"No service for system..." after transporting from dev to prod

Hi,
again i have a problem like some other guys also had. I already checked several postings concerning this issue!
We transported dev-objects to prod, also ID-object like Business Systems.
The sender side now changed their communication for sending IDoc's to our Prod-XI. While sending IDoc's form Prod R/3 they get "no service for system SAPPSI, client010.." etc.
I already checked:
1. idx1 port is SAPPSI pointing to right destination PSI
2. idx2 all necessary Metadata are loaded
3. checked adapter specific identifiers in ID and also reloaded them with no change!
4. in receiver IDoc CC i added RFC-Dest: PSI and Port is SAPPSI
5. did a cache refresh!
I need to let you know that we are using one SLD and already communicated with the sender-prod r/3 -system to SAP XI -DEV.
can someone please help us?! we have no clue what might be wrong!!
br

Well i have some strange thoughts:
when the idoc is send in sender-system the values on sender informations are:
Port: SAPPSI
Partner number: PSICLNT010
Type: LS
The error we receive is:
no service for system SAPPSI, client 010 in Integration Directory
Shouldn't there be the Partner-Number like PSICLNT010?!
Can someone confirm and tell me if i am right?!
br

Similar Messages

BADI not found in QA System after transporting from DEV system

Hi,
I had created a new implementation ZHR_IN_CALC_PTX_AMT to the BADI: HR_IN_CALC_PTX_AMT in the DEV system with Request ID. But when i had transported that request, i am not able to find that BADI implementation in SE18 and SE19 respectively in Quality system.
Please suggest me on this, as this is urgent.
Regards.
Ravi

Hi,
Can you pls repeat the BADI Definition name? I couldn't find HR_IN_CALC_PTX_AMT in SAP versions 4.7, 5.0 and 6.0. Which is the version you use for development?
Regards,
Renjith Michael.

Problems when transporting from DEV to PROD

Hi experts, I have problem during transport from DEV to Production.
We have a DEV, QAS and PRODUCTION and we have transport from DEV to QAS very well. But when we transport from DEV to PROD, recibe an error like:
After beginning the import method RS_IOBC_AFTER_IMPORT for Objects types IOBC mode (activation)
Failed to verify catalog InfoObjetos ZCM_UNIMET_CHA01
The InfoObjeto ZCM_RENC version does not exist in active
The InfoObjeto ZCM_RENM version does not exist in active
1.The Query is: Wy if the transport go OK from DE to QAS, then The transport from DEV to PROD terminated in error?.
2. There are any items to check in production before to transport?.
PD: All of the Objects in DEV are in ACTIVE status
Tanks,
Ramon Sulvaran

The transport ended in QAS with error code (4) and ended in Producion with error code (8), the detal of the error in Production begin with:
Home After import RS_ODSO_AFTER_IMPORT method for type (s) ODSO object (trigger mode)
Activation of DataStore objects of type Object
Check DataStore objects of type Object
DataStore Object Verification ZCM_DS01
The DataStore object is consistent ZCM_DS01
Burning the DataStore objects of type Object
Internal activation (DataStore Object)
Pretreatment / Creating DDIC objects to DataStore Object ZCM_DS01
Table / View / BIC/AZCM_DS0100 (type 0) DataStore object recorded ZCM_DS01
Create / Delete the indexes for the active table
Table / View / BIC/AZCM_DS0140 (type 4) recorded ZCM_DS01 DataStore object
Type of table / BIC/WAZCM_DS0100 recorded
Table / View / BIC/VZCM_DS012 (type VIEW) recorded ZCM_DS01 DataStore object
Log ZCM_DS01 DataStore object changes was recorded successfully
Writing Object Catalog entries (Tadiran)
He has written the object TABL / BIC/AZCM_DS0100 in catálgo objects (Tadiran)
He has written the object TABL / BIC/AZCM_DS0140 in catálgo objects (Tadiran)
He has written the object TABL / BIC/VZCM_DS012 in catálgo objects (Tadiran)
He has written the object TTYP / BIC/WAZCM_DS0100 in catálgo objects (Tadiran)
Activate all ABAP Dictionary objects (5):
Error / Warning in progr.activación Dict., Detailed log> Detail
Activate table / BIC/AZCM_DS0100.
Lack of expansion to the category table
Lack of extension category for include or subtype .......
When i go to BW Production to check teh object. I see tha the Object was create but in inactive status (grey color). When y Try to Actiavate it y see the error: Error/ Warning in program Activation Dcit. Detailed Log -> Detail

