No service after porting

Hi Folks,
I ported my number from Sprint to Verizon, but now I don't have service (I have reception, but am unable to make calls or send/receive texts). I've already received the text message stating the port is complete, and checking the port status on the Verizon website confirms this.
I've tried power toggling the phone, doing a hard reset, leaving it off for a while, turning it on for a while, connecting to wifi, removing and replacing the SIM card, and contacting support via live chat. They were unable to help with the issue, and suggest I call to speak to someone higher up (but I can't make calls!).
Does anyone have any idea of something else I could try? If all else fails, I will contact them as soon as possible with another phone. I'm just trying to get my service back as quickly as possible.

I don't know what type of device you are using so no one can troubleshoot the issue.
Are you a prepaid or postpaid customer?
You have not given much information.
Transfer Your Phone Number - Switch to Verizon Wireless
Verizon Mobile Support
Good Luck

Similar Messages

"Cricket Number is No Longer In Service" After porting my number 2 years ago?

I upgraded to the LG G3 last Friday and when my grandma and my employer try to call my phone it is saying, "This Cricket number is no longer in service." I have had 3 different SIM cards and I stupidly dropped my new LG G3 and had to order a replacement, which arrived today (9/27). So I have had 2 different phone as well. I ported my Cricket number over to Verizon over 2 years ago!!!!! I have been to the store several times, and have contacted technical support along with other various Verizon numbers to no avail. Everyone has no idea what is going on and it has been bumped to the highest level of customer support. The Verizon techs keep asking me if anyone else has trouble calling me but how would I know if the number is coming up "No longer in service?" Has anyone experienced this problem before? I have no trouble sending calls to the aforementioned numbers and have never had this issue in the past!!

Cantphaseme
This may be a ridiculous question, but do your employer and grandmother use Cricket?

How to run Indesign CS3 as a Service with Port number

Hello all,
I would like to run the InDesign CS3 Server as a service on Windows. It seems that after installing the Server it automatically installs as a service. But where can I assign the port number. If under Services properties of InDesign Server under Parameters I mention -port 1050 on Ok button it removes the parameter information.
I am doing right or is there some other way to start the Server as Service with Port number.
Thank you all in advance.
Regards
Farzana.

Hi Sascha,
have you tried to remove the service and install it manually?
\"Path to IDS"\InDesignServerService /install /u
\"Path to IDS"\InDesignServerService /install
I guess you've tried to start the instance in the console already (successfully?).
Regards
Ingo
Am 05.07.2011 um 12:18 schrieb 1000grad_Sascha:
Hi Ingo,
I've installed the Snap-In and configured one instance. Maybe it's worth mentioning that there are some instances running at the same time, which have been started using the console. Hope that's not interfering. However, the MMC-configured instance uses a different port.
I tried to start the service with a huge range of users having all imaginable privileges. The common way of using either "LocalService" or the Local System Account (which has admin rights for me) doesn't do the job.
cheers,
Sascha
>

Help:Invoke web service after receiving a user task response

Hi, All:
We encountered a problem while developing user task. The detail is as follows:
We need to invoke a web service after a user task's response, that is to say, the web service needs some data from the response of the user task.
Take the loan flow tuturial as a example, what we need to do is to invoke a web service after the BPEL process get the start loan APR. the web service needs the APR for its input message. how can I handle this situation?
Thank you very much for your help!

Thanks for your immediate response Jan Vervecken.
I have created the Data Control from web Service proxy and I am able to recieve the output from the web Service.
But, Currently I am invoking the webservice process method by a command button which populates my SelectOneChoice.
My requirement is to invoke the web service 'process' method by value change event in the SelectOnechoice control.
So, Can you pls. let me know how do I bind the web Service method 'process' to value change event of SelectOnechoice control?
Thanks and Regards,
Sandeep T

Iphone 4 without service after IOS 5.1

I am without service after IOS 5.1. Since the upgrade, my phone can't make or receive any call. I bought it from my mobile operator (Claro Brasil) itself. The odd thing is that when I use the SIM of my brother (from another provider - TIM) the phone works perfectly. Please, can someone give me any advice. I called to Claro and they said everything is fine with my network and that they will open a procedure to see what can be done. I think they don't know what is happening and I can't wait much longer.
Thank you in advance.
Luis
Brazil

Yes, I tried to restore it as new. Actually, 2 times, with and without backup. Today I will try to get a new SIM. Hopefully, that will solve my problem, but I am a bit skeptical as my SIM was working ok before the update.
Thank you very much for your help.

