No service for 4 days!

I have had no service at all for 4 days, and all my AT&T phones on 3G work at my home, the iPhone does not. Can you say LEMON?
What can I do? I've called and visited a store, they replaced my SIM, that didn't work.
Image of iPhone and Treo http://h4xr.org/elca

call 800-my-iphone. I had the same probelm but for me I had to drive 1 1/2 to the closest ATT Company Store and then drove back the next day so they could a new sim card. The phone is bad and they are sending me a box to return it so it can either be repaired or I will receive a new one. Bummer.

Similar Messages

Internet Service drops for days and Useless Customer Service

Does anyone know how to get through Verizon's shield of 'customer service' and actually get a problem resolved? There's no means of direct access that I have found that can get past the technical support gate keepers to anyone with enough authority to think outside the script or actually look at a customers history and recognize something is wrong.
I have had DSL/High Speed Internet Enhanced service for 4 or 5 months now and have experienced probably 6 or 7 periods where I lose internet connectivity for about 2 to 5 days. The first couple of times I was nieve and believed it was because I live in the boonies and there had been some (mildly) bad weather, which could have knocked out local service. But it's been a reoccuring theme and I've discovered that the problem isn't infrastructure in the boonies, but the tie in to the internet at their central offices that is the problem. And each time I've always had 'dsl' connecitivity, but the 'internet' LED on my modem would be off.
Each time I call I'm forced to go through the same routines over and over. Here's a synopsis of how it goes (though the full routine eats up 30 minutes to an hour of time):
* Please turn equipment on/off (never mind I've already done that, connected to the modem's management interface, looked at settings/status long before I even considered calling Verizon)
* conveying the modem's model number (don't they have a record of this anywhere?)
* waiting while they perform a line test
* hearing 'there's no outage in your area, arguing that it isn't my equipment or on my end, hearing 'oh wait.... it turns out there is an outage in your area',
* hearing 'i'll contact the mysterious outage team (that you shall never directly speak to)' and call you back with a prognosis',
* (optional step) Receive a call back that says 'they're working on it and it will be back online in a few days.
* (optional step) Have it actually working in a couple of days.
Then I'm good to go for another 2 or 3 weeks.
On the previous round of outages I spoke to a 'supervisor', who actually called me back and let me know that he recognized this was a recurring problem and he had traced it to a router that had repeated failed. He assured me that I would be switched to another router immediately so it would not occur again (he actually 'promised' this won't be an issue going forward, not that I believed anything a verizon employee said to me at this point). He also mentioned the router was going to be replaced too. And he promised to pro-rate my bill to componsate me for all the days I didn't have service.
Fast forward two or three weeks, and he's proven wrong. Not only did I not get the discount in compensation for no service (not to mention rediculous amounts of time on the phone), the service was also down again. This time they called the day after I filed my initial repair request and reported it should be working, but to call 1800 verizon if it isn't. Since I wasn't home waiting on their call, they closed the ticket because of 'no customer response' Of course it wasn't actually working, so i called and opened another ticket. Now they claim it will be resolved tomorrow (about 6 days after I first called).
Now I understand equipment fails, lines get cut, etc. and I don't expect 100% uptime. But a nice, HONEST response explaining the situation and a recognition that a failure once or twice is fine, but 6 or 7 times is a chronic problem and should be escalated in priority would be great. And please don't placate me by telling me you're 'very sorry for my inconvenience' and that you will 'get it resolved for me'. I don't buy it at this point. Verizon has lost all of my trust. If there were a better alternative, I'd switch in a heart beat.

So how do I get my issue escalated like everyone else? Can any moderators hook me up? Or am I just out of luck?
Feel free to give me kudos so a moderator might notice this. Thanks.

I think pesimo customer service three days, I'm looking for someone I can ayudr activation problem with my CC and can not find anyone who can help me.

I think pesimo customer service three days, I'm looking for someone I can ayudr activation problem with my CC and can not find anyone who can help me.

Online Chat Now button near the bottom for Activation and Deactivation problems may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

4G Service for a Day

Last week, Verizon turned on the 4G for a day in my area last week as a surprise to me when I noticed I had 4G service with out any notice or information that the area would be getting the service (Houma, Louisiana). I know it is not a simple process to turn on and turn off, hence the problems after the 4G went out I rolled all the way back to 1x service until it stablilzed Friday after noon with 3G restored. My only concern was that with the 4G on the data transfer speed was terrible. It looked as though Verizon was a little bit lacking on the Data Backhauls where the speed was not as fast as what I can normally do in New Orleans where I cruise at nearly 10-20 Mbps.
Another concern of my was that hopefully this was a test and that 4G is coming soon in the next 30-60 days. If that is not the case then does Verizon follow Presidential Candidates as Newt Gingrich was in town and maybe he or they were providing 4G service for the media embeds.

