No SD card found
Hello!
I am using an Android 4.1.1 Jellybean version of the Android operating system. I recently had to factory reset my tablet due to a couple of issues with apps, so it deleted all of my apps. When I had installed Spotify and went to open the app, it displayed a message that said "no SD card found: We found no place to store our data. Please check that you have a working SD card and free space." When I press okay, all it displays is the black toolbar at the top with the three lines in the upper left hand corner. Everything else is white.
Before I had reset my tablet, Spotify worked fine. Now that's all I can do. What can I do to fix the problem?
Please try a clean reinstall of spotify following the steps here. If you still have problems, post the information requested in the template in this post and I'll see if I can help.
Similar Messages
-
Just took delivery of a new 17" intel imac. when i first set it up, i did so at my office with a direct connect to my office LAN. it worked fine, but i used the setup assistant to indicate that it was behind a lan.
when i got it home, i can't connect to my airport extreme that i got with the same order as the imac. i keep getting no airport card found. is this a result of running the setup assistant and not indicating at that time it was to be used with an airport?
i can connect with my ibook through the airport, which is used at my wife's office with an airport, so i know the airport itself is good.
in looking at the console.log file, it says (a lot) the message
WirelessAirPortDeviceNameCopy(): no AirPort driver found
i don't get the airport fan on the top, and the airport admin utility can't find any local networks. the airport assistant says there is no card available.
i took it into compusa, and it connected just fine to their wireless network, which was not an airport. when i got it home again, it didn't work here.now here is some really weird stuff. it works for this session, first time that i was able to connect with this machine. i've been searching all day using my ibook for documentation and a solution to this.
i did a shutdown, waited a bit, then did a cold boot rather than a restart. here's the console.log from a boot where it does not connect:
Mar 11 21:17:03 localhost kernel[0]: hi mem tramps at 0xffe00000
Mar 11 21:17:03 localhost kernel[0]: PAE enabled
Mar 11 21:17:03 localhost kernel[0]: standard timeslicing quantum is 10000 us
Mar 11 21:17:03 localhost kernel[0]: vmpagebootstrap: 125329 free pages
Mar 11 21:17:03 localhost kernel[0]: migtable_maxdispl = 71
Mar 11 21:17:03 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Mar 11 21:17:03 localhost kernel[0]: 78 prelinked modules
Mar 11 21:17:03 localhost kernel[0]: ACPI CA 20051117 [debug level=0 layer=0]
Mar 11 21:17:03 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Mar 11 21:17:03 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Mar 11 21:17:03 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Mar 11 21:17:03 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Mar 11 21:17:03 localhost kernel[0]: using 1303 buffer headers and 1303 cluster IO buffer headers
Mar 11 21:17:03 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Mar 11 21:17:03 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 0:23
Mar 11 21:17:03 localhost kernel[0]: Started CPU 01
Mar 11 21:17:03 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Mar 11 21:17:03 localhost kernel[0]: Security auditing service present
Mar 11 21:17:03 localhost kernel[0]: BSM auditing present
Mar 11 21:17:03 localhost kernel[0]: disabled
Mar 11 21:17:03 localhost kernel[0]: rooting via boot-uuid from /chosen: E943FF98-5188-40B5-932B-8E13FF9491EF
Mar 11 21:17:03 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Mar 11 21:17:03 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/Appl eAHCIPort@2/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockS torageDriver/Maxtor 6L250M0 Media/IOGUIDPartitionScheme/Customer@2
Mar 11 21:17:03 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
Mar 11 21:17:03 localhost kernel[0]: FireWire (OHCI) Lucent ID 5811 PCI now active, GUID 0016cbfffe476f4c; max speed s400.
Mar 11 21:17:03 localhost kernel[0]: CSRHIDTransitionDriver::probe: 0x0
Mar 11 21:17:03 localhost kernel[0]: CSRHIDTransitionDriver::start before command
Mar 11 21:17:03 localhost kernel[0]: CSRHIDTransitionDriver::stop
Mar 11 21:17:03 localhost kernel[0]: Jettisoning kernel linker.
Mar 11 21:17:03 localhost kernel[0]: Resetting IOCatalogue.
Mar 11 21:17:03 localhost kernel[0]: Matching service count = 0
Mar 11 21:17:03 localhost kernel[0]: Matching service count = 0
Mar 11 21:17:03 localhost kernel[0]: Matching service count = 0
Mar 11 21:17:03 localhost kernel[0]: Matching service count = 0
Mar 11 21:17:03 localhost kernel[0]: Previous Shutdown Cause: 0
Mar 11 21:17:03 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Mar 11 21:17:03 localhost mDNSResponder-108 (Dec 25 2005 11: 57:53)[30]: starting
Mar 11 21:17:03 localhost memberd[37]: memberd starting up
Mar 11 21:17:03 localhost DirectoryService[42]: Launched version 2.1 (v352.1)
Mar 11 21:17:03 localhost lookupd[41]: lookupd (version 369.3) starting - Sat Mar 11 21:17:03 2006
Mar 11 21:17:03 localhost configd[34]: com.apple.SystemConfiguration.DynamicPowerStep load failed
Mar 11 21:17:04 localhost diskarbitrationd[36]: disk0s2 hfs D329733D-213C-37A7-8454-578823B14112 Macintosh HD /
Mar 11 21:17:04 localhost kernel[0]: yukonosx: Ethernet address 00:16:cb:88:19:03
Mar 11 21:17:04 localhost launchd: Server 330b in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[41]: exited abnormally: Hangup
Mar 11 21:17:04 localhost configd[34]: WirelessAirPortDeviceNameCopy(): no AirPort driver found
Mar 11 21:17:04 charles-spitzers-computer configd[34]: setting hostname to "charles-spitzers-computer.local"
Mar 11 21:17:05 charles-spitzers-computer kernel[0]: [HCIController][setupHardware] AFH Is Supported
Mar 11 21:17:06 charles-spitzers-computer lookupd[60]: lookupd (version 369.3) starting - Sat Mar 11 21:17:06 2006
Mar 11 21:17:06 charles-spitzers-computer kernel[0]: (44: SystemStarter)tfp: failed on 0:
Mar 11 21:17:06 charles-spitzers-computer kernel[0]: (44: SystemStarter)tfp: failed on 0:
Mar 11 21:17:06 charles-spitzers-computer kernel[0]: (44: SystemStarter)tfp: failed on 0:
Mar 11 21:17:06 charles-spitzers-computer kernel[0]: (44: SystemStarter)tfp: failed on 0:
Mar 11 21:17:06 charles-spitzers-computer kernel[0]: (44: SystemStarter)tfp: failed on 0:
Mar 11 21:17:06 charles-spitzers-computer kernel[0]: ATY,Wormy: vram [80000000:08000000]
Mar 11 21:17:07 charles-spitzers-computer kernel[0]: ATY,Wormy: vram [80000000:08000000]
Mar 11 21:17:07 charles-spitzers-computer mDNSResponder: Adding browse domain local.