Transport from DEV to PROD BPC 7.5

Hi
i had a question of transporting AppSets from DEV to PROD System.
On the PROD Systems are no AppSets the PROD System is completly new.
Is it possible to transport the AppSets directly from the DEV to the PROD or must we first make a Backup in the DEV and an Restore in the PROD.
Thank you for your help.

Hi Carsten,
As far as i understand you need to transport application sets individually, from development to production. The object type ASET and APPM refer to an application set and application respectively.
As mentioned above, you can check and confirm from SAP Support if the back up mode ia now available to users.
Hope this helps.
Regards,
Poonam

QAAWS in not found in prod Qaaws after promoting from dev to prod

Hi Expert,
I have promoted my all qaaws from dev to production server,
all the qaaws are shows in CMC production but, while i am open in Query as a web service
it not showing any qaaws.
I have restart the BO production server , still the same problem is happend
Tell me how to rectify that issue.
Thanks and Regards
Lalit Kumar

Well i have some strange thoughts:
when the idoc is send in sender-system the values on sender informations are:
Port: SAPPSI
Partner number: PSICLNT010
Type: LS
The error we receive is:
no service for system SAPPSI, client 010 in Integration Directory
Shouldn't there be the Partner-Number like PSICLNT010?!
Can someone confirm and tell me if i am right?!
br

BEx Query objects transported from Dev to Prod Test do not overwrite

Hello,
I'm migrating BEx queries that were developed in a Dev instance and then packaged and imported into a prod test environment. The queries that already exist in qual are not overwritten with the changes, and the transport imports successfully. New queries import just fine and without issue. I'm not sure if this is a problem with how I am packaging the query for transport or some level of pre-work that is not being done in Prod test. Basis has confirmed that they are allowing re-writes when Importing.
Any suggestions?
Thanks.
Matt

Hi ,
Whenever we create a query in the System it generates reference ID's ( ELTUID,SELTUID,COMPUID etc) in backend.
For e.g.if you create a query in your quality system (Z_TEST) it will have a COMPUID generated for it (e.g ABCD).
Now when you create a query in Dev system (with the same technical name Z_TEST) a new COMPUID will get generated (e.g EFGH)
So when you transport Z_TEST to QUALTY ,it will create a new entry against COMPUID.thus having two instances of the same query.So best option would be to delete the old instance after transporting the new instance.
This wil solve your problem.
-Vikram Srivastava

Installing BC on prod system or transporting from dev?

hi,
what is better:
Install BC on developement system and then transport it on production
or
install BC on developement for tests and then again install on production (assuming that in both cases I do not change anything)
Regards,
Andrzej

Hi dear!
I woould be more peremptory: you have to this activity on your DEV and then to transport it on PRD environment!
Why should you "install BC on developement for tests and then again install on production (assuming that in both cases nothing changes)" ?
Because if your company has a development environment, probably, sooner or later, you will develop something (and not only use the std content with no modification...). When you will need to do only a little customization on your installed std objects and you didn't imported them in PRD via transport request, situation you have to manage will not be the easiest one (to avoid inconsistencies and so on...).
Hope it helps!
Bye,
Roberto

DBIF_RSQL_SQL_ERROR while doing a transport from DEV to PROD

Hi,
We are trying to transport some requests from our BW Development to BW Production. As we are importing the request we are facing the following two runtime errors in Dev.
1.
Database error text........: "ORA-01654: unable to extend index SAPSR3.TBTCO~1
by 128 in tablespace PSAPSR3"
Internal call code.........: "[RSQL/INSR/TBTCO ]"
2.
Database error text........: "ORA-01653: unable to extend table
SAPSR3.TMSALOGAR by 128 in tablespace PSAPSR3"
Internal call code.........: "[RSQL/INSR/TMSALOGAR ]"
Looking forward to your help on this error. Additionally please let me know if this has got anything to do with Production? Or as this is occuring in Development this is an development issue only?
Thanks,
Andy Kroos.

