.contentView subviews] objectAtIndex:0];
    if (thisButton.tag == theSender.tag) {
    row = [[theTableView indexPathForCell:cell] row];
    break;
    NSLog(@"myAction: row=%d", row);

  • Keep header row always in view

    I know this must be easy, but I couldn't figure it out. Can anyone tell me how to keep the top row always in view for a very long document? Thanks!

    If that row is defined as a header row, you can accomplish what you want simply by going to Show Print View in the View menu. If the table does not now have a header row, add one by choosing Add Header Row in the Table menu, then copy the contents of your existing top row into the added header row.

  • Passing Multiple table row from one view to another view

    Hi,
    How to Passing Multiple table row from one view to another view in Web Dynpro Abap. (Table UI Element)
    thanx....

    Hi Ganesh,
    Kindly do search before posting.. this discussed many times..
    First create your context in component controller, and do context mapping in two views so that you can get values from
    one veiw to any views.
    and for multiple selection, for table we have property selection mode.. set as multi and remember context node selection
    selection cardinality shoud be 0-n.
    so, select n no of rows and based on some action call sec view and display data.( i think you know navigation between veiw ).
    Pelase check this...for multi selection
    Re: How to copy data from one node to another or fromone table to another table
    for navigation.. check
    navigation between the views
    Cheers,
    Kris.

  • Problem w/: Error while getting estimated row count for view

    JDev 10.1.3 - Steps
    1. created a ADF VO w/ one bind variable vNAME.
    2. Created a basic jspx page, use the data control pal. to drop in VO w/ executeparam option. Use the data control pal to drop in VO w/ ADF Read-Only Table w/ select and sort option. Selected all VO columns in table.
    3. Following Error msg occurs when running jspx page -
    oracle.jbo.DMLException: Error while getting estimated row count for view object CategoryView, statement SELECT count(1) FROM (SELECT
    CATEGORY.CATID CATID,
    CATEGORY.NAME NAME,
    CATEGORY.PICTURE PICTURE,
    CATEGORY.ACTIVE ACTIVE
    FROM
    CATEGORY
    WHERE
    (CATEGORY.NAME LIKE UPPER(:vName)||'%')) .
    Tested SQL Statement in SQL Worksheet works ok (with a Value replacing ':vName').
    Can anyone advise - seems to be a straight forward process that is returning this error msg. I have tried variations of the SQL stmt with no luck. The jspx page errors when the ADF Read-Only Table is added.

    I seem 2 have the same error, in a slightly different situation.
    I have a view which subclasses a Entity with a history column 'CreatedOn'. When performing a quick search/filter on this column I get the same error. The ADF app is build on a DB2 database, so no named parameters here. Instead invalid SQL is created when executing the estimated row count. The WHERE clause contains 'CreatedOn = null', should be 'CreatedOn is null'. Furthermore the input of my quick search is not filled in this clause.
    Any help would be appreciated

  • How to Insert the row in the View object

    I want to insert the row in the view object by instantiating Impl.java file
    Could someone please let me know how to insert the blank row
    Thanks

    Inserting onto a view object should be done the following way:
    //vo is your view object
    Row aRow = vo.createRow();
    //Set your attributes
    aRow.setAttribute("AttributeName", objectValue);
    //insert
    vo.insertRow(aRow);
    That should work for you if you are programming the input. If you are using java components bound to columns in a view object then the input should be done automatically for you when you commit.

  • InsertRow does not show the inserted row on the view

    hello:
    The code below works well and shows the row on the view when added. However, when there are several existing rows and I have to scroll to next pages. an insert button on that page does not show the new Row at all. Is there a way for me to see the row even if I scroll over to the last page and try an insert?
    ViewObject myVO = this.getMyView();
    Row newRow = myVO.createRow();
    newRow.setAttribute("Id", myId);
    myO.insertRow(newRow);
    Thanks

    Hi,
    I also have problems with code above for inserting a new row.
    When I insert a new row in a table and click on column header (to change sorting), that row (and any other new row before committing) disappears from table. And if I commit that table (without missing row), the missing row reappears with next refresh.
    Selection in that table (using SelectOne component with Autosubmit=true) also doesn't work with new rows (with existing rows it works fine). Selection allways sticks on first inserted row!
    Something weird is happening here...
    Please help.

Maybe you are looking for