Mar 11 21:17:07 charles-spitzers-computer /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Mar 11 21:17:07 charles-spitzers-computer configd[34]: WirelessAirPortDeviceNameCopy(): no AirPort driver found
Mar 11 21:17:07 charles-spitzers-computer loginwindow[108]: Login Window Started Security Agent
Mar 11 21:17:12 charles-spitzers-computer kernel[0]: [IOAppleBluetoothHIDDriver][init] IOBluetoothHIDDriver 1.1.4
Mar 11 21:17:12 charles-spitzers-computer kernel[0]: [IOBluetoothHIDDriver][init] IOBluetoothHIDDriver 1.1.4
Mar 11 21:17:12 charles-spitzers-computer kernel[0]: [IOAppleBluetoothHIDDriver][handleStart][00-0a-95-10-d6-04] Done.
Mar 11 21:17:12 charles-spitzers-computer kernel[0]: [IOAppleBluetoothHIDDriver][waitForHandshake][00-0a-95-10-d6-04] Unsuccessful Handshake: e00002c2
Mar 11 21:17:13 charles-spitzers-computer kernel[0]: [IOAppleBluetoothHIDDriver][init] IOBluetoothHIDDriver 1.1.4
Mar 11 21:17:13 charles-spitzers-computer kernel[0]: [IOBluetoothHIDDriver][init] IOBluetoothHIDDriver 1.1.4
Mar 11 21:17:13 charles-spitzers-computer kernel[0]: [IOAppleBluetoothHIDDriver][handleStart][00-0a-95-42-63-02] Done.
Mar 11 21:17:13 charles-spitzers-computer kernel[0]: [IOAppleBluetoothHIDDriver][waitForHandshake][00-0a-95-42-63-02] Unsuccessful Handshake: e00002c2
now, here's from this boot where it does work:
Mar 11 21:21:38 localhost kernel[0]: hi mem tramps at 0xffe00000
Mar 11 21:21:38 localhost kernel[0]: PAE enabled
Mar 11 21:21:38 localhost kernel[0]: standard timeslicing quantum is 10000 us
Mar 11 21:21:38 localhost kernel[0]: vmpagebootstrap: 125329 free pages
Mar 11 21:21:38 localhost kernel[0]: migtable_maxdispl = 71
Mar 11 21:21:38 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Mar 11 21:21:38 localhost kernel[0]: 78 prelinked modules
Mar 11 21:21:38 localhost kernel[0]: ACPI CA 20051117 [debug level=0 layer=0]
Mar 11 21:21:38 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Mar 11 21:21:38 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Mar 11 21:21:38 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Mar 11 21:21:38 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Mar 11 21:21:38 localhost kernel[0]: using 1303 buffer headers and 1303 cluster IO buffer headers
Mar 11 21:21:38 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Mar 11 21:21:38 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 0:23
Mar 11 21:21:38 localhost kernel[0]: Started CPU 01
Mar 11 21:21:38 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Mar 11 21:21:38 localhost kernel[0]: Security auditing service present
Mar 11 21:21:38 localhost kernel[0]: BSM auditing present
Mar 11 21:21:38 localhost kernel[0]: disabled
Mar 11 21:21:38 localhost kernel[0]: rooting via boot-uuid from /chosen: E943FF98-5188-40B5-932B-8E13FF9491EF
Mar 11 21:21:38 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Mar 11 21:21:38 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/Appl eAHCIPort@2/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockS torageDriver/Maxtor 6L250M0 Media/IOGUIDPartitionScheme/Customer@2
Mar 11 21:21:38 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
Mar 11 21:21:38 localhost kernel[0]: FireWire (OHCI) Lucent ID 5811 PCI now active, GUID 0016cbfffe476f4c; max speed s400.
Mar 11 21:21:38 localhost kernel[0]: CSRHIDTransitionDriver::probe: 0x0
Mar 11 21:21:38 localhost kernel[0]: CSRHIDTransitionDriver::start before command
Mar 11 21:21:38 localhost kernel[0]: in6_ifattach: lo0 failed to attach a linklocal address.
Mar 11 21:21:38 localhost kernel[0]: CSRHIDTransitionDriver::stop
Mar 11 21:21:38 localhost kernel[0]: Jettisoning kernel linker.
Mar 11 21:21:38 localhost kernel[0]: Resetting IOCatalogue.
