No SAP Systems in Database Assistant

Hi,
I am trying to connect to an SAP R/3 System out of Crystal Reports 2008.
I have installed the Integration Kit for SAP and can connect to my SAP BW systems. However I would like to directly connect to an ERP, R/3 system. But when I select "SAP InfoSet" out of the data sources I do not see any of my systems in the following list "Choose SAP system".
Is there any special configuration necessary to populate the list with my systems?
Regards
Christoph

Hi Christoph and Sourashree, i find the same problem. Are you already fix it?
I dont have a BOE server to install the transport files on a server-side, i have only crystal reports and SAP GUI instaled in some machines.
This problem occurred only in some machines, in my machine for example, it work, in another machine, it dont work.
I already check the versions of SAP Logon, Crystal Reports and Integration Kit, and is the same.
Do you have any idea?
Thanks in Advance.
Rodrigo.

Similar Messages

Resoring prodution database into new installed sap system

have installed ecc 6.0 with sql server 2008 (sp 1) on windows 2003
server with 64 bit.
My installtion was done sussfully and also i started sap system.It
was working fine. then i took backup from my standalone system .
I restored prodution server database in standalone system and restore
was done successfully.
Then iam trying to login to sap system then it was saying that
dispature was stopped.
first dispatur was in yellow and status running message server
connection ok,dialuge que time 0;00sec,j2ee status info unavailable.
Iam sending screen shots and also related error log files attatched.
Please can you get help from those documents.
I also checked r3trans -d.
C:\Documents and Settings\Administrator>r3trans -d
This is r3trans version 6.14 (release 700 - 12.06.09 - 15:20:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = MSS --- SERER = 'SHURJO' DBNAME = 'PRD'"
r3trans finished (0012).
before doing prodution database restore is compulsary to i have to increase the patch levels of my new installed system
because my prodution server abap& basis patch levels are 19 and my installed system it is only 14.
Please can any body give right way to resolve this problem,
Regards,
Krishna

> before doing prodution database restore is compulsary to i have to increase the patch levels of my new installed system
> because my prodution server abap& basis patch levels are 19 and my installed system it is only 14.
First: It's pointless to first install a full system and then try to overwrite the database with another one.
I would INSTALL the system using the database copy.
This procedure is call "homogeneous system copy" and there's a guide for that available at http://service.sap.com/instguides and also in "Note 151603 - Copying an SQL Server database".
The error message is coming because the database has not the proper users, you'd need to run the STM tool to adapt the users and the environment. Those steps are all described in detail in the guide.
Markus

Multiple SAP systems on One database

Hello,
We are planing to install multiple SAP systems like SM, ERP on one database with multiple DB SIDs, it means each SAP system has its own Oracle instance. We know MCOD has only one DB SID (one oracle instance) for multiple SAP systems.
Is it possible to set up the landscape like this? Is it supported by SAP?
Can any body advice?
Thanks,
Kris

>
Kris wrote:
> Thanks Markus,
>
> But we want to install one DBMS home for all oracle instances for different SAP components. Is it possible?
>
>
> Thanks,
> Kris
Technically, it is possible.
But SAP Does NOT support it. The only method to install one set of binaries (one ORACLE_HOME) that is supported by SAP is to use MCOD (all components are installed in one Database)

Updating Database table across multiple SAP systems

Dear All,
I am working on a requirement which is described as follows:
The requirement is to keep a database table in sync across 10 different SAP clients (for production, test systems etc.). So when the database table is modified in source SAP system, it has to be replicated across all the clients and table of other SAP systems.
So the queries from my side are:
1. Whether XI should be used here as a middleware or direct RFC calls can do the updation across the SAP systems?
2. If XI is to be used what would be the recommended approach (ABAP Proxy to ABAP Proxy communication?)
Hope you can recommend me the best options to achieve this.
Thanks & Regards,
Pratik

it depends on what tables are involved/ what type of data/what transactions cause the update.
If you know the table names - then database level replication may be an option u2013 many projects do refresh their QA system with production data for a very real test data. If not, a hard disk level mirroring may have to be considered.
There are other technologies like change pointers in conjunction with distribution model can also be considered - which could trigger idocs that can be sent to the other systems using ALE layer or ALE *** PI/XI

