No service and call fail error

please solve this asvp

Update: After about an hour, the 3GS finally changed to zero bars.
My guess is, ATT was having intermittent problems with the signal and the 3GS stayed at 4 bars while the iphone 4 dropped into and out of "No Service".
This morning (next day) they are both getting 4 bars. We'll see...

Similar Messages

  • The Remote Procedure call failed error in Microsoft Direct Access configuration

    Hi,
    I have setup the Microsoft Base lab using Microsoft TLG, I have generated the IPHTTPS and NLS server certificate using the Microsoft PKI. After that I have installed the Microsoft Direct Access role but at the time of configuring the Remote Access Server
    it fails with the remote procedure call failed error.
    Could anybody help me to resolve this issue. I have searched a lot but no any solution found. It will be very helpful, if some one can point me where I did mistake.
    Thanks,
    Arif

    sql server services give error the remote procedure call failed [0x800706be] in sql server 2008.
    To resolve this issue, I executed the following mofcomp command in command prompt to re-register the *.mof files:
    mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof".
    but it does not work.
    Plz give the exact soln to solve this error.
    So when you tried starting SQL server service it gave the error right  ?  or when you click on SQL server services in SQL server configuration manager(SSCM) you get this error. Can you be more clear.  As far as I read your question it has something
    to do with permission. Close SSCM window and this time  right click on SQL server configuration manager and select run as administrator and check if you can see SQL server services
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Articles

  • Random Net connection call failed errors

    Hi All,
    I've built a Flex application which is calling coldfusion CFC through remote objects in order to retrieve data.
    2 days ago, I've updated the server with coldfusion 9 and my issue is that I have sometime those kind of error messages :
    [RPC Fault faultString="error" faultCode="Channel.Call.Failed" faultDetail="NetConnection.Call.Failed: HTTP: Failed"]
    [RPC Fault faultString="error" faultCode="Channel.Call.Failed" faultDetail="NetConnection.Call.Failed: HTTP: Status 503"]
    [RPC Fault faultString="error" faultCode="Channel.Call.Failed" faultDetail="NetConnection.Call.Failed: HTTP: Status 500"]
    [RPC Fault faultString="error" faultCode="Channel.Call.Failed" faultDetail="NetConnection.Call.Failed: HTTP: Status 504"]
    [RPC Fault faultString="Send failed" faultCode="Client.Error.MessageSend" faultDetail="Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Failed: url: 'http://servername/flex2gateway/'"]
    It was also happening on Coldfusion 8 and even on one other sever with another application.
    (but same logic  Flex -> remote Objects -> CFC -> sql2005).
    When we were still running CF8 I added this <add-no-cache-headers>false</add-no-cache-headers> to the service-config.xml file but with no success.
    I do not know if it's related to this but I also sometimes have this error message :
    [RPC Fault faultString="Channel disconnected" faultCode="Client.Error.DeliveryInDoubt" faultDetail="Channel disconnected before an acknowledgement was received"]
    Most if time the application is running fine, but I want to avoid this errors.
    For example yesterday I recieved +- 50 times the NetConnection.Call.Failed error and 20 times Channel disconnected error.
    Do not hesitate to ask if I need to post CF9 settings summary or something else.
    Thank you for your help.
    Aubry

    That's a pity, but thanks for the reply.
    Dik

  • Sony BRAVIA Call failed error message

    I'm trying to use Skype on a Sony BRAVIA TV and with the CMU-BR100 camera installed. I cannot make a video or telephone call to another skype user. I get call failed error message for both video and telephone. Do I need to buy Skype credits to be able to use Skype ??