Mar 11 21:21:38 localhost kernel[0]: Matching service count = 0
Mar 11 21:21:38 localhost kernel[0]: Matching service count = 0
Mar 11 21:21:38 localhost kernel[0]: Matching service count = 0
Mar 11 21:21:38 localhost kernel[0]: Matching service count = 0
Mar 11 21:21:38 localhost kernel[0]: Previous Shutdown Cause: 0
Mar 11 21:21:38 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Mar 11 21:21:38 localhost mDNSResponder-108 (Dec 25 2005 11: 57:53)[34]: starting
Mar 11 21:21:38 localhost memberd[41]: memberd starting up
Mar 11 21:21:38 localhost lookupd[44]: lookupd (version 369.3) starting - Sat Mar 11 21:21:38 2006
Mar 11 21:21:38 localhost DirectoryService[46]: Launched version 2.1 (v352.1)
Mar 11 21:21:38 localhost diskarbitrationd[40]: disk0s2 hfs D329733D-213C-37A7-8454-578823B14112 Macintosh HD /
Mar 11 21:21:38 localhost configd[38]: com.apple.SystemConfiguration.DynamicPowerStep load failed
Mar 11 21:21:39 localhost kernel[0]: yukonosx: Ethernet address 00:16:cb:88:19:03
Mar 11 21:21:39 localhost kernel[0]: AirPortPCI_MM: Ethernet address 00:16:cb:00:ba:fe
Mar 11 21:21:39 localhost lookupd[61]: lookupd (version 369.3) starting - Sat Mar 11 21:21:39 2006
Mar 11 21:21:39 charles-spitzers-computer configd[38]: setting hostname to "charles-spitzers-computer.local"
Mar 11 21:21:40 charles-spitzers-computer kernel[0]: [HCIController][setupHardware] AFH Is Supported
Mar 11 21:21:40 charles-spitzers-computer kernel[0]: (47: SystemStarter)tfp: failed on 0:
Mar 11 21:21:41 charles-spitzers-computer kernel[0]: ATY,Wormy: vram [80000000:08000000]
Mar 11 21:21:41 charles-spitzers-computer /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Mar 11 21:21:41 charles-spitzers-computer kernel[0]: ATY,Wormy: vram [80000000:08000000]
Mar 11 21:21:41 charles-spitzers-computer loginwindow[112]: Login Window Started Security Agent
Mar 11 21:21:42 charles-spitzers-computer mDNSResponder: Adding browse domain local.
Mar 11 21:21:47 charles-spitzers-computer kernel[0]: AirPort: Link Active: "Home Network" - a92411004af9 - chan 1
Mar 11 21:21:48 charles-spitzers-computer kernel[0]: [IOAppleBluetoothHIDDriver][init] IOBluetoothHIDDriver 1.1.4
Mar 11 21:21:48 charles-spitzers-computer kernel[0]: [IOBluetoothHIDDriver][init] IOBluetoothHIDDriver 1.1.4
Mar 11 21:21:48 charles-spitzers-computer kernel[0]: [IOAppleBluetoothHIDDriver][handleStart][00-0a-95-10-d6-04] Done.
Mar 11 21:21:48 charles-spitzers-computer kernel[0]: [IOAppleBluetoothHIDDriver][waitForHandshake][00-0a-95-10-d6-04] Unsuccessful Handshake: e00002c2
Mar 11 21:21:50 charles-spitzers-computer configd[38]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Mar 11 21:21:50 charles-spitzers-computer configd[38]: posting notification com.apple.system.config.network_change
Mar 11 21:21:50 charles-spitzers-computer lookupd[125]: lookupd (version 369.3) starting - Sat Mar 11 21:21:50 2006
Mar 11 21:21:52 charles-spitzers-computer configd[38]: target=enable-network: disabled
Mar 11 21:21:58 charles-spitzers-computer kernel[0]: [IOAppleBluetoothHIDDriver][init] IOBluetoothHIDDriver 1.1.4
Mar 11 21:21:58 charles-spitzers-computer kernel[0]: [IOBluetoothHIDDriver][init] IOBluetoothHIDDriver 1.1.4
Mar 11 21:21:58 charles-spitzers-computer kernel[0]: [IOAppleBluetoothHIDDriver][handleStart][00-0a-95-42-63-02] Done.
Mar 11 21:21:58 charles-spitzers-computer kernel[0]: [IOAppleBluetoothHIDDriver][waitForHandshake][00-0a-95-42-63-02] Unsuccessful Handshake: e00002c2
note the msg at 21:17:04 about lookupd terminating abnormally. that is the trigger that causes the airport card to not be seen, because one of the next messages should be the airport ethernet mac address.
17" Intel iMac Mac OS X (10.4.5) -
Problem with Samsung Galaxy Note 3: No SD Card Found
Hi,
I am having this problem for the past few days and am not able to use my Spotify account on my Note 3.
This is the error message when i start Spotify:
No SD Card Found
We found no place to stroe our data, please check that you have a working SD card and free space.
Your kind advice is needed.
Thanks guysI think I found a solution, and certainly found a solution for my NOTE 3 :)
Now I have spotify on internal memory, but my offline playlists are stored on the SD card :)
After installing spotify, in the "com.spotify.mobile.android.ui", i found 2 folders "Users", 1 is in the "files" and another in "spotifycache", so I suspect the second is responsible for offline content.
Here's the trick:
1. remove the SD card, install spotify, start and log in, insert the SD card.
This solves the problem of installing spotify. Before the next step, quit Spotify, go to the App Manager, find Spotify, and kill the app manualy for sure. Important ! do not clear the application data or cache.
2. On the phone's internal memory find "com.spotify.mobile.android.ui" (should be in Android / data ), copy and paste to the SD card.
(If you do not have folder Android / data on the card, create it , the files on the card must have the same path)
3. Now go back to the phone memory to Android / data / com.spotify.mobile.android.ui - you should see 2 files and 2 folders: spotifycache, Users, orbit.settings, prefs. Delete the folder "spotifycache".
4. Run spotify, download the offline playlist. A message can jump, something about "playlists desynchronization, but do not worry, it's a good sign :). The message disappears and if spotify start up, it means that you succeeded. Thats it.
To make sure it worked for u, check again directory "com.spotify.mobile.android.ui" on the internal phone memory, there should be no change so you should only see only folder Users and 2 prefs files. But on the SD card in the folder "spotifycache / storage / " should be your playlists offline ( just check the directory modification hour in file manager) .
I do not know if it will work on other phones, but maybe it is worth to try.
cheers!