Database distribution for several SAP Systems

Hi gurues, we have a very important concern about SAP on Z systems, it is possible/recommended to have on on Z system only one DB engine with several databases that correspond to several SAP Systems running on the machine?
Because we have AIX platform right now and we can not have that kind of database landscape, we only can choose between MCOD or one dataabase engine with one datase in one machine (we can not share db engine).
Hope this question is clear enoguh for you.
Regards
Gustavo

Gustavo,
Sadly yes. You'll have to forgive some of my terminology. I actually work on the Basis team at my company and I am not a DBA. We happen to be running DB2 z/OS and we are using datasharing. For a sandbox ECC system we might have SID SE1 and DB2 sub-systems SE11 and SE12. For another sandbox BI system we might have SID SB1 and DB2 sub-systems SB11 and SB12. Even if datasharing is not used (and hence the 12 member would not exist, SE12 for instance), I would strongly recommend against MCOD and instead suggest using a different DB2 system for each SAP SID.
We have spoken to at least 1 customer that implemented their ECC (ABAP only) and Portal (Java only) SIDs as MCOD in the same DB2 z/OS system. Unfortunately, DB2 z/OS has some somewhat arbitrary limits for things like thread storage which MUST exist under the "2gig bar" (apparently due to some 31bit code still in use). Effectively, this limits the number of threads (and in the SAP world the number of SAP work processes) that a single DB2 member can service. I believe the limit is around 800 threads. Of course, with datasharing you can spread the load to multiple instances (SB11, SB12, SB13, SB14, etc), but then you must also plan for extra resources to be available in a planned failover for maintenance type situation. This particular customer ended up needing to fine-tune some java database threads and ended up needing an extra DB2 instance or two to handle the load during maintenance using planned failover.
Brian

RCA:Database Monitoring error for SAP Systems on OS/4000 with DB4

Hello Experts,
We are trying to add ECC systems in DATABASE monitoring(DBACOCKPIT) in RCA workcenter of solman 7.0 ehp1 sp26, the DBSID of the systems are shown as *LOCAL.hence the system is not getting added .This is the case only for system on OS/400 and DB4.
The DBSID in RCA is fetched from SMSY-Which is fetched from SLD->The data supplier in ECC pushing the data to SLD
The DBSID in System(Menu)-Status is showing as LOCAL, hence this DBSID(LOCAL) is reported in SLD->SMSY
any pointers on this?

Hi Nilesh,
Please have a look into below SAP note
1887354 *
[ODBC SQL Server Driver] Associated statement is not prepared
Hope this helps.
Regards,
Deepak Kori

Just started supporting Oracle Databases for SAP Systems

Hello Guys/Girls,
I am working as oracle dba for the past 7 years, but this is the first time, I got an opportunity to adminster databases supporting SAP systems. I am doing search on SAP Network, and gathered information on BRTOOLS, SAPGUI etc., but could not find the details what I am looking for like, database objects growth rate, sap-oracle database performance specific details, as a oracle dba what are the DOs&DONTs etc., After made a lot of search on google, I found a book from O'Reilly, but that book covers older SAP, and Oracle versions. Our Client uses oracle 9i, and 10g primarily.
I am confident as a Oracle DBA supporting non-sap systems, but not SAPsystems. Is any one of you pls., suggest me or provide me some guide lines in terms of Database Management.
Appreciate your time!

Abhi
Greate to meet another DBA in forum.The big problem we will face is SQL Tune.
Nothing much Diffnt supporting SAP.SAP PRovided some ready made tools to monitor and to solve.Reg tuning still we can follow same methoda but with approval from SAP or by ref SAP notes.Which u can find at service market place.
You can find some PDfs in sap market place and sdn.Which are ex'ly for DBas.
Reg Growth rate you can have a look on sap transactions and there are some notes also.I dont think there is specific Book or Doc which will say Dos and donts.
Performance we used to follow same methoda as a Dbas with ref of sap notes and support for any side effects.
let me know if are in need of any specific info
Regards
Vinod

