No sample data in client 001

Dear friends,
I have just installed IDES. But in client 001, there is a few sample data in it.
What should I do to reach sample datas?
Thanks in advance

HI,
001 is copy of 000 client, if you install ides and want sample data from IDES use client 800
regards,
kaushal

Similar Messages

SCM APO can we copy the data from client 001 to client 002???

Hi Guru's
SCM APO can we copy the data from client 001 to client 002???
If it is possibulity please let me know?
Regards,
Sree

Yes you can do.
Tcode SCCL.
Options :
When copying clients, you can select what you want to transfer from the source client to the target client:
User masters: You select this option, for example, if you want to give all users of an existing client the same authorizations in the target client.
Client-specific Customizing: You select this option, for example, if you want to set up a new client in an existing system.
Client-specific Customizing and master/transaction data:
You select this option, for example, if you want to set up a test client that is identical to the production client (in the same system).
Client-specific and cross-client Customizing: You select this option, for example, if you want to set up a quality assurance system based on the production client of another system.
Client-specific and cross-client Customizing and master/transaction data: You select this option, for example, if you want to set up a test client based on the production client of another system.
http://help.sap.com/saphelp_46c/helpdata/EN/69/c24c4e4ba111d189750000e8322d00/frameset.htm

BP 258 Sample Data Load

Hello,
I've configured the prereq's for the Best Practices for BPC MS 7.5 (V1.31) and am on BP 258 trying to upload the sample data provided (258_Y2010_Sales_Actual.txt). When I run the DM package for IMPORT, it errors out with :
Task Name : Convert Data
Dimension list          CATEGORY,P_CC,RPTCURRENCY,TIME,CUSTOMER,PRODUCT,SALESACCOUNT,AMOUNT
[2010.004] Calculated member or invalid member          ACTUAL,SALESTEAM1,USD,2010.004,CUSTOMERA,PRODUCTA,SalesUnitPrice,-15000
[2010.004] Calculated member or invalid member          ACTUAL,SALESTEAM1,USD,2010.004,CUSTOMERA,PRODUCTA,SalesQuantity,200
[2010.004] Calculated member or invalid member          ACTUAL,SALESTEAM1,USD,2010.004,CUSTOMERA,PRODUCTA,TotalSalesRevenue,-3000000
All I can figure from this limited info is that it does not like the conversion of the TIME dimension. I checked my dim members and have time dim's covering the ones shown in the file (2010.004 for example). The BP doc says nothing about maintaining the conversion file or a custom transformation file - it says to leave that empty to default to IMPORT.xls.
I just finished the BPC 410 course, but can't correlate what we did to this error (or I missed it).
Can anyone shed some light on this error?
thanks

Thank you for responding. I ran through all checks and all are OK to me.
1 - Optimize all green no errors
2 - Yes I already checked this but am not 100% sure I am seeing what the system is seeing. My dim members include the TIME items that exist in the sample data. Only one value did not exist = members start on 2010.004 and sample data included 2010.001. I removed those records, but it still fails.
Here is the reject list:
Task Name : Convert Data
[Dimension: TIME]
2010.007
2011.002
2010.005
2010.008
2011.001
2010.006
2011.003
2010.011
2010.004
2010.001
2010.012
2010.009
This tells me (an inexperienced BPC person) there is a problem in conversion of the external to internal data for that dimension. However, I have already validated that they are equal - I can't see how 2010.004 does not equate to 2010.004, unless it is comparing to the EVDESC and not the ID (2010.004 versus 2010 APR). Am I correct on that assumption?
3 - Yes I've also tried changing to a new transformation file with conversion and delimiters differently mapped, but all the same result. I'm sure I am missing something trivial here! So I do appreciate any help to figure that out.
Thanks again

Message 'can only work in client 001 during data transfer

Hello Experts,
Recently I setup a interface between ECC and SCM system for EWM, my data transfer was working fine until last couple of days when I getting this error message on the SCM side.
Message in CFM2 comes up as
Function/Q/SAPAPO/CIF_LOC_INBOUND
Text: You can only work in client 001
And not sure why because I have not made any changes to settings.
Can someone please suggest what might be going wrong and what needs to be done?
Thanks
Bhaskar

