No SAP instances in MMC console??

Hi,
I could't able to see SAP instances under console root-? SAP R/3 Systems?
It says below error in adminators event viewer.....any ideas to revolve this...
"The SAPPRD_00 service was unable to log on as .\SAPServicePRD with the currently configured password due to the following error:
Logon failure: the specified account password has expired.
To ensure that the service is configured properly, use the Services snap-in in Microsoft Management Console (MMC).
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp."
"DCOM got error "The service did not start due to a logon failure. " attempting to start the service SAPPRD_00 with arguments "-Service" in order to run the server:
{EFC29CC0-A03C-11D0-A1F2-0000F62893CC}"
Please help me why no instances are showing up in my MMC
Thanks
Manohar
Message was edited by:
Manohar Reddy

then give a new password , also go to services and change the password for these user ..
for this go to run enter service.msc and enter
then you will get a windown , there find service SAPPRD_00 double click and go to LOg on tab , check there you can see the user which you changed the password there , if you see , change the password there to new password you just changed. also check whether any other services runnign under that user , if yes changes the password
thanks Prince

Similar Messages

Instance Status Yellow on SAP MMC Console

Dear Experts,
We are installing NW 7.0 dialog instance on Windowsx64 bit platform, Central instance is running on Aix64 bit,
NW 7.0 Java add-in has installed on Central instance,
I want to start only abap instance on new windows application server, i set rdisp/j2ee_start parameter to "0",
Now java process do not start but SAP mmc console status is yellow because of it, disp+dowk process message is J2EE status info unavaliable,
How can unistall Java instance from newly instaled application server ?
Best Regards

Hi,
Regarding the MMC display "J2EE status info unavailable", as you don't want a dual stack remove the entry icm/HTTP/j2ee_0 from the instance profile and set the parameter 'is/HTTP/default_root_hdl = abap'.
Please reboot your system (bounce OS) to see if this helps.
If this does not help please try this.
1. Stop the SAP service
2. Open a command prompt
3. Go to usr\sap\<SID>\...\exe\run
4. call 'sapstartsrv.exe -t' from the command line
5. Confirm the dialog window
6. Start the service again
Best Regards
Niraj

Stop SAP from mmc console invalid credentials

Hi everybody
I'm trying to stop the SAP System over the MMC console 5xx13
After right clicking the instance and selecting stop SAP system I type in the user credentials <sid>adm and password.
the message invalid credentials appears.
Has somebody ever tried this way?
thanks for your help
Murat

> After right clicking the instance and selecting stop SAP system I type in the user credentials <sid>adm and password.
> the message invalid credentials appears.
Is this a local system (on Windows) or is this a remote system on Unix?
Markus

MMC hangs on Windows 2008 and SAP MMC console not coming up

Hi All,
We are running SAP CRM 7. After upgrading Windows 2003 to Windows 2008 R2, SAP is coming up on our J2ee engine. We are able to login to the SAP J2ee application, but SAP MMC hangs. After the reboot, SAP MMC does come up but it hangs while starting the SAP Server Processes. We have to close the MMC from CTRL-ALT-DEL (end process). After that SAP MMC does not come up. Although, we can number number of MMC.EXE running in task manager,but
the SAP MMC window is not displayed.
We have gone through OSS note Note 1326097 - SAP MMC Snap-In crash for certain operations and installed the new version of MMC. But still the error exists. Also, we have installed the VCREDLIST patch and have installed all the DLLs mentioned in OSS SS Note 684106 - Microsoft runtime DLLs.
Also, the event viewer shows the following message
Log Name: Application
Source: Application Hang
Date: 9/9/2011 8:32:30 AM
Event ID: 1002
Task Category: (101)
Level: Error
Keywords: Classic
User: N/A
Computer: sap-xp-q01.com
Description:
The program mmc.exe version 6.1.7600.16385 stopped interacting with
Windows and was closed. To see if more information about the problem is
available, check the problem history in the Action Center control panel. Process ID: fcc
Start Time: 01cc6f03c402c248
Termination Time: 6
Application Path: C:\Windows\system32\mmc.exe
Report Id: e74f009f-daf8-11e0-afd2-000c29701b8a
Also, we have upgraded the SAP Kernel to the latest patch level and installed MMC latest patch.
Please suggest.
Thanks,
Antarpreet

