"No Scanners Found" HP Officejet Pro 8600

I print and scan using wifi on my laptop. I've used an Officejet Pro 8600 with Windows 7 64bit Home Premium for at least a year and it has been scanning perfectly fine using the Windows "Fax and Scan" utility until recently. Now when I go to scan I click on "New Scan" and it says no scanners found. I can scan from the printer panel to a usb flash drive inserted into the printer. I can print fine from my laptop just not scan.
After experiencing the problem I uninstalled the HP 8600 software with Windows "Programs & Installs".
I tried reinstalling the HP software using the online HP assistant but it wouldn't install (when I clicked on the link for the assistant it said it was unable to find the page I wanted).
I was able to download and run the software from the HP website but it never installed...when I clicked on "Run" to install the software nothing happend, I tried a few times. I don't see the printer software listed in my programs or the Windows "Programs & Installs.
I am still able to print, I guess it is using a generic Windows driver.
Another aside, I do not see the printer in Windows "Device manager".
So, now I am faced with a couple problems:
1. HP drivers won't install
2. I cannot scan from laptop.
Any help would be greatly appreciated.
Thanks!
Mike

Hello tootallll,
Welcome to the HP Forums.
I see that you are having some scanning issues.
I suggest that we start off by running the HP Print and Scan Doctor.
If the Doctor fails or if you see any error codes, please let me know what they are.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Similar Messages

Hp officejet pro 8600 doesn't work with yosemite

Dear,
I've installed yosemite on my mac and now scanning doesn't work, there isn't the scanning button in system/print and scan like before installing yosemite!
I've tried to delete and reinstall driver (also update driver from appstore after installed the new driver) and I've tried to use the hp scan software but nothing the softaware report that there are no scanners!
Printing works very well the problem is only on scanning and only on mac because other pc with windows works correctly!
I've tried to follow this post http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/No-more-scanning-after-upgrading-to-MacOS-X-1... but nothing the scan doesn't work also after done all the things in the post!!!!!
I've also tried to speak with the phone assistance (in italy beacuse I'm writing from italy) but they have no advice for my problem!
Please help me I need scanning with mac for work!!!!!
Thanks
marchinho

Hello ,
Thank you for contacting the HP Support Forum. I understand that you HP Officejet Pro 8600 is having issues scanning after your Yosemite update. After a little research, I found a document that might get us started in the right direction.
Try these steps first, and then please let me know if they worked or not.
Regards,
wise_owl
I work on behalf of HP.

HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper.

HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper. I would like to have a custom size to work with a card making program.

Can you help me out?
I have an HP Officejet Pro 8600 N911a
When I try to print to a custom print size (2.75" x 6" in my case), I get the same error everyone else is reporting: "Paper detected does not match paper size or type selected. Make sure the paper size or type is correct to continue the job."
I am currently trying to print using Microsoft Word for Mac 2011 version 14.4.5, but I have the same problem with printing from Adobe Reader 9.8.5 or Preview 8.0.
I am running OS X Yosemite 10.10.
My printer's firmware is "up to date" as of 28-Aug-2014.
This is what I did:
1. Open System Preferences from the Apple menu.
2. Click on the Printers & Scanners icon.
3. Click on the + sign under the list of printers to add a printer
4. Click on IP
5. Enter my IP address in the Address field (verified as "valid and complete host name or address")
6. Ignore Protocol field (default is Line Printer Daemon - LPD)
7. Ignore Queue field (default is blank for default queue)
8. Ignore Name field (default is IP address)
9. Ignore Location field (default is blank)
10. Under the Use dropdown menu, I select "Select Software"
11. HP Deskjet 9800 is not an option.
I searched for 9800, but there is no HP printer with that number in the options.
I tried selecting "HP DeskJet 980C - Gutenprint v5.2.3" to see if that would work, but I received the same error message as above. I tried selecting other random HP printers, but so far I've had no luck.
I've been googling about for a way to manually add a printer driver to this "Select Software" list, but I've found nothing (apparently, no one else wants to do this). I did not find a driver download for the HP DeskJet 9800 for OS X Yosemite 10.10 on the Drivers & Software section of the hp.com website.
Additional details on settings for Microsoft Word for Mac 2011 version 14.4.5:
Selected File > Page Setup from menu
Under the Paper Size drop down menu, I selected manage custom size.
- Click + to add a paper size
- Enter "2.75" in width and "6 in" height in the paper size fields.
- Enter "0 in" as the User Defined Non-Printable Area for top, left, right and bottom.
- Double-clicked Untiled in the custom size list and rename the size as Receipt
- Click OK to return to the Page Setup dialog box
Under Settings: Page Attributes:
- Format for "HP Officejet Pro 8600"
- Paper size: Receipt
- Orientation: "tall/portrait"
- Scale: 100%
- Click OK
Select Format > Document and set all page margins to 0.25"
Thank you.

