"No service 3G" displayed without any signal level displayed

I just upgraded to IOS 6 and after re-entering my APN info and restarting my iPad 2 my iPad 2 tried searching for a carrier the displayed:
"No Service 3G"without any signal level displayed.
The Carrier shows correctly in Settings-Carrier and my iPad 2 seems to be fully operational. Data flow (web browsing/e-mail/etc) on the 3G and Wi-Fi networks are good.
How do I get the carrier and signal level to display correctly?

That's kind of what i was wondering i live in Apartment Building as well top floor We have a Tower 2 miles to the North a Tower 1 mile or less to our South and 1 that's close to 2 miles to our West and is on Another apartment building and the Signal i'm getting is 3 to 4 bars and the 4G the bars indicate CDMA signal only why as the 4G is your Data.. Our apartment is maid out of Brick with Metal Windows the Roof is a Normal flat Roof with a High Grade Roof shingle..
You might Check and see what is in the Building Materials in your Apartment and if you Live in the bottom part of it that might Hamper the Signal somewhat..

Similar Messages

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV?

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV? I have a MiniDisplay Port to VGA adapter, but there are two issues with it: The new display doesn't have a VGA port, and even if it did, I wouldn't want to have my mac constantly attached to the display by a cable. I was looking for a way to use the TV as a display without any wires. Is there some type of bluetooth setup I could use? Please let me know if you have any suggestions.

As I wrote above, I think you should look into the Apple TV yourself. The best place to find information about what it can and can't do and to ask your own specific questions is probably in the Apple TV forum, here:
https://discussions.apple.com/community/appletv/appletv

OSB Service Call Out without soap envelope

Can we do a service call out without any soap envelope wrapped.
Example if my message is <Test>test</Test>
it should not wrap it like
<soapEnv:Body xmlns:soapEnv="http://schemas.xmlsoap.org/soap/envelope/"><Test>test</Test></soapEnv:Body>in request part of service call out.
My calling service is WSDL based proxy and called service is ANY XML Proxy Service

indeed, I have done my tests and it proved the same: whatever you post to a AnyXML service, OSB will first wrap it into a SOAP Envelope / Body and then pass it to the Message Flow.
After all it makes sense, the Interface of a Proxy Service has nothing to do with its Implementation....
a SOAP proxy service is implemented exactly like a AnyXML proxy service as far as the $body is concerned (maybe I have said an enormous BS!)
Only $operation would not be populated - I would expect. Correct me if I am wrong.

MBP is missing the "Display" icon in Sys Pref, Display PrefPane file needed

Hi,
I noticed that my "Display" icon under >Hardware, in the System Preferences is suddenly missing. It should be between "CDs & DVDs..." and "Energy Saver" icons. I think I need the Display Preferences Pane. Can anyone send me a copy, I don't have another Mac to copy it from (except a really old 10 yr imac running System 9). I don't know why it is missing, but I can't calibrate my display without it. The "display.prefpane" file is located under system>library>PreferencePanes. My email address is: melissa (at) melissatobiaart (Dot) com
If anyone can send me a copy I would greatly appreciate it!

The file is part of the OS X system therefore it's proprietary to Apple. Furthermore, it's a violation of the Apple Software License to install OS X on more than one CPU at a time (for a single-licensed copy. The Family Pack allows up to five concurrent installations.)
As the AD belongs to Apple it would be against the Terms of Use for us to enable any of the above. Thus, it's both inappropriate to ask as well as to send.
That's my interpretation of the software license. You may choose to interpret it differently or even ignore it, but such actions are best left off of the forums.
I would be more than happy to inquire of the moderators and report back what they suggest.

