No Screen On Micro During Connect

When I connect my micro, it doesn't show those two arrows on the screen. I hear the little beep when it connects and disconnects, but WMP doesn't recognize it, and neither do any other file managers. It says its not connected. I can't install any firmwares because it doesn't recognize it as connected.
What to do?

I went through resuce mode and now it's not even booting to the main menu. I hope I didn't do anything wrong.
** I did every option in rescue mode. I can't even put a new firmware on. I can't do anything with it now.

Similar Messages

Screen Goes Black During Startup (after login)

Hello,
I have a 2005 Mac Mini PPC OS 10.4.11. This is the first problem I've had since purchasing the computer. This problem popped up out of nowhere. The screen goes black during startup just after I login into my account. I can hear the hard drive spin like it is finishing the startup process. The monitor power button blinks green.
I'm using the digital video cable. I tried switching to the VGA cable but the screen then goes black before the login screen.
The computer will startup in Safe mode.
I've tried Disk Utility (repair disk and repair permissions), Techtool Pro, Drive Genius, ColorSync Utility, Reset Pram, installed latest OS updates, and even re-installed the System twice (once because I removed all the Extension files and then the computer would not startup at all).
I've also tried removing cache files, plist files, startup files, preference files, and some or all of extension files.
The only applications I have recently installed were QuickTime Pro and a .flv movie player; both about a week before this problem started. I tried to uninstall them but could not figure out how.
What is the problem? How can this be fixed?
Thanks.
Richard

Howdy. I have Had the same problem as you in regards to a ViewSonic Monitor and the Mac Mini. This is my post:
Monitor failure when switching resolutions
Using Displays with the Mac mini, Apr 1, 2008, Replies: 2
Running 10.5.2 on Mac Mini G4 1.42 Ghz with ATI Radeon 9200, 32 MB VRAM and ViewSonic VX922
When switching resolutions from 1280x1024 to 800x600 or vice versa, the monitor will cut to black and the power light on the monitor switches from solid green to flashing green. Only by combinations of powering down the mini and starting it up again with the monitor on or off will bring the monitor back to life. This problem makes it difficult to play World of Warcraft amongst other games. Any feedback in regards to this problem would be appreciated.
Thank You!
At this point, I am unable to switch Monitor resolutions. If I do, the monitor goes black, and I have to power everything down and wait a while before I can restart.
I've resigned myself to not switching resolutions, but I'm wondering if you've had any luck.
Thanks for your time!
Kevin

My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seco

My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seconds back but often the person on the other end has hung up ... I can not stand it anymore, someone suggests something?
Besides these problems, there is the battery, which was bad got worse, she is not lasting more than 10 hours, even without using the phone.
Sometimes it even seems that the problem was solved, but my joy did not last long after I celebrate all the problems return, is incredible ...
thanks.
Sorry my bad Inglês.

Try a reset hold home/sleep buttons until Apple logo appears
If that does not improve try a restore
http://support.apple.com/kb/HT4137
For your information
We are NOT Apple here we are all users helping other users
so emotion is ignored

My ipod touch is shpwing the "connect to itunes" screen.. and on connecting to itunes and clicking on "restore" it shows error 3014.. what do i do?

my ipod touch is showing the "connect to itunes" screen.. and on connecting to itunes and clicking on "restore" it shows error 3014.. what do i do?

Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.

HT1695 Today for some reason my IPad won't fully connect to my iphone and tether. For instance under settings it shows next to "Wi-FiI'm connected to the Wi-Fi but at the top of the screen there is no connection symbol and in fact i am unable to load web

Today for some reason my Ipad won't tether properly. The iphone says it's connected and on the Ipad next to Wi-Fi in settings shows I'm connected but at the top left of the screen there is no connection icon and I cannot load and display web pages. My Ipad is about three weeks old and I have never had this problem before. I have rebooted but this did not solve my problem.
Any ideas?