Hi Bhaskar,
I have not worked on EWM, and don't know if CIF connectivity is used differently.
But let me try to propose a general way forward based on your error message.
It seems that your CIF data is trying to reach a client where you are not authorized to work, or where CIF settings are not maintained properly.
Should be linked to RFC connectivity between R/3 and APO (unless it's due to some SAP bug).
Check out the following:
1) Which APO client is your CIF model pointing to? You would most likely be able to find this out by seeing the name of "logical system" for your CIF Integration Model (IM). It seems the CIF IM is pointing to some client which is something other than client 001.
Also, my guess would be that this client that you maintained in CIF IM is no longer having settings relevant for CIF, or something else.
2) Go to your APO system, and again cross-check which client you are using. Next go to /n/sapapo/cq and see which R/3 systems are having active connections to your APO system. The "logical system" corresponding to your R/3 system/client should be there in the list. if not, ask your Basis team if they made any changes recently.
PS: I would assume that you should get this same error for CIF of any object, not only material (unless the corresponding IM points to a different client in APO).
Let me know the results of your checks, and if this helps you in finding out the root cause.
PS: Logical system normally would have a naming convention like <System name>CL<Client>. e.g. PR1CL310. Here PR1 is system name and client is 310.
Thanks - Pawan

Sample Data in ORDM

I have just installed the ORDM with the Sample Schema and Reports.
Can someone please clarify
1.Where are the sample reports generated?
2.Is there a Sample RPD file also generated? If yes,where?
Regards,
Akshatha
Edited by: 887460 on Nov 10, 2011 11:16 PM

HI,
001 is copy of 000 client, if you install ides and want sample data from IDES use client 800
regards,
kaushal

Steps to create a logical system for client 001.

Hi,
In client 000 go to transaction scc4. There you create your new client for sap netweaver abap trial version for BI?
Here, can you give me steps to create a logical system with client 001 using tcode scc4.
Thanks,
Kannan

hi
     First log on to SAP R/3 server connections Go to SCC4 in R/3 & in Scc4 BW server. A screen opens in that logical name of the system would be opened in both (R/3 & BW).
     Take notepad in it save .R/3 & BW logical names go to R/3 & click SM59 to create R/3 connections click then a screen opens gives BW logical name in RFC Destination option & give connection. type 3 & give some description & then press enter.
     You will get another screen under it then at target host gives BW server name we will get it from BW logon change ID, IP address option & give the system no. The system no go to logon pad just drag it then you will see the name.
     Then click on log on securities go to log on give BW server details like No, client user Password. Then save it then click test connection tab if there are errors then it gives yellow color if they are no error the whole thing come as white.
     Then click on the Remote Logon then we go to BW server give RFC SM59 & click create. Then give the server name which is at the bottom right corner give it then give the no, name, password in logon Security save it & test connection & then remote logon.
     R/3 - B W - R/3
     Logical connection source system connection is used to transfer the data from R/3 to BW. Go to BW system& click RSA1 go to source system option go to top to the source systems right click on it. Then click create then a screens opens then.
     PC Flat file , DB  Database
     Select the option manual then a screen appears RFC Destination, Logical source name then click OK then it goes to opens other screen save it test connection then remote login then it go back to the then a screen opens then click only activate.
     BW  RS1  SOURCE SYSTEM  CREATE MANUAL AUTOMATIC CELL
     R/3  Test connections login  back  replicate method  active data R/3 Source system you will able to.
regards
ashwin

Logical system for client 001 for SAP NETWEAVER ABAP TRIAL VERSION for BI

Hi,
I have installed SAP NETWEAVER ABAP TRIAL VERSION for BI. In that I have to create logical system for client 001. I have taken a list of available clients from the abap R3 side. Here is a list of it.
Clients View
Cl. Name City Crcy
000 SAP AG Konzern Walldorf EUR
001 Auslieferungsmandant R11 Kundstadt USD
066 Test EarlyWatch Profiles Walldorf EUR
I cannot get inside the BW side for it asks me to create a logical system for client 001. What to do?
Kindly help me.
Kannan