Hello,
Try to re-create (re-register) the SAP Services (SAP instance services) in services.msc list. Then try to put SAP MMC up.
Or, after recreation of sap instance services, try to reconfigure the sap mmc as well -
http://help.sap.com/saphelp_nwpi71/helpdata/en/49/0eb43799b4740ee10000000a421937/content.htm
Thanks

How to append SAP instance in SAP MMC

Hi,
We had two instances running in one host.
After a reboot one system is up and running and can be seen in MMC but the other instance niether starting nor appearing in MMC.
Can any one tell me how to append the instance in MMC with the existing up & running Instance?
Regads,
Souren

Hi,
In the properties widow select the fixed tab and add the hosttname and the instance number and then press ADD.
The SAP instance may not be listed in the MMC if the sapservices fails to start due to logon failure. Please check whether the services SAP<SID>_<Instance Number> has been started and if not please check whether the password for the user .\sapservice<SID> is valid.
Regards,
Varadhu

Plus symbol is disable in SAP R3 MMC Console

Hi All,
I am unable to start SAP R/3 MMC , that is when I open SAP MMC console and click on + symbol of SAP R/3 system it is going to be disabled .So I am unable to start the SAP Management console .
I am using 4.7 IDES EE on the windows 2003 server .
Please provide me the solution ASAP.
Regards,
Bharat .

Hi,
Probably your SAP services are not running.
start->run->services.msc see if you SAP services are disabled. If they are, then start them.
Regards,
Vishnu

SAP MMC console not working.

Hi All,
While opening the management console of the SAP,
I'm encountring an error given below:
"MMC can't open the file "C:\WINDOWS\SAPMMC.MSC."
This may be because the file doesnot exist, is not an MMC console, or was created by later version of MMC. This may also be because you don't have sufficientaccess rigths to the file.
Plz help
Thanks in advance.
Edited by: Mohnish Kapoor on May 17, 2008 3:07 PM

Problem solved.

MINISAP MMC console not working

Hi,
I am pursuing my abap certfication. Inorder to get more practise I have downloaded the minisap 70206. When I start the sap mmc console I am not able to get the list of instances and the services rendered. The console appears to be inactive and unresponsive.
Please let me know as to what the problem is actually regarding.
Regards,
Deepak.M

Hello
Yes, Increase the virtual memory to 6 GB and install it again. make sure you delete every old SAP items from your system before you reinstall new one. Even you uninstall there will be some traces in registry key....
1)It is recommended to stop the Application Server before uninstallation.
Open sapinst.exe. Choose "Software Life Cycle Options" --> Uninstall --> Uninstall System.
Provide sapinst.exe with the file location of your system profile directory
Provide the credentials of system (and optional database) users.
Start uninstallation.
2) if the folded below exists, please delete the folder
C:\Program Files\Common Files\Sap Shared
3) delete all other folders where the sapgui was installed
c:\program files\sap\
4) delete then all "SAP" entries in the windows registry in
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\SharedDLLs
( Please ONLY the SAP entries )
Now you have a "clean" System.......
Regards
Anil

Cloning SAP instance on Windows

Hi - We have SAP on Windows server and our Database is on Unix. We want to make clone of this whole environment. From DB perspective it is easy - we can copy the database to another Unix Server. What do we have to do from Windows/SAP side?
Can we just copy the binaries to another Windows server or do we need to install SAP from scratch?

From Windows/SAP perspective you can do it in two ways either running the SAP Inst or the folder copy option. As per me the folder copy option is easier than running SAP Inst. The steps is as follows.
1. Copy the //server1/<Drive>/usr/sap/<SID> folder to //server2/<Drive>/usr/sap/<SID>
2. Determine the new Instance Number.
3. Rename folder //server2/<Drive>/usr/sap/<SID>/DVBMGxx....where xx is the new Instance no.
4. Go to the profile directory and change the following entries.
a. Replace all entries of the old database server with new database server.
b. Replace all entries of the old SAP binaries server with new SAP binaries server.
c. Replace all old instance number to new Instance number (if old instance no is 00 then change all parameter which are ended with old instance no. i.e. _00)
5. Rename profile files as per new instance no.
6. Run program SAPSTARTSRV.EXE to setup new SAP Services and MMC.
Let me know if you have any concern.
Thanks,
SK