I can report that 4G is on in Houma/Bourg/Lockport/Larose/Golden Meadow area of Louisiana southwest of New Orleans. Unfortunately, Verizon left this area out in the April press release about added areas to 4G. Also the coverage maps do not show the new upgraded area to 4G.
I was able to do some traveling in the past few days. Other areas that still are on 3G are Morgan City which is further west the 4G drops around the Gibson area on US 90, and the city of Thibodaux where Nicholls State University is does not have 4G. I don't know about lower Terrebonne or lower Lafourche going down to the Cocodrie or Grand Isle/Fourchon area respectively. It would be nice to fish and surf at 4G speeds in the middle of the some of the best fishing areas in the world.
As far as my equipment, my biggest complaint with my Thunderbolt is in the fringes of the 4G area where it flips to 3G for data and takes a while to rejoin the either the 3G or 4G network. Webpages will not load or take for ever to load. Sometimes I even have to restart my phone just to get a data connection back. Of course on the road by then I am closer to a better tower site and signal. Also when I am home, I must be between cells because my phone will drop to 3G inside, but outside it goes back to 4G.

No broadband for days after suddenly cutting out l...

Hi all,
I'm hoping you can help me with a very frustrating issue I am facing. On Friday 13th Jan, at 1pm and without warning, my BT broadband connection died and has not yet come back (so 4 days and counting).
I am an IT technician by trade and normally I am able to resolve any issues with these things myself. However, this time I exhausted all options (filters, lines, different router etc) and had to call BT's (not very good) offshore call centre, who use their wonderful training to read through a script asking me if the power is on
Anyway, long story short, my Fault was logged but nothing done. So I called back on Saturday, same script (even though I've been through it already...) and at the end of the call he says he'll escalate and next level support will call me on Sunday morning - apparently he had booked me in for a callback between 9 - 11am. And you can guess what happened - nothing, no phone call, nada.
So again I have to call the wonderful offshore call centre and go through the bl**dy script AGAIN. I've done it I tell him, but "Sorry Sir I must check these few things" **bleep** it. I'm losing my rag here and i am a very calm person by nature.
They have no idea what's wrong with my broadband. I tell them it was working on Friday 1pm then it suddenly cut out. Days later it's still not back, so there is a problem and I know it's not in my house.
My friends down the street have broadband with Zen and Plusnet and their connection is fine. So all otehr ISPs are working OK in our area.
My neighbour is with BT Broadband, like me, and his connection is also dead!
So the problem is not in my house! Even then they're sending an engineer down ...I expect he won't turn up though, but even if he does I can't imagine what he'll do in my house, because I'm fairly certain the problem is not there.
No communication to tell us what's wrong, or that BT are aware of the problem and working on it and will have my broadband back on x date etc. No record of it on BT's Service Status page or on 0800 169 0199. I can't believe how poor their service is. When I moved to BT I thought I was paying more for a better service, for a one-stop-shop that wouldn't let me down. I wish I'd done my research properly!
What can I do to get my broadband back?
Can I cancel my contract mid-term and move to another ISP which is working in my area?
Please help, I'm so **bleep** stressed over this as it's preventing my wife and I from being able to work at home.
Just for information, I'm in post code area TW19.

welcome to the forum
this is a customer help customer forum and the only people who can help you are the forum mods who are the only BT employees.
as you have checked for outage at your exchange some just in case different http://usertools.plus.net/exchanges/mso.php
http://usertools.plus.net/exchanges/?
http://btbusiness.custhelp.com/app/service_status
http://bt.custhelp.com/app/answers/detail/a_id/15036
if still nothing then contact the mods and see if they can help you http://bt.custhelp.com/app/contact_email/c/4951
it can take up to 3 days for mods to contact you
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

PHONE SERVICE FOR SPECIAL NEED CUSTOMER - YOU NEVER SHOWED????

We have been able to maintain my brother-in-law in an independent setting for most of his 59 years of life. Beyond his diabetes, cognitive delays and heart disease, he also struggles with the residual effects of schizophrenia and an awareness that he his different from other people. Recently, we had to move him into a new apartment and he needed land line phone service. We were not thrilled that we would have to wait more than 3-weeks to get an appointment - even after we explained he has medical needs - but we put as many supports as we could around him (needless to say, he forgets to charge his cell phone, but the walkie-talkies worked ok).
THEN the day of our appointment arrives - AND NO VERIZON??? We waited from1-5pm, taking time off work... and no technician showed. When we called to ask the status of our appointment, we were told that the appointment was on the computer but no notes as to why no one came. We were told we could Verizon could come the net day (which would be today , as I write) but it would be any time between 8am-5pm.
Why is this ok? Where is the customer service, the care? Why do I now have to wait from 8-5 for another technician - when we should ahve been put first on someone's list? I know we are not getting FIOS but...
I am venting here because there seems to be no customer concern hotline or email and I do not think this should get lost in the shuffle. Phone service for my brother-in-law is essential and vital to his wellbeing and abilitty to continue to function safely within the community. How can I recommend and respect your commitment to servicing persons with disabilities and special needs if this is my experiences with Verizon?