[win7 64bit ultimate]: HP Officejet Pro 8600 Plus prints won't scan

Guys I have spent 2 days on reading and trying all of the suggestions in previous posts. My HP Officejet Pro 8600 Plus JUST won't scan. When I click to scan a Document or Photo the HP Scan pops up saying: The HP Officejet Pro 8600 was not found.
When I do unistall the HP basic software and then install again it works fine. However when pc restarts problem is still there.
I have completely uninstalled my avast Antivirus and also configured the windows firewall. No luck till now.
Tried the HP Print and Scan Doctor: It appears that the problem is in the device manager. Edited: Just looked at the device manager and spotted this >
If I reinstall it will work only till my next restart.
Any suggestions?

@N3CR4, welcome to the forums
I read about how you cannot scan and have been troubleshooting quite a bit lately, to no avail.
I have some questions and some ideas for you. If you've tried the steps, just let me know the results. Here are my ideas for you.
Have you uninstalled the printer by right clicking on them in the Device Manager, as shown in your screen shot, then restarted your PC and reinstalled?
Have you tried creating another User Account with Admin privileges and tried installing?
Try a clean boot, and restart the PC and ensure your Firewalls and Anti-Virus scanners are disabled and try running the installation.
Will the printer install successfully on another PC?
Remove the printer by using the Microsoft Fix it tool, restart the PC and try installing again.
Try unregistering and re-registering the Microsoft Windows Installer service:
1. Click the Start menu and type " cmd " in the search field and press enter.
2. Type in " msiexec /unregister " and then press enter.
3. Type in " msiexec /regserver " and then press enter.
4. Restart your PC and try the installation.
Run the SFC scan to repair any corupt files. (Run the scan 3 times if there is an issue in the results) then try installing the printer again.
Using System File Checker to Restore System Files
I really hope the steps help, let me know the outcome
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Officejet Pro 8600 Plus Scanner Software

Hi,
I'm a big fan of HP products. My last several printers, scanners and computers have all been HP.
I recently purchased the HP Officejet Pro 8600 Plus to replace an older machine with similar capabilities (ADF, duplex printing, etc). The previous machine was also an HP printer.
The problem that I'm having is that the software seems to have been downgraded. The software on my previous machine had the ability to automatically parse pictures laid on the flatbed scanner into individual JPGs. With the software on this machine, it seems that I need to manually crop each image. The options for optimizing each image, by removing scratches, automatically adjusting color, sharpening, etc. are all gone.
I really miss these features. I did find that I had been using a 'Basic' version of the software. I installed the full version and found it slightly different, but it still lacks the automatic image selection and image tweaks that I made such heavy use of.
Is there any way to get these options back?
Thank you,
--MrXmas
This question was solved.
View Solution.