TADM70: SAP System: Operating System and Database Migration

Dear Colleagues,
SAP is offering a rare opportunity to participate in "TADM70: SAP System: Operating System and Database Migration" in North America.
For details please see
<a href="https://service.education.sap.com/sap(bD1lbiZjPTAwMSZkPW1pbg==)/bc/bsp/sap/hcm_learning/trainingtype.htm?sap-params=b3R5cGU9RCZvYmppZD03MDAxNjA1MA%3d%3d">TADM70</a>
Usually this class is held only at overseas locations. SAP is willing to arrange it in North America. However we need to gather enough participants for this event to occur.
If you are interested and eligible to participate you could prebook this class at SAP Education Portal <a href="https://service.education.sap.com/sap(bD1lbiZjPTAwMSZkPW1pbg==)/bc/bsp/sap/hcm_learning/prebookings.htm">TADM70 Prebooking</a> and you could also contact Annie Normand [email protected] or myself.
Best regards,
Alexander Perelygin
SAP NetWeaver Team Lead
Terasen Gas Inc
E-mail: [email protected]
Phone: 604-592-7519

Dear Collegues,
TADM70 : SAP System: Operating System a Classroom Training
will be held
09-Jun-2008 - 11-Jun-2008
at SAP Toronto Training location.
TADM70: SAP System: Operating System and Database Migration
Schedule
Day Date From To
Monday 09.06.2008 09:00 17:00
Tuesday 10.06.2008 09:00 17:00
Wednesday 11.06.2008 09:00 17:00
Availability
Location Language Price Free Places Start Date
SAP Toronto English 2325.00 CAD Yes 09.06.2008 Add to Shopping Cart
Taxes are not included in the price.
Contact Information
Address: SAP Toronto Bloor
1600-2 Bloor St. East
M4W 1A8 - Toronto Phone: 416-929-9746 Fax: 416-927-2160
Those who interested please book it at SAP Education web site or by phone.
Alexander Perelygin

SAP's own database system ?

why not sap creates its own database system other then using the Microsoft ,Oracle and IBM's database's , which can reduce the sap installation cost for customers

Hello Siddesh,
have you ever heard of MaxDB? It was formerly called SAPDB. Support for MaxDB is not for free, but cheaper than the other RDBMS. The feature set is limited, but you get (almost) all you need for SAP systems.
SAP MaxDB
Regards,
Mark

500 Internal Server Error for ArchiveLink Repository type SAP System Database

Hi, All!
I made all settings by SAP Note 595563 "Database storage for ArchiveLink" and set new repository for document type HRICOLFOTO (in view TOAOM_C).
When I try upload photo by tr.OAOH or open repository in tr.CSADMIN I get error "500 Internal Server Error".
When I see to the 3rd level ICM-log (tr.SMICM) I see full html response (in attached file).
Is there any idea?
Best regards,
Valeriy.

Hi Valeriy,
Could you perform these steps and check the result
Start transaction SICF.
Go to "External aliases".
Select "default_host".
Select Create.
External alias: /sap/bc/contentserver
Description: HTTP Content Server interface
Fill anonymous logon data.
Select the target element /default_host/sap/bc/contentserver.
Save your entries.
Hope this helps.
Regards,
Deepak Kori

SAP won't start after recabeling sap system

Hi, 
 
I have recently recabled my sap system (from wireless to wired) and now my sap instance won't start anymore. The weird thing is that nothing major was changed. When i read the logs from the work directory it seems it cannot load dbsdbslib.dll. I have updated to the latest version of the kernel and maxdb (kernel=7.00 patch 221, maxdb=7.6.06.07) and i made very sure i got the right kernel (NT AMD64). I also checked the environment settings for the <sid>adm user. The weird part is that it seems SAP cannot connect to the database, but the databse starts just fine and r3trans -d also returns no errors. Does anyone have an idea what could be wrong? 
 