Not able to start Instance in MMC

Hi,
I have installed SAP NetWeaver Composition Environment 7.1 SR5 - Developer Edition which is a trial version on a windows xp pro virtual machine. I have installed NWDS 7.1 Composition Environment SP05 successfully.
I have installed Java Platform, Enterprise Edition 5 SDK.
The problem is that the two instances in MMC appears to be grey instead of green. That is why I am not able to deploy any web dynpro application. Does any body know that what steps I need to take after installing the developer edition? What about the SDM?
Earlier http://localhost:50000/ was displaying a web dynpro exception just after completion of installation of developer edition but now I am getting page cannot be displayed error.
Please help / guide. I need this envirnoment to be set up soon for practicing web dynpro.
Regards,
Vaibhav

Hi Vaibhav,
You need to start server from MMC. Before starting please check following thing are correct or not.
- Update your server IP address and host name in host file entry at (Start > RUN > drivers > etc > host file)
- Update JAVA_HOME system enviromental variable in my computer (My computer > Priperties >> Advance >> Startup and Recovery >> Enviromental Variable >> System Variables >> Add new JAVA_HOME parameter with path for installed Java JDK)
- Check database server services (Start > Run > Services.msc > Start your database services manually and change properties as automatic)
After that please try to start your SAP Server :- open MMC >> Right Click on Server Node >> Select All Task >> Start >> Enter your Desktop userid and password. It will take 20-40 min if you are starting first time.
Please check installation Guide : [Install & Configure SAP NetWeaver Composition Environment 7.1 ehp1 |http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b057d7e3-b89e-2b10-1e9e-c426e967f8e1]
Hope it helps
Regards
Arun

Unable to find Central instance in MMC

Hi ,
We are unable to find the central instance in MMC .Please suggest why this problem comes and how we can solve it.
Environment: CRM 5.0 on MSSQL 2005, windows 2003
Urgent
Points will be rewarded at the max.
Regards
Kumar

Hi,
1) Check the shares saploc and sapmnt is available in the system.
2) IF both the shares are there in the system try to start the system from the cmd.
format : STARTSAP.EXE name=<SID> nr=<SYSNR> SAPDIAHOST=<host>
Also try to add the nodes frum the mmc.(File->Add and remove snap in.select SAP Systems>enter the required values....
3)if it is not working check the librfc32.dll and librfc32u.dll files in the c:\windows\system32.
If it is not registered ,try to register it using regsvr32
Also please check whether 2 sapservices are available in services.msc
Regards,
Arun

Problems to start SAP instance after reboot

Hello experts,
we are occuring a problem that we are not able to start our SAP instance after we applied some MS patches and rebooted the server. We also deinstalled these patches buzt this also did not help, so I guess the reason somewhere else.
We are running a SQL server 2000 on a Windows 2003 SP2 (32bit)
SAP kernel is 640 PL 304
The SQL server seems to operate normally, however when we try to start SAP via MMC the process disp+work fails (it's green for a few seconds, but then turn so grey).
In dev_w0 I can find this entry
C Mon Feb 22 12:35:18 2010
C OpenOledbConnection: line 23082. hr: 0x8000ffff [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
C sloledb.cpp [OpenOledbConnection,line 23082]: Error/Message: (err 17, sev 10), [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23082]: Error/Message: (err 0, sev 10), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
I hope you have an idea to solve the issue soon.
Thanks a lot
Philipp

Hi,
yes I read this SAP note however when I try to install this patch
It fails with message "installation unsuccessful"
Reason ??
Check the following:
1. Status of SQLServer Service(s)?
2. Windows Event Log Entries?
What is the SP level of SQL Server 2000 ?
Also, Perform the Connectivity Test as per[ this link|http://support.microsoft.com/kb/827422/].
Regards,
Bhavik G. Shroff