hi,
? First log on to SAP R/3 server connections Go to SCC4 in R/3 & in Scc4 BW server. A screen opens in that logical name of the system would be opened in both (R/3 & BW).
? Take notepad in it save .R/3 & BW logical names go to R/3 & click SM59 to create R/3 connections click then a screen opens gives BW logical name in RFC Destination option & give connection. type 3 & give some description & then press enter.
? You will get another screen under it then at target host gives BW server name we will get it from BW logon change ID, IP address option & give the system no. The system no go to logon pad just drag it then you will see the name.
? Then click on log on securities go to log on give BW server details like No, client user Password. Then save it then click test connection tab if there are errors then it gives yellow color if they are no error the whole thing come as white.
? Then click on the Remote Logon then we go to BW server give RFC SM59 & click create. Then give the server name which is at the bottom right corner give it then give the no, name, password in logon Security save it & test connection & then remote logon.
? R/3 - B W - R/3
? Logical connection source system connection is used to transfer the data from R/3 to BW. Go to BW system& click RSA1 go to source system option go to top to the source systems right click on it. Then click create then a screens opens then.
? PC ?Flat file , DB ? Database
? Select the option manual then a screen appears RFC Destination, Logical source name then click OK then it goes to opens other screen save it test connection then remote login then it go back to the then a screen opens then click only activate.
? BW ? RS1 ? SOURCE SYSTEM ? CREATE MANUAL AUTOMATIC CELL
? R/3 ? Test connections login ? back ? replicate method ? active data R/3 Source system you will able to.
hope it helps u
Ramesh

Sample Data For Primavera Unifier

Hi all,
Are there sample data available for use with Primavera Unifier? I could not locate on edelivery.oracle.com or on My Oracle Support. Does anyone knows when that will be made available?
Sachin Gupta

There are packages of pre-defined BP's available on edelivery, but as another post mentions, there is no "sampe" data or setup because Unifier is a platform and it is expected that each client will have their own very customized needs for data setup and configuration. Where P6 and PCM provide sample projects based on some standard construction methodologies, Unifier provides more of an blank canvas to build exactly what the client wants rather than fit into a standard pre-existing methodology.
I'm sure this is the primary reason that you haven't seen them publish any sample configuration/setup of the Company Workspace/Shell.
The other consideration here is that there are areas in Unifier that cannot be simply "deleted" once things are set up--which would mean that you might be faced with seeing things in your environment that are no longer valid for your workspace.

Oracle EBS sales n orders sample data

Hi,
I need to Oracle EBS R12.1.3 or above sales n orders sample data. I have Vision instance but sales n orders n marketing sample is not available there.
Can any one let me know where can i get sample ebs data.
Thanks,

At one client, we had a similar situation. The ATO models were huge and the * numbers were shipped to different locations.
We tried various solutions - none of them were perfect.
Say we had one configuration that needed to be sent to 5 locations for a customer - qty 10 each.
0) Created 5 lines with different location. Configured each of them.
1) We configured one line qty 10. Then we copied the line and changed the location.
2) We configured one line for 50. And then we split the line in 5 lines of 10 each and then changed location.
3) This was an interesting approach. We created a dummy order first - configured it and progressed it to get a * number. And then we created a "real" order and simply put the * number on 5 lines - qty 10 each. Then the dummy order was killed.
Again, each of this approach had pros/cons. You have to evaluate if they make sense to you. A lot depends on if you reuse * numbers for matching configurations or not.
Hope this helps
Sandeep Gandhi
Independent Techno-functional Consultant
513-325-9026

Loading BI Apps with demo (sample) data

I would like to load the out of the box OBI apps with sample data from Oracle so that the clients see how Emoployee Expense reports would look like. does anyone know how to go about it . In simple terms , this is more like using BISAMPLE schema in OBIEE. Any help willl be greatly appreciated.

Are you asking for sample data for the Fusion Applications similar to what EBS had with the "Vision" database, e.g. data populated in the Fusion Applications schema OOTB ? If so unfortunately such data is not available.
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

PI7.1 change the default client 001

HI.
I want to change the client from 001 to 100 in PI7.1.
The configuration wizard configure JAVA, to connect client 001.
What is the advantage and dis-advantage to change the client.
regards,

Hi,
If you will go to SLD. There you can be able to understand the concept of it.
The heirarchy is :
Technical Sytem can have different Client numbers
Each Client Number is related to one bussiness system.
And only for SAP system client numbers are required.
You will be provided with a specific client to logon to. A client is a separete data environment within SAP. You must use the client number provided for you or your attempts to login to the system will fail.
May be this will be helpful to understand the use of client number in R/3 system to connect to XI/PI
Regards,
Nutan

[svn:bz-trunk] 8678: Bug: BLZ-255 - trader desktop sample with per-client-qos-polling-amf channel is confusing

Revision: 8678
Author:   [email protected]
Date:     2009-07-20 01:20:31 -0700 (Mon, 20 Jul 2009)
Log Message:
Bug: BLZ-255 - trader desktop sample with per-client-qos-polling-amf channel is confusing
QA: No
Doc: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-255
Modified Paths:
    blazeds/trunk/apps/samples/WEB-INF/flex-src/traderdesktop/src/traderdesktop.mxml

View data in client B from client A in the same SID without a valid logon?

