No screen light Nano 3rd

1. Make sure the Hold switch is not operated (i.e. you have it set so that the Red is not showing on the switch.
2. Press and hold the Centre and Menu buttons at the same time, keep them pressed until the Apple Logo appears on the screen (this can take a while, over 10 secs, so keep them pressed).
That should reset the iPod, if it does not work, then try step 2 again with the Hold switch in the other position.
Ian

Similar Messages

TS1363 white screen on nano 3rd gen

My 5 year old nano ipod 3 rd gen has a white screen. What can I do to fix it?

If none of the usual 5 R's of troubleshooting do any good, you'll need to have the iPod either serviced or replaced as the LCD screen or ribbon cable is damaged or faulty.
http://www.apple.com/support/ipod/five_rs/nano3gen/
B-rock

Blank White Screen - iPod Nano 3rd generation

When I removed the iPod from its docking station today the screen went blank (white). It's still fully functional - plays music, volume up and down etc. However, it's extremely difficult to use without the screen.
I have read various offers of solutions - such as:
Holding Menu & Select button - but Apple logo does not display and cannot reset
Heat up - I've tried placing on a radiator to warm connections - no change
Run down battery and reset - not change
Any other idea please?

1. Make sure the Hold switch is not operated (i.e. you have it set so that the Red is not showing on the switch.
2. Press and hold the Centre and Menu buttons at the same time, keep them pressed until the Apple Logo appears on the screen (this can take a while, over 10 secs, so keep them pressed).
That should reset the iPod, if it does not work, then try step 2 again with the Hold switch in the other position.
Ian

HT1384 My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?

My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?
I've run diagnostics. Can't find device. I've tried resetting. The toggle has been turned on and off.

Cable works fine on my other iPod. Reset by pressing menu and center button together for 6-10 seconds. Left it to charge for many hours. Started acting up while running. Suddenly the music stopped playing but my Nike + was still working for the rest of my run. Took it straight it home and plugged it in to the wall to recharge since the battery was fairly low. Looked like it recharged ok but then screen went blank and now does it not show up on iTunes, does not seem to recharge by the wall charger (apple wall charger plugged into a surge protector in India). I have turned the hold switch off and on many times.
Sounds like a repair issue, which is not easy to do in India :(

Ipod nano 3rd generation , blank screen when attached to computer, ipod will not reset??? any help please?

Hi there,
I have just purchased a 2nd hand ipod nano 3rd gen. When I received it the screen was in working order but everything from the previous owner had been wiped. I attatched to computer and all seemed well, attached it then to itunes and at first it seemed to go ok, however screen then went blank and froze.
I am now unable to restart ipod. ipos is still being recognised by itunes so I tried to restart ipod whielst attatched to itunes to to try and put into play mode but still no joy, no apple appearing on screen.
Ipod was fully charged.
Any ideas please as I am not the most technical of people and its slowly driving me mad
Kind Regards
Lindsey

How did you try and reset the iPod? To reset the iPod, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together at the same time long enough for the Apple logo to appear. Don't be afraid to try this procedure more than once.
B-rock

IPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots it doesn't recognise the select and play button

iPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots and then doesn't recognise the select and play button to show the tick. I'm helpless.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I got an iPod Nano 3rd Generation and it has scratches on the screen, and the warranty is already expired. Can it be repaired and how much is it going 2 be.?

I got an iPod Nano 3rd Generation and it has scratches on the screen, and the warranty is already expired. Can it be repaired and how much is it going 2 be.?

Hello HernanOtt,
Depends on where you have it serviced. Here are Apple's repair quotes.
http://www.apple.com/support/ipod/service/prices/
You would probably save a lot of money by having a 3rd party repair company do the job for you instead. Just do a simple Google search for iPod repair and you'll get a plethora of results.
B-rock

Ipod nano 3rd gen unit is locked, though never have done a manual lock on it. Screen is lit and lock button shows. Have latest itunes, but nothing syncs. Have done everything on supports pages including toggle hold button, etc. Screen stays locked. Help

ipod nano 3rd gen unit windows xp. Nano is locked, though never have done a manual lock on it. Screen is lit and lock button shows. Have latest itunes, but nothing syncs. Have done everything on supports pages including toggle hold button, etc. Screen stays locked. Help please.

Sounds like the hold switch is broken, meaning you'll need to have your iPod serviced/replaced either by Apple or a third party repair company.
B-rock

White screen on a 3rd gen nano? Doesn't want to reset, any help

White screen on a 3rd gen nano? Doesn't want to reset, any help?

It fast forwards. Just hold down the right-arrow key and it fast-forwards while you are holding it down. That's how I got through all the O.J. stories on my downloaded news podcasts.
doug

HT1447 My ipod nano 3rd generation does not appear as a device on my Windows 7 on the new version of itunes. Only the music that I have purchased from itunes in the past shows on the screen.