Kind regards, 
Bas 
 
 
trc file: "dev_disp", trc level: 2, release: "700" 
 
 
command line arg 0: D:\usr\sap\IDE\DVEBMGS00\exe\disp+work.EXE 
command line arg 1: pf=D:\usr\sap\IDE\SYS\profile\IDE_DVEBMGS00_sap 
 
ERROR => DlLoadLib()==DLENOACCESS - LoadLibrary("D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll") 
Error 126 = "The specified module could not be found." [dlnt.c 255] 
sysno 00 
sid IDE 
systemid 562 (PC with Windows NT) 
relno 7000 
patchlevel 0 
patchno 221 
intno 20050900 
make: multithreaded, Unicode, 64 bit, optimized 
pid 3252 
 
kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC) 
length of sys_adm_ext is 576 bytes 
SWITCH TRC-HIDE on *** 
***LOG Q00=> DpSapEnvInit, DPStart (00 3252) [dpxxdisp.c 1287] 
ShmProtect( 5, 3 ) 
SigIInit: ok (whoami=1) 
Thread handle for mainthread created 
SigIRegisterRoutine: handler for signal 11 installed (SigISegv) 
Pipe created:
.\pipe\SAP3252 
SigIInit: Create Message Thread 
SigIRegisterExitRoutine: exithandler installed (DpHalt) 
SigIRegisterTerminateRoutine: terminatehandler installed (DpHalt) 
 shared lib "dw_xml.dll" version 221 successfully loaded 
 shared lib "dw_xtc.dll" version 221 successfully loaded 
 shared lib "dw_stl.dll" version 221 successfully loaded 
 shared lib "dw_gui.dll" version 221 successfully loaded 
 shared lib "dw_mdm.dll" version 221 successfully loaded 
dp_loc_queue_max_blk: 40000 
mshost: >sap< 
DpSetCancelStrat: set timeout 0 at level 0 
DpSetCancelStrat: set timeout 5 at level 1 
DpSetCancelStrat: set timeout -1 at level 2 
DpSetCancelStrat: set timeout -1 at level 3 
rdisp/softcancel_sequence : -> 0,5,-1 
softcancel_sequence: >0,5,-1< 
use internal message server connection to port 3900 
msserv: >3900< 
dp_bufreftime: 120 sec 
dp_btctime: 60 sec 
dp_autoabaptime: 300 sec 
dp_autothtime: 60 sec 
dp_autojavatime: 300 sec 
dp_vm_alarm_time: 100 msec 
dp_calldelayed_time: 60 sec 
dp_startup_time: 20 
dp_noptime: 0 sec 
dp_keepalive: 1200 sec 
dp_keepalive_timeout: 60 sec 
dp_ms_keepalive: 60 sec 
dp_ms_keepalive_timeout: 300 sec 
switch off dp-keep-alive for old temus 
dp_gui_auto_logout: 0 sec 
dp_spoolalrm: 60 sec 
dp_softcancel_timeout: 5 sec 
rdisp/wp_restart_interval : 300 sec 
DpISetTrcLog: trc logging active, max size = 20971520 bytes 
dp_rfc_check_active: 1 
dp_rfc_check_all_rfcs: 0 
dp_http_check: 1 
check_master_slave: 0 
NiHsLGetServNo: got service name 'sapdp00' from operating system 
NiIGetServNo: servicename 'sapdp00' = port 0C.80/3200 
NiHsLGetServNo: got service name 'sapgw00' from operating system 
NiIGetServNo: servicename 'sapgw00' = port 0C.E4/3300 
NiIMyHostName: hostname = 'sap' 
NiHsLGetNodeAddr: got hostname 'sap' from operating system 
NiIGetNodeAddr: hostname 'sap' = addr 192.168.2.250 
NiHsLGetHostName: found address 192.168.2.250 in cache 
NiIGetHostName: addr 192.168.2.250 = hostname 'sap' (fq) 
Mon Oct 26 16:14:29 2009 
NiHsLGetNodeAddr: hostname 'www.doesnotexist0190.qqq.nxst' not found by operating system 
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0190.qqq.nxst) took 12 seconds 
Mon Oct 26 16:14:45 2009 
NiHsLGetHostName: address 1.0.0.1 not found by operating system 
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 16 seconds 
NiHsLGetServNo: got service name 'http' from operating system 
NiIGetServNo: servicename 'http' = port 00.50/0080 
NiHsLGetServName: port 1F.90/8080 not found by operating system 
NiHsLGetServName: port FC.2B/64555 not found by operating system 
NiHsLGetServNo: service name 'sapdp9988' not found by operating system 
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5521] 
SigIRegisterRoutine: handler for signal 16 installed (DpTrcOnOff) 
SigIRegisterRoutine: handler for signal 17 installed (DpTrcOnOff) 
SigIRegisterRoutine: alarm handler installed (DpSigAlrm) 
SigIRegisterRoutine: handler for signal 2 installed (DpSigInt) 
SigIRegisterRoutine: handler for signal 15 installed (DpSigInt) 
SigIRegisterRoutine: handler for signal 3 installed (DpSigQuit) 
MtxInit: 30000 0 0 
DpInitMtx: MtxInit o.k. 
PPID environment not found 
Thread handle for mainthread created 
SigIRegisterRoutine: handler for signal 19 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 18 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 24 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 0 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 21 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 22 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 23 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 25 installed (DpSigPrivDisp) 
 