I'm sorry you are having difficulty. An agent with access to your account will reach out to you directly by email, private message in the Forums and/or the billing telephone number on your Verizon account for more information or to help you resolve your issue.
eocb wrote:
AND -
No one showed again today... When I called this afteroon to follow up if anyone was going to show - I was told, "No one is coming - Can't get you another appointment until the 23rd - and that's expedited" WHAT???? But my appointment was for YESTERDAY??? YOU DIDN'T SHOW UP. Why do I need a new 'expedited' appointment? AND, where was my phone call that you were NOT coming?
Verizon - please... explain this customer careappraoch? especially for someone that needs the phone service for his safety and well being. We ONLY needed the phone turned on - This is appalling and should NEVER have happened.
Shame on you, Verizon.

Mail Server Hosted on outlook freely but services for same getting shut from 31 july 2014

Dear Sir/ Madam,
My Mail Server Hosted on outlook freely but services for same getting shutting from 31
july 2014,
i want to continue the same product please advice me to get the same, i got the mail from outlook is follow
Dear Outlook.com Customer,
About a month ago, we let you know that Outlook.com no longer supports new custom domain sign ups. As a current customer, we will continue to support the ability to log in to Outlook.com with your existing custom domain email address, but as of 31 July 2014,
you will no longer be able to add or remove accounts in your domain.
Instead, we recommend that administrators who wish to continue managing email addresses in their domain should consider Office 365 – Microsoft's premium online email service. By migrating to Office 365, you will be able to continue managing your custom domains,
as well as benefit from modern enterprise-class mail, collaboration and communication tools.
The previous email we sent you contained a complimentary 90-day subscription to Office 365 Small Business Premium for 5 users. This is a reminder that you need to redeem this offer before 15 July 2014.
You will still be able to log in to Outlook.com with your custom domain during your Office 365 subscription, even if you choose to cancel your Office 365 subscription.
How to migrate your account
You can find a step-by-step guide to migrating your account here.
Yours sincerely,
The Outlook.com Team
please help me,
my contact no is - +91-9619899231

Hi,
Yes, as what Roady says, Outlook.com no longer supports new custom domain sign-ups. You can continue to login to Outlook.com with your existing custom domain email addresses. But after July 2014, domain administrators will no longer be able add or remove
email accounts in your domain.
Please consider to move to Office 365 to get enhanced features and capabilities for modern enterprise-class mail, collaboration and communications. About how to move your custom domain to Office 365, please refer to:
http://windows.microsoft.com/en-us/outlook/migrate-custom-domain
Regards,
Winnie Liang
TechNet Community Support

Services for Objects Attachement List Display Note not Viewable

Hi Experts!
Good day! I'm trying to display a note in FK03 (related to Services for Objects - Attachment List) and I only see white screen pop up window. No message and text information. When I tried to use another PC I can successfully view it.
Is there's a plugin that I may need to install?
Your help will be greatly appreciated.

Hi Marty
It is my understanding that the IXOS licensing is based on users retrieving of documents not necessarily the viewer so the licensing implications of having non-IXOS viewers accessing documents using the generic archivelink viewer is still likely to result in licensing implications if an audit is conducted at any stage.
The transaction for specifying the viewer is the OAA3 and OAG4.
Regards,
Athol

Purchase order: services for object toolbox missing

Hi
We create PO' via idocs. Sap automatically links the idoc to the PO via service for toolbox. This link is present but the toolbox is missing so we have to use the menu. In our develoment system there is a toolbox present in overview screen (ME22N/ME3N or WE02).
We can't find any difference between the systems so can anyone give us a hint?
KR
J

Hi
For some reason the toolbox re-appeared the next day. Now it is working fine.
Our next approach would have been to install note 913251 but at this moment is not needed.
KR
Jimmy

Services for Object (GOS) Attachement List not showing after attachment

Hi All,
I have created a new entry for the Generic Object Service List and this links to a copy of the CL_GOS_SRV_ATTACHMENT_CREATE class (Create attachment) with some additional logic. However, after attaching a file, the "Attachment List" does not become available until after I re-enter the transaction. The attachment list is showing the correct attachments.
After some (understatement...) investigation, I found that even if I try and link the new service to a unchanged copy of the CL_GOS_SRV_ATTACHMENT_CREATE service in SGOSATTR, it is not working. It is attaching fine, but the "Attachment List" entry in the Services for Object Menu is still greyed out. If I attach the original class CL_GOS_SRV_ATTACHMENT_CREATE to the newly created entry it works fine. e.g. straight after I attach a file to the transaction, the menu entry becomes available.
I can't find where the re-draw of the GOS menu happens and hence can not determine what is going wrong. Does anybody know if this is part of the Kernel or is this actually done in ABAP ?
Am I missing something ? Debugging including system debugging for two days now and can't find it... very frustrating.
Any help would be appreciated.
Thanks,
Wouter.