P.S One more thing i found during my searching :) After copying the directory "com.spotify.mobile.android.ui" on the sd card, first I tried to clear the data from the app manager and as it turned out, both folder was removed, from the internal memory and SD card, both folders "com.spotify.mobile.android.ui" disappeared. So on clear installation, spotify sees sd card and sd isn't a problem, just don't want to install it on any data. -
Hi, I've just changed to an HTC One from iPhone, have been using Spotify Premium for 5 years and never had problems. After installing Spotify, whenever I attempt to open the app a message comes up saying No SD card found, we couldnt find anywhere to store our data etc. and then crashes.This phone has no SD card option at all. It is only internal storage, of which there is some 20gb free.The phone is running Android 5.0.2Thanks for your help!
Please try a clean reinstall of spotify following the steps here. If you still have problems, post the information requested in the template in this post and I'll see if I can help.
-
My phone displays " no simm card found" what to do?
My I phone keeps saying " no simm card found". it has a simm card. What to do?
Taking the sim card out and putting it back in is the best way. It has happened twice to my 3gs, and that is just what they did at the ATT store.
-
Devise turnoff and always get this msg ( no sim card found )
hello,
first sorry if me English not that good.
me phone is Curve 9360, OS 7.1
me first problem since 10 days evry time I restart my phone I get this msg ( no sim card found ), and me SIM card in in the devise and the network is work and I can make call.
me second problem is :- the phone always tell me the bettry is low then it empty and turndwon even after I charge the bettry 100% after call 5 min or used the BBM or anything for 10 min or 20min it tell me it empty
Note:- before that the bettre life for 18- 22 hours
I afraid if I buy new bettry the problem be not in it and I lose me moneyHi sad4king,
Check the below KB articles -
KB14320 How to maximize battery life and free memory on the BlackBerry smartphone
KB17877 How to start a BlackBerry smartphone in Safe Mode
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit -
just got my iphone5 and had it activated at verizon. I made 1 call and received one call. next attempt to call, I recd a message 'no sim card found" any suggestions?
First of all, is this a GSM or CDMA iPhone? do you have a case? If not it could have been the Death Grip. Death Grip is where if you place your hand over the bottom left black line on the iPhone 4 and the signal will be reduced. Apple should have fixed it.
-
Droid 3 No SIM card found and various malfunctions
Hi everyone,
I have had a Droid 3 phone for a few months. When I first recieved my new phone from the retailer, it had some simple OS malfunctions like resetting my wallpaper and restarting a couple times. It only lasted consistantly for a couple days so I didn't return it in the 15 day window they give. However, if I am opening and closing the slide a few times, the wallpaper problem comes back. Sometimes it does correct itself if I just turn off and turn back on. Other times I have to reset. And it will restart once in a while, but this doesn't bother me so much. Still not the biggest problem I have though.
Starting yesterday it could not find my SIM card. After searching online to figure out what that was and where it is located, I also searched solutions. All places I looked said to try to shim a piece of paper between the card the bar that holds it. That did not work. Further advice said to call the manufacturer and have it replaced. Am I able to do this? I do not have insurance on this phone. Would I contact Motorola or Verizon?
Also starting yesterday, the volume adjustment buttons started malfunctioning, they turn the phone on and off (main power is still there, just turns to sleep or awake). Once I bring the screen back on and unlock it prompts voice command and shows my contact list. Tried adjusting media sound and in-call volume too and it ends the app or ends my calls.
I'm not sure if the missing SIM card and the other problem are related or coincidence. Or if the whole phone is a dud? I'm very careful, no water damage, no dropping, but it can get beat up in my purse I suppose. I used to keep it in my back pocket until someone educated me about how bad that can be.
Any advice? Specifically can I exchange phones???
Thank you!
JenHey,
I have a Droid 3 also, and have noticed the wallpaper thing. I haven't found a cure for that one, but like you said, it is not the biggest problem. As far as the Sim card, you can go into any Verizon Wireless store and they can replace the Sim card for you. The only thing you need the Sim card for is for travelling overseas. Now, this is not true for the Droid 4 or any of the other 4G phones. The 4G requires the Sim card. But try swapping it with a replacement from Verizon. I do not think that is causing your other problems. It sounds like some of the software may have become corrupt. I would suggest backing up your data, contacts, etc and then wiping the phone back to factory settings and then reloading the Operating System software. For more info on how to do this, go to this Verizon page at http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=44747
I have wiped my device before and it doesn't take that long to reload. It was a lot faster than wiping my old Blackberry. I think that will get you back up and running smoothly. Let me know how things go.
Doc -
Hi, I no longer have any sound, not sure when this started
This is what I have:
jason-laptop% aplay -l
aplay: device_list:268: no soundcards found...
jason-laptop% lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [IDE mode] (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
01:00.0 VGA compatible controller: NVIDIA Corporation G84M [GeForce 8600M GT] (rev a1)
03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
0c:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)
May have lost sound after an upgrade.
I dont see anything related in journalctl
Edit:
Im using alsa and pulse, I see 'dummy output' in pavucontrol
pacman log:
[2013-09-07 22:08] [PACMAN] Running 'pacman -Syu'
[2013-09-07 22:08] [PACMAN] synchronizing package lists
[2013-09-07 22:08] [PACMAN] starting full system upgrade
[2013-09-07 22:08] [PACMAN] upgraded chromium (29.0.1547.62-1 -> 29.0.1547.65-1)
[2013-09-07 22:08] [PACMAN] upgraded curl (7.32.0-1 -> 7.32.0-2)
[2013-09-07 22:09] [ALPM-SCRIPTLET] updating font cache... done.
[2013-09-07 22:09] [PACMAN] upgraded fontconfig (2.10.93-1 -> 2.10.95-1)
[2013-09-07 22:09] [PACMAN] upgraded ghostscript (9.09-1 -> 9.10-1)
[2013-09-07 22:09] [ALPM-SCRIPTLET] Generating locales...
[2013-09-07 22:09] [ALPM-SCRIPTLET] en_ZA.UTF-8... done
[2013-09-07 22:09] [ALPM-SCRIPTLET] Generation complete.
