No Screen-dim Power-off Warning

Running the latest software, both iTunes and iPhone, and my iPhone is powering-off after 1 minutes without the "dim screen" warning that I used to get. In other words, at 45 seconds, the screen is not going dim; the iPhone just powers-off after 60 seconds.

it maybe that the sunblade is set to run max diags on the obp which means the screen will reamin blank until it starts to bootup.

Similar Messages

  • HT1766 The screen shows problems with iCloud only choices are ignore or settings, however nothing I do will unlock it from this screen, cannot power off keeps that bubble on the screen. What do I do?

    The screen shows problems with iCloud only choices are ignore or settings, however nothing I do will unlock it from this screen, cannot power off keeps that bubble on the screen. What do I do?

    Try this now.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Pop Up Screen-"must power off computer"

    I have been experiencing freezing and random shut downs of my Macbook. I recently had a gray screen pop up that said I needed to power off my computer, where it did not allow me to do anything else but shut down. Now, I am having difficulty turning it back on. Do I have a virus? How can I fix this problem?

    There are no known viruses for Mac - was the warning screen in several languages? If so, you were most likely experiencing a kernel panic.
    If you will go to your Help menu in Finder menu bar and type in kernel panic, there will be information and instructions on how to proceed. If the computer will not start, try starting it in Safe Mode (excerpt from Apple Help):
    Shut down and wait 10 seconds.
    Press the power button.
    Immediately after you hear the startup tone, hold down the Shift key (you should press the Shift key as soon as possible after you hear the startup tone, but not before).
    Release the Shift key when you see the gray Apple logo and progress indicator.
    To leave Safe mode, restart the computer normally.
    If the computer successfully starts in safe mode, choose Apple menu - Software update and then download and install any updates available.
    Uninstall any plug-ins or other enhancement software from third parties.
    Continue troubleshooting as per Apple Help. You might also want to read the following articles:
    http://support.apple.com/kb/HT2546
    http://support.apple.com/kb/HT1392
    http://support.apple.com/kb/TS1892
    Hopefully this will help you troubleshoot the issue causing the kernel panic.

  • Cannot access safari but a small window appears on screen, cannot power off or restart

    While on safari, it closed but has left a small window of page i was surfing, I cannot power-off ipad and will not let me go on safari or access anything

    Close Safari and reboot your iPad. If you cannot close Safari or navigate to the home screen, just try the reboot described below.
    Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to Safari if you don't see it, and then swipe "up" on the app thumbnail to close it.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Sos curve 8520 white screen and power off

    hello!! i have a curve 8520 and for some weeks now it shuts down every now and then.if i'm on the phone or in an app and generally use it,the screen gets all white.i cannot even turn power off with the button,so i remove the battery and place it again.but if i do not connect it to the pc or charger,again the screen gets white on the reboot.i don't know if you understand what's going on because i wrote so many things,but i would appreciate your help!!thank you so much!

    Hello helenakallas, 
    Sorry to hear about your issue. 
    In this case we can try to reload the software on the BlackBerry® smartphone to make sure it is running the latest version and there are no issues with the OS.
    Here is how to backup your BlackBerry smartphone http://bbry.lv/oPVWXc
    Once you have backed up your BlackBerry smartphone please follow the link below to complete a clean reload of the BlackBerry smartphone software.
    Link: http://www.blackberry.com/btsc/KB03621
    Once completed test it and proceed with a selective restore, here is how to restore http://bbry.lv/qgQxLo
    Thank you
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Blue screen on power off

    Hi, my MBP is showing a blue screen and freezes with the moving wheel after I power it off. What should I do? Thanks.
    OS=Snow Leopard

    Disconnect all peripherals from your computer.
    Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
    Select your language.
    Once on the desktop, select Utility in the menu bar.
    Select Disk Utility.
    Select the disk or volume in the list of disks and volumes, and then click First Aid.
    Click Repair Disk.
    Restart your computer when done.
    Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer.