Hi Wouter,
I had originally posted to ask if you had resolved this since I was facing the same issue, but then deleted my post when I was able to get it working. Sorry, I didn't mean to initiate a flurry of activity in such an old thread.
My scenario is I created a new GOS service entry in table SGOSATTR using transaction SGOSM. My new service uploads attachments to an external document management system via a call to a RESTful web service. The class I use in the SGOSM entry is a custom subclass of CL_GOS_SRV_URL_CREATE.
I resolved this issue by taking a look at what CL_GOS_SRV_URL_CREATE does in its EXECUTE method. The key bits to refresh the GOS Attachment List with the new attachment are...
raise event commit_required. " if SGOSM has the commit flag checked
raise event service_succeeded
       exporting eo_service = me.
These events tell any subscribers to go do their thing-- which in this case includes a refresh of the GOS Attachment List. So in the EXECUTE method of my custom subclass, after I call function BINARY_RELATION_CREATE, I raise these events...
CALL FUNCTION 'BINARY_RELATION_CREATE'
   EXPORTING
       obj_rolea     = gs_object
       obj_roleb    = rel_doc
       relationtype = 'URL'
   EXCEPTIONS
       OTHERS       = 1.
CASE sy-subrc.
   WHEN 0.
       MESSAGE s043(sgos_msg). " The attachment was successfully created
       RAISE EVENT commit_required.
       RAISE EVENT service_succeeded
             EXPORTING eo_service = me.
   WHEN OTHERS.
       MESSAGE s042(sgos_msg). " The attachment has not been created
ENDCASE.
I hope this is helpful to you even though your initial implementation was a while back. Thanks for replying to my question though!!
Cheers,
Amy

What is the Smartnet service for the 2504 license upgrade LIC-CT2504-UPG ?

Hi guys,
Can some one explain me what is this service for ? I have the LIC-CT2504-UPG, with the LIC-CT2504-5A (5 AP licenses adder) and I don't understeand what are the SMARTNet services for this licenses ?
Are they needed if I already have the SMARTNet service for the hardware controller ?
Do these services provide something additional on top of the hardware service ?
Thank you.

HI,
Smartnet Service Contract:
Reduce downtime with fast, expert technical support, flexible hardware coverage, and smart, proactive device diagnostics with SMARTnet Service. Your IT staff has anytime access to Cisco engineers in the Technical Assistance Center (TAC) and an extensive range of resources, tools and training.
What You Get by having this contract :
Global 24-hour access to experts in the Cisco Technical Assistance Center (TAC)
Self-help support through online communities, resources, and tools
Hardware replacement options, including 2-hour, 4-hour and next business day
software updates and download from cisco website fro your controller.
Hope you got the point :)
Regards
Dont forget to rate helpful posts

No Service for 3 weeks & 3 replacement SIM cards!

I've had no service for almost 3 weeks and I've changed my SIM card 3 times as asked by the EE team on the phone. I had service for 1 day last week after I got my 2nd SIM card. Then the day after I'm back to no service again! I've since got a 3rd SIM card and it still doesn't work.
I've tried a pay&go sim and that works, so it's not a problem with the phone.
EE knocked me £20 off my bill when it got to 2 weeks no service, but now I want them to cancel my contract as I've had enough. Does anyone know if they will do this for free and not charge me for the remainder of the contract as they obviously can't fixed the problem. (I only have 3 months left of it)
I'm sick of calling them, I've spoken to 10 different agents over the past 2 weeks!!

Have you tried the SIM card in a different device ? It sounds like there is a issue when they migrate your number to the new SIM card and they are cancelling your new SIM card. But it's wirth trying a different device if you can. Also try going to a store to get a SIM card they can even start the migration of your number.

I have really slow internet, i bought OS X mountain lion & tried for days to download it. my internet cuts every time & the download restarts from the beginning is thr a way to download the software as a "zip" file or from a link not app store?

I have really slow internet, i bought OS X mountain lion & tried for days to download it. my internet cuts every time & the download restarts from the beginning is thr a way to download the software as a "zip" file or from a link not app store?

MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion?view=discussi ons
http://www.apple.com/support/macbookpro
Take it somewhere that has better broadband. The best you can do sometimes is invest in new modem that works with your system instead of the rental etc in most cases.
Do a Safe Boot.
Make sure your firewall is set properly. Don't use 3rd party. AV software can get in the way.
Make sure you are getting the service and a clean strong modem signal - slow is one thing but if it drops off and can't maintain a connection you have hardware issues, not software - and upgrade to a new OS doesn't tend to improve, it may even not work with older networking equipment once you do get it.
I agree and think electronic only goes too far. And when you do get it: burn the package and manually set it aside first before running the intaller! make a flash memory installer, put it on DVDs too.

