No scrolling of Events in Day View

In the latest version of Snow Leopard (10.6 as of this writing), iCal day view does not allow scrolling of events. If the amount of events in a day goes beyond the bottom of the screen, there is no way to scroll to see the rest of them. The user must cut some of the top ones and paste them into a different day in order to see the bottom ones. Scrolling of events in day view is needed to solve this problem.
Anyone have any tricks for avoiding cut-and-paste to see iCal events when they go below the screen?

can you change the height to 100% and see whether you have the same issue

Similar Messages

HT202337 list all-day events in day view on Mac icalendar with Yosemite upgrade

Before I upgraded to Yosemite, I loved that the day view of the iCalendar on the Mac showed all the calendar events (including all-day events) in a list view. Now that I have upgraded, the day view shows in the same format as week view with timed events primarily displayed and all-day events at the top in a small section with a scroll bar. I use all-day events a lot, and would much prefer the list of events (including all-day events) when looking at the day view! (It is this way on the iPhone, but no longer on the Mac icalendar.) How can I get back to this listed events in the day view?? Or if not, is there a way to move down the bar underneath the all-day events section (to show more of the all-day events at a time)? PLEASE? Help?? Thank you in advance!!

Carriebrandon03,
To Repair Disk Permissions, Home Folder Permissions and ACLs in Recovery Mode. Do the Following:
Shutdown your Mac > on reboot hold down the ( Command ) and ( R ) keys.
If prompted > Select the best language suited for you and tap the Arrow in the bottom middle >
On the "OS X Utilities" Window that comes up select Disk Utility and press the Continue Button > Select the indented Hard Drive mine is Macintosh HD > If you have FileVault enabled you may have to unlock the drive, I don't so I'm not 100% sure > Click the "Repair Disk" button, wait until you see "The Volume Macintosh HD appears to be OK" It will be green > Click the "Repair Disk Permissions" button wait until you see "Permissions repair complete" > Hit the Red X top left corner to close Disk Utility. > You will see the "OS X Utilities" Window again.
Select Utilities ( Menubar ) > Terminal > In Terminal type:
resetpassword
The "Reset Password" Window will open behind Terminal > Select your Hard Drive mine is Macintosh HD > On the drop down select your User's name > Click the "Reset" button bottom right > repeat for each user.
Select  ( Menubar ) > Shutdown
Screenshots Included below to help guide. Sorry about the quality of some of the shots as I had to take the photos of my screen.
Hope that helps,
Weston

I can only see 5 "All Day Events" in Day View.....

.... then I need to scroll down. Is there a way to 'expand' the All Day Events area so they are all visiable without scrolling? Thank you!

What IOS are you using?
With IOS7:
Settings > Notification Center > Calendar Dy View: ON
then scroll down to INCLUDE section
      Tap Calendar
          ALERT STYLE: Alert
          Calendar Alert > choose a sound here
          Show in Notification Center: ON
          Include > 5 items
          Show in Lock Screen: ON

Calendar events disappear in "Day" View. iphone4

I am resubmitting this problem in the correct forum.
I have two separate event entries in the calendar, one on the 31st Oct and another on the 1st November. While in the "Day" view and scrolling foreword from the 29th, the event on 31st October is visible but the event on the 1st November is no longer there. However, when I scroll backwards in the day view from the 2nd November, the event in the 1st November is now visible and the event on the 31st October, which was visible while scrolling forward, is lost. Both these events are visible in list view and month view. This can be repeated over and over. I have added new events into these same dates and the same problem exists with the new entries. My worry is that this event loss may occur on future dates as well - losing an appointment is a big deal!

I have pretty much the same issue except the bolded part.
{quote:title=EagleOwl wrote:}However, when I scroll backwards in the day view from the 2nd November, the event in the 1st November is now visible *and the event on the 31st October, which was visible while scrolling forward, is lost.*{quote}
And yeah, there are other dates where the events will behave like the ones on November 1st.
For example: February 1st and March 1st 2010... August 1st 2011... October 1st 2012, and so on...
I noticed that they all have something in common: they don't have any "grey" dates at the beginning of the month (in "Month" view)...

