No sample in BOE 3.0

HI,
I have installed BO XI 3.0 on windows. Everything is working fine.
But I do not see sample universes and reports That we do  we XI R2 after installation.
Do we need to add it manually or any other way.
Any pointer would be very helpful
--Kuldeep

Hello Kuldeep,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

Similar Messages

  • Where can I find BOE XI R1 sample auditing reports?

    Hi there,
    I'm trying to track down the auditing reports that came with or were available for BusinessObjects Enterprise XI R1. Does anyone know where I can find these? The sample auditing reports for XI R2 are easy to find (with the accompanying Universe), but the XI R1 reports seem to be lost..
    Thanks!
    Allan

    Hi Allan,
    When BusinessObjects Enterprise XI Release 2 was first installed, a custom install was used and sample reports were not selected.
    The sample audit reports and universe connection information are contained in the file m29.cab. This file is located in the win32 folder of the installation media.
    Perform the following steps:
    1. Open the m29.cab file using an uncompression tool, such as WinZip.
    2. Extract the file auditing_rpt_en_biar.65FF9700_720A_4759_AB8C_5E33BA2E32D3.
    3. Rename the extracted file to "auditing_rpt_en.biar".
    4. Depending on the type of auditing database you are using, extract the file auditing_db_<dbtype>.biar.65FF9700_720A_4759_AB8C_5E33BA2E32D3 file.
    5. Rename the extracted file to "auditing_db_<dbtype>.biar", where <dbtype> represents the database type you are using.
    6. Using the Import Wizard, import the biar file for the database connection first, and then the report biar file.
    These are the steps you have to follow as per the note.
    Hope this helps you.
    Regards,
    Abhijeet T.

  • Simple sample code to display a Crystal Report from Crystal Enterprise?

    I am looking for a sample application that will "simply" view a report stored on our Crystal Enterprise server. I have looked at "boesdk_net_samples_12.zip", but that isn't really what I am looking for. And, the "CrystalReportViewer" and "CrystalReportSource" add ins for Visual Studio seem to only work with a "local" file (instead of one Managed or UnManaged on our Crystal Enterprise server).
    Can anyone point me to the right place? (Navigating the SAP site is so damn confusing!)

    Hi Shayne,
    You are not clear on how you will know which report you want and for which user? You can query the CMS database for the user and get all of their reports but without knowing which report object ID to get you will need to have the user select one. Unless you simply assume you want the last one, but if you don't give them a choice and they miss one day, or what ever your parameter is to select, there will be no way to get back to that report.
    For sample code on how to query the BOE Server look in the Enterpise SDK samples. You do need to use managed code. I don't suggest going into the FRS\output folder to use unmanaged reporting. There are a lot of folders created and it's easier to simply query the CMS database to get the latest instance.
    Since you have BOE you should also have a support contract. I suggest you log a case on line in Service Market Place and get a dedicated Engineer to assist you.
    This may be simply easier for you to use the Personal Favorites folder of the user so they can browse all report instances belonging to them. I suggest you talk to the BOE Administrator for more info on what BOE is capable of doing. what you want is fairly easy to manage with Enterprise itself.
    Thank you
    Don

  • Internal error publishing Crystal report to BOE 3.1

    Trying to add a Crystal report to a BOE 3.1 server, via a JSP page, but it keeps failing with an internal error.  Currently I am using code that came directly from a published example, but the jsp always fails when it gets to the boInfoStore.commit.
    Current error message is
    An internal error occurred. An error was encountered. A description of the error
    is as follows:
    com.crystaldecisions.sdk.occa.managedreports.reportadd.internal.b: Adding
    Crystal Report "TestUpload.rpt" failed. An internal error occurred.
    I searched extensively and found people with similar errors due to version errors in required jar files, but I have checked extensively and I am sure all the jar files are in sync with the server, which is 3.1 SP6.
    When I take the exact same java code and copy it into a program object, I can run it successfully, it just won't run when called from jsp.  Any suggestions?
    A copy of the test jsp page is attached.

