No sales order creation possible w/o credit limit

Hi Gurus,
I understand, in std SAP Sales orders are able to be created for customers with no established credit limit.
But my requirement is that,Until a credit limit is established for a customer, orders should not be allowed to be entered for him .
How can i achieve this?
Thanks in advance.
Reg,
JJ

You have to try this requirement with sale order exit in the program MV45AFZZ - USEREXIT_READ_DOCUMENT  or  USEREXIT_SAVE_DOCUMENT where you can consider the following tables and check any value is updated in any of these tables
KNKA:::::::: Customer master credit management: Central data
KNKK:::::::: Customer master credit management: Control area data
KNKKF1:::::Credit Management: FI Status Data
Only if any value is stored against that customer code, sale order should be saved.
thanks
G. Lakshmipathi

Similar Messages

  • Credit Managment: Sales Order last in update the Credit Limit

    Hello,
    I have a problem. When creating sales order with a few seconds of difference (from 1 to 5), the first sales order (that consumes all the credit limit) doesn´t reach to update the credit limit and for that reason the system permits to create the second one.
    I have an other case of two sales orders created in exactly the same time, so the system permited to create both of them.
    Do you think there is some solution for those cases?
    Thank you.
    Regards
    Jimena.-

    Hi Praveen,
    We use this functionality in that case for example you have two customer A and B.
    You want to maintain the credit limit 2000$ for both the customers.
    So we use this functionality, we assign the customer as credit account in another credit account.
    Now doesn't matter customer A buy the goods from you or customer B.
    System consider only 2000$ not 4000$.
    Hope it helps,
    Regards,
    MT

  • Open sales orders are not coming in credit exposure

    Hi,
    We have implemented FSCM credit management, when i am running credit exposure, i am able to see open items from FI (200) but not for open orders (100) & Delivery (400), we have created some sales orders, which have exceeded the credit limit, system should give us a warning message. Could anyone help me to overcome this issue.
    Thanks,
    Sai

    Hi Sai,
    Additionally, you should check the following BADI_SD_CM, if the implementation of that BADI is correct then it should work.
    Best regards,
    Cristobal.

  • Credit Check at Sales Order Creation  & Delivery Creation levels

    Hi
    I am using Dynamic Credit check, Assigned  credit group (with block) in OVAK for Sales Orders and for delivery types also assigned credit group.
    Issue is while creating Sales Order system is doing dynamic credit check and blocking the sales order but delivery block is not happening, then i am releasing block in VKM3. but while creating Delivery system is not doing dynamic credit check.
    requirement is in both levels system should check the credit check.
    Can any plz guide me.
    Prasad

    Hi
    It is not possible in the standard. The block at different levels is configured based on the degree of risk involved with the customer. If the customer is more risky, he should be blocked at ordr livel itself. If the customer is less risky, the order should be processed , like picking, packing etc., and only Goods Issue should be stopped.
    The release will be done by a responsible person and hence it should not block again. eg., if the order is released with special approval from a higher up like Marketing - GM, then it should not block the delivery again.
    Thanks,
    Ravi

  • Credit check for sales order creation using BAPI

    HI,
    I am using BAPI_SALESORDER_CREATEFROMDAT2 for creating sales order.
    I want the credit check for a customers credit limit done while creating the sales order. Is it possible to make
    credit check with above bapi? If it is possible please give me the solution.
    <b>Helpful answers will be rewarded</b>

    hi,
    it's the same code that is executed for the credit check in the bapi as in va01
    If you put in the correct data, see sap note 366265, the credit check will be executed
    kind regards
    Paul Q

  • Is it possible to avoid duplicate material in Sale order creation

    Dear SD gurus
    Is it possible to avoid material duplication in va01 sale order creation. For amendment purpose the marketing user making new line item with amended qty instead of quantity change. kindly advise me to solve the problem.
    Thanks & Regards
    R.Udayakumar

    HI,
    There's no alternative to user disciplibe . Business reqt are sometimes like this only
    what you can do is use exit mv45afzz in saels order and put coding logic . this will surely work.
    {Removed by Moderator}
    regards
    Edited by: Lakshmipathi on Aug 29, 2009 6:13 PM

  • Sales order creation is not possible for this notification type

    Hello,
    I want to create Sales Order through following menu:
    Notification -- Functions - Sales order - CreateSelection of Order Type.
    But I get following message:
    'Sales order creation is not possible for this notification type'
    The message says: No sales order type is assigned to the notification type.
    But I did not find any such configuration where I can assign notification type to Sales Order document type.
    Please help.
    regards

    Transaction OIM9
    Menu Path
    Customizing > Plant Maintenance and Customer Service > Maintenance and Service Processing > Maintenance and Service Notifications > Notification Creation > Notification Types > Define Order Types and Special Notification Parameters
    Nomally CS (customer service) area use this function.
    Regards
    Luke

  • What are the User Exits for Sales Order creation process?