HT201394 Loss of cellular service after updating to iOS 8.0.2 on iPhone 5s

Loss of cellular service after updating to iOS 8.0.2 on iPhone 5s

Hello there, Lonlybird2009.
The following Knowledge Base article offers up some practical steps for troubleshooting cellular connection issues on your iOS device:
iPhone cellular data connection issues
http://support.apple.com/kb/ts3780
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Issue while playing the content of Azure Media Services after deleting the channel.

Hi,
We are having the issue while playing the content of Azure Media Services after deleting the channel.
Please find detail scenarios below:
We have done live streaming of an event using Azure Media Services, event was around 5-6 hrs. After completion of event channel was deleted, when we checked content data
it was only 1hr. Content has only last 1 hr. recording, we are unable to get full recoding.
We divided event into two parts to avoid above issue. After completion of 1st part which was of 2 hrs., we stopped the streaming and deleted the channel. New channel was
created and streaming was started for 2<sup>nd</sup> part, after completion of event channel was deleted. Now we are unable to play the content data for 1st part but able to play the 2nd part of event through content publish URL.
We have done streaming of 3 hrs. event on 18th April with same process and full recoding was available.
Can you let me know what might be the issue?

Hi,
Please refer to Justin’s blog and see if it helps:
http://www.justinkobel.com/post/2012/04/30/SharePoint-2010-Claims%E2%80%93Operation-is-not-valid-due-to-the-current-state-of-the-object.aspx
As suggested by Alex, please provide more information about your process of changing password.
Here is an article for updating passwords on SharePoint 2010:
http://blogs.technet.com/b/seanearp/archive/2011/01/25/updating-passwords-on-sharepoint-2010.aspx
Regards,
Rebecca Tu
TechNet Community Support

Have to restart VPN service after restarting macmini

Hello,
i am using a mid2011 macmini with Lion Server (10.7.2-Build 11C74) loaded over the Appstore, connected to an Airport Extreme (FW 7.6). I configured the VPN service in the Server settings and forwarded the profile to the clients. VPN connection works just fine.
When i restart the macmini none of the clients are able to connect with the VPN Service. Other services are running without any problems (screensharing, filesharing,...), but i cannot connect with the VPN service through any client.
After i restart the VPN Service (switch off and back on) in the Server App on the macmini it works again.
Is anyone experiencing similar behaviour with the VPN service after a restart of the server? Has anyone suggestions how to get the VPN service working even after a restart without switching it off and on again?
If you need further information please reply, i will hand it in immediately.
FYI:
I did make a complete clean install of the Server, without import of the timemachine backup to ensure the system is "clean".
kind regards
Marko

Hello,
i am using a mid2011 macmini with Lion Server (10.7.2-Build 11C74) loaded over the Appstore, connected to an Airport Extreme (FW 7.6). I configured the VPN service in the Server settings and forwarded the profile to the clients. VPN connection works just fine.
When i restart the macmini none of the clients are able to connect with the VPN Service. Other services are running without any problems (screensharing, filesharing,...), but i cannot connect with the VPN service through any client.
After i restart the VPN Service (switch off and back on) in the Server App on the macmini it works again.
Is anyone experiencing similar behaviour with the VPN service after a restart of the server? Has anyone suggestions how to get the VPN service working even after a restart without switching it off and on again?
If you need further information please reply, i will hand it in immediately.
FYI:
I did make a complete clean install of the Server, without import of the timemachine backup to ensure the system is "clean".
kind regards
Marko

Restart Systemd service after laptop resume

Hi!
After resume my laptop (from suspend, I've no tried hibernation) I need to restart NetworkManager service. How can I do this automaticaly?, I've searched in google and Systemd documentation but I have not a clear idea about how to do it.
thanks