NeonSkeleton,
That is unfortunate. It's a **bleep** nice machine except that the software is really a step backwards.
Is there any way to use the older software from another HP device? The standard microsoft scanner drivers don't do anything towards my need. The network connection seems to be a stumbling block for most of what's out there. I'd be happy to hard-wire via USB if that could get me the software upgrade (the speed over USB is a considerable improvement as well).
If it isn't possible to use another HP driver, do you have any recommendations for 3rd party drivers?
Thanks for your help,
Jim

My HP OfficeJet Pro 8600 won't connect to my wireless router

This is bizarre. I have had my HP OfficeJet Pro 8600 for about 6 months. It has generally worked fine, and we have used it wirelessly only. But now it refuses to connect to the router. It can FIND the router, and it can find other networks in the area, but it won't connect to the router. I ran the Wireless Network Test, and the results say:
Wireless On - Pass // Wireless Working - Pass //
Network Name (SSID) found - Pass // Wireless Networks Detected - 9
Printer Settings Consistent with Wireless Router Settings - Pass / No Filtering - FAIL //
So it recommends solution as follows: "1 If MAC Address filtering is enabled, and you would like to keep it enabled, you must add the Mac address of your printer to the list of permitted devices for your router before continuing."
Except, guess what, I don't have MAC Address filtering enabled. I wouldn't know how to do that, much less check for it.
Also, before today, this was never a problem. HELP!
Thanks....
If you are interested, here's more detail and background.
Before today, the only problem we have had is that frequently our Apple laptop (OS X 10.6) has trouble connecting to the printer. This has been odd because the printer is connected to the network, and so is the laptop, but the laptop can't find the printer - it thinks the printer is "offline" (even though it's not). Usually, if I wait a while, it will find the printer, and it will resolve itself work fine. If not, we sometimes have found that it can fix itself if you restart the laptop -- restarting the printer does not make a difference. In fact, I did exactly that today, and it resolved itself. And I printed. Fine, right?
But then I wanted to do more printing, and the problem of the laptop not finding the printer came up again, so I decided to really "get to the bottom of this." I don't remember exactly what I did, but somehow I was persuaded by the online help, that the correct solution would be to go into my System Preferences / Print and Fax, and click on the "-", which de-installs the printer, with the idea of re-installing the printer. But then when I tried to re-install the printer, it could not find the printer. Ugh! Wierdly, it found an 8600 Scanner, but not an 8600 printers. After installing and de-installing the 8600 scanner a few times, I eventually deinstalled everything, and I decided to start from scratch. I got my HP disk, and installed all the software again from the beginning (even though it was already there), and then it looked for my printer, but couldn't find it. So then I got a USB cord, and plugged that in.
So, now I have a situation where I do have a working printer via the USB cord, but no wireless connection at all. In particular, since the Office Jet Pro 8600 won't connect to the router, I don't know what else to do. My Apple MacBook pro is 2 feet away from the printer, and it is connected to the router just fine (as is my blackberry), and I have never before had a problem connecting to the wireless router by the printer.
Any suggestions?

There are two things that can trip the mac filtering test to fail: actual MAC address filtering setup (sounds like this is not the case) and using wireless channel 6 or automatic for wireless channel in the wireless network settings (in the router). Since it does show failed for MAC filtering and you do not use this option, try changing the wireless channel in the router to 1 or 11. Those two channels provide the best compatibility with printers due to less interference. Almost everything defaults to auto or 6 for the channel and this causes a lot of interference. This change should not affect anything at all. To do this, you may need to contact the router manufacturer as the process differs from router to router.
What brand and model is the router?
Has anything in the network settings changed at all?
What version is the Mac OS X? There may be additional steps to take as it sounds like there are two separate issues involved and this could be revisited later.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

OCR with HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g

Hello: I have the "HP Officejet Pro 8600 Plus e-All-in-One Printer model N911g" and read in the manual that it comes with Optical Character Recognition (OCR) software. I can't find any OCR software on the accompanying optial disk "HP Officejet pro 8600 series, Windows XP, VIsta, 7, 8 version 28.8".
I'm using an HP Pavilion dv7 laptop running Windows 7 Home Premium ver 6.1.7601 Service Pack 1 build 7601.
I found an entry in All Programs called I.R.I.S. registration but can't figure out what to do with it. Any help is appreciated.
Thanks,
John