Web Services for Oracle 8i

Is there any means for the Oracle 8i Platform to implement a Webservice to
access Business Logic in stored precedures?
We were evaluating IONA's XML Collaboration Suite and their Oracle Adaptor
but we are not satisfied with the level of control the adaptor provides.
Do you have any suggestions?
Best regards,
Andreas

Yes, you can publish stored procedures as Web services. Two approaches:
1. Check out the new Web services sample that came out the other day, example two where SQLJ is used to wrap a Java class as a stored procedure, the connection is then wired into the generated class and finally it is published as a Java Web service using Oracle9i JDeveloper 9.0.2. See:
http://otn.oracle.com/sample_code/tech/java/web_services/
and look at the Tax Calculator viewlet/code.
2. This is essentially the same way that the OC4J PL/SQL Web service samples work too (using SQLJ to generate a Java PL/SQL proxy), but the OC4J sample (url below), provides a more parametric way to pass the connection information to the proxy by using a parameter in the web.xml file. Check out:
http://download.oracle.com/otn/java/oc4j/how-to-web-services.zip
See the readme and work with the sample in plsqlws.zip
This one is a both better and worse from a developers perspective compared to the first Oracle9i Jdeveloper oriented example. The good part, depending on your perspective, is that it is all command line based (some people like this, some people don't) and uses the longer term approach to publishing stored procedures as Web services for Oracle9iAS with the parameters passed in via the web.xml. The bad part is the example is a little hard to follow because many of the pieces are already created for you rather than explaining how they were created. The first example at least shows pretty much all the steps but doesn't quite elegantly solve the connection problem that the OC4J sample does.
In July/August, Oracle9i JDeveloper will be updated to publish stored procedures using the Oracle9iAS infrastructure (basically the web.xml fix) ... although once you understand it, it is fairly easy to manually do it inside of JDeveloper.
Hope this gets you going.
Mike.