  • When rapidly tapping my ipad 2 screen, it zoomed in really far and now I can't zoom out of it, pan around the screen, or power off.

    This has made it basically unusable, when I've only had my ipad for 3 days. What can I do?

    In the event that you turned on Zoom in Settings>General>Accessibilty>Zoom>On .... Try triple clicking the home button and if that returns the screen to normal - go the settings and shut it off. You can also try double tapping with three fingers and drag to change Zoom.
    If you didn't enable Zoom, reboot the iPad.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Front Row - Can you dim/turn off screen?

    Is there anyway to havethe screen dim or off when running Front Row, ie so can use it in a bedroom and not have the glow?

    Use keys F14 and F15 to adjust brightness "just prior" to using front row. At least those are my defaults.
    iMac 17" Intel Core Duo   Mac OS X (10.4.5)  

  • Pre time stops "working" when screen dims/locks

    the time on my pre stops "working" when the screen dims/turns off - what i mean by this is that when I wake up the phone the "old" time (time that i last had the phone awake) displays and then quickly updates to the current time.
    The worst part about this is that alarms will not work because it does not know the real time when the screen is off!!
    If the phone is on the touchstone everything works fine
    can anyone help!!!?
    thanks, Gavin
    Post relates to: Pre p100eww (Sprint)

    Hello Gavin and welcome to the Palm forums.
     What trouble shooting steps have you tried so far?  Have you tried restarting the phone?  Reloading webOS using the webOS Doctor tool?
    Alan G

  • I can't power off my c2d laptop

    nicholas@11:54:30:~$ uname -a
    Linux LNZJU 2.6.19-beyond #1 SMP PREEMPT Fri Dec 15 17:41:19 EST 2006 i686 Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz GenuineIntel GNU/Linux
    I've tried the following commond, but it always hangs with the screen displaying "Power off"
    shutdown -h now
    halt -p
    poweroff
    BTW: I can reboot and laptop.

    Captain Spaulding wrote:I've seent his bug once before on a HP laptop running Mandriva 2007. The laptop will eventually power down, it just takes minutes, often 15 minutes and more. On the HP the problem was caused by acpid and apmd running at the same time. Maybe you want to check that.
    I only has acpid, and when I googles, I when some freebsd have the same problem.

  • Resetting Phone with No Power Button and iPhone Not Backed Up Message Blocking the Slide to Power Off Feature

    I've learned how to reset the phone after an iPhone Not Backed Up message cannot be clicked off of, but my Power button is not working and I've been using the greyed out screen button to lock the screen and power off. Now it is not working to turn the phone off for a reset because the iPhone Not Backed Up message is in the way of sliding the power off feature on the screen. Do I have any options?

    Try a reset:
    Hold the Sleep\Wake and Home Buttons until the screen goes dark and the Apple logo appears

  • Screen randomly turns off or dims

    I have an iBook G4, and every now and again the screen randomly turns off. It doesn't respond to pressing and holding the power button, the only way I can turn it back on is by both taking out the battery and unplugging it, waiting 30 seconds, putting the battery back in and restarting it. If I put the power lead in before restarting then the display switches off almost instantly during boot up.
    Other times the screen randomly dims really dark so that you can only just see outlines, in this situation it responds to pressing the power button and then enter to shut it down, and then after booting it back up it's fine ...until the next time.
    The problems happen as often as every five minutes on some days and then not at all on others. Both occur when using the battery AND power lead, often (but not always) when the power cord is moved. Also I can get my power cord to flicker between green and orange if I wiggle it - not a good idea I know, I don't do it regularly
    I've tried resetting the PMU with no success. Also I've tried swapping my battery and power lead with a friend, they had no problems using mine (and couldn't replicate the green-orange flickering), and I still had problems using theirs.
    I read someone else's topic with suggested that the problem could be deficient soldering on the DC-In Board, so I've had a look. I'm no expert but the soldering looks ok to me, except one of the 3 metal legs connecting the actual socket bit to the board (the one which would be at the bottom under the yellow tape in http://www.macrecycling.com/images/products/922-6254.gif ) is looking a bit black and has discoloured the yellow tape black immediately on top of it. Looking at the circuit board though, this leg doesn't seem to connect to anything!
    I've read numerous topics regarding similar situations and popular diagnosis include problems with:
    * battery/power lead (I'm pretty confident it's not this)
    * DC-In Board
    * GPU
    * Inverter cable
    * Inverter
    * Backlight
    From the information I've given does anyone know what is most likely the cause?
    I'm a poor student, my iBook's well past it's warranty, and I hear repairs start in the £100 region (also I've rumours the apple stores have stopped taking in iBooks for repairs now). So home repair is pretty much my only option at the moment, and any advice would be greatly appreciated.
    Thanks in advance