    Hi,
    what are the User Exits for Sales Order creation process? how can I find them?
    thanks in advance,
    will reward,
    Mindaugas

    Please check this info:
    User Exits In Sales Document Processing
    This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
    Involved program components
    System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
    MV45ATZZ
    For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
    MV45AOZZ
    For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
    MV45AIZZ
    For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
    MV45AFZZ and MV45EFZ1
    For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
    User exits in the program MV45AFZZ
    The user exits which you can use for modifications in sales document processing are listed below.
    USEREXIT_DELETE_DOCUMENT
    This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
    For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
    The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
    USEREXIT_FIELD_MODIFICATION
    This user exit can be used to modify the attributes of the screen fields.
    To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
    The usage of the field groups (modification group 1-4) is as follows:
    Modification group 1: Automatic modification with transaction MFAW
    Modification group 2: It contains 'LOO' for step loop fields
    Modification group 3: For modifications which depend on check tables or on other fixed information
    Modification group 4: is not used
    The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
    This FORM routine is called up by the module FELDAUSWAHL.
    See the Screen Painter manual for further information on structuring the interface.
    USEREXIT_MOVE_FIELD_TO_VBAK
    Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
    The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBAP
    Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
    The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBEP
    Use this user exit to assign values to new fields at the level of the sales document schedule lines.
    The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBKD
    Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
    The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
    USEREXIT_NUMBER_RANGE
    Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
    The user exit is called up in the FORM routine BELEG_SICHERN.
    USEREXIT_PRICING_PREPARE_TKOMK
    Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
    USEREXIT_PRICING_PREPARE_TKOMP
    Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
    USEREXIT_READ_DOCUMENT
    You use this user exit if further additional tables are to be read when importing TA01 or TA02.
    The user exit is called up at the end of the FORM routine BELEG_LESEN.
    USEREXIT_SAVE_DOCUMENT
    Use this user exit to fill user-specific statistics update tables.
    The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
    Note
    If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
    USEREXIT_SAVE_DOCUMENT_PREPARE
    Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
    The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
    User exits in the program MV45AFZA
    USEREXIT_MOVE_FIELD_TO_KOMKD
    Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
    USEREXIT_MOVE_FIELD_TO_KOMPD
    Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
    USEREXIT_MOVE_FIELD_TO_KOMKG
    Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
    USEREXIT_MOVE_FIELD_TO_KOMPG
    Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
    USEREXIT_REFRESH_DOCUMENT
    With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
    For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
    The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
    The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
    User-Exits in program MV45AFZB
    USEREXIT_CHECK_XVBAP_FOR_DELET
    In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
    USEREXIT_CHECK_XVBEP_FOR_DELET
    In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
    USEREXIT_CHECK_VBAK
    This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
    USEREXIT_CHECK_VBAP
    This user exit can be used to carry out additional checks (e.g. for completion) at item level.
    USEREXIT_CHECK_VBKD
    The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
    USEREXIT_CHECK_VBEP
    This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
    USEREXIT_CHECK_VBSN
    You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
    USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
    USEREXIT_FILL_VBAP_FROM_HVBAP
    You can use this user exit to fill additional fields in the sub-item with data from the main item.
    USEREXIT_MOVE_FIELD_TO_TVCOM_H
    You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
    USEREXIT_MOVE_FIELD_TO_TVCOM_I
    You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
    User-Exits for product allocation:
    The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
    USEREXIT_MOVE_FIELD_TO_COBL
    Option to include new fields in structure COBL.
    USEREXIT_COBL_RECEIVE_VBAK
    Option to assign values from the document header to the new fields.
    USEREXIT_COBL_RECEIVE_VBAP
    Option to supply values from the item to the new fields.
    USEREXIT_COBL_SEND_ITEM
    A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
    USEREXIT_COBL_SEND_HEADER
    A changed field can be copied from the structure to the header (see source text MV45AFZB)
    USEREXIT_SOURCE_DETERMINATION
    You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
    USEREXIT_MOVE_FIELD_TO_ME_REQ
    With this user exit you can include additional fields for the following fields:
    EBAN (purchase requisition)
    EBKN (purchase requisition-account assignment)
    USEREXIT_GET_FIELD_FROM_SDCOM
    Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
    USEREXIT_MOVE_WORKAREA_TO_SDWA
    You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
    User-Exits for first data transfer:
    The following user exits can only be used for the first data transfer.
    Note
    Only use the user exits if the names/fields do NOT have the same name.
    USEREXIT_MOVE_FIELD_TO_VBAKKOM
    Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
    USEREXIT_MOVE_FIELD_TO_VBAPKOM
    Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
    USEREXIT_MOVE_FIELD_TO_VBEPKOM
    Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
    USEREXIT_MOVE_FIELD_TO_VBSN
    You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
    USEREXIT_MOVE_FIELD_TO_KOMKH
    You can use this user exit to include new fields for batch determination (document header).
    USEREXIT_MOVE_FIELD_TO_KOMPH
    You can use this user exit to include new fields for batch determination (document item).
    USEREXIT_CUST_MATERIAL_READ
    You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
    USEREXIT_NEW_PRICING_VBAP
    Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
    USEREXIT_NEW_PRICING_VBKD
    Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
    User-Exits in Program MV45AFZD
    USEREXIT_CONFIG_DATE_EXPLOSION
    The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
    User exits in the program FV45EFZ1
    USEREXIT_CHANGE_SALES_ORDER
    In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
    If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
    User-Exits in Program RV45PFZA
    USEREXIT_SET_STATUS_VBUK
    In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
    The following workareas are available for this user exit:
    VBUK (header status)
    FXVBUP (item status)
    FXVBUV (Incompletion)
    USEREXIT_SET_STATUS_VBUP
    In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
    The following workareas are available for this user exit:
    FXVBAP (Item data)
    FXVBAPF (Dynamic part of order item flow)
    FXVBUV (Incompletion)
    USEREXIT_STATUS_VBUK_INVOICE
    You can use this user exit to influence billing status at header level.
    User exits in the screens
    Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
    Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
    For field transports, you do not have to make changes or adjustments.
    Example
    A new field, VBAK-ZZKUN, should be included in table VBAK.
    If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
    User Exits in Program MV45AFZ4
    USEREXIT_MOVE_FIELD_TO_KOMK
    You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
    USEREXIT_MOVE_FIELD_TO_KOMP
    You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
    User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
    EXIT_SAPFV45P_001
    You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
    Regards
    Eswar