 
trc file: "dev_w0", trc level: 2, release: "700" 
 
* 
ACTIVE TRACE LEVEL 2
ACTIVE TRACE COMPONENTS all, MJ
M
M command line arg 0: D:\usr\sap\IDE\DVEBMGS00\exe\disp+work.EXE
M command line arg 1: pf=D:\usr\sap\IDE\SYS\profile\IDE_DVEBMGS00_sap
M command line arg 2: wp_id=0
M
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll' ...
M *** ERROR => DlLoadLib()==DLENOACCESS - LoadLibrary("D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll")
Error 126 = "The specified module could not be found." [dlnt.c 255]
B *** ERROR => Couldn't load library 'D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll'
[dbcon.c 4905]
M sysno 00
M sid IDE
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 221
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 4000
M
M kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4000) [dpxxdisp.c 1349]
M Mon Oct 26 16:14:47 2009
M SigIInit: ok (whoami=2)
M Thread handle for mainthread created
M SigIRegisterRoutine: handler for signal 11 installed (SigISegv)
M Pipe created:
.\pipe\SAP4000
M SigIInit: Create Message Thread
M SigIRegisterExitRoutine: exithandler installed (wp_halt)
M SigIRegisterTerminateRoutine: terminatehandler installed (wp_halt)
M SigIRegisterRoutine: handler for signal 16 installed (DpTrcOnOff)
M SigIRegisterRoutine: handler for signal 17 installed (DpTrcOnOff)
M SigIRegisterRoutine: alarm handler installed (DpSigAlrm)
M SigIRegisterRoutine: handler for signal 2 installed (DpSigInt)
M SigIRegisterRoutine: handler for signal 15 installed (DpSigInt)
M SigIRegisterRoutine: handler for signal 3 installed (DpSigQuit)
I MtxInit: 30000 0 0
M DpInitMtx: MtxInit o.k.
M WaitParent Thread 3252 start
M WaitParent Thread 3252 created
M Thread handle for mainthread created
M SigIRegisterRoutine: handler for signal 19 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 18 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 24 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 0 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 21 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 22 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 23 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 25 installed (DpSigPrivDisp)
 
 
trc file: "trans.log" 
 
 
4 ETW000 r3trans version 6.14 (release 700 - 12.06.09 - 15:20:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 21.10.2009 - 15:06:04
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Wed Oct 21 15:06:06 2009 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dbsdbslib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] DlLoadLib success: LoadLibrary("dbsdbslib.dll"), hdl 0, addr 0000000188C00000
4 ETW000 7580 0.007580
4 ETW000 [dev trc ,00000] using "D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll" 16 0.007596
4 ETW000 [dev trc ,00000] Library 'dbsdbslib.dll' loaded 19 0.007615
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dbsdbslib.dll 38 0.007653
4 ETW000 [dev trc ,00000] Version of 'dbsdbslib.dll' is "700.08", patchlevel (0.211) 307 0.007960
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dbsdbslib.dll 26 0.007986
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dbsdbslib.dll 24 0.008010
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 46 0.008056
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=39,arg_p=0000000000000000) 21 0.008077
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 15 0.008092
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=0000000003B4F920) 20 0.008112
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 15 0.008127
4 ETW000 [dev trc ,00000] New connection 0 created 17 0.008144
4 ETW000 [dev trc ,00000] 000: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 50 0.008194
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=0000000001A01768) 31 0.008225
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 17 0.008242
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 13 0.008255
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse: 16 0.008271
4 ETW000 [dev trc ,00000] 000: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO

Edited by: B. v. d. Lienden on Oct 26, 2009 5:18 PM

<div class=Section1>
Natalia,
 
To answer your questions:
1. Did you create the SAP ticket, where this problem is
reported?
I didn't report it to SAP because it is just an IDES test
system. I can easily do a reinstall, but i would like to know the cause and
solution to this problem.
 
