No service for 13 hours now.. How can I fix??

Yesterday there was a bad storm that came through for an hour max. A user on the same plan has an iPhone 5 as well. Her service is perfectly fine. I've restarted my phone, but the problem is consistent. I can't make any calls what so ever. How can I fix this???

On the same plan or on the same cellular carrier? One is not the same as the other
Hold down the on/off button on top right and the large app button on bottom middle at the same time. Wait for the little white Apple logo to appear on the screen, release both buttons.
Wait at least 5 minutes after the phone refreshes to see if your service returned.
If that does not work either you or another person can remove the Sim card and make sure not to touch the gold contacts. Wait a few minutes, reinstall the Sim carefully back into the phone. Turn it on see if you have service.
You can also go to an Apple Store and they can troubleshoot the device and if faulty can replace it right there
Good Luck

Similar Messages

  • My computer has a white screen at start up and sits for hours. How can I fix my computer?

    My computer has a white screen at start up and sits for hours. How can I fix my computer?

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
         a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.   
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • HT4437 I want to develop a software with AirPaly service for business things. How can I get the permission from Apple?

    I want to develop a software with AirPaly service for business things. How can I get the permission from Apple?
    This one is used in Windows laptop, and I want it support AirPlay service, but Apple doesn't publish the AirPlay protocol.
    Many thanks.

    Create a developer account, then access he developers forums and see if you can find the information that way 
    The other option would be to simply contact Apple directly.

  • I am trying to download the new OS Mavericks. It has been saying 'Waiting' for over an hour? How can I fix this?

    I am trying to download the new OS Mavericks. It has been saying 'Waiting' for over an hour? How can I fix this?

    with a little patience - people all over the world are downloading mavericks.
    alternatively you could restart your computer and try again

  • Hi im using a mac book pro, im having hard time viewing vidoes on Facebook, it just happen few hours ago, how can i fix it? thanks

    hi im using a mac book pro, im having hard time viewing vidoes on Facebook, it just happen few hours ago, how can i fix it? thanks

    Hello Terrychelle,
    Thank you for using Apple Support Communities!
    If the issue is to do with Safari, then you may need to reset it.
    Safari 6 (OS X Mountain Lion): Reset Safari
    http://support.apple.com/kb/ph11914
    Regards,
    Sterling

  • HT1498 "An error has occurred. Please try again later." i rented a movie and thats all i ve been getting for 5 days now. how do i fix it???

    "An error has occurred. Please try again later." i rented a movie and thats all i ve been getting for 5 days now. how do i fix it???

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • I tried to download the IOS 8.3 update but my phone has been frozen on a white loading screen for four hours. How do I fix this problem?

    My phone is completely frozen and the update has not loaded for four hours. How do I fix the problem without losing all of my stuff?

    You're saying you don't back up your phone regularly? You should ALWAYS back up before updating your phone. That said, try resetting first: hold down the home button and the power button for at least 10-20 seconds until you see the Apple. Hopefully you can then try to perform the update again. Start doing backups if your data is important to you.

  • ITunes / AppStore problem: I live in Colombia, my apple ID and iTunes account are set in Colombia, but each time I try to register my Colombian credit card it tells me my credit card is not valid for the store. How can I fix this?

    I live in Colombia, my apple ID and iTunes account are set in Colombia, but each time I try to register my Colombian credit card it tells me my credit card is not valid for the store. How can I fix this?

    credit card it tells me my credit card is not valid for the store.
    Hi Don ...
    "Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
    From here >  The Complete Guide to Using the iTunes Store | iLounge Article
    The iTunes and Mac App Store are one in the same.
    And check out this support article here   >  iTunes Store: My credit card's security code or zip code does not match my bank's records

  • A previous and unrelated text always appears when I need to send a new text. This prevents forwarding texts also, which I need to do all the time for my business. How can I fix? Please help!

    A previous and unrelated text always appears when I need to send a new text. This prevens forwarding texts also, which I need to do all the time for my businss. How can I fix? Please help?

    Hi,
    This sounds like it is about Window positions.
    iChat has Default places for Incoming Invites.
    Video is always top Center of your Screen
    Audio and Text chats are Upper right with the Audio slightly lower than Text Chats.
    Secondary invites are sort of Stacked like when you open multiple files from the same App.
    Your outgoing Windows are "Remembered" as to where the last one was when you used it.
    This can be an issue if you use your Mac with a second display and turn Off Mirroring.
    You windows can get "left" on the other screen.
    Go to System Preferences > Displays and turn On Mirroring and the windows should come back to one Screen/display.
    If this does not help go to your Home Folder/Library/Preferences and delete (Drag to Trash) com.apple.ichat.plist and restart iChat.
    Unfortunately you will need to reset any iChat Preferences you have changed from defaults.
    10:42 PM      Tuesday; April 26, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.7)
    , Mac OS X (10.6.7),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • I AM RECEIVING MULTIPLE EMAIL NOTIFICATIONS FOR FACEBOOK POSTS. HOW CAN I FIX THIS?