  • 100% advance payment during sales order creation

    Dear Experts,
               One of our international client is having one requirement for collecting the 100% advance payment from customer during sales order creation itself. Our customer is in Germany.
    For high risk customers they want to collect the advance payment for 100%. And if this 100% advance payment was not paid by customer then, sales order should not be processed.
    And during regular sales invoice creation the same down payment also needs to be displayed in the invoice as advance payment.
    Is it possible to setup this process using milestone billing.?? .or some other process is available to setup this process.
    Thanks for your cooperation.
    Warm Regards,
    Velmurugan

    Hi
    Try with this with Credit management.Put High Risk with Error message.
    When ever you will Create Sales Order it will Block due to Credit Chech.For this scenario Enter the Parking  Vale at F-66.
    Then make a entry for Customer-CR to BANK-DR.
    This may solve ur requirement.
    Regards
    JS

  • Sap afs - how to customize matrix grid in sales order creation

    Hello,
    can anyone help to understand how to customize the matrix grid shown at sales order creation/change (VA01 - AFS Item overview tab - Matrix entry pushbutton). Here system, starting from inserted material nr, shows all possible combination from material's sales grid. The requirement asks to manage the matrix grid before it is shown to the user.
    Thanks in advance for your help
    maurizio

    Hi
    It depends on master data of your material
    Max

  • Automatic Sales Order Creation from PO in B1

    Hi,
    I have this scenario. Purchase order is created in SAP B1 (Business One) which triggers automatic Sales Order creation in SAP ECC 6.0.
    The requirement:
    For the combination of PO number and Sold to party there should be only one sales order created.
    The problem:
    Sometimes for the same PO duplicate Sales orders(sometimes 3,4) are getting created in ECC.
    Possible causes:
    Probably no validations in the interface.
    Question:
    1. First of all, is it an SD issue or PI (process integration) issue.
    2. If it is an SD issue, as a functional consultant what / where can we do to prevent this.
    Thanks.
    Edited by: SAP SD_Newbie on Oct 20, 2011 6:59 PM
    Edited by: SAP SD_Newbie on Oct 20, 2011 6:59 PM
    How do I move this to "ERP - Sales and Distribution (SD) General", because this question is not just related to "ERP SD Sales" but SD in general. Isn't there an option for the users to a question from one forum to another.