Hi,
It's an option during the installtion process. Please try the following Utility:
http://ftp.hp.com/pub/softlib/software12/COL29914/HU-135728-1/hpusetup.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Officejet Pro 8600 - Macbook Pro and Macbook Air will not print

Products:
HP Officejet Pro 8600
Macbook Pro (Mac OS X, Version 10.7.5)
Macbook Air (OS X, Version 10.8.2)
Question:
Why did my Macs initially print fine, but now will not print at all?
Full Story:
I have a wireless network at my house that consisted of a 30mb cable internet, Netgear 900n, HP Officejet Pro 8600, 2 Dell Laptops with Windows 7, a Lenovo Laptop with Windows 7, and Dell Tower with Windows 7 - All printed just fine.
The HP Officejet 8600 was added to my network about 2 months ago.
I added a Macbook Pro and a Macbook Air about 3 weeks ago. Both Macs printed just fine for about a week. Then suddenly they stopped. I spent about 2 hours on the phone with HP Service, and they finally said it must be my router. So I called Netgear. Netgear was useless! They wanted me to agree to charges for services before they would even discuss the issue.
Due to information provided by HP's service support, and because Netgear will not support their product, I promptly purchased a new router - an Apple Airport Extreme.
The Macs recognize the printer, will print if hardwired via a USB cable, but will not print wirelessly to the Officejet Pro 8600. The PCs print fine.
The frustration that is being felt is compound by the fact that the Macs printed just fine with the Officejet Pro 8600 2 weeks ago, and now the printer just shows "idle"... even with a new router. (see image below)
Please help, I appreciate any support.
As a side note, the HP Service rep was very friendly, and definitely tried to support the HP Product, which is much more than I can say about Netgear.
Thank you,
This question was solved.
View Solution.

Hi,
More likely the issue related with Multicast, which Apple devices relies on to communicate with teh device through the network.
First try unplugging the router for 30 seconds.
Plug it back to the power and wait for 2-3 minutes.
Turn the HP printer Off and back On, then check for any difference.
If the same persists, try changing your router configuration as following
Note: the settings below are not related with the HP product, I provide you the steps as a best effor and those are only based on my own knowledge. you may try modifying the router settings at your own risk:
Open the router configuration page (can be found listed as the Default Gateway by clicking the Wireless icon on the printer, then print a network configuration report.
Click the Advanced tab.
Click the Setup option from the menu, then click on WAN Setup.
Make sure to uncheck the box next to Disable IGMP Proxying and Apply the changes.
Click the LAN Setup on the same Setup menu.
Set the RIP Version as RIP-2 and Apply the changes.
Reboot your router and then check for any change.
I hope you may find that information useful, you may also use the user guide below for further information:
http://www.downloads.netgear.com/files/GDC/WNDR4500/WNDR4500_UM_07DEC2011.pdf
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Officejet Pro 8600 Premium will not copy or scan.

Hello,
I have a HP Officejet Pro 8600 Premium that prints just fine however it will not copy or scan. When I attempt to copy a document it displays Starting Copy... on the printer but will not copy and must be turned off and on to use the printer again. When I attempt to scan it brings up an error box telling me to check all of my network connections.
I have already tried the services.msi fix and have ran hp printer and scannor doctor tool to attempt to fix my problem.
In the services.msi I found that all services dependant on (WIA) were already running and set to automatic.
The scan doctor found that It wasn't communicating with the drivers, which I then reinstalled, and restarted the computer. It then continued to have problems with the drivers and asked me to contact support.
Thank you for your time.
edit: The printer is also running the latest firmware and I have also checked my anti-virus firewall so that it is allowing the printer through network. (note: in attempt to fix the issue i have both a usb and network connection trying to get either connection to work).

Hi-
To make sure I understand this correctly, you are unable to do a copy at the device itself? This should function without the device being connected to a PC at all. if this is indeed the case, it sounds as if this is a hardware issue. I would then check with HP support on your product for warranty repair.
I am an HP employee, however, this content reflects my personal opinion and is in no way associated with HP.