2. Do you have dbsdbslib.dll at this location? What version?
Yes, i have the dbsdbslib.dll at location
D:\usr\sap\IDE\DVEBMGS00\exe and also D:\usr\sap\IDE\SYS\exe\uc\NTAMD64
Version is 7000.221.16.41497 (kernel 7.00 SP 221)
 
your requested output:
 
----

disp+work information
----

 
kernel releaseu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700
 
kernel make variantu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700_REL
 
compiled onu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 NT 5.2 3790 Service Pack 2 x86
MS VC++ 14.00
 
compiled foru00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 64 BIT
 
compilation modeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 UNICODE
 
compile timeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 Aug 23 2009 23:15:57
 
update level u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A00
 
patch numberu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 221
 
source idu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 0.221
 
 
----

supported environment
----

 
database (SAP, table SVERS)u00A0u00A0 700
u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\ideadm\Application Data
CLIENTNAME=BSF02
ClusterLog=C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
COMPUTERNAME=SAP
ComSpec=C:\WINDOWS\system32\cmd.exe
DBMS_TYPE=ada
DIR_LIBRARY=D:\usr\sap\IDE\SYS\exe\uc\NTAMD64
DIR_PROFILE=D:\usr\sap\IDE\SYS\profile
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\ideadm
JAVA_HOME=C:\j2sdk1.4.2_21-x64
LOGONSERVER=
SAP
NUMBER_OF_PROCESSORS=2
OS=Windows_NT
Path=D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\j2sdk1.4.2_21-x64\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program
Files\Intel\DMIX;D:\usr\sap\IDE\SYS\exe\uc\NTAMD64
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=EM64T Family 6 Model 15 Stepping 13,
GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0f0d
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
PROMPT=$P$G
SAPEXE=D:\usr\sap\IDE\SYS\exe\uc\NTAMD64
SAPLOCALHOST=sap
SAPSYSTEMNAME=IDE
SESSIONNAME=RDP-Tcp#47
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\WINDOWS\TEMP\2
TMP=C:\WINDOWS\TEMP\2
USERDOMAIN=SAP
USERNAME=ideadm
USERPROFILE=C:\Documents and Settings\ideadm
windir=C:\WINDOWS
 
----

disp+work information
----

 
kernel releaseu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700
 
kernel make variantu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700_REL
 
compiled onu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 NT 5.2 3790 Service Pack 2 x86
MS VC++ 14.00
 
compiled foru00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 64 BIT
 
compilation modeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 UNICODE
 
compile timeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 Aug 23 2009 23:15:57
 
update levelu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 0
 
patch numberu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 221
 
source idu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 0.221
 
 
----

supported environment
----

 
database (SAP, table SVERS)u00A0u00A0 700
u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
 
 
</div>

SAP system doesn't automatically start after restart (but manual start ok)

Hi,
We've got a new production line of SAP EP 7.0 systems, which have CI on HP-UX and DIs on windows. The version is NW2004s SPS09.
What we see is that after a restart of the windows servers (usually because of windows patching), the SAP system doesn't automatically start up. It doesn't start up if I restart the SAP<SID>_<instance> service either.
However, I've got no problem starting the system with the MMC.
Any idea what I am missing here? is it as simple as a profile parameter ?
As far as I can see the profile used seem ok.
After a restart of the windows server the following files have log entries in the c:\usr\sap\<SID>\J<instance>\work folder
sapstartsrv.log
trc file: "sapstartsrv.log", trc level: 0, release: "700"
Fri Nov 17 15:51:26 2006
<<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_LIB_NOT_FOUND
sapstart.log
Starting WebService thread
SapSSLInit failed => https support disabled
Webservice named pipe thread started, listening on port
.\pipe\sapcontrol_97
Webservice thread started, listening on port 59713
sapstart.trc
Starting WebService thread
SapSSLInit failed => https support disabled
Webservice named pipe thread started, listening on port
.\pipe\sapcontrol_97
Webservice thread started, listening on port 59713
The windows event log have the application events
(first)SAP Service SAP<SID>_<instance> successfully started.
(at the same time)
Failed to update service environment from user (STATOIL-NET\<sid>adm) environment. [ntservmgr.cpp 201]
(note that this doesn't happen for all systems which have this problem, for other there is no entry like this)
I see no failed login attemps in the security event log, but see the that a login is performed for SAPService<SID>.
Since it also fails to automatically startup when I restart the service, I am able to use filemon to see what happens at a file level. Here I see that it can access the shared file system without any problems, and can read the profile and everything.
MOM is running on the server and gets some Access denied errors since it doesn't have access to the shared file system, but I don't think that matters.
Cheers
Dagfinn