    1. First of all, is it an SD issue or PI (process integration) issue.
    - May be PI, or SD or both. I am not sure about the integration mechanism/program so I am not able to pinpoint.
    2. If it is an SD issue, as a functional consultant what / where can we do to prevent this.
    In t.code VOV8, go to the sales document type. Select value A in the field, check Purchase order Number. Then go to t.code OVAH, there make the message number V4 115 as error message. This will not allow the creation of the sales order, if the Purchase order number duplicates. I assume in your process, the purchase order number is populated in the PO number field of the sales order overview screen.
    Regards,

  • Block sales order creation based on material qty

    Hi,
      In my scenario i want to block the sales order creation based on material qty , how i can do this?
    Example:
    Material qty below 100 = able to create sales order
    Material qty above 100 = not able to create SO
    Thanks,
    Arun

    Hi
    For restricting the order if it is less than a specified qty, you can maintain the 'min order qty' in material master.
    But your requirement is the other way round - Restrict order if it is more than specified qty.
    In this case, you need to use the following sales order exit  in progran MV45AFZZ
    u2022     USEREXIT_SAVE_DOCUMENT_PREPARE
    Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
    The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
    Hope this helps.
    Regards
    Madhu

  • Sales order creation using webdynpro in ABAP

    Plz give the process how to create sales order creation using webdynpro in ABAP. if not possible plz let me know how to create in JAVA.
    It is very urgent. I hope i will get it very soon.
    Thanks all
    Sai

    In your WDA application,  all you need to do is call the BAPI BAPI_SALESORDER_CREATEFROMDAT2 when the user clicks some button.  Most likely, you can put the code for this BAPI call in the onAction method for your button. 
    Regards,
    Rich Heilman

  • User exit to control the sales order creation

    Hi All,
    I have a business scenario, where a specific account group customers Business doesn't want to sell the goods .SAP should not allow you to create a sales order.
    Which user exit will solve my requirement?
    could you please help me..
    Regards,
    SK

    Hi Prakash,
    Thanks for the reply. Actually these customers are created as a Agents and we are using these customers in Commission rebates. So at the time of Rebate partial credit memo, then these agents should be active otherwise system will give the error.
    So what i am thinking is, Standard sales order creation needs to be restricted so that users can not able to create standard order.
    So can you suggest is there any user exit can be used to prevent creation of standard order for these account group and order type xxx?
    Regards,
    SK

  • Reg:IDOC -sales order creation

    Hi All,
         I am trying  to create sales order through IDOCS.Basic type is SALESORDER_CREATEFROMDAT201.
    My requirement is to know any user-exits where in I need to add to my code to hardstop sales order creation if the storage location which I am passing is marked for deletion.
    Kindly reply as soon as possible.
    Regards,
    Kaveri