The SAP Instance JC00 fails to start on aIX box

Hi,
I am installing SAP Netweaver on AIX box.
The instalaltion process fails at the phase 33 of 34
the SAP Instance JC00 fails to start
if i chek the error fiel
Trace of system startup/check of SAP System DON on Tue Dec 26 16:00:51 CST 2006
Called command: /usr/sap/DON/SYS/exe/run/startsap
Starting SAP Instance JC00
SAP-R/3-Startup Program Rel 640 V1.8 (2003/04/24)
Starting at 2006/12/26 16:00:51
Startup Profile: "/usr/sap/DON/SYS/profile/START_JC00_pun-lpar-idm03"
(655470) SETENV LD_LIBRARY_PATH=/usr/sap/DON/JC00/j2ee/os_libs:
Setup Environment Variables
(655470) SETENV SHLIB_PATH=/usr/sap/DON/JC00/j2ee/os_libs:
(655470) SETENV LIBPATH=/usr/sap/DON/JC00/j2ee/os_libs:/usr/lib:/lib:/usr/sap/DON/SYS/exe/run:/oracle///instantclient
Execute Pre-Startup Commands
(655470) Local: rm -f jc.sapDON_JC00
(655470) Local: ln -s -f /usr/sap/DON/JC00/j2ee/os_libs/jcontrol jc.sapDON_JC00
Starting Programs
(651450) Starting: local jc.sapDON_JC00 pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
(655470) Waiting for Child Processes to terminate.
(655470) **** 2006/12/26 16:00:56 Child 651450 terminated with Status 255 . ****
(655470) **** No more Child Processes to wait for.
(655470) Parent Shutdown at 2006/12/26 16:00:56
Execute Post-Shutdown Commands
(655470) Exiting with Return-Code 3. (No more child processes)
Startup of Instance failed
What can be the problem here
Regards
Manoj