Macbook Pro running Maverick doesn't recognize Officejet Pro 8600 Plus as a scanner

I am a new user to the Macbook, transitioning from Windows. I started with a preexisting Offciejet Pro 8500 but couldn't get it to work and discovered there were no Maverick drivers. I then bought and installed the Officejet Pro 8600 Plus wirelessly. I downloaded the HP software package for Mac. I can print. I can scan from the printer to the computer. I can use the HP Scan utility (although the HP apps folder also contains the 8500 apps and I'm not sure which is which). However, under System Preferences Printers and Scanners it only lists the 8600 as a printer and faxer; it does not appear under Scanner. And I cannot access it using PDF Converter for Mac, either. And it refuses to scan an entire legal page, stopping at the letter page limits, whether I use the document feeder or just place it on the glass.
( I also cannot figure out how to set up Network scanning - it asks for a folder address and I am not familiar with iOS nomenclature.)

Hi lahrm
I understand you are having issues scanning on the Maverick.
I will be happy to assist you with this.
I have included a document for how to scan on the Maverick.
I have provided a document for connection issues.
This document provides directions for scanning to a network folder.
If you need more assistance just let me know.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Officejet Pro 8600 Plus connection issue - HELP!

I have a strange issue: after some hours, the communication link is dropped between the computer and printer. When this happens, IE becomes unusable and will not connect to anything. This is replicated on three XP home machines. The fourth, a vista ultimate machine, does not seem to be affected (yet). I get the "scan to computer is disabled" error. It cannot be re-enabled. At this point I cannot print either. I can reach the embedded web server on the printer via firefox and can still surf using firefox. I can ping the printer, but again once the connection is dropped, no printing or scanning to the computer. The only thing I've found that resolves the issue (temporarily) is to reboot the computer, which just starts the cycle again.
last night I installed the software on an XP machine and the laptop to test when the connection dropped. They lasted from 7pm Monday until I got home at 5pm Tues. The machines were not used. Once I started using them (firefox only), then they dropped the connection within a half hour of each other around 7pm. The other XP machine lasted from 7pm Mon until 7am tues, when my wife started using it and then noticed it dropped sometime that tues between 7 and 9AM. An 11am tues reboot ran OK until 10 pm tues when connection was lost again (and IE is now dead). The Vista machine has been running since 7pm monday until now (930pm tues) and still seems to be holding.
printer hardwired, to router, static IP, 100-full link speed (also tried 10-half)
router dlink di-655
two XP machines are hardwired, vista is hardwired, and last xp machine is a laptop on wireless.
I've swapped cables rebooted and reinstalled multiple times. I must have a file a mile long on the support phone line. They were unable to fix it. I asked this to be escalated, but who knows when I'll get a response.
I've toggled firewalls - XP built in
I've uninstalled anti virus software
I've even put up with crazy suggestions from tech support like changing the router channel (uhh, it is wired!)
one xp machine had an AIO 4215 hooked via USB and the others printed to it via network, but the printer has been deleted from the networked machines.
I can ping 127.0.0.1 which is supposed to indicate the tcp service is OK.
I have not reset winsock .. I can see one machine being bad, but three????
malware / virus scan shows no issues. Again one maybe, but three??
The only thing I can think of is that there is something in the XP networking stack that conflicts with the new 8600 software as hours pass. Perhaps there is some polling operation that goes on then dies after some time, then it kills IE as it dies.
When the printer works it is great, but rebooting is not a permanent solution to this.
any suggestions would be greatly appreciated!!!!!! I am stumped and so is tech support. They are sending it to engineering, but who knows when they will respond.
thanks in advance.
This question was solved.
View Solution.