Calendar Events design on 'Day' view

Hi,
I noticed a change in my iPhone calendar.
I remember that the colors and design of events under the "Day" view were different in lower versions of iPhone (I'm using 4.1). The colors used to be more vivid and the design of an event was 3D like. Also the font of the event it self was White.
Now, in 4.1 the colors in calendars are not vivid and the design is flat.
Have any of you guys noticed it?
Thanks,
Lior.

I have pretty much the same issue except the bolded part.
{quote:title=EagleOwl wrote:}However, when I scroll backwards in the day view from the 2nd November, the event in the 1st November is now visible *and the event on the 31st October, which was visible while scrolling forward, is lost.*{quote}
And yeah, there are other dates where the events will behave like the ones on November 1st.
For example: February 1st and March 1st 2010... August 1st 2011... October 1st 2012, and so on...
I noticed that they all have something in common: they don't have any "grey" dates at the beginning of the month (in "Month" view)...

ICal events that are visible in Week/Month views but not day view!

I manage our iCal services for 10 users via iCal server. Everyone has their own calendar and then delegates read/write access as appropriate. In what seems to be a very random and not very reproducible problem we have a few events that are visible from week view and month view, but the event doesn't show up in day view. This is a huge problem when scheduling if we don't see other events in day view and it's a real pain to have to switch views to double check.
Anyone else have this problem?
Anyone know the specifics that cause it, so I can prevent it?
Any fix for said issue?
Thanks!

If they are in photos view then they are in an event unless you have a corrupted library
How are you"merging" the photos?
most common issue is either bad sort (view menu ==> sort events) or bad camera dates
select one and show event to see the event
LN

Some all day events don't show in day view

We are using Leopard server to host iCal with various machines running 10.5.8 Leopard and 10.6.7 Snow Leopard. We have 16 calendars we share under Delegates. Some calendars (on Leo & SL clients) are missing a specific "all day" event in day view but they are there in week and month view. The missing item is the same one across all machines. I've checked delegations but that does not fix it. I'm still doing a survey, but most of the machines missing the events are running SL. Anyone having this experience? Thanks

I take it then you don't have a memory problem. Just to clarify, your events on the calendar are fine, it's just the display
on the home screen where they disappear?
Have you tried a battery pull to reset all options? Pill the battery from the phone while it is ON, leave it out for about a
minute and replace. Leave the system completly reboot 1-2 minutes and see if the problem continues. This is a common fix on these forums.
Let us know!
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Showing more All-Day Events in Month View?

Even with the iCal window maximized, when more than 4 All-Day events take place on the same day, Month View shows "..." instead of the usual All-Day colour bar, even if there's still half the space left in 'box' for that day....
To be clear: it shows the first 4 colour bars for the corresponding all-day events, then "..." at the top to show there are more, you have to switch to Week or Day view to see them
I looked at the plist and can't figure what could be changed.... any tips? It would really be convenient to see the maximum possible number of All-Day events even in Month view.
Merci!
François
iBook G4 Mac OS X (10.4.5)

Unfortunately, it appears that this is intentional. The iCal Help file states:
"If you're in Month view and you see three dots (an ellipsis) at the top of the day, there is not enough room to show all the events on that day. To see all the events in Day view, double-click the ellipsis."
I suspect that half of the box is saved for all-day events and half for timed events. On my iMac G3, I get three dots and 3 events, on my G5 with a much larger screen I get three dots and 4 events. If anyone figures out how to alot more space to all-day events, it would be a big help.

ICal day view upcoming events list--can it be turned off?

Just upgraded to 10.7 and the changes to iCal (v. 5.0.3) are horrifying. I plan most of my daily work on iCal and really need the Day view of the calendar to fill most of the window and show more details on my calendar items as it did before in 10.6. As it is now, the left half of the screen is now taken over by a list of upcoming events which gives the daily view too little space, so all my calendar items and notes are truncated. Makes it very difficult to work with. Is there a way to turn that upcoming view off? I don't understand why it's there. If I've selected "day" as my view option, it stands to reason that I don't need upcoming events for this week. The rationale behind that being there taking up all that unnecessary space is beyond me.
Barring that, anyone have any suggestions for an iCal replacement? I have a long list of other complaints but this one is a big one. If I can't fix this, I need to move on to something else.