Hi Siddesh,
Thanks for the response
The trace is form the file dev_jcontrol located in "/usr/sap/DON/JC00/work" directory
"dev_jcontrol" 111 lines, 5297 characters
trc file: "/usr/sap/DON/JC00/work/dev_jcontrol", trc level: 1, release: "640"
node name   : jcontrol
pid         : 610394
system name : DON
system nr. : 00
started at : Tue Dec 26 19:12:38 2006
arguments   :
    arg[00] : jc.sapDON_JC00
    arg[01] : pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
JStartupReadInstanceProperties: read instance properties [/usr/sap/DON/JC00/j2ee/cluster/instance.properties:/usr/sap/DON/JC00/SDM/p
rogram/config/sdm_jstartup.properties]
-> ms host    : pun-lpar-idm03
-> ms port    : 3601
-> OS libs    : /usr/sap/DON/JC00/j2ee/os_libs
-> Admin URL :
-> run mode   : NORMAL
-> run action : NONE
-> enabled    : yes
Used property files
-> files [00] : /usr/sap/DON/JC00/j2ee/cluster/instance.properties
-> files [01] : /usr/sap/DON/JC00/SDM/program/config/sdm_jstartup.properties
Instance properties
-> ms host    : pun-lpar-idm03
-> ms port    : 3601
-> os libs    : /usr/sap/DON/JC00/j2ee/os_libs
-> admin URL :
-> run mode   : NORMAL
-> run action : NONE
-> enabled    : yes
:$
trc file: "/usr/sap/DON/JC00/work/dev_jcontrol", trc level: 1, release: "640"
node name   : jcontrol
pid         : 610394
system name : DON
system nr. : 00
started at : Tue Dec 26 19:12:38 2006
arguments   :
    arg[00] : jc.sapDON_JC00
    arg[01] : pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
JStartupReadInstanceProperties: read instance properties [/usr/sap/DON/JC00/j2ee/cluster/instance.properties:/usr/sap/DON/JC00/SDM/p
rogram/config/sdm_jstartup.properties]
-> ms host    : pun-lpar-idm03
-> ms port    : 3601
-> OS libs    : /usr/sap/DON/JC00/j2ee/os_libs
-> Admin URL :
-> run mode   : NORMAL
-> run action : NONE
-> enabled    : yes
Used property files
-> files [00] : /usr/sap/DON/JC00/j2ee/cluster/instance.properties
-> files [01] : /usr/sap/DON/JC00/SDM/program/config/sdm_jstartup.properties
Instance properties
-> ms host    : pun-lpar-idm03
-> ms port    : 3601
-> os libs    : /usr/sap/DON/JC00/j2ee/os_libs
-> admin URL :
-> run mode   : NORMAL
-> run action : NONE
-> enabled    : yes
Bootstrap nodes
-> [00] bootstrap            : /usr/sap/DON/JC00/j2ee/cluster/instance.properties
Worker nodes
-> [00] sdm                  : /usr/sap/DON/JC00/SDM/program/config/sdm_jstartup.properties
[Thr 1] Tue Dec 26 19:12:38 2006
[Thr 1] SigISetDefaultAction : default handling for signal 20
[Thr 1] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
[Thr 1] [Node: bootstrap] java home is set by profile parameter
        Java Home: /usr/java14_64
JStartupIReadSection: read node properties [bootstrap]
-> node name       : bootstrap
-> node type       : bootstrap
-> java path       : /usr/java14_64
-> java parameters : -Djco.jarm=1 -Djco.jarm=1
-> java vm version : J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142ifx-20060209 (SR4-1) (JIT enabled: jitc)
-> java vm vendor : Classic VM (IBM Corporation)
-> java vm type    : <default>
-> java vm cpu     : ppc64
-> heap size       : 128M
-> root path       : /usr/sap/DON/JC00/j2ee/cluster
-> class path      : ./bootstrap/launcher.jar
-> OS libs path    : /usr/sap/DON/JC00/j2ee/os_libs
-> main class      : com.sap.engine.offline.OfflineToolStart
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : /usr/sap/DON/JC00/j2ee/os_libs/jstartup.jar
-> parameters      : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0035316
-> debuggable      : yes
-> debug mode      : no
-> debug port      : 60000
-> shutdown timeout: 120000
JStartupStartJLaunch: program = /usr/sap/DON/JC00/j2ee/os_libs/jlaunch
-> arg[00] = /usr/sap/DON/JC00/j2ee/os_libs/jlaunch
-> arg[01] = pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
-> arg[02] = -DSAPINFO=DON_00_bootstrap
-> arg[03] = -file=/usr/sap/DON/JC00/j2ee/cluster/instance.properties
-> arg[04] = -nodeName=bootstrap
-> arg[05] = -nodeId=-1
-> arg[06] = -syncSem=9437188
-> arg[07] = -jvmOutFile=/usr/sap/DON/JC00/work/jvm_bootstrap.out
-> arg[08] = -stdOutFile=/usr/sap/DON/JC00/work/std_bootstrap.out
-> arg[09] = -locOutFile=/usr/sap/DON/JC00/work/dev_bootstrap
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
-> lib path = LIBPATH=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/DON/JC00/j2ee/os_libs:/u
sr/sap/DON/SYS/exe/run:/usr/sap/DON/SYS/exe/run:/usr/sap/DON/SYS/exe/run:/tmp/sapinst_exe.360486.1167110312:/usr/lib:/usr/sap/DON/JC
00/j2ee/os_libs:/usr/sap/DON/JC00/j2ee/os_libs:/usr/lib:/lib:/usr/sap/DON/SYS/exe/run:/oracle///instantclient