    Hi,
    Check this one it will help u how to enhance the idocs.
    If we wnat to extend the idoc use the segments for adding the fields. use the tcode WE30 and we31.
    Please reward points if it is useful.
    Go through the following Steps For ALE/IDOC
    ALE IDOC
    Sending System(Outbound ALE Process)
    Tcode SALE ? for
    a) Define Logical System
    b) Assign Client to Logical System
    Tcode SM59-RFC Destination
    Tcode BD64 ? Create Model View
    Tcode BD82 ? Generate partner Profiles & Create Ports
    Tcode BD64 ? Distribute the Model view
    Message Type MATMAS
    Tcode BD10 ? Send Material Data
    Tcode WE05 ? Idoc List for watching any Errors
    Receiving System(Inbound ALE )
    Tcode SALE ? for
    a) Define Logical System
    b) Assign Client to Logical System
    Tcode SM59-RFC Destination
    Tcode BD64 ? Check for Model view whether it has distributed or not
    Tcode BD82 -- Generate partner Profiles & Create Ports
    Tcode BD11 Getting Material Data
    Tcode WE05 ? Idoc List for inbound status codes
    ALE IDOC Steps
    Sending System(Outbound ALE Process)
    Tcode SALE ?3 for
    a) Define Logical System
    b) Assign Client to Logical System
    Tcode SM59-RFC Destination
    Tcode BD64 !V Create Model View
    Tcode BD82 !V Generate partner Profiles & Create Ports
    Tcode BD64 !V Distribute the Model view
    This is Receiving system Settings
    Receiving System(Inbound ALE )
    Tcode SALE ?3 for
    a) Define Logical System
    b) Assign Client to Logical System
    Tcode SM59-RFC Destination
    Tcode BD64 !V Check for Model view whether it has distributed or not
    Tcode BD82 -- Generate partner Profiles & Create Ports
    Tcode BD11 Getting Material Data
    Tcode WE05 !V Idoc List for inbound status codes
    Message Type MATMAS
    Tcode BD10 !V Send Material Data
    Tcode WE05 !V Idoc List for watching any Errors
    1)a Goto Tcode SALE
    Click on Sending & Receiving Systems-->Select Logical Systems
    Here Define Logical Systems---> Click on Execute Button
    go for new entries
    1) System Name : ERP000
    Description : Sending System
    2) System Name : ERP800
    Description : Receiving System
    press Enter & Save
    it will ask Request
    if you want new request create new Request orpress continue for transfering the objects
    B) goto Tcode SALE
    Select Assign Client to Logical Systems-->Execute
    000--> Double click on this
    Give the following Information
    Client : ERP 000
    City :
    Logical System
    Currency
    Client role
    Save this Data
    Step 2) For RFC Creation
    Goto Tcode SM59-->Select R/3 Connects
    Click on Create Button
    RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
    give the information for required fields
    RFC Destination : ERP800
    Connection type: 3
    Description
    Target Host : ERP000
    System No:000
    lan : EN
    Client : 800
    User : Login User Name
    Password:
    save this & Test it & RemortLogin
    3)
    Goto Tcode BD64 -- click on Change mode button
    click on create moduleview
    short text : xxxxxxxxxxxxxx
    Technical Neme : MODEL_ALV
    save this & Press ok
    select your just created modelview Name :'MODEL_ALV'.
    goto add message type
    Model Name : MODEL_ALV
    sender : ERP000
    Receiver : ERP800
    Message type :MATMAS
    save & Press Enter
    4) Goto Tcode BD82
    Give Model View : MODEL_ALV
    Partner system : ERP800
    execute this by press F8 Button
    it will gives you sending system port No :A000000015(Like)
    5) Goto Tcode BD64
    seelct the modelview
    goto >edit>modelview-->distribute
    press ok & Press enter
    6)goto Tcode : BD10 for Material sending
    Material : mat_001
    Message Type : MATMAS
    Logical System : ERP800
    and Execute
    7)goto Tcode : BD11 for Material Receiving
    Material : mat_001
    Message Type : MATMAS
    and Execute --> 1 request idoc created for message type Matmas
    press enter
    Here Master Idoc set for Messge type MATMAS-->press Enter
    1 Communication Idoc generated for Message Type
    this is your IDOC
    Change Pointers
    I know how to change the description of a material using ALE Change Pointers.
    I will give the following few steps
    1) Tcode BD61---> check the change pointers activated check box
    save and goback.
    2) Tcode BD50---> check the MATMAS check box save and comeback.
    3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
    4) Tcode BD52---> give message type : matmas press ok button.
    select all what ever you want and delete remaining fields.
    save & come back.
    5) 5) go to Tcode MM02 select one material and try to change the description and save it
    it will effects the target systems material desciption will also changes
    6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
    give Message type : MATMAS and Executte
    ALE/IDOC Status Codes/Messages
    01 Error --> Idoc Added
    30 Error --> Idoc ready for dispatch(ALE Service)
    then goto SE38 --> Execute the Program RBDMIDOC
    29 Error --> ALE Service Layer
    then goto SE38 --> Execute the Program RSEOUT00
    03 Error --> Data Passed to Port ok
    then goto SE38 --> Execute the Program RBDMOIND
    12 Error --> Dispatch ok
    Inbound Status Codes
    50 Error --> It will go for ALE Service Layer
    56 Error --> Idoc with Errors added
    51 Error --> Application Document not posted
    65 Error --> Error in ALE Service Layer
    for 51 or 56 Errors do the following steps
    goto WE19 > give the IDOC Number and Execute>
    Press on Inbound function Module
    for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
    regards,
    satish.

Maybe you are looking for