My ipod nano 3rd generation is not recognized by my Windows 7 laptop when I plug it in under itunes latest version

Hi Matt00,
thank you for your response. I followed the steps you suggested, but still no luck. Is a the fact that I am using a notebook a problem? I have been doing more searching and it seems my HP Pavilion Notebook does not have a firewire port?
Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
Hewlett-Packard HP Pavilion 17 Notebook PC
iTunes 11.3.1.2
QuickTime 7.7.5
FairPlay 2.6.15
Apple Application Support 3.0.6
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.2.6
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number xxxxxx
Current user is not an administrator.
The current local date and time is 2014-08-23 22:37:26.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
**** External Plug-ins Information ****
No external plug-ins installed.
**** Device Connectivity Tests ****
iPodService 11.3.1.2 (x64) is currently running.
iTunesHelper 11.3.1.2 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
No Universal Serial Bus Controller found.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
IPOD (G:\), iPod nano (3rd Generation) running firmware version 1.0.3
Serial Number: xxxxxx
Bus Speed: 61440
Most Recent Devices Not Currently Connected:
iPhone 4S running firmware version 7.1.1
Serial Number: xxxxx
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

Nano 3rd gen stuck on apple logo screen

How do i restore and ipod 4gb nano 3rd generation if it wont connect to itunes or computer at all... apple logo constanly flashing in and out... and wont hold a charge... ANY SUGGESTIONS????????????????????????????????

I am afraid yo need to visit the store and possibly ask for a replacement. In some cases, doing the reset will correct any issues, but by the way you describe it, it freezes with apple logo. Better to get a replacement.

Driver for Ipod Nano 3rd Gen

Hi
Just brought Ipod nano 3rd gen and plugged it into PC. It is not able to install properly - computer says it can't find driver. Any ideas how to resolve this?

I am having the same issue here.
OS: Vista ultimate 64-bit
iTunes: 7.6.0.29 (64-bit)
iPod: Nano 8gb 3rd gen
I currently have a 60gb iPod Photo that works flawlessly. I bought the Nano tonight, brought it home, and charged it up. Plugged it in, and now Windows Vista is asking for drivers for the Nano. Doesn't recognize the Nano at all.
The Nano knows it's plugged in, and is giving me the "eject before disconnecting" screen. However, Vista wants drivers, and iTunes doesn't recognize the Nano is connected whatsoever.
Can someone please shed some light on this for us? Thanks.
[edit] Yes, I have reset the Nano. Yes, I have uninstalled iTunes, rebooted and re-installed iTunes. Yes, I also tried putting the Nano into Disk Mode manually and connecting it to the system, but the system still wants drivers....
[edit2]And yes, I'm using the administrator account on the system, too.

Connecting an iPod nano (3rd generation) to Windows Vista

I have purchased an iPod nano (3rd generation) and I tried to connect it via USB to a Windows Vista Enterprise Laptop. Even though the iPod is connected (as it appears on the iPod screen), Windows fails to locate the driver to install it. I have tried several articles found in the discussions forum, reseting the iPod nano, re-installing iTunes, and rebooting Vista, but no solution given.
Please advise.
Thanks

Have not been able to connect to iTunes for months, right about the time Microsoft put out the Zune! Would love to hear from a lawyer about a class action lawsuit againat Apple since this issue has not been resolved and we are required to use iTunes. In the meantime, filing a complaint with the Federal Trade Commission!

Ipod nano 3rd gen (click wheel)

I currently have a ipod nano 3rd gen with a click wheel. I have uninstalled, reinstalled itunes and rebooted my computer already (I have windows XP). It shows up in "My Computer" as unknown but itunes will not reconize the ipod is connected, but does with my other ipod. I've tried changing the drive letter on this 3rd gen; but it wont appear to even change the drive letter. I believe I need to download the drivers (its what i had to do with my previous ipod) but I would like a clue where to download the drivers from, or someone to shed any light and a solution for this issue. My ulitmate goal is to get itunes to reconize it so that I can restore the ipod
Thanks.

Clickwheel games are no longer available in the iTunes store. Sorry.
B-rock

IPod Nano 3rd generation: Only plays songs recently downloaded to my iTunes Library

iPod Nano 3rd generation (Version 1.1.3) for Windows
Any song that I download onto the iPod shows up in its library, but when I try to listen to the songs, they won't play.
The only songs the iPod will play are those that have just recently downloaded onto my iTunes library.
If the new songs aren't on the iPod, then when I try to play a song, the "now playing" screen shows up, not showing any songs, and the playlist says "playing 1 of 0"

Hi LeviBC,
It sounds quite frustrating having your iPod only play certain songs, I am quite sure I would be unhappy in similar circumstances. Let's see if we can get you up and running.
If you are having issues with your iPod nano (3rd generation) not playing some of your music, I would suggest troubleshooting using the steps found on this page -
iPod - iPod nano (3rd generation) Troubleshooting
http://www.apple.com/support/ipod/five_rs/nano3gen/
Thanks for using Apple Support Communities.
Best,
Brett L

No screen light Nano 3rd

Similar Messages

Maybe you are looking for