[2013-09-07 22:09] [PACMAN] upgraded glibc (2.18-2 -> 2.18-3)
[2013-09-07 22:09] [PACMAN] upgraded gnutls (3.2.3-1 -> 3.2.4-1)
[2013-09-07 22:09] [PACMAN] upgraded gpicview (0.2.3-1 -> 0.2.3-2)
[2013-09-07 22:09] [PACMAN] upgraded gtk3 (3.8.2-1 -> 3.8.4-1)
[2013-09-07 22:09] [PACMAN] upgraded lcms (1.19-2 -> 1.19-4)
[2013-09-07 22:09] [PACMAN] upgraded libldap (2.4.35-4 -> 2.4.36-1)
[2013-09-07 22:09] [PACMAN] upgraded libmodplug (0.8.8.4-1 -> 0.8.8.4-2)
[2013-09-07 22:09] [PACMAN] upgraded lightdm (1:1.6.0-7 -> 1:1.6.1-1)
[2013-09-07 22:09] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2013-09-07 22:09] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2013-09-07 22:09] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2013-09-07 22:09] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2013-09-07 22:09] [ALPM-SCRIPTLET] ==> Starting build: 3.10.10-1-ARCH
[2013-09-07 22:09] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-09-07 22:09] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-09-07 22:09] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
[2013-09-07 22:09] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-09-07 22:09] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-09-07 22:09] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
[2013-09-07 22:09] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2013-09-07 22:09] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2013-09-07 22:09] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-09-07 22:09] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-09-07 22:09] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-09-07 22:09] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-09-07 22:09] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2013-09-07 22:09] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-09-07 22:09] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2013-09-07 22:09] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2013-09-07 22:09] [ALPM-SCRIPTLET] ==> Starting build: 3.10.10-1-ARCH
[2013-09-07 22:09] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-09-07 22:09] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-09-07 22:09] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
[2013-09-07 22:09] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-09-07 22:09] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-09-07 22:09] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
[2013-09-07 22:09] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2013-09-07 22:09] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2013-09-07 22:09] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-09-07 22:09] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-09-07 22:09] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-09-07 22:09] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-09-07 22:09] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2013-09-07 22:09] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-09-07 22:09] [PACMAN] upgraded linux (3.10.9-1 -> 3.10.10-1)
[2013-09-07 22:09] [PACMAN] upgraded lxappearance (0.5.2-1 -> 0.5.2-2)
[2013-09-07 22:09] [PACMAN] upgraded openbox (3.5.2-1 -> 3.5.2-4)
[2013-09-07 22:09] [PACMAN] upgraded lxappearance-obconf (0.2.0-1 -> 0.2.0-2)
[2013-09-07 22:09] [PACMAN] upgraded lxde-common (0.5.5-2 -> 0.5.5-3)
[2013-09-07 22:09] [PACMAN] upgraded menu-cache (0.5.0-1 -> 0.5.0-2)
[2013-09-07 22:09] [PACMAN] upgraded lxlauncher (0.2.2-3 -> 0.2.2-4)
[2013-09-07 22:09] [ALPM] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
[2013-09-07 22:09] [PACMAN] upgraded pacman-mirrorlist (20130626-1 -> 20130830-1)
[2013-09-07 22:10] [PACMAN] upgraded python (3.3.2-1 -> 3.3.2-2)
[2013-09-07 22:10] [PACMAN] upgraded sqlite (3.8.0-2 -> 3.8.0.1-1)
[2013-09-07 22:10] [PACMAN] upgraded python2 (2.7.5-1 -> 2.7.5-2)
[2013-09-07 22:10] [PACMAN] upgraded reiserfsprogs (3.6.23-1 -> 3.6.24-1)
[2013-09-07 22:10] [ALPM-SCRIPTLET] In order to use the new version, reload all virtualbox modules manually.
[2013-09-07 22:10] [PACMAN] upgraded virtualbox-host-modules (4.2.16-8 -> 4.2.18-1)
[2013-09-07 22:10] [PACMAN] upgraded virtualbox (4.2.16-1 -> 4.2.18-1)
[2013-09-07 22:10] [PACMAN] upgraded weston (1.2.1-1 -> 1.2.2-1)
[2013-09-07 22:10] Exited with code 0
[2013-09-07 22:11] [PACMAN] Running 'pacman -S kdebase'
[2013-09-07 22:23] [PACMAN] installed kde-wallpapers (4.11.0-1)
[2013-09-07 22:23] [PACMAN] installed exiv2 (0.23-1)
[2013-09-07 22:23] [PACMAN] installed strigi (0.7.8-4)
[2013-09-07 22:23] [PACMAN] installed attica (0.4.2-1)
[2013-09-07 22:23] [PACMAN] installed libiodbc (3.52.8-2)
[2013-09-07 22:23] [PACMAN] installed virtuoso-base (1:6.1.6-1)
[2013-09-07 22:23] [PACMAN] installed rasqal (1:0.9.30-1)
[2013-09-07 22:23] [PACMAN] installed redland (1:1.0.16-2)
[2013-09-07 22:23] [PACMAN] installed soprano (2.9.3-1)
[2013-09-07 22:23] [PACMAN] installed grantlee (0.3.0-2)
[2013-09-07 22:23] [PACMAN] installed shared-desktop-ontologies (0.11.0-1)
[2013-09-07 22:23] [PACMAN] installed qca (2.0.3-4)
[2013-09-07 22:23] [PACMAN] installed libdbusmenu-qt (0.9.2-2)
[2013-09-07 22:23] [PACMAN] installed polkit-qt (0.103.0-2)
[2013-09-07 22:23] [ALPM-SCRIPTLET] ==> aspell comes with no default dictionary
[2013-09-07 22:23] [PACMAN] installed aspell (0.60.6.1-1)
[2013-09-07 22:23] [PACMAN] installed hunspell (1.3.2-2)
[2013-09-07 22:23] [PACMAN] installed hspell (1.2-1)
[2013-09-07 22:23] [PACMAN] installed enchant (1.6.0-4)
[2013-09-07 22:23] [PACMAN] installed ilmbase (2.0.1-1)
[2013-09-07 22:23] [PACMAN] installed openexr (2.0.1-1)
[2013-09-07 22:23] [PACMAN] installed docbook-xml (4.5-5)
[2013-09-07 22:23] [PACMAN] installed docbook-xsl (1.78.1-1)
[2013-09-07 22:23] [PACMAN] installed media-player-info (19-1)
[2013-09-07 22:24] [PACMAN] installed qtwebkit (2.3.2-1)
[2013-09-07 22:24] [PACMAN] installed kdelibs (4.11.0-1)
[2013-09-07 22:24] [PACMAN] installed poppler-qt4 (0.24.1-1)
[2013-09-07 22:24] [PACMAN] installed libzip (0.11.1-1)
[2013-09-07 22:24] [PACMAN] installed convertlit (1.8-6)
[2013-09-07 22:24] [PACMAN] installed ebook-tools (0.2.2-1)
[2013-09-07 22:24] [PACMAN] installed nepomuk-core (4.11.0-1)
[2013-09-07 22:24] [PACMAN] installed kactivities (4.11.0-1)
[2013-09-07 22:24] [PACMAN] installed libssh (0.5.4-1)
[2013-09-07 22:24] [PACMAN] installed oxygen-icons (4.11.0-1)