Desperate, help please Servlet.service() for servlet jsp threw exception

Hi,
I have completed 99.99% of project development, when I am about to deploy JSC throws "Servlet.service() for servlet jsp threw exception javax.faces.el.EvaluationException: java.lang.NullPointerException" I can't understand why.
My application was working absolutely fine, I can't understand why its throwing exception now.
I tried debuging, but i can't understand where exactly its throwing exception and whats the error.
I would really appreciate your help, I have spent almost a day trying to figure out but din't get anywhere.
here is my server.log
Starting Sun Java System Application Server Platform Edition 8.0.0_01 (build b08-fcs) ...
[#|2005-08-23T11:44:39.221+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|CORE5076: Using [Java HotSpot(TM) Client VM, Version 1.4.2_06] from [Sun Microsystems Inc.]|#]
[#|2005-08-23T11:44:42.025+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM0020:Following is the information about the JMX MBeanServer used:|#]
[#|2005-08-23T11:44:42.327+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM0001:MBeanServer initialized successfully|#]
[#|2005-08-23T11:44:44.572+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|Creating virtual server server|#]
[#|2005-08-23T11:44:44.598+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|S1AS AVK Instrumentation disabled|#]
[#|2005-08-23T11:44:44.616+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.security|_ThreadID=10;|SEC1143: Loading policy provider com.sun.enterprise.security.provider.PolicyWrapper.|#]
[#|2005-08-23T11:44:51.061+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.transaction|_ThreadID=10;|JTS5014: Recoverable JTS instance, serverId = [100]|#]
[#|2005-08-23T11:44:53.917+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|Satisfying Optional Packages dependencies...|#]
[#|2005-08-23T11:44:54.400+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.resource.resourceadapter|_ThreadID=10;|RAR7008 : Initialized monitoring registry and listeners|#]
[#|2005-08-23T11:44:56.346+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|CORE5100:Loading system apps|#]
[#|2005-08-23T11:44:58.494+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.ejb|_ThreadID=10;|EJB5109:EJB Timer Service started successfully for datasource [jdbc/__TimerPool]|#]
[#|2005-08-23T11:44:58.494+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.classloading|_ThreadID=10;|LDR5010: All ejb(s) of [__ejb_container_timer_app] loaded successfully!|#]
[#|2005-08-23T11:44:59.954+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.classloading|_ThreadID=10;|LDR5010: All ejb(s) of [MEjbApp] loaded successfully!|#]
[#|2005-08-23T11:45:01.401+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.classloading|_ThreadID=10;|LDR5010: All ejb(s) of [ConverterApp] loaded successfully!|#]
[#|2005-08-23T11:45:01.407+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0100: Loading web module [ConverterApp:war-ic.war] in virtual server [server] at [converter]|#]
[#|2005-08-23T11:45:02.500+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.classloading|_ThreadID=10;|LDR5010: All ejb(s) of [travelApp] loaded successfully!|#]
[#|2005-08-23T11:45:02.792+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.classloading|_ThreadID=10;|LDR5010: All ejb(s) of [HelloWorldApp] loaded successfully!|#]
[#|2005-08-23T11:45:02.798+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0302: Starting Tomcat.|#]
[#|2005-08-23T11:45:03.281+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0100: Loading web module [adminapp] in virtual server [server] at [web1]|#]
[#|2005-08-23T11:45:03.335+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0100: Loading web module [admingui] in virtual server [server] at [asadmin]|#]
[#|2005-08-23T11:45:03.338+0100|WARNING|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0500: default-locale attribute of locale-charset-info element has been deprecated and is being ignored. Use default-charset attribute of parameter-encoding element instead|#]
[#|2005-08-23T11:45:03.351+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0100: Loading web module [com_sun_web_ui] in virtual server [server] at [com_sun_web_ui]|#]
[#|2005-08-23T11:45:03.371+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0100: Loading web module [jTravellerService] in virtual server [server] at [jTravellerService]|#]
[#|2005-08-23T11:45:03.399+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0100: Loading web module [hello-jaxrpc] in virtual server [server] at [hello-jaxrpc]|#]
[#|2005-08-23T11:45:03.427+0100|INFO|sun-appserver-pe8.0.0_01|org.apache.catalina.startup.Embedded|_ThreadID=10;|Starting tomcat server|#]
[#|2005-08-23T11:45:03.428+0100|INFO|sun-appserver-pe8.0.0_01|org.apache.catalina.startup.Embedded|_ThreadID=10;|Catalina naming disabled|#]
[#|2005-08-23T11:45:03.637+0100|INFO|sun-appserver-pe8.0.0_01|org.apache.catalina.core.StandardEngine|_ThreadID=10;|Starting Servlet Engine: Sun-Java-System/Application-Server-PE-8.0|#]
[#|2005-08-23T11:45:13.214+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.resource.webservices.rpc.server.http|_ThreadID=10;|JAXRPC.JAXRPCSERVLET.12: JAX-RPC context listener initializing|#]
[#|2005-08-23T11:45:14.087+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.resource.webservices.rpc.server.http|_ThreadID=10;|JAXRPC.JAXRPCSERVLET.14: JAX-RPC servlet initializing|#]
[#|2005-08-23T11:45:14.268+0100|INFO|sun-appserver-pe8.0.0_01|org.apache.catalina.startup.ContextConfig|_ThreadID=10;|Missing application web.xml, using defaults only StandardEngine[server].StandardHost[server].StandardContext[]|#]
[#|2005-08-23T11:45:18.600+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.resource.webservices.rpc.server.http|_ThreadID=10;|JAXRPC.JAXRPCSERVLET.12: JAX-RPC context listener initializing|#]
[#|2005-08-23T11:45:18.657+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.resource.webservices.rpc.server.http|_ThreadID=10;|JAXRPC.JAXRPCSERVLET.14: JAX-RPC servlet initializing|#]
[#|2005-08-23T11:45:20.710+0100|INFO|sun-appserver-pe8.0.0_01|org.apache.coyote.http11.Http11Protocol|_ThreadID=10;|Initializing Coyote HTTP/1.1 on port 18080|#]
[#|2005-08-23T11:45:20.790+0100|INFO|sun-appserver-pe8.0.0_01|org.apache.coyote.http11.Http11Protocol|_ThreadID=10;|Starting Coyote HTTP/1.1 on port 18080|#]
[#|2005-08-23T11:45:21.125+0100|INFO|sun-appserver-pe8.0.0_01|org.apache.coyote.http11.Http11Protocol|_ThreadID=10;|Initializing Coyote HTTP/1.1 on port 11043|#]
[#|2005-08-23T11:45:21.144+0100|INFO|sun-appserver-pe8.0.0_01|org.apache.coyote.http11.Http11Protocol|_ThreadID=10;|Starting Coyote HTTP/1.1 on port 11043|#]
[#|2005-08-23T11:45:21.503+0100|INFO|sun-appserver-pe8.0.0_01|org.apache.coyote.http11.Http11Protocol|_ThreadID=10;|Initializing Coyote HTTP/1.1 on port 14848|#]
[#|2005-08-23T11:45:21.537+0100|INFO|sun-appserver-pe8.0.0_01|org.apache.coyote.http11.Http11Protocol|_ThreadID=10;|Starting Coyote HTTP/1.1 on port 14848|#]
[#|2005-08-23T11:45:21.989+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.resource.jms|_ThreadID=10;|JMS5023: JMS service successfully started. Instance Name = imqbroker, Home = [/opt/Creator/SunAppServer8/imq/bin].|#]
[#|2005-08-23T11:45:22.003+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.tools.admin|_ThreadID=10;|[AutoDeploy] Enabling AutoDeployment service at :1124793922003|#]
[#|2005-08-23T11:45:22.009+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|CORE5053: Application onReady complete.|#]
[#|2005-08-23T11:45:22.012+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|Application server startup complete.|#]
[#|2005-08-23T11:45:27.303+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.tools.admin|_ThreadID=11;|ADM1041:Sent the event to instance:[ResourceDeployEvent -- deploy jcp/RaveGenerated_1124793926_NFDBPool]|#]
[#|2005-08-23T11:45:28.918+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=11;|CORE5004: Resource Deployed: [jcp:RaveGenerated_1124793926_NFDBPool].|#]
[#|2005-08-23T11:45:29.169+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.tools.admin|_ThreadID=11;|ADM1041:Sent the event to instance:[ResourceDeployEvent -- deploy jdbc/jdbc/NFDB]|#]
[#|2005-08-23T11:45:29.365+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=11;|CORE5004: Resource Deployed: [jdbc:jdbc/NFDB].|#]
[#|2005-08-23T11:45:31.996+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.tools.deployment|_ThreadID=11;|DPL5109: EJBC - START of EJBC for [_linnfdb]|#]
[#|2005-08-23T11:45:31.999+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.tools.deployment|_ThreadID=11;|Processing beans ...|#]
[#|2005-08-23T11:45:32.032+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.tools.deployment|_ThreadID=11;|DPL5110: EJBC - END of EJBC for [_linnfdb]|#]
[#|2005-08-23T11:45:32.915+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.tools.deployment|_ThreadID=11;|Total Deployment Time: 2082 msec, Total EJB Compiler Module Time: 37 msec, Portion spent EJB Compiling: 1%
Breakdown of EJBC Module Time: Total Time for EJBC: 37 msec, CMP Generation: 0 msec (0%), Java Compilation: 0 msec (0%), RMI Compilation: 0 msec (0%), JAX-RPC Generation: 19 msec (51%),
|#]
[#|2005-08-23T11:45:32.928+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.tools.deployment|_ThreadID=11;|deployed with moduleid = _linnfdb|#]