    Shorty wrote:
    Can anyone experiencing the 'call failed' issue comment on whether the problem occurs 100% of the time, or is it always within the first 10 minutes after powering on the TV?
    Sorry.... Maybe I'm a bit thick, but do you mean 1/ switch the TV on and try Skype after 10 minutes? Or 2/ Try Skype within the 10 minutes? I'm happy to help with research if I can, even though I don't even switch this TV on anymore!
    My issue is constant. I.E. I turn the power off at the socket, wait at least 10 seconds, turn on, start the TV and make a Skype call. That works..... ONCE. If I try to call a second contact, it gives the "call failed" message, without even waiting for any type of connection, or pausing for any timeout. If anyone tries to contact me, they get a "busy" message.
    To be honest, I've not tried leaving the TV on for a while before trying. If I've nothing better to do over the next few days, I'll try that. I'm not that interested in it anymore. In fact... I don't like to see that TV in my living room and don't even use it!
    Skype on my phone works better, with better video and sound quality. That's where I'm at.....
    Maybe I'm on a downer tonight...

  • Call failed error

    Recently my phone stopped being able to make toll free 800 calls, local and long distance work fine but when I tried to call my bank and other companies 800 numbers I get a call failed error , not sure if it is my phone scewing up or what but I used to be able to call toll free numbers and all of a sudden was not able to anymore. Any suggestions or tips

    Hi and Welcome to the Forums!
    Anytime random strange behaviors creep in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Best!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • "Call Failed" error outside of home area code

    I have an iPhone 5 on verizon wireless running IOS 6.1, and everytime I make a call outside of my home area code I get the 'call failed" error.  I have Dial Assist turned on.  I get the same message with Dial Assist turned off.  I am syncing to my corporate Exchange directory if that makes any difference
    Anyone else run into this before?

    hi
    check this links
    http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
    also check Tcode: SLDAPICUST.
    run tcode SLDCHECK? any error?
    Thanks
    Rodrigo
    PS: If useful reward points

  • "Call Fail" error when trying to make out calls.

    Hi, I'm on iPhone 4S with iOS 6.1.3 . Recently I've been experiencing this problem of doing  outgoing calls. It keeps on having this "CALL FAILED" error. Previously it sometimes came but went back normal after an hour and I thought It might be caused by my network carrier . But its been 4 days now. Do take note that Im still be able to receive all incoming calls, SMS, Apps Messaging as well internet surfing &amp; others. Pls guys help me to resolve this issue. Tq.
    P/S
    My location = Malaysia
    My ISP &amp; cellular network carrier = Celcom

    Hello zipinabag,
    Thank you for all the information you provided regarding the issue you are experiencing when making a call on the iPhone. I recommend reviewing this tutorial:
    Calls and connection issues
    http://www.apple.com/support/iphone/assistant/calls/
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • No service/searching/call fails

    Have a 4s -was working fine. But now constantly searching for service or 1-2 dots and calls fail. Have done network reset. Wi-fi fine. Wifes phone has 3-4 dots of service in same location

    On talking with tech in Ky he  suggested cleaning my sim card with pencil eraser which made no difference. On further search on his part he noted that the issue was a tower which I was locked into. The tower was malfunctioning and when repaired my service returned to normal. 

  • Lync user calls a Skype user and call fails

    Dear Expert,
    Please help to confirm the message below about Lync user and Skype, is it correct or not?
    3) Lync user calls a Skype user and call fails
    This is an issue that will be fixed in the next service update. Try calling again.
    http://www.supertintin.com/blog/record-skype-calls/troubleshoot-skype-lync-connectivity
    Thank you

    No, it isn't correct info. Because integration between skype and Lync work successfully in call and IM
    Also you can refer below link
    http://blogs.technet.com/b/lync/archive/2013/05/23/lync-skype-connectivity-available-today.aspx
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical | Twitter:
    Mai Ali

  • Dropped calls and "Call failed" on edge

    My experience has been the opposite from others on the forum with the new 2.0.2 software. I can get 3G in town and I can place and receive calls just fine. At home, I only have an edge connection with usually 2-3 bars. 9 out of 10 calls I try to make from home fail. I get the three beeps and "Call failed" message on the screen. Usually it is a split second after I hit the call button. It's not even trying to make the call. I have restored it, restarted, etc. and it still happens! I cannot make a phone call at all. This is my business phone, and it is affecting my response to clients. Anyone have any suggestions? I will probably go to the genius bar tomorrow, but if I don't have to go through the hassle, I won't.