hi we are using sap bw 3.5 . database is oracle 9i
i applied a kernel patch and when i tried to start the services . there was no problem with the oracle services and saposcol but the service sap<sid>_nr did not start .
when i went to check the error in work folder ..
it say " SapSSLinit failed => https support disabled .
then i tried to start sap from cmd pmt . din`t work .
is there a way to statrt this ...
thanks alot.
arjun

Error when try to start the sap system in SAPMMC

Hello gurus,
I´m faccing with a serious problem, I´m trying to figure out a solution for this but I don´t get it!! My God..
Database - MS SQL 2005
System- ECC 6.0
OS- Win 2003 Server X64
When I tried to start the system by SAPMMC the system keep in with yellow semaphoro.
I checked some log file such as:
dev_disp:
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Sat May 01 04:31:21 2010
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12996]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 328 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 328 (pos=2)
SiSelNRemove: removed sock 328
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/17
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpSemRq: key: 2, units: 1, timeout: -1
DpSemRel: key: 2, units: 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 328
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3108) [dpxxdisp.c 11183]
Good Bye .....
(With continuation...)

Hi again Gagan,
More information about that R3trans -d:
TRANS.log File:
4 ETW000 R3trans version 6.14 (release 700 - 03.11.09 - 14:15:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 01.05.2010 - 17:03:33
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Sat May 01 17:03:36 2010 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dbmssslib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] DlLoadLib success: LoadLibrary("dbmssslib.dll"), hdl 0, addr 00000001872B0000
4 ETW000 21568 0.021568
4 ETW000 [dev trc ,00000] using "E:\usr\sap\DEV\SYS\exe\nuc\NTAMD64\dbmssslib.dll" 14 0.021582
4 ETW000 [dev trc ,00000] Library 'dbmssslib.dll' loaded 16 0.021598
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dbmssslib.dll 15 0.021613
4 ETW000 [dev trc ,00000] Version of 'dbmssslib.dll' is "700.08", patchlevel (0.236) 1248 0.022861
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dbmssslib.dll 20 0.022881
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dbmssslib.dll 12 0.022893
4 ETW000 [dev trc ,00000] New connection 0 created 98 0.022991
4 ETW000 [dev trc ,00000] 000: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 64 0.023055
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 49 0.023104
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse: 15 0.023119
4 ETW000 [dev trc ,00000] 000: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 32 0.023151
4 ETW000 [dev trc ,00000] Thread ID:2484 1126 0.024277
4 ETW000 [dev trc ,00000] Thank You for using the SLODBC-interface 17 0.024294
4 ETW000 [dev trc ,00000] Using dynamic link library 'E:\usr\sap\DEV\SYS\exe\nuc\NTAMD64\dbmssslib.dll'
4 ETW000 39 0.024333
4 ETW000 [dev trc ,00000] dbmssslib.dll patch info 32 0.024365
4 ETW000 [dev trc ,00000] SAP patchlevel 0 12 0.024377
4 ETW000 [dev trc ,00000] SAP patchno 236 11 0.024388
4 ETW000 [dev trc ,00000] Last MSSQL DBSL patchlevel 0 13 0.024401
4 ETW000 [dev trc ,00000] Last MSSQL DBSL patchno 236 12 0.024413
4 ETW000 [dev trc ,00000] Last MSSQL DBSL patchcomment $DBCC() displays binary data as hex. string without 0x (1416409)
4 ETW000 21 0.024434
4 ETW000 [dev trc ,00000] lpc:(local) connection used on PTRESAPDEV 344 0.024778
4 ETW000 [dev trc ,00000] lpc:(local) connection used on PTRESAPDEV 102948 0.127726
4 ETW000 [dev trc ,00000] lpc:(local) connection used on PTRESAPDEV 12491 0.140217
4 ETW000 [dev trc ,00000] Driver: sqlncli10.dll Driver release: 10.00.2531 13539 0.153756
4 ETW000 [dev trc ,00000] GetDbRelease: 9.00.4035 1238 0.154994
4 ETW000 [dev trc ,00000] GetDbRelease: Got DB release numbers (9,0,4035) 59 0.155053
4 ETW000 [dev trc ,00000] The 7.00 (or earlier) ODBC based DBSL library should not be used for SAP systems running on SQL Server 2005 (release 9.0) or earlier.
4 ETW000 25 0.155078
4 ETW000 [dev trc ,00000] Please uninstall SQLNCLI 10 (SNAC10) on this application server.or set environment variable MSSQL_FORCEOLEDB.
4 ETW000 61 0.155139
4 ETW000 [dev trc ,00000] For more information please refer to SAP note 1082356 17 0.155156
4 ETW000 [dblink ,00433] ***LOG BY2=>sql error 0 performing CON [dblink#8 @ 433] 224 0.155380
4 ETW000 [dblink ,00433] ***LOG BY0=><message text not available> [dblink#8 @ 433] 19 0.155399
2EETW169 no connect possible: "DBMS = MSSQL --- SERVER = 'PTRESAPDEV' DBNAME = 'DEV'"