-> exe path = PATH=/usr/java14_64/bin:/usr/sap/DON/JC00/j2ee/os_libs:/oracle/DON/102_64/bin:/usr/java14_64/bin:/home/donadm:/usr/sap
/DON/SYS/exe/run:/usr/bin:/etc:/usr/sbin:/usr/ucb:/home/donadm/bin:/usr/bin/X11:/sbin:.
[Thr 1] JStartupICreateProcess: fork process (pid 274544)
[Thr 1] Tue Dec 26 19:12:55 2006
[Thr 1] *** ERROR => invalid return code of process [bootstrap] (exitcode=-1) [jstartxx_mt. 1433]
[Thr 1] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc=-1)
[Thr 1] JControlCloseProgram: started (exitcode = -1)
[Thr 1] JControlCloseProgram: good bye... (exitcode=-1)
:q
pun-lpar-idm03:donadm 68> ls -lt
total 128
-rw-rr   1 donadm   sapsys          329 Dec 26 19:12 INSTSTAT
-rw-rr   1 donadm   sapsys         1323 Dec 26 19:12 sapstart.log
-rw-rr   1 donadm   sapsys         5297 Dec 26 19:12 dev_jcontrol
-rw-rr   1 donadm   sapsys         7556 Dec 26 19:12 dev_bootstrap
-rw-rr   1 donadm   sapsys          615 Dec 26 19:12 std_bootstrap.out
-rw-rr   1 donadm   sapsys          158 Dec 26 19:12 sapstart0.trc
-rw-rr   1 donadm   sapsys          158 Dec 26 19:12 stderr0
-rw-rr   1 donadm   sapsys            0 Dec 26 19:12 stdout0
-rw-rr   1 donadm   sapsys          240 Dec 26 19:12 dev_sapstart
-rw-rr   1 donadm   sapsys            0 Dec 26 19:12 dev_tp
lrwxrwxrwx   1 donadm   sapsys           39 Dec 26 19:12 jc.sapDON_JC00 -> /usr/sap/DON/JC00/j2ee/os_libs/jcontrol
-rw-rr   1 donadm   sapsys            0 Dec 26 19:11 dev_tp.old
-rw-rr   1 donadm   sapsys         5519 Dec 26 17:32 dev_jcontrol.old
-rw-rr   1 donadm   sapsys         7568 Dec 26 17:32 dev_bootstrap.old
-rw-rr   1 donadm   sapsys         1045 Dec 26 17:32 dev_jcmon
-rw-rr   1 donadm   sapsys         1045 Dec 26 17:32 dev_jcmon.old
pun-lpar-idm03:donadm 69> vi dev_bootstrap
"dev_bootstrap" 176 lines, 7556 characters
trc file: "/usr/sap/DON/JC00/work/dev_bootstrap", trc level: 1, release: "640"
node name   : bootstrap
pid         : 274544
system name : DON
system nr. : 00
started at : Tue Dec 26 19:12:38 2006
arguments   :
    arg[00] : /usr/sap/DON/JC00/j2ee/os_libs/jlaunch
    arg[01] : pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
    arg[02] : -DSAPINFO=DON_00_bootstrap
    arg[03] : pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
JStartupReadInstanceProperties: read instance properties [/usr/sap/DON/JC00/j2ee/cluster/instance.properties]
-> ms host    : pun-lpar-idm03
-> ms port    : 3601
-> OS libs    : /usr/sap/DON/JC00/j2ee/os_libs
-> Admin URL :
-> run mode   : NORMAL
-> run action : NONE
-> enabled    : yes
Used property files
-> files [00] : /usr/sap/DON/JC00/j2ee/cluster/instance.properties
Instance properties
-> ms host    : pun-lpar-idm03
-> ms port    : 3601
-> os libs    : /usr/sap/DON/JC00/j2ee/os_libs
-> admin URL :
-> run mode   : NORMAL
-> run action : NONE
-> enabled    : yes
:$
-> debug mode      : no
-> debug port      : 60000
-> shutdown timeout: 120000
[Thr 772] JLaunchIStartFunc: Thread 772 started as Java VM thread.
JHVM_LoadJavaVM: VM Arguments of node [bootstrap]
-> stack   : 1048576 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: -Djco.jarm=1
-> arg[ 3]: -Djco.jarm=1
-> arg[ 4]: -Dsys.global.dir=/sapmnt/DON/global
-> arg[ 5]: -Dapplication.home=/usr/sap/DON/JC00/j2ee/os_libs
-> arg[ 6]: -Djava.class.path=/usr/sap/DON/JC00/j2ee/os_libs/jstartup.jar:./bootstrap/launcher.jar
-> arg[ 7]: -Djava.library.path=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/DON/JC00/j2ee
/os_libs:/usr/sap/DON/SYS/exe/run:/usr/sap/DON/SYS/exe/run:/usr/sap/DON/SYS/exe/run:/tmp/sapinst_exe.360486.1167110312:/usr/lib:/usr
/sap/DON/JC00/j2ee/os_libs:/usr/sap/DON/JC00/j2ee/os_libs:/usr/lib:/lib:/usr/sap/DON/SYS/exe/run:/oracle///instantclient
-> arg[ 8]: -Dmemory.manager=128M
-> arg[ 9]: -Xmx128M
-> arg[ 10]: -DLoadBalanceRestricted=no
-> arg[ 11]: -Djstartup.mode=BOOTSTRAP
-> arg[ 12]: -Djstartup.ownProcessId=274544
-> arg[ 13]: -Djstartup.ownHardwareId=F0052428966
-> arg[ 14]: -Djstartup.whoami=bootstrap
-> arg[ 15]: -Djstartup.debuggable=yes
-> arg[ 16]: -DSAPINFO=DON_00_bootstrap
-> arg[ 17]: -DSAPSTARTUP=1
-> arg[ 18]: -DSAPSYSTEM=00
-> arg[ 19]: -DSAPSYSTEMNAME=DON
-> arg[ 20]: -DSAPMYNAME=pun-lpar-idm03_DON_00
-> arg[ 21]: -DSAPDBHOST=
-> arg[ 22]: -Dj2ee.dbhost=pun-lpar-idm03
Signal 6 encountered.
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit      = unlimited
=> Stack limit     = unlimited
=> Core limit      = unlimited
=> File size limit = unlimited
=> Heap address = 0x0x111179f20
=> Stack address = 0x111151b00
=> Stack low     = 0x11114f200
=> Stack high    = 0xffffffffffff470
=> Stack Trace:
        pthread_kill() at 0x90000000040d2b4