    tigerarch,
    Does this happen in all locations, or just your home?
    What does the AT&T coverage map show for your home?
    I live in a moderate area, and AT&T's disclaimer on the coverage map says that Good and Moderate may not have in building coverage. Not only does my iPhone sometimes not pick up a signal or complete calls, the same applies to other AT&T phones there.
    My home is also made of stucco, which along with brick and cement block, is one of the worst materials for blocking signals.
    If this only happens in one location, I would recommend contact AT&T and see if they will open a ticket. The probably won't open a ticket if your coverage is listed as "Moderate"
    Hope this helps,
    Nathan C.

  • RFC call failed : Error when opening an RFC connection

    Hi,
    As a result of "Start Data Collection" operation in the t-code RZ70, I have got this error.
    "RFC call failed : Error when opening an RFC connection"
    Others things are with success message.
    Regards,
    Bala Raja

    hi
    check this links
    http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
    also check Tcode: SLDAPICUST.
    run tcode SLDCHECK? any error?
    Thanks
    Rodrigo
    PS: If useful reward points

  • After the upgrade to 10.10.3 Foto doesn't run and call the error of the plugin PhotoFoundation

    after the upgrade to 10.10.3 Foto doesn't run and call the error of the plugin PhotoFoundation

    Try opening iTunes while holding down the option key. When you get a dialog box with "create a new library" or "choose a library", select the choose option and navigate to the library on your external HD.
    BTW: If your external HD is not powered on and mounted before opening itunes, iTunes will create a new blank library.

  • I've bought an Iphone 4S in the UK. Using the phone in Argentina, it displays the "No Service" and "Invalid SIM" errors sporadically. The only solution is to reset the phone (switching it ON/OFF). Any suggestions?

    I've bought an Iphone 4S in the UK. Using the phone in Argentina, it displays the "No Service" and "Invalid SIM" errors sporadically. The only solution is to reset the phone (switching it ON/OFF). Also most of the time, the SMS are not sent nor received...
    The phone was checked by my carrier (phone company, Movistar) and they replaced the micro SIM card. bear in mind that there's no Apple shop here and the Iphone 4S is NOT available in Argentina!!!
    Any suggestions?

    Dear all,
    (THIS CONCERNS MTC TOUCH CUSTOMERS IN LEBANON)
    I've received an email with a solution to the problem; you have to update to the new iOS 5.0.1 firmware (9A406)!! It's been 1Hour and so far my iPHone 4S is working just fine. Please follow carefully the below instructions:
    RUN A FULL BACK UP BEFORE DOING ANY OF THIS
    1. Download the new iOS 5.0.1 firmware (9A406) from the internet. (800MB)
    2. Connect your iPhone 4S to iTunes.
    3. Once connected, two options will show: ‘restore’ and ‘check for update’.
    4. Press down SHIFT and choose ‘check for update’. (if you click ‘check for update’ without pressing down SHIFT doesn’t work.)
    5. Select the new firmware (9A406). Note that the file should be renamed ‘iPhone4,1_5.0.1_9A406_Restore.ipsw’  (instead of ‘iPhone4,1_5.0.1_9A406_Restore.zip’), i.e. changing the file extension from ZIP to IPSW. iTunes will now work alone and update your iPhone 4S.
    A full back up is recommended before firmware upgrade.
    HOPE THIS HELPS