[2013-09-07 22:24] [PACMAN] installed kdebase-runtime (4.11.0-2)
[2013-09-07 22:24] [PACMAN] installed kdebase-lib (4.11.0-1)
[2013-09-07 22:24] [PACMAN] installed nepomuk-widgets (4.11.0-1)
[2013-09-07 22:24] [PACMAN] installed kdebase-dolphin (4.11.0-1)
[2013-09-07 22:24] [PACMAN] installed kdebase-kdepasswd (4.11.0-1)
[2013-09-07 22:24] [PACMAN] installed kdebase-kdialog (4.11.0-1)
[2013-09-07 22:24] [PACMAN] installed kdebase-keditbookmarks (4.11.0-1)
[2013-09-07 22:24] [PACMAN] installed kdebase-kfind (4.11.0-1)
[2013-09-07 22:24] [PACMAN] installed kdebase-konqueror (4.11.0-1)
[2013-09-07 22:24] [PACMAN] installed tidyhtml (1.46-2)
[2013-09-07 22:24] [PACMAN] installed kdebase-konq-plugins (4.11.0-1)
[2013-09-07 22:24] [PACMAN] installed kdebase-konsole (4.11.0-1)
[2013-09-07 22:24] [PACMAN] installed kdebase-katepart (4.11.0-1)
[2013-09-07 22:24] [PACMAN] installed kdebase-kwrite (4.11.0-1)
[2013-09-07 22:24] [PACMAN] installed libmariadbclient (5.5.32-2)
[2013-09-07 22:24] [PACMAN] installed mariadb-clients (5.5.32-2)
[2013-09-07 22:24] [ALPM-SCRIPTLET] >> If you are migrating from MySQL, don't forget to run 'mysql_upgrade'
[2013-09-07 22:24] [ALPM-SCRIPTLET] after mysqld.service restart.
[2013-09-07 22:24] [PACMAN] installed mariadb (5.5.32-2)
[2013-09-07 22:24] [PACMAN] installed akonadi (1.10.2-1)
[2013-09-07 22:24] [PACMAN] installed libical (1.0-2)
[2013-09-07 22:24] [PACMAN] installed libdmtx (0.7.4-4)
[2013-09-07 22:24] [PACMAN] installed qrencode (3.4.3-1)
[2013-09-07 22:24] [PACMAN] installed prison (1.0-2)
[2013-09-07 22:24] [PACMAN] installed qjson (0.8.1-2)
[2013-09-07 22:24] [PACMAN] installed kdepimlibs (4.11.0-1)
[2013-09-07 22:24] [PACMAN] installed libkgapi (2.0.1-1)
[2013-09-07 22:24] [PACMAN] installed xerces-c (3.1.1-4)
[2013-09-07 22:24] [PACMAN] installed libkolabxml (0.8.4-2)
[2013-09-07 22:24] [PACMAN] installed libkolab (0.4.2-1)
[2013-09-07 22:24] [PACMAN] installed libkfbapi (1.0-1)
[2013-09-07 22:24] [PACMAN] installed kdepim-runtime (4.11.0-1)
[2013-09-07 22:24] [PACMAN] installed lm_sensors (3.3.4-1)
[2013-09-07 22:24] [PACMAN] installed qimageblitz (0.0.6-3)
[2013-09-07 22:24] [PACMAN] installed polkit-kde (0.99.0-2)
[2013-09-07 22:24] [PACMAN] installed xorg-xprop (1.2.2-1)
[2013-09-07 22:24] [PACMAN] installed cln (1.3.3-1)
[2013-09-07 22:24] [PACMAN] installed libqalculate (0.9.7-3)
[2013-09-07 22:24] [PACMAN] installed xorg-xmessage (1.0.4-1)
[2013-09-07 22:24] [PACMAN] installed libusb-compat (0.1.5-1)
[2013-09-07 22:24] [PACMAN] installed kde-base-artwork (4.11.0-1)
[2013-09-07 22:24] [PACMAN] installed xcb-util-renderutil (0.3.8-1)
[2013-09-07 22:24] [PACMAN] installed kdebase-workspace (4.11.0-3)
[2013-09-07 22:24] [PACMAN] installed kdebase-plasma (4.11.0-1)
[2013-09-07 22:58] [PACMAN] Running 'pacman -S phonon-gstreamer'
[2013-09-07 22:58] [PACMAN] Running 'pacman -S phonon-vlc'
[2013-09-07 22:58] [PACMAN] installed phonon-vlc (0.6.2-1)
[2013-09-07 22:59] [PACMAN] Running 'pacman -S alsa-utils alsa-lib'
[2013-09-07 22:59] [PACMAN] reinstalled alsa-lib (1.0.27.2-1)
[2013-09-07 22:59] [PACMAN] reinstalled alsa-utils (1.0.27.2-1)
[2013-09-07 23:00] [PACMAN] Running 'pacman -S gstreamer0.10-plugin'
[2013-09-07 23:00] [PACMAN] Running 'pacman -S gstreamer0.10-plugins'
[2013-09-07 23:00] [PACMAN] reinstalled gstreamer0.10-bad-plugins (0.10.23-4)
[2013-09-07 23:00] [PACMAN] reinstalled gstreamer0.10-base-plugins (0.10.36-1)
[2013-09-07 23:00] [PACMAN] reinstalled gstreamer0.10-ffmpeg (0.10.13-1)
[2013-09-07 23:00] [PACMAN] reinstalled gstreamer0.10-good-plugins (0.10.31-3)
[2013-09-07 23:00] [PACMAN] reinstalled gstreamer0.10-ugly-plugins (0.10.19-6)
[2013-09-07 23:03] [PACMAN] Running 'pacman -S pkgfile'
[2013-09-07 23:04] [ALPM-SCRIPTLET] ==> Run 'pkgfile --update' to initialize the database
[2013-09-07 23:04] [PACMAN] installed pkgfile (9-1)
[2013-09-07 23:15] [PACMAN] Running 'pacman -U /var/cache/pacman/pkg/linux-3.10.9-1-x86_64.pkg.tar.xz'
[2013-09-07 23:15] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2013-09-07 23:15] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2013-09-07 23:15] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2013-09-07 23:15] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2013-09-07 23:15] [ALPM-SCRIPTLET] ==> Starting build: 3.10.9-1-ARCH
[2013-09-07 23:15] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-09-07 23:15] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-09-07 23:15] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
[2013-09-07 23:15] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-09-07 23:15] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-09-07 23:15] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
[2013-09-07 23:15] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2013-09-07 23:15] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2013-09-07 23:15] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-09-07 23:15] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-09-07 23:15] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-09-07 23:15] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-09-07 23:15] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2013-09-07 23:15] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-09-07 23:15] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2013-09-07 23:15] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2013-09-07 23:15] [ALPM-SCRIPTLET] ==> Starting build: 3.10.9-1-ARCH
[2013-09-07 23:15] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-09-07 23:15] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-09-07 23:15] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
[2013-09-07 23:15] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-09-07 23:15] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-09-07 23:15] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
[2013-09-07 23:15] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2013-09-07 23:15] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2013-09-07 23:15] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-09-07 23:15] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-09-07 23:15] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-09-07 23:15] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-09-07 23:15] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2013-09-07 23:15] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-09-07 23:15] [PACMAN] downgraded linux (3.10.10-1 -> 3.10.9-1)