For PCI-4451,How to change the frequency of an output signal without any undefined state

I would like to generate a signal using output channels of PCI-4451 and at the same time capture data using the input channels. Is there any method that I can generate a continuous signal without any undefined state when the signal frequency is being changed?
Attachments:
Input_Signal.bmp ‏729 KB

Wee,
DSA boards such as the PCI-4451 have a number of very desirable properties including high precision and a high sampling rate. The trade-off for the combination of these two properties is that the DSA boards cannot adjust their sampling rate on-the-fly. Instead they have to be stopped and reconfigured. During this reconfiguration time, the value of the board's output becomes flat and level.
If you are looking to adjust the board's output without seeing these flat spots, you have to take a different approach to programming a DSA board. Instead of reconfiguring the board, what you need to do is allow the board to continue to run (at the same output frequency), and then overwrite the output buffer that the board reads to output values. This will
allow you to output new data without the flat spots. Below you will find an example that displays this behavior.
If you determine that this is not an acceptable workaround due to the limitations on output rates, you may want to look at using a Multifunction DAQ board (60xx or 62xx) or an arbitrary waveform generator (54xx) device instead.
Best of luck with your application.
Regards,
Jed R.
Applications Engineer
National Instruments
Attachments:
Cont_Gen_Voltage_Wfm-Int_Clk-With_Updates_for_DSA.llb ‏161 KB

I am trying to connect to my friend's wifi, i have a very strong signal indicated on my ipad, but cannot connect to the internet. Yesterday i connected without any problem, can anybody tell me why i cannot connect today?

i am trying to connect to my friend's wifi, i have a very strong signal indicated on my ipad, but cannot connect to the internet. Yesterday i connected without any problem, can anybody tell me why i cannot connect today?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Sound level variations without any command

Hello.
When using my iMac 24" 3,06 Ghz, the sound level always varies without any command.
It is very disturbing mostly because it is associated with the display of the sound level on the top of the screen.
Can you help me?
:-) Dominique

A little more background. I've now found that I can get my volume back by clicking the Device setting off of CoreAudio, and then selecting CoreAudio again. This lasts awhile then the sound drops out again. Also, I've tried different instruments in the EXPS 24, different Instrument/MIDI channels and still get the dropout prob. Even deleted the audio object in the environment and started over with a new one. All the other instruments in the track list are EXPS 24 and not affected

After 04 months of purchase of iphone 5 the lock button is too hard. At times its not working at all. The phone has been purchased in USA now I'm not getting service in India. After all whats the point in spending so much amount without any service.

After 04 months of purchase of iphone 5 the lock button is too hard. At times its not working at all. The phone has been purchased in USA now I'm not getting service in India. After all whats the point in spending so much amount without any service.

The warranty says that Apple may restrict service of an iPhone to the country of sale, and any reliable salesperson will tell you that if you tell them that you plan to use the iPhone in another country. Such service restrictions are common with cellphones and are by no means limited to Apple's phones.
Sorry, but if your iPhone requires service, you will need to send it to someone you know in the US who can get it serviced and then send it back to you.
Regards.

Using PowerMac G4 without any display

Hi!
I have PowerMac G4 867/QS whith 17" Apple Studio Display (ADC). It is very noisy, so It are sitting in my closet , and I manage them from my main iMac using ARD.
Can I disconnect Apple Studio Display and run PowerMac without any display?
Thanx!

I'm trying restart the PowerMac (monitor is disconnected) from ARD , but it shuts down! Then I press the Power button, PowerMac start up and ARD restore the connection, but the ARD Desktop window is now no more than 800x600 !
mage: !http://grab.by/Vd7!
In fact, I could then set my screen resolution:
!http://grab.by/VdF!
Is it possible to restart a PowerMac without a display via ARD and preserve the high resolution screen?
Perhaps there is an emulator display (plug in to DVI or VGA output).
Thanx!

Stop sending signal to external display without unplugging the cable

Stupid question: if I toggle through the display settings (F7), it doesn't seem as if any go to shutting off the external display (like maybe I want to make a change I don't want my audience to see, I would like to shut it off without unplugging, then turn it back on when I'm done). Did I just not toggle through enough? Or is there a different mechanism to accomplish this?
(I also looked in System Preferences --> Display, but see no command for shutting off the external display once it is connected/detected.)
Thanks!