Same question here... over a year later! Mine's about iCal 6, but it's the very same issue.
Cannot stand the scrolling list of events. When I select a day view, I want to concentrate on that day's events-- and not see a long list of other events for other days!
Rick, did you ever find a solutiion? Maybe there's a hidden Terminal command to turn it off. I kept looking for dot within the pane divider to collapse it, but it's not there. Nor is there an option under Preferences!
Long live Snow Leopard and the old iCal!

How can I adjust event window size while in day view on ical?

How can I adjust the all-day event window size while in day view on ical? I have thee all-day events, but they're just a little too big to simultaneously appear without having to scroll up/down the all-day event section.

{Ctrl + Scroll wheel} does a Page Zoom and that setting is saved domain by domain.
'''View > Zoom > Reset''' while you're viewing one of those zoomed-out pages in the SmartZone.
https://support.mozilla.com/en-US/kb/Page+Zoom

Show ALL all-day events in week view

I am looking for a way to see ALL all-day events in iCal's week view. By default, it only shows up to two and a half events, and to see more you need to scroll. What's more, you don't see an out-of-view marker, so you don't always know you need to scroll. This is most annoying.
The same goes for timed events in week view. You do not get an out-of-view marker, so you don't know you need to scroll. This is inconsistent with the Cal app on the Mac, where you do get an out-of-view marker (a small line in the colour of the out-of-view event).
Is there a way to fix these issues in iCal? Or is there an iCal alternative that offers these things? I am basically looking for these things, each of which is a possible deal breaker for me (and I find it hard to figure out if iCal alternatives offer these basic functions):
Week view.with out-of-view markers.
Week view showing ALL all-day events.
Icon that shows the date (in the icon or in a badge).

I'm not sure how this got in the iPhone forum. I seem to recall posting in the iPad forum, but I may be wrong. Anyway, it's iCal for iPad I'm talking about, even though the same issues exist on the iPhone.

In ical, only since the update, when I look at the day view, I can no longer scroll down indefinitely; it stops at one day only

Since the update, when I use ical , and am on the day view, I no longer can scroll down through multiple days; it stops at one day only. Seems like a poor design change. Any idea how to reverse this?

cfromflorida,
Try swiping left/right works for me.

Multi day events in Month View.

Multi day events in month view only display on the first day. Checking all day event fixes this, but none of my multi day events are in fact all day. If I sync with my iphone, it does mark both days on the multi day event in month view.
In week view they display correctly, but I like to have the month drawn out.
I am surprised to come across this hang up. Other calendars I have used always displayed such events across the month view.
Is this a bug or lack of feature?
R

Bug or design flaw?
Try setting it as a recurring event (yeah, I know, it's not a great solution, but it gets the job done)

Multi-day events only showing up on first day of event in year view

There are several things about iCal that I find annoying (makes me miss my old Palm PDA sometimes), such as being able to set my own default meeting times, meetings being defaulted to all-day, no way to connect a contact to the event without having to invite them to join (my old Palm did this and it was a very useful tool). Each of these has many discussions already on these topics with a solution (except adding a contact to an event), such as simply typing in the meeting time when you setup the event.
However, I can't find a discussion on the following question, and therefore no solution. Hope someone out there knows the answer:
Why do Multi-day events only show up on the first day of the event in year view, and is there a way to change it?
Thanks in advance!

Greetings,
Perhaps I'm not setting up my events as you are but I see a color for each day of my multi-day event.
My steps:
1. Add a multi-day event to iCal:
2. Switch to Year view and observe the matching date range (26th - 29th):
Suggestions:
Make sure you have all your updates installed (Apple > Software Update).
Toggle the "all day" check box for the events in question and see if that makes the events show up in Year view.
If that doesn't help, please provide a screen shot of the edit window of the event in question so we can see how you have it configured:
Cheers!

Why do my events change in the day view, when I create a new event? (iCal for iPad 2)

Every time I create a new event in the day view in iCal on iPad, the other events (which I created before for the same day) change their starting and/or their ending time.
Please help!

monkeyde,
You are getting entagled in the two confusing meanings of the term pixels, namely as a unit identical to points and equalling 1/72 inch, and the basic component of raster images (and effects).
You can read on in this very recent thread:
Is there a way to get Illustrator to know how many pixels are in an inch?

No scrolling of Events in Day View

Similar Messages

Maybe you are looking for