Hi Folks
We are planning on upgrading our 4.6C system to ERP 6.0, and are initialy considering having two clients in the same sandbox SID. One would be for the developers to perform code remediation checks (client A), and one would contain a copy of production data for performing testing of functionality over live data (client B).
Would it be possible to view data in client B from client A in the same system without a valid logon to client B or RFC connection to client B from client A? For example via the use on an ABAP program to SQL the database?
I know one can use transactions like SM30/SM31 to view, compare, and adjust data between clients, but this requires an RFC connection and valid logon to the target client.
Regards
Kevin.

Hi Kevin.
>
Kevin McLatchie wrote:
> Would it be possible to view data in client B from client A in the same system without a valid logon to client B or RFC connection to client B from client A? For example via the use on an ABAP program to
Short answer: yes.
If someone has the right to write and execute ABAP reports on the system he is able to access the data of all clients. So I don't think that this setup is advisable. Don't mix development and production data in one system.
Best regards,
Jan

UDI-00018: Data Pump client is incompatible with database version 11.2.0.1

Hi
I am trying to import data in Oracle 11g Release2(11.2.0.1) using impdp utitlity and getting below errror
UDI-00018: Data Pump client is incompatible with database version 11.2.0.1.0
Export dump has taken in database with oracle 11g Release 1(11.1.0.7.0) and I am trying to import in higher version of the database. Is there any parameter I have to set to avoid this error?

AUTHSTATE=compat
A__z=! LOGNAME
CLASSPATH=/app/oracle/11.2.0/jlib:.
HOME=/home/oracle
LANG=C
LC__FASTMSG=true
LD_LIBRARY_PATH=/app/oracle/11.2.0/lib:/app/oracle/11.2.0/network/lib:.
LIBPATH=/app/oracle/11.2.0/JDK/JRE/BIN:/app/oracle/11.2.0/jdk/jre/bin/classic:/app/oracle/11.2.0/lib32
LOCPATH=/usr/lib/nls/loc
LOGIN=oracle
LOGNAME=oracle
MAIL=/usr/spool/mail/oracle
MAILMSG=[YOU HAVE NEW MAIL]
NLSPATH=/usr/lib/nls/msg/%L/%N:/usr/lib/nls/msg/%L/%N.cat
NLS_DATE_FORMAT=DD-MON-RRRR HH24:MI:SS
ODMDIR=/etc/objrepos
ORACLE_BASE=/app/oracle
ORACLE_HOME=/app/oracle/11.2.0
ORACLE_SID=AMT6
ORACLE_TERM=xterm
ORA_NLS33=/app/oracle/11.2.0/nls/data
PATH=/app/oracle/11.2.0/bin:.:/usr/bin:/etc:/usr/sbin:/usr/ucb:/home/oracle/bin:/usr/bin/X11:/sbin:.:/usr/local/bin:/usr/ccs/bin
PS1=nbsud01[$PWD]:($ORACLE_SID)>
PWD=/nbsiar/nbimp
SHELL=/usr/bin/ksh
SHLIB_PATH=/app/oracle/11.2.0/lib:/usr/lib
TERM=xterm
TZ=Europe/London
USER=oracle
_=/usr/bin/env

Time doesn't match sampled data?

Hallo all experts,
I write a LV code which reads data from USB 6211 and saves them with time instants in a text file, but the time instants don't correspond the sampled data. The time values are generated by elapsed time, after build array with the data read from DAQ, they are fed to the write to a text file. The test signal is 10 Hz, but the text file yields 0.2 Hz signal. How could I synchronize them?
Any tips are highly appreciated.
win2

Don't use the "elapsed time" express VI for precision timings. It seems to have limited resolution (internally, it converts a timestamp to DBL).
You can use e.g. the tick count to keep track of the time. See the attached comparison. (still there will always be some subtle differences due to the software timings).
LabVIEW Champion . Do more with less code and in less time .
Attachments:
usb6211_forumMOD.vi ‏42 KB

No sample data in client 001

Similar Messages

Maybe you are looking for