  • [Solved] Systemd user service and timer dbus error

    I have installed arch recently and added a few of my own services, for example the acpi_call commands and such. Now I want to create a systemd service that runs every 5 minutes and execute a script.
    I searched a lot and I found that I must use timers. I got the thing with the timers working, but because my script has to do with a specific user, I want it to run only every 5 minutes when i am logged in as that user.
    I tried to put the files in /etc/systemd/users, .config/local/users and all the possibilities but everytime i want to enable it, it says dbus connection refused.
    Can somebody please provide me a way to execute a systemd service every 5 minutes while I am logged in as a specific user?
    I did follow the wiki and created a dbus service and all. Everything works on that side but i can't enable my user service.
    thanks!
    Last edited by nopemopes (2015-03-25 11:10:06)

    jasonwryan wrote:
    What errors are you getting? https://bbs.archlinux.org/viewtopic.php?id=57855
    Not a Sysadmin issue, moving to NC...
    sorry, didn't mean to be incomplete.
    The error says "Failed to get D-Bus connection: Connection refused".
    I did what the wiki said: Create the dbus files, enable them and such.
    No i put my service files + timer in the places mentioned by the wiki but everytime i try to enable them, that error shows up.
    systemctl status dbus gives me all good
    dbus.service - D-Bus System Message Bus
    Loaded: loaded (/usr/lib/systemd/system/dbus.service; static; vendor preset: disabled)
    Active: active (running) since ma 2015-03-23 19:39:24 CET; 1h 18min ago
    Docs: man:dbus-daemon(1)
    Main PID: 246 (dbus-daemon)
    CGroup: /system.slice/dbus.service
    └─246 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation
    mrt 23 19:39:34 Jordy-Laptop dbus[246]: [system] Activating via systemd: service name='org.freedesktop.ModemManager1' unit='...ervice'
    mrt 23 19:39:34 Jordy-Laptop dbus[246]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.ModemManager1....ectory.
    mrt 23 19:39:34 Jordy-Laptop dbus[246]: [system] Activating via systemd: service name='org.freedesktop.ModemManager1' unit='...ervice'
    mrt 23 19:39:34 Jordy-Laptop dbus[246]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.ModemManager1....ectory.
    mrt 23 19:39:39 Jordy-Laptop dbus[246]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='...ervice'
    mrt 23 19:39:39 Jordy-Laptop dbus[246]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
    mrt 23 19:47:01 Jordy-Laptop dbus[246]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='...ervice'
    mrt 23 19:47:01 Jordy-Laptop dbus[246]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
    mrt 23 20:51:38 Jordy-Laptop dbus[246]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='...ervice'
    mrt 23 20:51:38 Jordy-Laptop dbus[246]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
    that's the log for dbus and these are my files:
    drive_sync.service
    [Unit]
    Description=Drive sync
    [Service]
    Type=simple
    ExecStart=drive_script.sh
    drive_sync.timer
    [Unit]
    Description=Drive sync
    [Service]
    Type=simple
    ExecStart=drive_script.sh
    these files are located in ~/.config/systemd/user
    Last edited by nopemopes (2015-03-23 20:00:55)

  • VOIP call Failed (Error Code 15) in Prime Event log.

    I'm seeing the following events in Prime Infrastructure related to Cisco 7925 phones.
    VOIP Call Failed for "(Error Code 15) occurred on client "xx:xx:xx:xx:xx:xx' which was associated to AP <APName> on interface 802.11b/g.
    I can't seem to find where this error code 15 is defined.  The closest I was able to find was error code 15 under gatekeeper codes in the following document which may or may not be relavent.
    http://www.cisco.com/en/US/docs/ios/voice/monitor/configuration/guide/vt_voip_err_cds_ps6350_TSD_Products_Configuration_Guide_Chapter.html
    Any insight into this would be appreciated.
    Jake
    P.S. No voip call jokes on 802.11b/g please

    It had 18Mbps set as the min phy rate.  I also think it has to do with CAC issues at 18Mbps that are pretty well noted and differeing mandatory rates across the 802.11b/g/n and 802.11a/n networks on the controller.  When the phone would roam onto a radio with 18Mbps was the min mandatory rate, it would drop and give this error.

Maybe you are looking for