Hi, Phlaug. There is no such setting. But if you use Extended Desktop mode instead of Display Mirroring mode, nothing that appears on your MBP's screen needs to appear on the external display (or projector) that your audience is seeing.
Instructions from Mac Help, under the Help menu:
*Setting up multiple displays as an extended desktop*
If your computer is connected to more than one display or to a TV or projector, you can set them up as a continuous display for your desktop.
To set up multiple displays as an extended desktop:
Connect the displays to your computer.
Connecting multiple displays or a projector
Open System Preferences, click Displays, and then click Arrangement.
Open the Display arrangement pane of Displays preferences
Follow the onscreen instructions.
You can also show the same image on all the displays connected to your computer. This is called “video mirroring.”
Setting up multiple displays to show the same image
If your computer is connected to more than two displays, you can specify that some are mirrored displays and others show the extended desktop. For example, if you have three displays, you can have two displays showing the same information and the third display showing the extended desktop. To set up a combination of displays showing mirrored and extended desktop images, set up the three displays as an extended desktop, and then Option-drag a display icon onto another display icon to mirror the two displays.
If you are playing a DVD on a television connected to your computer, click the Arrangement button in Displays preferences and move the menu bar to the television. If you don’t see an Arrangement button, your computer is only capable of mirroring (showing the same image on all screens). For more information, see the manual that came with your computer.

Web service hangs without any errors and exceptions

hi all,
We have a ejb application web service that is binded with shedular bc to trigger for every 2 hours
and it runs for one and half hours making continous transactions with database..
In the web service a outer for loop will be iterated by fetching list of data from database. And this list will be iterated in the inner for loop.
This logic works fine for sometime, but suddenly after some random period of time without any errors and exceptions the outer for loop gets no list from database
and the inner for loop is never executed and the web service completes processing.
This i can able to see form my log files.
i dont understand why the list is not fetched from the database, is the problem with hibernate or it lost the connection with database,
either case it has to throw exception but the service is not.
otherwise does this is garbage collector issue.
Thanks in advance,
Bye

Without any code to see what's going on we'd be flying blind trying to answer this one.

I'm in syria and they blocked me from using any VPN service please help without VPN i can't open the store help please ( using iphone 5 version 9.1.4 )

I'm in syria and they blocked me from using any VPN service please help without VPN i can't open the store help please ( using iphone 5 version 9.1.4 )

There is nothing that anyone here on a user forum can do to help you. If it is a local issue in Syria, then you need to take it up with your phone company or authorities there who have prevented you from using VPN.
Nobody here can help you.

SCEP Service started without any malware protection engine; AV signatures out of date; AS signatures out of date

Our new pooled VDI collection reports the following errors in SCCM 2012 R2 regarding SCEP:
Service started without any malware protection engine; AV signatures out of date; AS signatures out of date
The Windows Update service is disabled and it is by design when we create a new collection, althought the service is enabled on the master template.
SCEP is not up-to-date, real-time protection is off, and this is causing us compliances issues.
Any ideas?

Hi,
How do you set the SCEP to get definition updates?
The following blog might help.
http://gerryhampsoncm.blogspot.com/2013/08/config-mgr-2012-endpoint-protection_4240.html
(Note: Microsoft provides third-party contact information to help you find technical support. This contact
information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Why won't my Intel iMac boot up, either from the internal hard drive or the DVD drive? It just displays a light grey screen, without any other icons, etc. The fact that it won't boot from the original system DVD is what baffles me the most. Any ideas?

Why won't my Intel iMac boot up, either from the internal hard drive or the DVD drive? It just displays a light grey screen, without any other icons, etc. The fact that it won't boot from the original system DVD is what baffles me the most. Any ideas? It uses the latest version of Mavericks. Thanks!

If the C key for Install Disc or R Command for OS X Recovery startup commands are not working, try holding the Option key for the Startup Manager.
see > Startup Manager: How to select a startup volume
If that does not work and you using a wireless keyboard, it may have become unpaired and you need to dig up a USB keyboard to invoke the startup commands.
For more on gray screen, see > Mac OS X: Gray screen appears during startup

Is there any way to display JTree without using applet

Hi,
is there any way to display JTree without using applet . Can we display the JTree in a JSP page.
With Regards,
Sheema.

Not a JTree, per se. But there are Javascript solutions out there and there are JSP tag library solutions which use a JTree on the server side to hold and maintain the data and expanded nodes.
This is one that I've used before, it's pretty good:
http://www.jenkov.dk/treetag/introduction.tmpl

"No service 3G" displayed without any signal level displayed

Similar Messages

Maybe you are looking for