        praise() at 0x90000000040ccec
        raise() at 0x900000000049c50
        abort() at 0x900000000073eb0
        GetPropertiesMD() at 0x900000004267774
        ciCreateJVM() at 0x9000000042ff824
        JNI_CreateJavaVM() at 0x90000000429329c
        JHVM_LoadJavaVM() at 0x1000918d4
        JLaunchIStartFunc() at 0x10008bb14
        pthreadbody() at 0x9000000003f92d8
!!! Invalid stack address encountered: 0x0
!!! Stack corrupted.
=> CPU Registers:
     msr = 0xa00000000000d032     iar = 0x090000000040d2b4
     ctr = 0xffffffff00418400      lr = 0xffffffffffffffff
     xer = 0x00000000ffffffff      cr = 0x0000000000000000
     r00 = 0xffffffffffffffff     r01 = 0x0000000111151b00
     r02 = 0xffffffffffffffff     r03 = 0x0000000000000000
     r04 = 0xffffffffffffffff     r05 = 0xffffffffffffffff
     r06 = 0xffffffffffffffff     r07 = 0xffffffffffffffff
     r08 = 0xffffffffffffffff     r09 = 0xffffffffffffffff
     r10 = 0xffffffffffffffff     r11 = 0xffffffffffffffff
     r12 = 0xffffffffffffffff     r13 = 0x0000000111153994
     r14 = 0x0000000000000000     r15 = 0x0000000000000000
     r16 = 0x0000000000000000     r17 = 0x0000000000000000
     r18 = 0x0000000000000000     r19 = 0x0000000000000000
     r20 = 0x0000000000000000     r21 = 0x0000000000000000
     r22 = 0x0000000000000000     r23 = 0x0000000000000000
     r24 = 0x0000000000000000     r25 = 0x0000000000000000
     r26 = 0x0000000000000000     r27 = 0x09001000a1c9ea40
     r28 = 0x0000000111153994     r29 = 0x0000000000000006
     r30 = 0x0000000000000304     r31 = 0x0000000000000006
[Thr 772] ***LOG Q0E=> SigIGenAction, signal ( 6) [sigux_mt.c   836]
:q
pun-lpar-idm03:donadm 70> /usr/sbin/lsattr -E -l sys0 -a realmem
realmem 1048576 Amount of usable physical memory in Kbytes False
pun-lpar-idm03:donadm 71>
pun-lpar-idm03:donadm 71>
pun-lpar-idm03:donadm 71> pwd
/usr/sap/DON/JC00/work
pun-lpar-idm03:donadm 72> ls
INSTSTAT           dev_jcmon          dev_jcontrol.old   dev_tp.old         sapstart0.trc      stdout0
dev_bootstrap      dev_jcmon.old      dev_sapstart       jc.sapDON_JC00     std_bootstrap.out
dev_bootstrap.old dev_jcontrol       dev_tp             sapstart.log       stderr0
pun-lpar-idm03:donadm 73> vi dev_jcontrol
"dev_jcontrol" 111 lines, 5297 characters
trc file: "/usr/sap/DON/JC00/work/dev_jcontrol", trc level: 1, release: "640"
node name   : jcontrol
pid         : 610394
system name : DON
system nr. : 00
started at : Tue Dec 26 19:12:38 2006
arguments   :
    arg[00] : jc.sapDON_JC00
    arg[01] : pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
JStartupReadInstanceProperties: read instance properties [/usr/sap/DON/JC00/j2ee/cluster/instance.properties:/usr/sap/DON/JC00/SDM/p
rogram/config/sdm_jstartup.properties]
-> ms host    : pun-lpar-idm03
-> ms port    : 3601
-> OS libs    : /usr/sap/DON/JC00/j2ee/os_libs
-> Admin URL :
-> run mode   : NORMAL
-> run action : NONE
-> enabled    : yes
Used property files
-> files [00] : /usr/sap/DON/JC00/j2ee/cluster/instance.properties
-> files [01] : /usr/sap/DON/JC00/SDM/program/config/sdm_jstartup.properties
Instance properties
-> ms host    : pun-lpar-idm03
-> ms port    : 3601
-> os libs    : /usr/sap/DON/JC00/j2ee/os_libs
-> admin URL :
-> run mode   : NORMAL
-> run action : NONE
-> enabled    : yes
:$
-> arg[04] = -nodeName=bootstrap
-> arg[05] = -nodeId=-1
-> arg[06] = -syncSem=9437188
-> arg[07] = -jvmOutFile=/usr/sap/DON/JC00/work/jvm_bootstrap.out
-> arg[08] = -stdOutFile=/usr/sap/DON/JC00/work/std_bootstrap.out
-> arg[09] = -locOutFile=/usr/sap/DON/JC00/work/dev_bootstrap
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=/usr/sap/DON/SYS/profile/DON_JC00_pun-lpar-idm03
-> lib path = LIBPATH=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/DON/JC00/j2ee/os_libs:/u
sr/sap/DON/SYS/exe/run:/usr/sap/DON/SYS/exe/run:/usr/sap/DON/SYS/exe/run:/tmp/sapinst_exe.360486.1167110312:/usr/lib:/usr/sap/DON/JC
00/j2ee/os_libs:/usr/sap/DON/JC00/j2ee/os_libs:/usr/lib:/lib:/usr/sap/DON/SYS/exe/run:/oracle///instantclient
-> exe path = PATH=/usr/java14_64/bin:/usr/sap/DON/JC00/j2ee/os_libs:/oracle/DON/102_64/bin:/usr/java14_64/bin:/home/donadm:/usr/sap
/DON/SYS/exe/run:/usr/bin:/etc:/usr/sbin:/usr/ucb:/home/donadm/bin:/usr/bin/X11:/sbin:.
[Thr 1] JStartupICreateProcess: fork process (pid 274544)
[Thr 1] Tue Dec 26 19:12:55 2006
[Thr 1] *** ERROR => invalid return code of process [bootstrap] (exitcode=-1) [jstartxx_mt. 1433]
[Thr 1] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc=-1)
[Thr 1] JControlCloseProgram: started (exitcode = -1)
[Thr 1] JControlCloseProgram: good bye... (exitcode=-1)