Ask your basis guys to increase the table space...
check this thread...
[Error : DBIF_RSQL_SQL_ERROR;
--- Thanks...

Can not transport from DEV to PRD (Hang up)

Hi Experts,
Please help.. I have this problem, was not able to transport from Dev to Prod, it just hang up.. I've read a lot in web how to solve this problem and did the following:
   ==> Stop all TP running in OS level
   ==> Delete all pending job in Import Monitor (with truck logo)
   ==> and the last to be done is to delete the data from table TRBAT, but it took so long to delete the data in that table.. What I've noticed is that the data left in table TRBAT is the transport number wherein user was log-off during transport execution (as in the middle of the process)..
What should be the solution of this problem, as we can not proceed with the transport of our changes made in DEV system, as it just hang up in there.. and I'm also having this problem in deleteing data from TRBAT table.
Thanks.
Edited by: Deo Pasion on Feb 20, 2010 7:25 AM

Hi,
Its well known problem which is discussed many times in many threads.
Did you check TP System Log and TMS Alert of the System ?
Execute RSTPTEST report to check the STMS configuration. Also check the existence/status of RDDIMPDP Background Job.
Please refer these useful threads with similar symptoms.
[Transport (STMS) issue + Hang|Transport (STMS) issue + Hang]
[regarding STMS_IMPORT Transport Hang.|regarding STMS_IMPORT Transport Hang.]
Also check this SAP Note 71353 - Transports hang during background steps.
Regards
Bhavik G. Shroff

Error while importing request from DEV to PROD

Dear Experts,
                  i am having the problems with request no.. There are two transport request nos and these have to be transported
                 from DEV to PROD. I relesed these two but while importing into PROD showing everthing completed successfully
                  with one error and error is Generation or programs and screens for both transport requests .
                  I am just enable to understand what this message is for ..
                   Please someone help me out in this....
with regards.
Praveen.
Moderator message: please search for available information/documentation before asking, read the detailed transport logs, correct the errors, try again.
Edited by: Thomas Zloch on Dec 13, 2010 6:05 PM

Hi,
First check the source system: ZSTGLDV110 is exists or not. check the rfc connections (Also check the source system assignment in both the system to each other). check the settings in the stms tcode. check the suppoet pack on your quality system,.... there are plenty of reasons.
thanks.

STMS , logs? for transports from DEV 200 to QAS 200, 201 & 202

We are transport from DEV client 200 to QAS client 200, 201 and 202 using stms and specifying which client we want the transport to go to.
After the transports, how can the development team find the logs for these transports.
Right now, we as basis can see the results after each of the transports to each client. IF there is an error then we stop and ask the dev. team to review the logs. However IF the transports go thru without error, HOW can we go back over time to confirm that there were in fact NO errors for transport to each client?
Thanks
Maria

Hello Maria
After you import the transport,in the STMS menu only you can see the option for checking import logs
just click on that and you will be able to see the import logs of a transport.If you drill the logs,you can see everything what the transports has done,what objects have been moved,also if there are any warnings or errors
Rohit

Transports from Dev System to Quality System, Objects copied in Local reque

Hi All,
I am doing transports from Dev Box to Quality Box, while collecting the objects , some required objects got collected in a local request(9xxxxxx) and some got collected in Work bench request(9yyyyyy), Now I want to add , the objects collected in the local request to the work bench request to have a single work bench request i.e 9yyyyyy for transport , with all the objects of the local request 9xxxxxx and already collected objects in work bench request 9yyyyyy,
Please provide the solution for the situation
Thanks in advance
suitable answers will be awarded
Prasad

Hi,
1.First see that your workbench request has a different target system than the ones pointed to by the development class/package of the objects you are trying to assign.
or,
The objects are not assigned to correct development class/package.
2. When we try to create a workbench request, we will see only the request and that is fine.
3.Now, release the local request containing your objects.
4.Include the local transport objects to the new workbench request (Ctrl + F11).
and release and transport the workbench request.
Pls assaign the points if it is useful.
Regards,
Raghavendra Rao.Kolli.