Gazpacho wrote:
lucke wrote:As boast said, you can make pm-utils run "systemctl restart networkmanager.service" after resume for you. https://wiki.archlinux.org/index.php/Pm … _own_hooks
Sorry (to boast too), you are right. I've read the wiki and created a hook, now NM restarts after resume. Thanks!
And now I've discovered that my computer only suspends the first time. Second time nothing happens when I close the tap, execute pm-suspend or the KDE menu option suspend to ram
If you have any idea it is welcome. If not I will mark the thread as solved in a couple of days and search in forums and wiki.
this usually happens when your hook doesn't exit. pm-suspend never finishes because it's waiting for the hook to exit and the second pm-suspend will block until the other pm-suspend is finished. Please post your hook.

Automatically start SQL Agent service after SQL Server service fails and starts.

Hi!
I have SQL Server 2008 R2 with two main services - SQL Server and SQL Agent.
I'll try to describe my situation. It happens very occasionally, but sometimes SQL Server service terminates unexpectedly. It's my log:
09/13/2013 10:46:21,Service Control Manager,Error,The SQL Server (MSSQLSERVER) service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 120000 milliseconds: Restart the service.
09/13/2013 10:46:21,,Error,[359] The local host server is not running,,,,
09/13/2013 10:46:22,MSSQLSERVER,Error,The MSSQLSERVER service terminated unexpectedly.,Server,1073760843,,
09/13/2013 10:46:22,,Warning,[139] AutoRestart: Attempting to restart the MSSQLSERVER service (attempt #1)...,,,,
09/13/2013 10:46:27,,Warning,[139] AutoRestart: Attempting to restart the MSSQLSERVER service (attempt #2)...,,,,
09/13/2013 10:46:32,,Warning,[139] AutoRestart: Attempting to restart the MSSQLSERVER service (attempt #3)...,,,,
09/13/2013 10:46:32,,Error,[140] AutoRestart: The MSSQLSERVER service could not be restarted after 3 attempts,,,,
09/13/2013 10:46:32,,Warning,[360] SQLServerAgent initiating shutdown following MSSQLSERVER shutdown,,,,
As you can see, SQL Server service terminates unexpectedly. Then SQL Agent service tries to start SQL Server service. After unsuccessfully attempts to start SQL Server service, SQL Agent service stops itself. I have the option setting in SQL Server
service to start itself after unexpectedly stop within 2 minutes and it is works well. But I have to start my SQL Agent service after this manually. Unfortunately, I can't investigate the reason of my SQL Server stops unexpectedly and in this case I just want
to make the settings to start both of my services SQL Server and SQL Agent automatically after this. How can I set up this? How can I make my SQL Agent service starts after SQL Server service?

Hello,
SQL server agent service depends on SQL server service so unless SQL server service comes online agent will not come online so agent is depended on SQL server not the other wise.
Now is your server 2008 R2 patched to latest service pack (SP2).If not please upgrade it to latest SP.Some fixes are there in Sp which will subside this issue.Can you paste output of
select @@version
>>Then SQL Agent service tries to start SQL Server service.No this is not the case
>>Unfortunately, I can't investigate the reason of my SQL Server stops unexpectedly
Did you checked sql server errorlog and windows event log completely.Please do so and paste if you find some more info
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

HT4623 I can't activate Location Services after installing ios& on Iphone 5.... any ideas?

I can't activate Location Services after installing ios& on Iphone 5.... any ideas?

I had the same issue with one of the three iPhones I updated on Wednesday. There are many processes that are working for people including:
- Resetting the device several times
- Toggling the "Dont' Allow Changes" setting under "Restrictions --> Location Services"
- Disabling Restrictions altogether.
- Restoring from backup
I was able to restore location services by selecting "Reset" and choosing "Erase All Content and Settings" to set the phone up as new. When the phone resets and goes through the setup process, I was given the option to turn on location services. I then restored from backup and was good to go.
Some people have been able to resolve the issue by resetting but only using "Reset All Settings" without having to erase all content, but that did not work for me. It took a while to get everything back to normal, but it is good to know that there was a somewhat simple solution.