How to connect different clients of same SAP Instance

Hi,
I have a question abour CPS 7, Basic- / Free of Charge Version
I know that this version is restricted to have only one SAP Instance per Isolation Goup, but how about different clients of the same Instance ?
Is it necessary to create an Isolation Group for each client of the same instance ?
We actually have 1 isolation group with 1 Instance and 1client .
Trying to create a second XBP Connection to another client fails then saving the changes with error:
"JCS-102120: SAP System DI1.DI1_045 should be isolated but is not. Show error details"
I didnt find a concrete statement in the Installation - and in the Admin Guide.
Regards
Frank

Hi Frank,
This is correct, there is one client per isolation group. The free version works similar in this respect to SM36/SM37: jobs are defined in each client individually and independently.
Regards,
Anton.

Automatic Sales order creation from IDOC generated in another SAP instance?

Hi,
I have been trying to create Sales ordes in a seperate SAP instance, through the Purchase order generated in another Instance.
The Purchase order generated, passes the informtion through an IDOC to another SAP instance, I am getting the following error
" VKORG, VTWEG, SPART cannot be determined for customer 0000001000 ,Vendor000200038 "
It is Message No VG204 , Status Record 51
Please help to solve the problem.
Regards,
Chamandeep

SAP Xpert friends,
I really need help in figuring out this error I get when I send an IDoc from external system to SAP.
Here is what I do....
create empty idoc of type ORDERS01
idoc.MESTYP = "ORDERS";
idoc.SNDPRN = "1171";
idoc.SNDPRT = "KU";
idoc.MANDT = "400";
idoc.SNDPFC = "AG";
idoc.MESCOD = " ";
idoc.MESFCT = " ";
idoc.TEST = " ";
create segment of type E1EDK01
add field MENGE with a value
add segment e1edp01 to idoc
create segment of type E1EDP19
add field QUALF with a value to segment
add field IDTNR with a value to segment
add segment E1EDP19 to idoc
send idoc
When I check WE02 in SAP, I can see the idoc, but
get this error
Here are all the STATUS RECORDS
<b>50 IDoc added
64 IDoc ready to be transferred to application
62 IDoc passed to application
51 Error: Application document not posted
    <i>VKORG, VTWEG, SPART cannot be determined</i>
    for customer 0000001171 , vendor</b>
I checked on Internet and found that VOE2 can be used to setup ... this is what I have in VOE2
Customer    Vendor SOrg     DChl   Dv
1171        0000001171       1000   00
Thanks for help...

No SAP instances in MMC console??

Similar Messages

Maybe you are looking for