[#|2005-08-23T11:45:32.990+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.tools.admin|_ThreadID=11;|ADM1041:Sent the event to instance:[ModuleDeployEvent -- deploy web/_linnfdb]|#]
[#|2005-08-23T11:45:33.275+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.tools.admin|_ThreadID=11;|ADM1041:Sent the event to instance:[ModuleDeployEvent -- enable web/_linnfdb]|#]
[#|2005-08-23T11:45:33.352+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=11;|WEB0100: Loading web module [_linnfdb] in virtual server [server] at [linnfdb]|#]
[#|2005-08-23T11:45:34.837+0100|WARNING|sun-appserver-pe8.0.0_01|org.apache.commons.beanutils.MethodUtils|_ThreadID=11;|Cannot use JVM pre-1.4 access bug workaround die to restrictive security manager.|#]
[#|2005-08-23T11:45:35.346+0100|WARNING|sun-appserver-pe8.0.0_01|org.apache.commons.digester.Digester|_ThreadID=11;|[ConverterRule]{faces-config/converter} Merge(null,java.math.BigDecimal)|#]
[#|2005-08-23T11:45:35.364+0100|WARNING|sun-appserver-pe8.0.0_01|org.apache.commons.digester.Digester|_ThreadID=11;|[ConverterRule]{faces-config/converter} Merge(null,java.math.BigInteger)|#]
[#|2005-08-23T11:45:37.265+0100|INFO|sun-appserver-pe8.0.0_01|com.sun.faces.config.ConfigureListener|_ThreadID=11;|Application object verification completed successfully|#]
[#|2005-08-23T11:45:37.396+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.tools.admin|_ThreadID=11;|ADM1042:Status of dynamic reconfiguration event processing:[success]|#]
[#|2005-08-23T11:46:28.167+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.stream.out|_ThreadID=12;|login successfull145|#]
[#|2005-08-23T11:46:28.961+0100|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.stream.out|_ThreadID=12;|
assigned to user query|#]
[#|2005-08-23T11:46:34.715+0100|SEVERE|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=12;|ApplicationDispatcher[/linnfdb] Servlet.service() for servlet jsp threw exception
javax.faces.el.EvaluationException: java.lang.NullPointerException
at
com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:206)
     at com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:154)
     at javax.faces.component.UISelectItems.getValue(UISelectItems.java:110)
     at com.sun.faces.util.Util.getSelectItems(Util.java:602)
     at com.sun.faces.renderkit.html_basic.MenuRenderer.getOptionNumber(MenuRenderer.java:488)
     at com.sun.faces.renderkit.html_basic.MenuRenderer.renderSelect(MenuRenderer.java:465)
     at com.sun.faces.renderkit.html_basic.MenuRenderer.encodeEnd(MenuRenderer.java:430)
     at javax.faces.component.UIComponentBase.encodeEnd(UIComponentBase.java:720)
     at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:443)
     at com.sun.faces.renderkit.html_basic.GroupRenderer.encodeChildren(GroupRenderer.java:130)
     at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
     at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:435)
     at com.sun.faces.renderkit.html_basic.TableRenderer.encodeBegin(TableRenderer.java:113)
     at javax.faces.component.UIComponentBase.encodeBegin(UIComponentBase.java:683)
     at javax.faces.component.UIData.encodeBegin(UIData.java:681)
     at javax.faces.webapp.UIComponentTag.encodeBegin(UIComponentTag.java:591)
     at javax.faces.webapp.UIComponentTag.doEndTag(UIComponentTag.java:543)
     at com.sun.faces.taglib.html_basic.DataTableTag.doEndTag(DataTableTag.java:491)
     at org.apache.jsp.NationalFaultsDataBase_jsp._jspx_meth_h_dataTable_0(NationalFaultsDataBase_jsp.java:581)
     at org.apache.jsp.NationalFaultsDataBase_jsp._jspx_meth_h_form_0(NationalFaultsDataBase_jsp.java:331)
     at org.apache.jsp.NationalFaultsDataBase_jsp._jspx_meth_f_view_0(NationalFaultsDataBase_jsp.java:291)
     at org.apache.jsp.NationalFaultsDataBase_jsp._jspService(NationalFaultsDataBase_jsp.java:182)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:102)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:861)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:282)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:263)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:210)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:861)
     at sun.reflect.GeneratedMethodAccessor84.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:246)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
     at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:268)
     at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:236)
     at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
     at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:145)
     at java.security.AccessController.doPrivileged(Native Method)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:141)
     at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:718)
     at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:478)
     at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:413)
     at org.apache.catalina.core.ApplicationDispatcher.access$000(ApplicationDispatcher.java:77)
     at org.apache.catalina.core.ApplicationDispatcher$PrivilegedForward.run(ApplicationDispatcher.java:92)
     at java.security.AccessController.doPrivileged(Native Method)
     at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:319)
     at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:322)
     at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:130)
     at com.sun.jsfcl.app.ViewHandlerImpl.renderView(ViewHandlerImpl.java:181)
     at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
     at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:221)
     at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:246)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
     at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:268)
     at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:236)
     at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
     at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:145)
     at java.security.AccessController.doPrivileged(Native Method)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:141)
     at linnfdb.data.SecurityCheckFilter.doFilter(SecurityCheckFilter.java:102)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:246)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
     at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:268)
     at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:218)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:188)
     at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
     at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:145)
     at java.security.AccessController.doPrivileged(Native Method)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:141)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:220)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:109)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:522)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:214)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:168)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:109)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:522)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:144)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:109)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:133)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
     at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:539)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
     at com.sun.enterprise.webservice.EjbWebServiceValve.invoke(EjbWebServiceValve.java:134)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
     at com.sun.enterprise.security.web.SingleSignOn.invoke(SingleSignOn.java:254)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
     at com.sun.enterprise.web.VirtualServerValve.invoke(VirtualServerValve.java:209)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:522)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:114)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:109)
     at com.sun.enterprise.web.VirtualServerMappingValve.invoke(VirtualServerMappingValve.java:166)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:522)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:936)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:165)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:683)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:604)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:542)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:647)
     at java.lang.Thread.run(Thread.java:534)
Caused by: java.lang.NullPointerException
     at com.sun.jsfcl.data.ResultSetPropertyResolver$ColumnData.getSelectItems(ResultSetPropertyResolver.java:303)
     at com.sun.jsfcl.data.ResultSetPropertyResolver.getValue(ResultSetPropertyResolver.java:61)
     at com.sun.faces.el.impl.ArraySuffix.evaluate(ArraySuffix.java:167)
     at com.sun.faces.el.impl.ComplexValue.evaluate(ComplexValue.java:151)
     at com.sun.faces.el.impl.ExpressionEvaluatorImpl.evaluate(ExpressionEvaluatorImpl.java:243)
     at com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:173)
     ... 115 more
|#]
any help will be greatly appreciated. Pleaseeeeeeeeeeeeee can some get back to me.
Cheers
kumar