I am using Apple iphone 3gs and having a problem of no services after inserting sim card

I am using Apple iphone 3gs and having a problem of no services after inserting sim card, how to resolve it?

Follow this article below it will tell you step by step what to do.
http://support.apple.com/kb/ts4429
If you're still experiencing No Service, contact your carrier to check for any network or account issues that could cause these problem.

I am unable to see following SQL Server Analysis Services in central admin services after the SQL 2014 power pivot installations

I am unable to see following SQL Server Analysis Services in central admin services after the SQL 2014 power pivot installations
Ravi

Hi Ravi,
Per my knowledge, there is no Analysis Service in SharePoint.
After running the SQL 2014 setup to install PowerPivot for SharePoint, you need to open the PowerPivot for SharePoint 2013 Configuration tool in Central Admin Server and configure PowerPivot for SharePoint.
After that, you will see new Service Application called "Default PowerPivot Service Application" in Central Administration.
If you have other WFE servers, then you need to install the PowerPivot Add-In on all the other servers in the SharePoint farm.
More references:
http://sridharbabuk.blogspot.jp/2013/02/installing-configuring-analysis-service.html
http://msdn.microsoft.com/en-us/library/jj219067.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Setting the Tools Service ssl port

Following this document (link below), and in the section in which they talk about changing the tools service ssl port. It says you want to change it in two places, but only describes how to do that in one of them. The change to server.xml is explained, but not the change to webstudio.properties
Why do I need an ssl port? Do I need this change?
I can't use the default port(s) because I am sharing a server and don't want to worry about some one else taking the port. (I will also look into redefining localhost as that is the best solution for that problem.)
Link - http://www.google.com/url?sa=t&rct=j&q=oracle%20endeca%20installation%20guide%20for%20commerce%20tools%20and%20frameworks&source=web&cd=1&ved=0CEcQFjAA&url=http%3A%2F%2Fdocs.oracle.com%2Fcd%2FE35827_01%2FToolsAndFrameworks.310%2Fpdf%2FTFInstallGuide.pdf&ei=8iEcUL7mOMfc2AW2m4DIDA&usg=AFQjCNFTr5LrZa0wnHjMTsI70tgUyhZDsw
Edited by: EndecaJoe on Aug 3, 2012 3:18 PM

This forum is for Endeca Information Discovery questions. Your question is related to Endeca Commerce, please repost your request in the following forum: Technical Questions
Thanks,
Ryan

Iphone keeps dipslaying no service after i updated it to ios5

iphone keeps dipslaying no service after i updated it to ios5

I may have found a solution! First, if you are having these problems, check the build of your iOS version. Go to Settings>General>About>Version. This should read 5.0.1 (9A405).
Upon closer inspection of search engines, I came accross a website titled "What is the difference between iOS 5.0.1 build 9A405 and 9A406?". As it transpires, there's a great deal of difference, for us 4S users anyway.
Here's the website (I hope I'm not breaking any rules by posting a link. Please let me know if I am!):
http://www.iphonefaq.org/archives/971716
The difference between these builds seems to be a fix for a problem in the iPhone 4S not recognising SIM cards. Apple's own knowledge base article states the following;
"In certain situations, iPhone 4S may have difficulty recognizing a micro-SIM card, resulting in the following behaviors:
"Invalid SIM" or "No SIM Card installed" alert appears intermittently.
Status bar displays "No Service" or "Searching" in a location with good network coverage."
Apparently, because this is a small fix for a small number of users, the fix has not been released as iOS 5.0.2. Therefore, people who updated to 5.0.1 early, such as myself, can't simply update by checking on iTunes or Software Update. In order to receive this newer build we have to restore the phone to factory settings, confirm the build has been updated to 9A406, then restore from a backup.
I haven't attempted this yet as it may take some time, and I don't have enough until later in the week, but it anyone else tries this beforehand and finds it works, please let us know!

No service after porting

Similar Messages

Maybe you are looking for