    Hello Benjamin,
    Please try the attached sample to publish a crystal report to enterprise.
    Convert the attached text file to JSP & do the necessary changes in the sample & if you want you can also add multiple crystal report path from your local disk in the code to publish in the enterprise in one go.
    Hope this help.
    Thanks,
    Shailendra

  • SDK sample code for Changing name of Exported file thru Webi schedule

    Hi experts,
    I am wanting to know if someone has got any sample Java SDK code which I can use to login to FTP and rename the pdf files generated from webi schedule script and append customised date format towards the end.

    Hi Prabhat,
    For online samples
    https://www.sdn.sap.com/irj/boc/samples
    For detalied descripation on BO SDK.
    https://www.sdn.sap.com/irj/boc/sdklibrary
    For BOE SDK guide.
    http://help.sap.com/businessobject/product_guides/boexir31/en/boesdk_java_dg_12_en.zip
    This would give you complete information on scheduling.
    For RE SDK guide.
    http://help.sap.com/businessobject/product_guides/boexir31/en/resdk_java_dg_12_en.zip
    This would give you information on how deal with Desktop intelligence report and Web intelligence report.

  • Need BOE XI R2 Trial Copy

    I need a trial copy of BusinessObjects Enterprise XI Release 2.  Where can I get it?
    I've searched within SAP.com and Googled the internet for it, too, but haven't found a useful link yet.
    Yes, I realize that BOE XI R2 is essentially obsolete, that it came out in 2005, and that the latest BOE XI version is now Release 3.1 (SP3); however, I need the older version because I am taking an SAP eLearning course (BOU215 Universe Design)  that is tailored for BOE XI R2.  (Don't ask me why I'm taking this older course!)
    I've downloaded the sample BusinessObjects Universe for the SAP eLearning BOU215 Universe Design course, and I need to install that Universe on BOE XI R2 to ensure that the screen displays given in the subject course are consistent with the test installation of BOE XI and the related Universe Designer application that comes with BOE XI R2, to my understanding.  
    Earlier today, I submitted a request online to SAP.com through its web-mail form, and asked: "May I obtain a download trial copy of BusinessObjects Enterprise XI R2 for the purpose of using it in conjunction with my SAP eLearning BOU215 Universe Design course?"   I am waiting for a reply, but as it is Saturday, I don't expect to get an answer until Monday.  
    In the mean time, if you can point me to a trial download of BOE XI R2 so that I can get ahead on my course now, I'd appreciate it.  
    Thank you!

    Use the below link:-
    https://websmp203.sap-ag.de/swdc
    Use your market place credentials and download the XI R2 version.
    FYI - The designer screen has not changed much on the newer version so even if you have a latest install, it won't matter much.
    Cheers.

  • Examples for RAS/BOE/Viewer SDK for Business Objects XI 3.1 (12.0)

    Hi, I am a newbie in Business Objects.
    I am trying to find some examples on how to view reports on separate Application server (JBoss) and retrieve reports from Business Objects server. Us I understood from forums/guides I need to use Viewer SDK or (BOE/RAS SDK).
    However I cannot find any examples for above mentioned SDKs to start from something.
    OIne of the places I came across is here: http://devlibrary.businessobjects.com/businessobjectsxi/en/en/Viewers_SDK/default.htm indeed it is only for v11, as well as others places I came across.
    Can anyone guide me with this?
    Thank you!

    Hello.
    Java samples can be found at the following location:
    http://wiki.sdn.sap.com/wiki/display/BOBJ/BusinessObjectsSDKSampleApplications
    Specifically, Business Objects Enterprise (including the Viewers SDK) samples can be found at the following location:
    http://wiki.sdn.sap.com/wiki/display/BOBJ/JavaBusinessObjectsEnterpriseSDKSamples
    RAS SDK samples can be found at the following location:
    http://wiki.sdn.sap.com/wiki/display/BOBJ/JavaRASSDK+Samples
    Hope this helps.
    Regards.
    - Robert