[2013-09-07 23:17] [PACMAN] Running 'pacman -Suu'
[2013-09-07 23:17] [PACMAN] starting full system upgrade
[2013-09-07 23:17] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2013-09-07 23:17] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2013-09-07 23:17] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2013-09-07 23:17] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2013-09-07 23:17] [ALPM-SCRIPTLET] ==> Starting build: 3.10.10-1-ARCH
[2013-09-07 23:17] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-09-07 23:17] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-09-07 23:17] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
[2013-09-07 23:17] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-09-07 23:17] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-09-07 23:17] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
[2013-09-07 23:17] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2013-09-07 23:17] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2013-09-07 23:17] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-09-07 23:17] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-09-07 23:17] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-09-07 23:17] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-09-07 23:17] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2013-09-07 23:17] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-09-07 23:17] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2013-09-07 23:17] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2013-09-07 23:17] [ALPM-SCRIPTLET] ==> Starting build: 3.10.10-1-ARCH
[2013-09-07 23:17] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-09-07 23:17] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-09-07 23:17] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
[2013-09-07 23:17] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-09-07 23:17] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-09-07 23:17] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
[2013-09-07 23:17] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2013-09-07 23:17] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2013-09-07 23:17] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-09-07 23:17] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-09-07 23:17] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-09-07 23:17] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-09-07 23:17] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2013-09-07 23:18] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-09-07 23:18] [PACMAN] upgraded linux (3.10.9-1 -> 3.10.10-1)
[2013-09-08 13:08] [PACMAN] Running 'pacman -S alsa-lib alsa-utils pulseaudio-alsa pulseaudio'
[2013-09-08 13:08] [PACMAN] reinstalled alsa-lib (1.0.27.2-1)
[2013-09-08 13:08] [PACMAN] reinstalled alsa-utils (1.0.27.2-1)
[2013-09-08 13:08] [ALPM-SCRIPTLET] >>> If you have per-user copies of configuration files (such as client.conf,
[2013-09-08 13:08] [ALPM-SCRIPTLET] daemon.conf or default.pa) in ~/.pulse/, make sure you keep them in sync
[2013-09-08 13:08] [ALPM-SCRIPTLET] with changes to the packaged files in /etc/pulse/. Otherwise, PulseAudio
[2013-09-08 13:08] [ALPM-SCRIPTLET] may refuse to start due to configuration errors.
[2013-09-08 13:08] [PACMAN] reinstalled pulseaudio (4.0-2)
[2013-09-08 13:08] [PACMAN] reinstalled pulseaudio-alsa (2-2)
[2013-09-08 13:09] [PACMAN] Running 'pacman -S linux'
[2013-09-08 13:09] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2013-09-08 13:09] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2013-09-08 13:09] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2013-09-08 13:09] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2013-09-08 13:09] [ALPM-SCRIPTLET] ==> Starting build: 3.10.10-1-ARCH
[2013-09-08 13:09] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-09-08 13:09] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-09-08 13:09] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
[2013-09-08 13:09] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-09-08 13:09] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-09-08 13:09] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
[2013-09-08 13:09] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2013-09-08 13:09] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2013-09-08 13:09] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-09-08 13:09] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-09-08 13:09] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-09-08 13:09] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-09-08 13:09] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2013-09-08 13:09] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-09-08 13:09] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2013-09-08 13:09] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2013-09-08 13:09] [ALPM-SCRIPTLET] ==> Starting build: 3.10.10-1-ARCH
[2013-09-08 13:09] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-09-08 13:09] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-09-08 13:09] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
[2013-09-08 13:09] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-09-08 13:09] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-09-08 13:09] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
[2013-09-08 13:09] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2013-09-08 13:09] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2013-09-08 13:09] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-09-08 13:09] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-09-08 13:09] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-09-08 13:09] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-09-08 13:09] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2013-09-08 13:09] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-09-08 13:09] [PACMAN] reinstalled linux (3.10.10-1)
[2013-09-08 13:17] [PACMAN] Running 'pacman -Syu'
[2013-09-08 13:17] [PACMAN] synchronizing package lists
Last edited by jrussell (2013-09-08 12:02:10)Ok it seems that I would have no sound cards listed by aplay -l if I logged in from lightdm, If I logged in from a tty I would get sound cards listed from aplay -l.