well it looks like I have a working solution ... I downloaded a freeware file called process.exe . I made a cmd file via notepad with the following contents:
rem this is to keep the HP network printer communicating with the desktops
rem
process -k "hpnetworkcommunicator.exe"
rem
process -k "scantopcactivationapp.exe"
rem
"C:\Program Files\HP\HP Officejet Pro 8600\Bin\HPNetworkcommunicator.exe"
rem
Start "" "C:\Program Files\HP\HP Officejet Pro 8600\Bin\ScanToPCActivationApp.exe" -deviceID CNXXXX:NW -scfn "HP Officejet Pro 8600 (Network)"
the XXXX is your printer serial number with an extra character or two. Pull that number from the port tab after you pull up "properties" for the 8600 printer.
This cmd file basically restarts the printer link. It opens a command window that launches the program to re-establish the link.. then it closes the command window. The launched program shows that the communication link is dead (just for a few seconds), but then it makes the connection... THEN you hit the close button and coninue your work until it dies again.
I may have it autorun every X hours if I can narrow down a good time. Until then I have a shortcut on the desktop to "FIX HP LINK" ... I only had to do this for my XP machines, as the vista one seemed OK.
What ticks me off is that I shouldn't have to do all of this diagnosis. It would be nice if there is a fix in the pipeline so the link stays stable al the time. I've spent hours trying to figure this crap out.
Anyhow, I hope the time I spent helps someone. PS, thanks to the OJ6500 thread that had the info for the scantopcactivationapp.exe program.
PS ... I'm still waiting for an engineer to contact me, if any HP employees are reading this.
PSS I haven't tried this without killing and restarting the hpnetworkcommunicator stuff, but it works for now.

OSX 10.8.5 CS5.5 & HP Officejet Pro 8600 Plus

I bought the HP Officejet Pro 8600 plus believeing it is MAC OSX compatable however upon trying to scan into Adobe CS5.5 suite of applications I was not able to scan into any of the Adobe CS programs. I can scan from the scanner into a PDF that the HP printer makes and place it in a folder on my computer but I cannot Scan directly into Adobe Acrobat X or any of the CS5.5 programs.
After a few hrs of searching I found on the user manual on page 50 the following
"The HP Scanning Software does not support TWAIN and WIA scanning on
computers running Mac OS X."
I need to know if this issue has been resolved and if so what is the solution or workaround to scan directly into Adobe Acrobat, Photoshop, Illustrator, Indesign or any of the other Adobe CS5.5 master suite collection.
From what I have read it seems that there are two issues here
1 most programs are moving away from twain and WIA in favor of something else forget what it is and HP moved on but did not consider backward compatability important so they didn't include what is needed.
2. Adobe could use a patch for this other format
If there is no current solution I will return the MFP (multi-function printer) and look for a replacement. I would appreciate any reccomendations from the community for an MFP that works pain free with Adobe CS5.5 and Mac OSX.
Looking for high quality scan with document feeder and flatbed, photo print capability does not need to fax.
Thank you your assistance.

facman
I am linking you to an HP Support document titled “Uninstalling the Printer Software” below. I am also providing you the link to the HP software for your printer titled “HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8” below as well.
Follow the first document and uninstall the software. Reboot the computer than download and install the linked software. This should resolve your issue.
Uninstalling the Printer Software
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02259020
HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8
http://ftp.hp.com/pub/softlib/software12/COL44234/mp-107214-1/Officejet-Pro-8600_v12.23.0.dmg
Please feel free to re-post if you have any further questions or concerns we are here to help.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