Transporting SLD objects from DEV to PROD

Hi,
I need to move My SLD objects from DEV to PROD. There is no QA. Also SLD is not common across DEV and PROD.
Thanks!!
Regards,
Miten.

Hi,
How to handle SLD for Tranporting Dev to Quality ser
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
Transporting XI from DEV to QA
Transporting XI from DEV to QA
using CMS system. in XI
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content .htm --> Configuring Groups and Transport Targets
Look into this blog for how to export / improt IR and ID objects,
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
/people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
Here are some blogs.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Re: Moving project from Dev to QA
Error while exporting/transporting the Business system from Dev to Quality
Transporting the scenario frm Dev Server to PRD Server
transporting data from Dev to quality using CMS
Regards,
Phani
Reward points if Helpful

Handle metadata of configuration objects when transported from DEV to QA?

All,
I was reading this blog /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
<i>"Unlike IR when we import the scenarios in ID the configuration metadata will be lost and have to be manually entered in the QA ID. For Ex: Parameters like source directory, filename scheme, FTP server will vanish and have to be entered appropriately as required for QA sand box. After entering the metadata we need to activate all the scenario objects in the ID. After successful activation your interfaces are ready for testing."</i>
From the above I understand there are somethings(like adapter metadata..) that has to be entered manually when the objects are transported from dev to QA.
So my question is, for what all objects of ID needs metadata to be entered manually in QA.
Party?
Business systems(business systems, bus servcies, integration process)?
Communication channels?
Receiver determination?
Interface Determination?
Sender Agreement?
Receiver Agreement?
I appreciate your reply
Thanks
KK

Hi,
first of all it's not adapter's metadata
(adapter's metadata is something completely different)
the "thing" that will dissapear is the adapters'
configuration (configuration of your communication channels) - that's all
RFC destination (idoc adapter) ftp server (file adapter) etc.
basically all you need to do
is to fill it one every system (QAT, PRD etc.)
Regards,
michal

Basis: No service for system , client in Integration Directory??

Hi All,
IDocs from SAP QA are not being sent to PI QA. I see error in SM58 in SAP QA as: No service for system , client in Integration Directory. Please dont jump to asnwers by looking at above error. I could fix that, but thats not the real problem.
Because I have checked
1) SLD home page ---> Technical Landscape --> Select Web AS ABAP --> Select the technical system --> Clients ---> Click on the client used as Business system --> Here look for the logical system is defined (No Problem here, as logical systems is defined).
2) ID---> Click on Objects --> Service Without party/Party > Double click on business system>On the tright side--> Service --> Adapter specific Identifiers ---> Check IDoc Adpater, Logical System (No Problem here as I see Logical System).
But I can't find values R/3 System ID and Client under "IDoc Adapter and RFC Adapter". I think thats problem here, when I click on "Compare with SLD" in edit mode, values are not getting populated into R/3 System ID and Client. It makes think there is communication error from ID to SLD. How I do confirm if its the real problem?
3) Checked Note 940313 - IDoc adapter: Error messages in SM58, No problem here
4) Did SLDCHECK from PI QA, works fine, no problems here
Both PI DEV and PI QA pointing to the same SLD. When I send IDocs from SAP QA to PI DEV, everything works fine. I can't send IDoc from SAP QA to PI DEV (changed RFC des to point to PI QA, it shouldn't be a problem).
How do I find out if communication between PI QA - ID is workign fine with the SLD? Is there any other issue you can think of causing the above error?
Thank You,
Indrasena Janga

*I have trobleshooted a similar issue. In my case also the tRFC failed with the error "No service for system SAP, client 400 in Integration Directory".There were 11 IDOCS associated with this tRFC and when I saw control record of first IDOC,in sender information ,the sender partner number was wrong.Instead of "SAPSID",it was found as just "SAP".Where as the remaining ten were maintained with correct sender partner number.remaining ten IDOCS were dependant on first one.
Thanks,
Varada Reddy

"No service for system..." after transporting from dev to prod

Similar Messages

Maybe you are looking for