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Hi, updated my iphone where in the middle of updated the screen showed i must connect to itunes. after connecting iphone was updated but everything was deleted. was first time on itunes , so have no backup. can i recover my pics and contacts? please help

hi, updated my iphone where in the middle of updated the screen showed i must connect to itunes. after connecting to itunes my iphone was updated but everything was deleted. was first time on itunes , so have no backup. can i recover my pics and contacts? please help

If this has happened more than once the problem is likely on your PC.
See here: http://www.apple.com/support/iphone/assistant/itunes/

RFC connection results in "Timeout during connection setup"

Hello Guys,
The RFC ABAP connection to the Solution Manager encounters connection error: "/ CPIC-CALL: 'ThSAPCMINIT' : cmRc=27 thRc=242#Timeout during connection setup."
The Solution Manager has following details:
SAP Solution Manager (700 15)
ORACLE 10.2.0.2.0
HP-UX
The R/3 QAS Customer 1 system has following details:
SAP R/3 Enterprise (620 54)
ORACLE 9.2.0.8.0
HP-UX
The R/3 QAS Customer 2 system has following details:
SAP R/3 Enterprise (620 59)
ORACLE 9.2.0.8.0
HP-UX
The RFC ABAP connection from <SID Solution Manager> -> <SID R/3 QAS Customer 1> is working correctly.
The RFC ABAP connection from <SID R/3 QAS Customer 2> -> <SID Solution Manager> is working correctly.
The RFC ABAP connection from <SID R/3 QAS Customer 1> -> <SID Solution Manager> encounters connection error:
ERROR                timeout during allocate
LOCATION             SAP-Gateway on host hemisrq.services.retail.tc.services.retail.tc / sapgw01
DETAIL               no connect of TP sapdp02 from host conssmp.servom host <host name Solution Manager> after 22
COMPONENT            SAP-Gateway
COUNTER              1152
MODULE               gwr3cpic.c
LINE                 1820
RETURN CODE          242
SUBRC                    0
RELEASE              640
TIME                 Thu Jun 5 10:55:15 2008
VERSION              2
Here's the dev_rfc0 log file
Trace file opened at 20080605 101956 METDST SAP-REL 640,0,235 RFC-VER 3 985555
======> CPIC-CALL: 'ThSAPCMINIT' : cmRc=27 thRc=242
Timeout during connection setup. Please check partner availability
ABAP Programm: RSRFCPIN (Transaction: SM59)
Called function module: RFC_PING
User: SAPBEHEER (Client: 000)
Destination: <SID Solution Manager>CLNT010 (handle: 2, , {4846C6DC-14A2-0F1F-E100-0000AC1B29D8})
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2277
CPIC-CALL: 'ThSAPCMINIT' : cmRc=27 thRc=242
Timeout during connection setup. Please check partner availability
HOST =<host name Solution Manager>
SERV =sapdp02
Checked the error code 242 "GW_TIMEOUT" and found:
Connection setup to the remote gateway has been closed because timeout has been exceeded.
The time limit can be set in parameter gw/timeout.
Changed parameter gw/timeout to value 10000, but still encounter same error message.
From OS level <SID R/3 QAS Customer 1> i can ping the <host name Solution Manager>.
fvb1:/home/stampg$>ping <host name Solution Manager>
PING <host name Solution Manager>: 64 byte packets
64 bytes from 172.27.68.239: icmp_seq=0. time=1. ms
64 bytes from 172.27.68.239: icmp_seq=1. time=1. ms
64 bytes from 172.27.68.239: icmp_seq=2. time=1. ms
64 bytes from 172.27.68.239: icmp_seq=3. time=1. ms
64 bytes from 172.27.68.239: icmp_seq=4. time=1. ms
64 bytes from 172.27.68.239: icmp_seq=5. time=1. ms
conssmp.services.retail.tc PING Statistics----
6 packets transmitted, 6 packets received, 0% packet loss
round-trip (ms) min/avg/max = 1/1/1
Any suggestions where to look ?
Regards,
Gidion

Hello Gidion,
can you please verify the hostnames/FQDN's? Because:
LOCATION SAP-Gateway on host hemisrq.services.retail.tc.services.retail.tc / sapgw01
host hemisrq.services.retail.tc.services.retail.tc
It seems to me that somewhere the domain is double used.
Additionally:
Sometime there is sapgw 01, sometime sapdp 02. Can you please check the correct service numbers / system numbers?
Regards
Holger

Windows 8.1 and most recent version of Airport Utility. Error message 6722 during connection.