HP Officejet Pro 8600

Hi,
I'm new to the forum and hope I can get help here. I have a HP Officejet Pro 8600 and it doesn't print since I updated my late 2009 iMac and my new MacBook Pro to OS X Yosemite (it used to work just fine with Mavericks). I am connected via wifi.
I am using the latest driver (HP-Inkjet-SW-OSX-Mavericks_v12.34.37) which is offered on the HP support site for OS X 10.10 and I've also installed the latest HPPrinter Drivers3.0.
I can print a test page and I can print test- and configuration pages from the HP Utility, but I can't print an email or a pages document. It says it finds the printer and goes to 100%, but nothing happens.
I already have:
- deleted all the printers and reset the printing system
- installed the above mentioned drivers
- repaired Volume Access Rights
When I install the printer, it will not install with AirPrint checked (it says printer cannot be found) - I can only install using the HP Driver...
This is my Protocol:
E [07/Nov/2014:16:19:43 +0100] DNSServiceRegister failed with error -65537
E [20/Nov/2014:12:11:11 +0100] [Job 1] Druckerstatus konnte nicht abgerufen werden.
E [20/Nov/2014:12:15:11 +0100] [Job 2] Druckerstatus konnte nicht abgerufen werden.
E [20/Nov/2014:12:22:40 +0100] [Job 4] Druckerstatus konnte nicht abgerufen werden.
E [20/Nov/2014:12:46:07 +0100] [Job 1] Druckerstatus konnte nicht abgerufen werden.
E [20/Nov/2014:12:50:34 +0100] [Job 4] Druckerstatus konnte nicht abgerufen werden.
Scanning works just fine.
Interesting enough I can print documents from my iPhone, also connection wireless.
Thankful for any ideas, this is absolutely annoying...
Andreas

I did at around 5am, will try again tonight. Will let you know

Waiting for printer to respond officejet pro 8600

I am suddenly getting a message when I try to print from any Microsoft Office 2010 program to my Officejet Pro 8600. It says, "Waiting for pinter to respond". It only flashes on the PC screen for a few seconds, but then it takes a long time for the printer to come to life and get started printing the document.
In addition, I had one Word document that was taking forever to print. Both issues started a few days ago. The document is mostly a drawing, with a bit of text. It used to print just fine. I deleted the document, made a new scan of the drawing, added the text and saved it to a new folder in case there was a problem with the destination folder. Nothing happened. I tried doing the same thing making it a Publisher document. Same thing happened. Every other document prints fine (except for the wait time for it them begin) I uninstalled/reinstalled the printer and drivers, did a repair of the Office software. No change.
I downloaded and ran the HP Print & Scan Doctor. It found no problems.

Hey @sldmsh,
Thanks again for getting back to me. After some additional digging I did find this Microsoft Support document that seems to describe what you're experiencing:
The size of the EMF spool file may become very large when you print a document that contains lots of...
There is a suggested fix under the Resolution section of the document that you can try. By enabling the 'Print directly to the printer' feature you avoid spooling print jobs.
Should the issue still occur I would recommend that you reach out to Microsoft Support for additional guidance.
Microsoft Support Community
It has been a pleasure working with you. I wish you luck going forward with this!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

HP Officejet Pro 8600 - Print Preview is not available

I have a new HP Officejet Pro 8600 AIO printer that I purchased last week. I hooked it up to print in a network environment. I have thee window xp systems and three windows 7 systems printing to it with no issues.I am very happy with it. Yesterday my wife told me that when she printed she missed the print preview that our former printer had. I thought I would easily get into the HP 8600 printer program and setup the print preview option. To my surprise after checking in numerous areas and online, I found out that it looks like the option has been left out or not provided for the printer by HP. I realize the MS Office and many other programs have their own print preview however when being online with Google Chrome or Internet Explorer, you quickly realize that the option to select the pages you want to print and not print could save alot of wasted paper and ink. Someone please tell me that a print preview software option is in the works for this otherwise great printer! I can not imagine leaving this out of the printing software package provided.

Since HP isn't answering me on the 'Print Preview' being available soon or which HP printers software actally HAVE the 'print preview' function enabled... I did some searching and I found a partial answer to the 'print preview' delema. The web site http://www.obviousidea.com/windows-software/greencloud-printer/
has a free program called GreenCloudPrinter which, in a nut shell, will install a printer? called GreenCloud which set itself up as the default printer and any file that is sent to the printer gets directed to the GreenCloud device which will then bring up a 'print preview' screen with options to remove blank pages and or print or not print the preview! And a lot of other functions too. Works great and it's free. You do have to register it and a registration code is emailed to you to unlock the program. I hope that helps you out... worked for me.

"No Scanners Found" HP Officejet Pro 8600

Similar Messages

Maybe you are looking for