    I AM RECEIVING MULTIPLE EMAIL NOTIFICATIONS FOR FACEBOOK POSTS. HOW CAN I FIX THIS? I AM GETTING LIKE 6 DUPLICATE EMAILS FOR FACEBOOK NOTIFICATIONS. HOW CAN STOP THIS??

    Perhaps you should contact Facebook?

  • HT201210 I am trying to update my ipad 2 but it keeps telling me that it isn't eligible for the requested build how can i fix this problem

    I am trying to update my ipad 2 but it keeps telling me that it isn't eligible for the requested build how can i fix this problem

    This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
    Update to the latest version of iTunes.
    Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
    Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
    Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
    Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
    Copied from this website.
    http://support.apple.com/kb/TS3694#error3194

  • HT1692 I have duplicate contacts for every contact.  How can I fix this problem?

    I have duplicate contacts for every contact.  How can I fix this problem?

    Hi again,
    I found a previous thread on this that may resolve your problem:
    If you are syncing over the air with iCloud then DO NOT sync via the cable with Contacts. This causes duplicates. You are telling the iPhone to bring what is in those programs to the iPhone (one copy). Then you are syncing from the cloud (copy two).
    The iPhone will do exactly as you tell it to do.
    The easiest way to remove duplicates.
    1. On the info tab in iTunes uncheck sync contact and sync calendars.
    2. On the iPhone>settings>mail contacts calendars>@me.com account>slide Contacts and Calendars OFF
    3. Log into iCloud and look at contacts and calendars and make sure there are no duplicates.
    4. On the iPhone>settings>mail contacts calendars>@me.com account> slide to Contacts and Calendars ON
    When prompted choose to Replace with info from iCloud
    Had to update some of it with iCloud info (it had been written for Mobile Me), but hopefully this will work for you!
    Cheers,
    GB

  • HT2188 my iPhone is turned off and not getting power on despite charging for hours. How can I fix it? or do I need to send it to apple store? I am from Mankato, MN

    My Iphone 4s is shut down and not getting power on. Do I have the battery problem ? how can I fix it when my phone is not getting on and how can I contact to the apple ? I need to send it or fix it by myself within a limited time. I am from Mankato, MN.
    Please suggest me what should I do?

    Reset, hold both home and power buttons until the iPhone begins to start, usually takes about 10 seconds. If still nothing, connect to Wall Charger and Reset, this can sometimes take about 20 seconds of hold both buttons while on charger.

  • Someone else is using my email id for facetime and imessage, how can i fix this??

    How can i fix this??

    To elaborte on Davids response aortiz5 you can got to appleid.apple.com and click the option to manage your apple id.  Here you will be able to change your primary apple id and email address if you want. Or if this is your apple id and you think some one else has access to it you can click on passwords and security on the left and change your password for your apple id which will cause the other devices to prompt for the new password.

  • I cannot open word with friends through fb for a week now, how do you fix this

    Cannot open words with friends through face book for a few days now, how do you fix this

    I,m having same problem.  A little box opens  says.  Updating this May take a few moments...then kicks me out

Maybe you are looking for

  • Wireless modem and Airport Express.. one at a time

    Recently my internet provider upgraded my old plug in modem to a newer wireless model. Now it seems that the current setting allow communication with only one or the other at the same time. If I want to be online with the wireless modem and send my i

  • How to use Start Routine for this requirement

    Hello, I am having data in 2 ods and should load that data into cube, but there isn't any common object in both the ods's. I need to analyze based on these ods objects. so I thought of pulling some objects into 1ods which are used for analysis and ad

  • HR Auths - Manager has access to employee in OOSB but cannot access record

    Hi, I currently have a problem where a manager (M1) has the A012 relationship to an org unit (O1), however org unit (O2) reports (O1). Employees in org unit (O2) report to a supervisor who in turn reports to manager (M1). I assumed that with structur

  • 5D Markiii and a green color cast

    Does anyone else experience a green cast/tint to their images while shooting in JPG with a 5DMkiii? I shoot using AWB and have even adjusted the color on the quick screen histogram to try and compensate....but skintones consistantly look green. My mo

  • Message Server to ICM(s) redirection issue

    Hello, System setup: Backend network address: server_i0.domain.com.au Backend ip address: 10.10.1.10 Frontend network address: server_e0.domain.com.au Frontend ip address: 172.16.195.10 ABAP HTTP Message Server port: 8125 ICM port: 8025 The backend n