No SAPscript message exists

Hello ,
Could anyone let me know what are the reasons for the below error message .
Message no. TD000 : No SAPscript message exists
The error occurs in the transaction ME9F when i try to display the message.
Please note that the condition records are properly maintained and the Form exists in the table TNAPR.
Regards
Ramesh Ch

Hello,
I have the same message when I test a Sapscript form (transaction se71). The probleme doesn't exist when I test the form in language english.
How can I solve this problem (correct the text in logon language) ?
Colud you explain the operations to do.
Thanks in advance,
Daniel.

Similar Messages

Always getting "No SAPscript message exists" when printing

Hi,
our basis guy has added a new device type with a special driver for country specific characters.
Since that, I'm always getting the error "No SAPscript message exists", when I want to print something.
Also, when I just want to print for example a table structure in SE11. Is there something wrong with the
driver, or is it maybe just a wrong setting in the system?
Thank you!

Just use a different output device (SU3 has your user defaults) or ask your Basis admin to correct this.
It might have something to do with the settings in the device type in SPAD. On the Attributes tab, there is an option for SAPscript handling and also an option for ABAP List handling (SE11 printout would be treated as ABAP list). For example, device type UCPLAIN has "Do not use printer for ABAP list print".
In any case, I'm guessing the problem is most likely somewhere in the printer administration.

Error - No SAPscript message exists

Hi,
I am try to print a sales document into form, Gettin the following fatal error - No SAPscript message exists.
TD 000: No SAPscript message exists
Any one came across this error.
Cheers
Senthil

Hi,
R u using The Print_TEXT FM?
Then Go through the following link.
[http://help.sap.com/saphelp_nw04/helpdata/en/d6/0dba00494511d182b70000e829fbfe/frameset.htm]
If not then try to debug the SAPScript and Check in which Fm u r getting the error.
Regards
Sandipan

Application Document Not posted: No T100 message exists (ECC5.0)

Hi,
In the Inbound idoc processing, the customers are getting created without any problem, but the status of idoc is still being shown as "Application Document Not posted". It doesnt have any error message. The T100 Text in WE05 shows: No T100 message exists. When I processed this using BD73 in ECC5.0, in the foreground only one informative message displayed: "Special character for emptly field is /". Otherwise this got posted successfully. Can anybody suggest what could be the reason for the status not being shown as 53.
Regards,
Hari

This is probably not directly pertinent, but...
I am a (non-SAP) developer who hit this when developing an integration that sent IDocs inbound to SAP. we02 showed this mysterious error.
Using bd73 to process the IDoc in the foreground did not shed any light -- it just said "error during input of document" (or something like that)
The error was fixed by our BASIS admin - he said a job to cleanup log files had not been running. After he ran it, the same IDocs that generated this error processed fine when I resent them

No Messages exist

I am loading FI data to Dso 0FIAR_O03 From data source 0FI_AR_4.
data was loaded to psa succesfully.
when i created DTP and executed, the status of all messages under details tab were in green.
But when i check the content in target i dint find any data except header and in task bar i got msg as " No messages Exists" in green.
I dint find the relavent solution. can u please guide me.
Regards,
Eswari

Error at Activation of data under "SID generation" node is happened particularly in Data Package 22 and 37.

No Messages Exist - In InfoCube

Hi,
I have loaded flat file data in to the InfoCube and When I check the infocube content I'm unable to see any records in that.
And I'm getting a message as 'No Messages Exist'
Please tell me what could be the errors.
Thanks

Hi Ahmed,
do you see records at PSA, at Cube right click -> manage -> check how many transfered and added records and check the load status.
if added records are there, you can see the data with contents tab and select fields for output......
Best Regards.
Edited by: Daya Sagar on Aug 31, 2009 7:32 AM

Further error messages exist for this transaction

Hello all ,
i am getting en error message "Further error messages exist for this transaction" while creating an opportunity from external number ranges
please help me out how to solve this.
Regards
Ahmad

Hi Mohammad,
There might be any error transaction so there suppose to be an error insystem status. If you are able to generate opportunity number after saving than please do check in GUI with transaction crmd_order and check the message detail and revert.message detail is needed in order to proceed further.
Thanks,
Prem

Split mapping created.. No message exists

I see the above error message in Moni with a red flag
Actually, I dont think it really is an error message
becuase I have mapped in such a way that It shouldnt create any messages, if the condition fails.
Mapping:
If del_indicator exists ---> generate delete mapping
if del_indicator not exists ---> generate import mapping
this is the logic I did in Multi mapping.
so obviously delete will not generate if there s no deletion indicator.
the exact error message I see is "Split mapping created no messages"
there are no issues with output. its perfect.
but I still am able to see that error message in MONI
1. how do I control this? and remove the error message from moni?
2. why is it generating a error message?
Regards,
Nikhil.