New computer with Windows 8.1. I have downloaded most recent version of the Airport Utility. The utility finds by airport express but during connection I get error message -6722. I suspect Windows 8.1 is not compatible with my first generation Airport Express but before I buy a new one would like to know for sure.

More compatible than v2 of the Express which you cannot configure from windows.. all the later airport routers need v6 utility to configure them.. and this is not available for windows.
These issues arise due to all sorts of things.. the error message is very unclear in its meaning.
Plug the Express into the computer by ethernet. Do a factory reset on the Express and see if you can set it up by ethernet.
Wireless products can be a problem. Set the Express to fixed channel, 11, 6, 1 in that order.. with no security and a simply name, for both the express and wireless. No spaces and pure alphanumeric.
If the computer cannot connect under the most ideal situation nothing else will fix it.
If you have an ipad iphone with iOS v6 or later then you can use the apple version Airport utility which is much more likely to work than windows.

My iphone 3gs is not working properly, when switched on it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and more often than not just resets itself.

My iPhone 3gs is not working properly and hasn't been since about September of last year. When switched on (Quite often it won't even turn on) it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and just resets itself over and over until power is gone. Occasionally after switching on and off a few times it functions normally for a few hours and some times even a couple of days but eventually always turns itself off and goes back to the 'Update Completed' screen. Does anyone know what might be causing this and/or a way of fixing it?

Morning JordenR,
Thanks for using Apple Support Communities.
You can resolve many restore issues using the troubleshooting steps documented here.
For more information on this, take a look at this article:
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/ts1275
Best of luck,
Mario

I have an iPhone 4. I tried updating it tonight to iOS7 through my just updated iTunes. I received an error message telling me the update couldn't be completed. My phone then went to the screen asking me to connect to iTunes which can't see my phone. Help

I have an iPhone 4. I tried updating it tonight to iOS7 through my just updated iTunes. I received an error message telling me the update couldn't be completed. My phone then went to the screen asking me to connect to iTunes which can't see my phone. Help!!

micron12
Hi I had a simular problem with my iPhone 4 and iPad 3 and found that the USB connection on the computer was at fault so I moved the connection to a USB port on the Mother board.This curred my problem,see if ti works for you.
Windows 7 and windows XP

HT4623 My iPhone is locked with the connect to iTunes logo on screen. I have connected and trying to restore but it is not working. I have turned it on and off but to no avail.

This has happened doing the latest software update. I think I accidentally deleted iTunes before doing the latest update in trying to make room on the phone when it came up with limited space.
My iPhone is locked with the connect to iTunes logo on screen. I have connected and trying to restore but it is not working. I have turned it on and off but to no avail.
The restore says two hours to down load. Has anyone else had this problem.