    I had the same trouble, but today my iBook died after draining the battery. It just drained it and it did not charged the batt while connected, also the iBook makes a small buzz sound while connected (and it does not do so while powered by the batt).
    I researched and found that it is the DC board's fault, because it failed at charging while working fine on pure battery power.
    i confirmed because powering up always worked perfectly while on battery power, (just as in your case).
    The blackness you describe is possibly a short circuit, and you should look into it as quick as possible, before you get to a situation like mine.

  • Ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?

    ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?

    Let the battery fully darain. After charging for an least an hour try a reset and restore. Use Recovery mode if necessary.
    If not successful, then time for an appointment at the Genius Bar of an Apple store.

  • My MacBook Pro is apparently powered on, but no screen display and cannot power off.  Cap lock works so keyboard is working but trackpad not responding.

    MacBook Pro is powered on but no screen display.  Track pad not working and cannot power off.  Have tried wireless mouse and no response.

    Bring it to an Apple store or AASP. Power down by holding the power button down.

  • I have an iMac running Lion and W7 with boot camp . It has been operating flawlessly until I went to reboot into Mac tonight. Screen went black, and system is unresponsive. I've tried force quitting and turning power off. Hard drive starts but that's it..

    I have a 5 month old  iMac running Lion and W7 with the latest version of boot camp . It has been operating flawlessly until I went to reboot into Mac tonight. Screen went black, and system is unresponsive. I've tried force quitting and turning power off. Hard drive starts, there's a small amount of drive activity and that's it. 

    Hi Jane, your info may still be there, look in the Users folder at root of the drive, how many users are there there?
    It sounds like this may have happened...
    Return to default desktop, apparent "loss" of home directory, (it can happen spontaneously too)...
    http://docs.info.apple.com/article.html?artnum=107854

Maybe you are looking for

  • How do i delete songs using iTunes from macbook pro

    i synced my iphones to a new i tunes library and now i have three unwated songs how do i delete them?

  • DOC reverse.

    Dear all,                         user had reversed two documennts but they ha dnot flagged the item as ok at the item level .At Miro F.I person is having these two mat doc. & these two doc are automatically selectec with yellow line the FI guy says

  • Slow tcp traffic over ge0 interface

    I have a server that while using ge0 for UDP traffic, it uses full bandwidth, but for tcp is slow as hell.... ttcp is showing how slow it is, into the kbps rather than mbps. I want to know if there is a specific patch to fix this.

  • Importing VERY slow

    I have a Dell Inspiron 9100 laptop running XP, and ever since I installed itunes 5 my importing rate hasn't been faster than 1.8x and sometimes as slow as 0.8x. Before this new itunes, it would go at least 2.5 times as fast. Any ideas on what to do?

  • Analyzing the minidump.mdmp provided in DevCenter

    How do I analyze the minidump.mdmp file provided in the crash report in the devcenter for Windows Phone 8 Apps When I try to debug the file it cannot load my symbol files since the files on the phone are intermediary compiled files (.ni.dll). Is is p