If yes...so I have a solution for you !
But you will declare TWO Business Services for one receiver system:
.. Receiver_1
.. Receiver_2
you have to do some concessions as you do not want to use a BPM
In your Receiver Determination of ID, just write a condition based on your field "del_indicator".
in order to have something like that:
1. Sender --> Condition "del_indicator = Yes" --> Receiver_1
2. Sender --> Condition "del_indicator = No" --> Receiver_2
and then in the Interface Determination, you have:
1. Sender --> Mapping_for_delete_flow         --> Receiver_1
2. Sender --> Mapping_for_NON_delete_flow     --> Receiver_2
That means also that in your IR, you have TWO Interface Mappings:
1. Mapping_for_delete_flow     : Source --> Target_for_delete     (occurance 1 -> 1)
2. Mapping_for_NON_delete_flow : Source --> Target_for_NON_delete (occurance 1 -> 1)
Hope this help you.
Mickael

Unsent messages exist in Library Mail Outbox but not when I open Mail

I'm trying to retrieve 200 messages that appear to exist in my Outbox on the desktop (in Library>Mail etc.) but that do not appear when I open Mail. This happened because I force-quit Mail when it choked on 200 messages I dumbly tried to send all at once. Since Mail wouldn't run with them in the Outbox, I quit it and went to the desktop and moved them from Outgoing to other folders, such as Drafts and then another mailbox I created. In each case these messages remain invisible when I reopen Mail, but they appear to exist in the desktop Mail folders as .emlx files. Can anyone help me regain access to them in Mail? Thanks!

Thanks! It turned out that rebuilding the mailbox did it.

Pages error messages: Existing docs can't be opened

I'm getting error messages in Pages when I try to save or share an existing document: "document can't be opened"
I closed pages to try again and altho the docs appear in "open recent" (as untitled Doc. 3 and 4), I can't open them...getting same error message!
(PS documents were not locked)

BubbleBug,
You may have suffered some kind of corruption; that may also have caused the issue in your other thread.
It may be worth trying the list (you may skip 5), and you may consider going straight to 6)).
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Error in t-code MB90: No messages exists for repeat processing exist...

Hello experts,
I am currently trying out transaction code mb90 and entering the necessary information. When I click on the execute button the error above(the subject line) appears below. I am trying to debug my sapscript form through this t-code but I cannot proceed because of the said error. Thanks a lot guys!

Hi viray,
You can use MIGO transaction to create messages.
See http://projectmanagement.ittoolbox.com/groups/technical-functional/sap-r3-log-mm/736652
http://www.dgs.state.pa.us/surp_prop/lib/surp_prop/warehouse/9._sap_procedures.doc
Regards,
Wenceslaus.

BPM - check message existance

I have a bpm build to receive two messages(2 files) and merge them. I have a deadline branch setup to raise an exception after 3 minutes.
Now, I need to verify after 3 minutes whether I have both messages or not. If I don't have one of the messages, I need to terminate the process. How do I check whether I have both messages or not.
Thanks for your help..RP

you should create block and use coorelation if the message step expected did not come with in the timeframe defined then the control will go to deadline step of block and performs the operation defined there.
So checking the message is the job of the BP engine at runtime if message didnt receive within timeframe defined then deadline branch will be executed you dont need to chk the message existence in deadline step
I hope this clears you
Rajesh

Thunderbird indiscriminately deletes messages in any of the folders in which messages exist.

I have no problem deleting messages but find that messages I have not deleted disappear.

If you select a mailbox, you should get an Edit button (easier to see in landscape mode). Clicking the button will provide you with check circles for the messages. You also get Delete and Move buttons at the bottom. Check the messages you want to move and then navigate to the mailbox you want to drop them into. I think as long as you can navigate to a mailbox you can move the messages to it.
In the Mac Mail application and probably Outlook on the Windows side, you also setup rules to move messages to specific mailboxes. If the mailboxes are stored on the server, then you can have the sorting done on the server and they should appear that way on the iPad. If your later messages do not show up, you may need to have the iPad app pulled down more messages until they are all showing.

SAP Script - get a message "update was terminated for author......."

Hi,
I am try to print a purchase order(me22n) into form(script form), Gettin the following fatal error - No SAPscript message exists. and one message in pop-up window is coming up like : "Update was terminated for user...."
TD 000: No SAPscript message exists
Any one came across this error.
Pls treat it as urgent. i will reward for every helpful responses.
Cheers
Bobby

Hi,
Thank u for quick response.
but already have maintained driver program and forroutine in TCODE - NACE in Quality system.
Thx in Adv.
Bobby

Change information message to error in PS when PO created against material

In CJ20N I am changing a material that has a PO already created and all I am getting is an information message. I want this to be an error. Where would I configure this?

Hi Karen
I am not sure if your message exists there or not but give it a try, go to tcode OMCQ search for your message and change the system message category to "E".
regrds
Yogesh

No SAPscript message exists

Similar Messages

Maybe you are looking for