  • Crystla Report Samples not able to see in infoview

    Hi All,
    I have install the BOE XI 3.0 on one  system. i am not able to see the crystal report in infoview means when i clicked on any sample report  or any zreports developed by me but i can not see the data  . though i transfered it into PDF and then i can see it from infoview in PDF format, while i also want to see it in crystal report format also.
    My webi reports and dashboard can see from infoview but crystal report can't be able to see.
    Thanks & Regards,
    Komik Shah

    In IR I created all DT,MT,MM,MI but when I want to activate it in changelist I am able to see my fields.
    1. Make sure you have saved the objects.
    2. Go to changelist tab -> Under user select your username and check if you can see anything.
    Regards
    Soumen...

  • How to run the sample code using the sdk?

    Hi,
    I want to run the jsp code from the enterprize sdk available in the sdn community. Can any one tell me how to execute these jsp sample codes and what is the pre-requisite regarding the set up.
    I already have the deployment ready.
    thanks
    AMar

    Hi Amar,
    To execute samples code, it is same what is required for normal J2EE application.
    Make sure add all the jars to your web application.
    These jars can be found on your BO server installation if windows.
    For BOE XI 3.x
    C:\Program Files\Business Objects\common\4.0\java\lib
    C:\Program Files\Business Objects\common\4.0\java\lib\external
    For BOE XI R2
    C:\Program Files\Business Objects\common\3.5\java\lib
    C:\Program Files\Business Objects\common\3.5\java\lib\external
    Thanks,
    Praveen.

  • Iterate through CR on BOE

    I am a .NET developer given the task to extract all table values from all reports on our BOE server - could you please point me in the right direction as to which portion of your BOE API will allow me to:
    1. Iterate through all reports on a BOE server
    2. Iterate through all table values in a CR Report
    If you have any other suggestions or samples on the best way to do this please let me know.
    Thank you!

    Thank you for the references.  I can see now how to iterate through the infoobjects:
    InfoStore infoStore = (InfoStore) enterpriseSession.GetService("InfoStore");
    string queryString = "SELECT SI_NAME, SI_DESCRIPTION "
         + "FROM          CI_INFOOBJECTS "
         + "WHERE      SI_KIND = 'CrystalReport'";
    InfoObjects infoObjects = infoStore.Query( queryString );
    IEnumerator infoObjectsEnumer = infoObjects.GetEnumerator();
    while(infoObjectsEnumer.MoveNext())
        InfoObject crReport = (InfoObject) infoObjectsEnumer.Current;
        // iterate through object and extract values
       Report report = (Report)crReport;
    Can you please tell me what object I will need to cast the info object to in order to access it's table fields?

  • How can I install the sample rpts activity universe

    We have an install of boe xi r2 but no sample reports.  I created / setup the auditing database and downloaded the boexir2sp2 collaterals from the esd and need to know how to install?  Can the collaterals / sample reports be installed on a disk other than the system C: disk of the server running boe?

    Yes, we are using crystal reports. 
    I look at the Activity Universe properties and the connection = Auditing Connection
    I go to Universe Connections the connection named Auditing Connection Exists, but there are no other properties.
    The system DSN for the auditing database is on the server and named Crystal11Audit and does connect to the auditing database.
    I open crystal, connect to repository, under Enterprise items the Auditor folder exists and has the sample reports.
    I open the failed jobs report, set datasource locations, I see the report datasource, and the Universe Query
    I'm not sure how to:....
    Check whether the connection is fine or not, and it points to the correct Database Service.
    Use the proper client, if not using the DSN.
    I can navigate to current connections and use the dsn to the audit database and connect to the audit database but I don't know how to veriffy or reset the report to use that connection as I'm not getting any ability to 'replace with'  by selecting or creating any other connection...
    Hi Bart,
    Are you using Crystal Reports?
    We can check whether the connection is working fine or not, by creating a new report from the activity universe.
    Check whether the connection is fine or not, and it points to the correct Database Service.
    Use the proper client, if not using the DSN.
    If we are not able to create reports based on the activity universe, logon to the Universe Designer, and then import the Activity Universe, and then edit the connection to the 'Finish', and then export it, and try to create a new report.
    If we are able to create a new report, then we should be able to refresh sample reports.
    -Shreyash

  • How do I find, at-a-glance, the sample size used in several music files?