I think lightdm 1:1.6.1-2 fixed my problem, everything works now, Id like to know why/how this happened if anyone knows? Thanks. -
S2110 tablet, "no SIM card found" and modem replacement...need tech help pls!!!
Hello!
I just found a way to recover Lenovo S2110/Vodafone Smart tab II 10 from bootloop.
Here's the guide:
http://forum.xda-developers.com/showthread.php?t=2603726
BUT coming from an original Vodafone firmware I've lost 3g with the "SIM card not found" error.
After checkign partitions details and finding that the /dev/block/mmcblk0p1 is the modem, I've got it extracted from the original Vodafone firmware and replaced on my system, but nothing...still can't find the SIM card!
Is there someone with deeper technical knowledge that can give me any advice and suggestion ?
Thank you in advance ;-)
Have a nice day !
*** nothing is impossible ***Actually I suspect the SIM card was not detected even before flashing the Lenovo firmware over the Vodafone one !
*** nothing is impossible *** -
yesterday my iphone was working and today it says there is no sim card, Why would this happen and does anybody know how I can fix this.
Thankyou in advanceit seems to have fixed itself after i turned the phone off and on several times
-
W510 - Win 7 Enterprise x64 -
On day, randomly, my sound card went missing. The windows speaker icon has an x over it, it claims no sound card installed.
The device manager has no record of conexant (though the nvidia HD Audio drivers are still there).
I have tried to install the conexant drivers through the lenovo support site, but get the error, "Driver Installation Failed: Could not find the MEDIA device for this driver."
I have updated BIOS, I installed the toolbox and did a system check, and I hvae rebooted many, many times doing little things here and there to try and diagnose this problem.
Its as if the actual hardware of the sound card does not exist to the operating system. No drops or major bumps occurred to the laptop.
Any ideas of what I could do next, presuming this can be fixed without getting warranty repair work done (which is a little out of my reach due to my location right now)?Try a ThinkVantage Toolbox diagnostic.
Alternatively, try a bootable Ubuntu LiveCD.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen -
ever since the 2.0 update my phone has mysteriously been popping this message up sometimes when i try to make call or send a sms message?? i can do a reboot and my service comes back but have had to do it about 4 times in last two days, anyone else have this problem and know of a solution??
Try popping the SIM out with a paperclip and making sure the contacts are clean. I get this sometimes too (though not often), and this is normally what I have to do. My SIM is getting worn out (there are drag tracks across the contacts).
-
Sound Card Found-Satelitte P50-Now I can record sound off the laptop.
Greetings,
Hopefully, this will save some people from going through what I went through.
When I tried to record music that was playing on the laptop with a sound recording program, it would record the audio through the webcam microphone. And it sounded terrible. Toshiba support had no idea how to fix it.
However, after many hours of poking around I discovered the fix. Go to the All Control Panel Items and click on the Sound. Then click on the Recording tab. Do a Right-Click and click on the Show Disabled Devices.
You will find Stereo Mix. Enable this device. Now when you run your sound recording program, you will have the choice of selecting the Stereo Mix and you will be able to record what you hear on your laptop.
Why Toshiba has this feature disabled is beyond me...but I hope this helps others.
GaryUnder
Creative SB brand - http://www.creative.com/products/welcome.asp?category=
Audigy 2 Zs VE (USB)
Audigy 2 NX (USB)
Li've! 24-bit External (USB)
Audigy 2 Zs Notebook (PCMCIA)
<i>(Digital Music LX (USB))
(Digital Music SX (USB))</i>
Creative E-MU brand - http://www.emu.com/products/category.asp?category=60
http://www.creative.com/products/welcome.asp?category=237
0202 USB
0404 USB
66/66M (PCMCIA)
other brands ... (too many to list)
http://www.musiciansfriend.com/rec?g=rec&s=computer
http://www.zzounds.com/cat--Audio-Interfaces--248
E-MU 0404 USB and 66/66M PCMCIA are quite good ones (and cheap ones too) but, as best ones you're asking are devices like RME FF800 and some MOTU and DigiDesign models, etc..
jutapaMessage Edited by jutapa on -2-20062:9 PM -
I bought a new Nokia Lumia 520 last week with a new SD card and when inserted the phone reads no SD card found.Can any one out there help me explain how to activate the 520 so it read or find the SD card .
Many thanks.
MaxwaraVarious suggestions HERE ..
.. also see THIS
Maybe you are looking for
-
Data not getting displayed in every page ...
Hi, I'm facing a peculiar problem. I have a template where i want to display a certain table in every page but i can't place it in header. As far as i know it should get displayed if I select "Repeat as header row at the top of each page". This table
-
How can i cut the audio from 1 file and put it on another?
I have these2 files of the same movie, 1 is amazing quality but theres no audio. the other is crummy quality but has perfect audio. How can I cut the audio from the good audio version and paste it onto the good video file? btw i have quicktime pro is
-
How do I correct Error U44M1P7 in order to update Photoshop CC?
I have been trying to update Photoshop CC, but the updates fail due to Error U44M1P7. How can I correct this situation in order to update?
-
My ipod touch 3rd wont show that its pluged in please help
my ipod touch 3rd will not show that it is pluged in on a computer or the wall charger but my other ipod touch works just fine in the computer and charger using the same wire,computer and charger
-
What happened to the ipod icon!?
I hate the new music icon in iOS5. I WANT THE OLD IPOD ICON BACK!