hi,
I just found that this exception is thrown from function
public UIViewRoot createView(FacesContext context, String viewId) {
UIViewRoot viewRoot = handler.createView(context, viewId);
context.getExternalContext().getRequestMap().put(CREATED_VIEW, viewId);
setupPageBean(context, viewRoot);
return viewRoot;
in viewHandlerImpl.java.
Has anyone got ideas about this???
Any help will be greatly appreciated.
cheers
kush

Miss informed about U Verse Service for existing Att Wireless Customers

I signed up for new Att u verse service because off a $400 rebate. I called and established new service for U verse and Internet bundle which I was told there would be a $400 rewards VISA card. I disconnected my contracted DirecTV with a early termination fee relying on this rewards card to pay off the early termination. Now to come to find out 3 months wondering where my rewards card is that I don't qualify. Very disappointed!! I would have never agreed for this service if I was not offered a $400 rewards card. And to make matters worse the bundle that was installed isn't even what I ordered and customer service is telling me they can't change it because the service was already installed. I am livid....being a happy Att wireless customer I am now second guessing my decision to activate such service. I feel jipped and lied too!!!

Have a hunch you missed the notice from ATT, about 30 days after install, about the Reward Center to get your reward card. Then you had to go there to redeem it and get it 3-4 weeks after that.
If you'd come here after you just got installed, we'd have told you about the Reward Center.
Chris
Please NO SD stretch-o-vision or 480 SD HD Channels
Need Help? PM ATT Uverse Care (all service problems)
ATT Customer Care(all other problems)
Your Results May Vary, In My Humble Opinion
I Call It Like I See It, Simply a U-verse user, nothing more

No service for 4 days!

Similar Messages

Maybe you are looking for