    How do I find, at-a-glance, the sample size used in several music files?
    Of all the fields available in a FInder Search, "Sample Size" is not available. Finder does offer a "Bits per Sample" field, but it only recognized graphic files and not music files.
    Running 10.8.5 on an iMac i5.
    I did search through a couple of communities but came up empty.
    Thank you,
    Craig

    C-squared,
    There is no View Option to allow display of a column of sample size. 
    For WAV or Apple Lossless files, it is available on the Summary tab (one song at a time, as you know).  For MP3 and AAC it is not available at all.
    You can roughly infer it from the files that are larger than expected for their time.
    99% of the music we use is at the CD standard of 16-bit, so I can guess that displaying it has never been a priority.  However, if you want to make a suggestion to Apple, use this link:
    http://www.apple.com/feedback/itunesapp.html

  • COGS update on other GL Account at the time of Free goods or Sample goods

    Hello,
    In sales process, Usually the at the time of Delivery, material document is created as
    DR COGS
    CR INVENTORY
    But in the case of free goods or bonus goods or samples: the account should not determines COGS instead it should determine another GL Account called as Free good -COGS expense A/c.
    How can we solve the issue.
    Regards,
    SK

    Hi Yasar,
    You need to create a new routine for calculate type.
    Do as below:
    1. Go to VOFM>Formulas>calc.rule Rebate InKd to create a new routine for calculate type.  for example 601.
    2. add the following code in this routine 601 and then save.
      USING L_FRM STRUCTURE KONDN_FRM.
    DATA: VORKOMMA  LIKE KONDN-KNRMM,
           NACHKOMMA LIKE KONDN-KNRMM.
      L_FRM-NRMENGE = 0.
      L_FRM-NRRUND  = 0.
      L_FRM-NRMENGE = ( L_FRM-MGLME / L_FRM-KNRNM * L_FRM-KNRZM ).
    business rounding
        VORKOMMA = FLOOR( L_FRM-NRMENGE ).
      L_FRM-NRRUND  = L_FRM-NRMENGE - VORKOMMA.
      L_FRM-NRMENGE = VORKOMMA.
    3. Select routine 601 in field "Calc.Rule" when you create free goods condition record.
    Hope it helps.

  • Error in compiling Photoshop CC 2014 sample project

    Hi,
    I am trying to compile SDK sample project "outbound". but it is showing errors, as "Parse Issue: Unknown type name 'DialogPtr' " in DialogUtilities.h .
    DialogUtilities.h file is in "Adobe Photoshop CC 2014:photoshopsdk:pluginsdk:samplecode:common:includes".
    even if I add this path in project  settings it still shows the errors.
    how can I make this work?
    I am using Photoshop CC 2014 and Xcode version is 4.6.3 (4H1503)
    If you have any idea regarding project settings then please let me know.
    Thanks and regards,
    Priyanka.

    Are you using the CC 2014 release of the SDK?
    The DialogUtilities.h for mac do not work. They are the old Carbon API's. See the Dissolve example for an Objective-C UI.
    I would comment out the DialogUtilities.h include and other associated headers for Carbon UI. Some Carbon calls still work that are unrelated to UI.

  • How to log in to Service Desk to create sample message to SAP?

    Dear all,
    How to log in to Service Desk under my Solution Manager server to create sample message to SAP under Component: SV-SMG-SUP?
    Regards
    GN

    Hi GN,
    You have different options to create messages in test component SV-SMG-SUP-TST:
    1. if you are on 7.1 you can create message using CRM_UI
    2. If you are using lower vrsion then either you can create message using Workcenter or using transaction NOTIF_CREATE or using menu --> Help --> Create support message.
    Thanks
    Regards,
    Vikram

Maybe you are looking for