Backup message error -SAP system is running or SAP user is connected to dat

Hello ..
when the backup started i got this message error ..before starting the backup, the shell shutdown the sap system but below message was showed
BR0262I Enter database user name[/password]:
BR0055I Start of database backup: bedvugxg.aff 2010-08-08 05.31.48
BR0484I BRBACKUP log file: /oracle/AAA/sapbackup/bedvugxg.aff
BR0477I Oracle pfile /oracle/AAA/102_64/dbs/initAAA.ora created from spfile /oracle/AAA/102_64/dbs/spfileAAA.ora
BR0068E SAP system is running or SAP user is connected to database AAA - database cannot be shut down
BR1025I Please shut down SAP system first or use the 'offline_force' option
BR0056I End of database backup: bedvugxg.aff 2010-08-08 05.31.48
BR0280I BRBACKUP time stamp: 2010-08-08 05.31.49
BR0054I BRBACKUP terminated with errors
[Major] From: "OMNISAP" Time: 08/08/10 05:31:49
BRBACKUP /usr/sap/AAA/SYS/exe/run/brbackup -t offline -d util_file -c -m all -u hpbkup/******* returned 3
i am new on this, what should i review into the db?
Regards and thanks in advance
Dma.

Hello Daniela,
you try to perform an offline backup (which is a very uncommon way nowadays) and your SAP system is not down.
This is also described in the official documentation:
http://help.sap.com/saphelp_sm32/helpdata/en/0d/d309664a0c11d182b80000e829fbfe/content.htm
offline: Database backup in offline mode, in other words, the database is shut down during backup. When you select this parameter, BRBACKUP checks that no SAP system users are connected to the database. If an SAP System is active, the database is not shut down and BRBACKUP terminates the process with an error message (message number BR0068E).
Regards
Stefan

How to consume a web service provided by third party system from SAP system

Hi Friends,
Could any of you provide me a clear picture on how to consume a web service from SAP system and is provided by a third party system?
Do we get an URL to create a client proxy for consuming the web service?
Thanx in advance,
Ram

Hi Ram,
of course you cannot supply the WSDL URL. Inside the WSDL (just view it in your browser) you find (usually but not necessary) towards the end something like
<soap:address location="http://www.weather.gov/forecasts/xml/SOAP_server/ndfdXMLserver.php"/>
which is the actual adress of the service.
An example service can be found here:
<a href="http://www.weather.gov/xml/">National Digital Forecast Database</a>
containing the WSDL URL at
<a href="http://www.weather.gov/forecasts/xml/DWMLgen/wsdl/ndfdXML.wsdl">this address</a>.
You might also want to browse for the amazon webservices which allow you to embed queries against amazon into your application.
have fun,
anton

No SAP Systems in Database Assistant

Similar Messages

Maybe you are looking for