iOS: Unable to update or restore

Re: Satellite C660-1LD Blue screen whilst trying to connect to the internet

I've been having a lot of trouble with trying to get my laptop to connect to the internet, when I was attempting to troubleshoot it, the blue screen appeared and it shut down, I didn't have enough time to read all of the information so I'm not really sure why it appeared. The laptop restarted and still couldn't connect to our wireless network, I tried numerous system restores which couldn't complete even though I tried it after I deactivated my AVG protection.
Eventually it connected and I was able to go on the internet for a short period of time with a very temperamental connection, it then disconnected again after about 15 minutes, I struggled to get it to connect again but when I eventually did the connection seemed fine and didn't drop.
I shut it down and when I turned it back on I had the same problem again, it wouldn't connect, the troubleshooter couldn't fix the problem, although a few times it identified the problem as a "problem with the wireless adapter". I tried everything I could think of, more system restores, re-installing the "network adapters" under the device manager, changing the power options to maximum for the wireless adapter and checking the the computer doesn't turn it off the save power, removing all wireless networks and then trying to reconnect to them. After about 2 hours I managed to get it to connect again after rebooting it in safe mode and the connection is fine now.
However I'm worried that I'm going to have this issue every time I turn my laptop on to go on the internet. I'm also very concerned about the "blue screen" that came up, it hasn't happened again and that was the first time I've ever seen one and I've been told by friends that its pretty severe and is known as the "blue screen of death". I don't know if this is anything to worry about or whether it was just a one off? Is it possible that my laptop could have some sort of virus or bug? Or a possible hardware problem? Any help or advice would be greatly appreciated.
I'm fairly certain that this is a problem with my laptop and not the wireless network as I can access the internet on my iPhone and the internet is working perfectly on all of my housemate's laptops.
Thank you

No its the original OS that I bought it with, its only the wireless connection that it seems to struggle with, it seems to be working fine since I had the issue with the blue screen, and when I had that issue I tried it with other wireless networks and it still wouldn't connect to any of them.
Since then a few times its struggled to connect at first but has in the end, I'm concerned that something inside the laptop could have gone wrong being the reason for the blue screen and the dodgy connection to the internet as I've never had any hint of a problem with it before. My laptop is just over a year old and I do use it a lot and regularly take it out and about when I go to University and travel to and from my hometown, so could it be its just wearing out? As I once got told laptops don't have a particularly long life if you are always moving them and travelling with them.
Thanks!

Error during connection test in C4C

Hi,
during connection test in C4C i receive Service-Ping-Error: Internal Server Error (500).
The following error shown in HCI.
Inbound processing in endpoint at https://iflmapgbt104xxxxavtaio-xxxx.intaas.hana.ondemand.com/cxf/COD/ERP/SimpleConnect failed with message "Error reading XMLStreamReader.", caused by "WstxEOFException:Unexpected EOF in prolog
at [row,col {unknown-source}]: [1,0]"
Message Processing Log{
IntermediateError   = true
MessageGuid         = AFUUKFubmbS4sE_0LvLxGiXTI0v4
Node                = xxxxxxxx.od.sap.biz
OverallStatus       = FAILED
StartTime           = Thu Mar 26 15:40:11 UTC 2015
StopTime            = Thu Mar 26 15:40:11 UTC 2015
Children [
    An error has occurred in CXF Inbound Request{
      Error               = Inbound processing in endpoint at https://iflmapgbt104xxxxxavtaio-xxxxx.intaas.hana.ondemand.com/cxf/COD/ERP/SimpleConnect failed with message "Error reading XMLStreamReader.", caused by "WstxEOFException:Unexpected EOF in prolog
at [row,col {unknown-source}]: [1,0]"
      StartTime           = Thu Mar 26 15:40:11 UTC 2015
      Status              = FAILED
Can anyone help me on this issue?
Cheers
Florian

Hi Ginger,
somehow, yes :-) I deployed the iFlow for customer master replication. After creating a customer the trace looked different and terminated at the reverse proxy. So the simple connect somehow is not able to do the same...
Cheers
Florian

Only screen saver appears when connected to HDTV

Only screen saver appears when connected to HDTV?

Check the Energy Saver and Screen Saver settings, sounds like you have Energy Saver kicking-in before Screen Saver.

Macbok pro screen goes dead during the startup process

Everything was working fine tonight until the computer went to sleep. After that I couldn't get the screen to stay on. I restart and it seems typical then the screen goes dead while the laptop continues to boot. Any ideas? The screen stays on during firewire target disk mode, ***!
Message was edited by: Dennis Murray

It's a warranty issue. Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

No Screen On Micro During Connect

Similar Messages

Maybe you are looking for