No Service with 3G - 4 Bars with 2G after updating to 2.02

I just updated to 2.02. Standing in one spot I get "No Service" . Changing to 2G in the same spot I get 4 bars. All this will on WiFi. I thought the new software was suppose to increase signal strength.

I am having the same problem. I used to have decent 3g signal with 2.0.1 and now I can hardly connect to 3g with 2.0.2. Also, safari times out when trying to use 3g.
The only way to get it to work is to go into Settings>General>Network then disable 3G and then after it picks up EDGE re-enable 3G. However, after about 20 minutes or less, it stops working and you have to do the reset again.
I didnt have any of these problems in 2.0.1.
Anyone know how to downgrade?

Similar Messages

  • HT1589 problems with itunes after updating..can't locate some of my songs..some have an exclamation point beside them how do i get these songs back in my itunes

    I'm having problems with itunes after updating. I've lost all my playlists,,finally played around with it and got the songs back but some have an exclamation point beside them and can't be located. they are songs i've purchased. I'm not very computer literate so this is a major problem. I have spent hours with this. I just want all my songs to play even though I'm not happy that I have to recreate my playlists. It would be so much easier if I knew and understood how to correct this. Has anyone else had this problem and if so..is there an easy way to correct it?

    Not sure how this is an ipod touch question.
    Perhaps you should post in the itunes forum.

  • Trouble with safari after updating SL 10.6.8

    I updated my OS last night to 10.6.8  and today, in Safari I find that I cannot view amazon.com  When I open a page, much of it is blank.  Anyone else having trouble with amazon after updating to 10.6.8?
    michelle

    (This is a copy of my post in this thread.)
    I updated to 10.6.8 too, was suddenly unable to print to my before perfectly working printer (an HP Color LaserJet CP1515n hooked up to an AirPort Express), and started scouring the web for solutions. The more I tried, the more disappointed and frustrated I became. Then I came here, read about a possible solution in this very thread (the disk image 'Repair10.6.8.dmg') and became hopeful again.
    But alas...
    Sadly, this isn't working for me at all. I ran the script that supposedly fixes the print problems introduced in 10.6.8, but the print jobs still all pause the printer and fail with a 'broken pipe' error. It has nothing to do with the USB cable, as I can print just fine with the printer directly hooked up to my Mac wit that very same cable. I reinstalled the drivers, updated my printer's firmware, ran the repair script twice just to be sure, reset the printing system, even deleted all preference files with 'hp' in the name and having to do with printing, restarted my Mac. All with no result.
    Man, this is so frustrating! Anybody with any other suggestions or possible solutions?

  • I am having problem with iMessage after updating my 5s to iOS 8.0.2

    I am having problem with iMessage after updating my 5s to iOS 8.0.2. I cannot send any text by iMessage anymore. My friend tries to text me and it did not go through

    Hello Huyen,
    Thank you for using Apple Support Communities.
    You can use the following article to troubleshoot Messages:
    iOS: Troubleshooting Messages
    Regards,
    Jeff D. 

  • HT1933 I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 i

    I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 issue ?

    Hi were you able to resolve yours?
    I was very worried losing all my medical stuff on my iPad Air 2, plus i have nothing to use for the next day! So i have to try all the possible things i read on the internet!! And this worked on my part (Thank God, and thank you Google)
    Perform a hard reboot
    Hold down the Home button and Power button on your iPhone or iPad and keep holding them until you see the Apple logo. Once you do, you can let go. When your device boots back up, go ahead and check to see if the apps have started re-downloading. If they still appear to be stuck, continue on.

  • Problem with sound after update

    Hello
    After update to 11.3 I have no bass sound in subwoofer in Firefox browser (youtube). I uninstall the newest version and install previous (11.2) and bass plays ok.
    My os: Windows 7 x64. Sound card Creative X-fi.

    Hello!
    My problem is summed up in this topic.
    Updated Flash Player with 11.3 this morning (june 12th 2012) and since then my 7.1 Sound System works only 2.1. If i enable EAX Effects, works on 7.1 but since it`s just a room it sounds very odd.
    I have no problem with sound on HTML 5 websites for that matter, Winamp, Video Players, games.
    Uninstalled Flash Player, sounds work ok without it on different browsers, other than Chrome (since it has FP built in).
    I hope for a sollution soon.
    Thank you.
    *edit*
    Untill there is a permanent solution, i found a way to deal with my issue and i hope it will help others.
    I personally use Chrome and this is for this browser:
    1. Type "about:plugins" w/o the quotation in the navigation bar.
    2. On the upper right u will see "Details" click it then find the word "flash", and you will see something like this:
    Flash (3 files) - Version: 11,3,300,257
    Shockwave Flash 11.3 r300
    Name: Shockwave Flash
    Description: Shockwave Flash 11.3 r300
    Version: 11,3,300,257
    3. I say again, this worked for me on Chrome. The 3 files i have, two of them are Version 11,3,300,257 and one is 11.2.31.144
    4. Simply disable the lates version 11.3 and enable the previous version 11.2
    I hope this helps.
    Message was edited by: AndrewPAM

  • Black screen with underscore after updating ubuntu on Lenovo G560

    hello everybody, I'm new here. I looked for this problem online during the past few days but I haven't found a solution. I have a Lenovo G560 and I divided my hard drive into two partition, I installed Ubuntu on C:\ and Windows on D:\ and I haven't had any problem, but after updating ubuntu to version 14 my computer couldn't boot anymore. the bios loads and I see the Lenovo icon but then I just get a black screen with an underscore (not a blinking underscore), I tried booting from a bootable USB stick but the same thing happened (I put it as the first device to boot from in BIOS settings). can anyone please tell me what are my other options ? what should I try now ? thanks in advance and have a good day !

    Hi s, and welcome to Apple Discussions.
    Try this:
    Hold down the Option+Command (Apple)PR keys, boot/restart your MBP while continuing to hold down those four keys, and after you hear the startup chime for the second time, release the keys. That should reset your PRAM and resolve the issue.
    If the issue persists, while you're booted into Open Firmware, just after the prompt, type in:
    reset-nvram
    then press return, then type in:
    reset-all
    and press return. This should restart your MBP and it should go back to starting normally.

  • I'm unable to drag mp4 movies into itunes and sync with ipad after updating to 10.5.2.11 version. I'm using windows 7? I was able to in the previous version, why?

    Im unable to drag mp4 movies into itunes and sync to my ipad2 after updating itunes to 10.5.2.11? Im using Windows7. I was able to before this update, why?

    I see same question with itunes not accepting mp4 videos and no answers? Has anyone been able to sort this out or is it a software problem being attended by apple? Please reply?

  • BIG problem with Mail after updating Mac OS X Leopard to 10.5.7

    Hi everyone,
    after updating OS X Leopard to 10.5.7, I noticed that all of my Mail accounts had disappeared. If I try to set them up again, Mail doesn't seem to be able to store them and after quitting and re-launching, they're gone. This had never happened under 10.5.6 or previous OS.
    Strangely enough, only the MobileMe account seems to be stored.
    I tried repairing the permissions, checking the hard disk, re-installing Mail from the Leopard DVD, deleting the com.apple.mail.plist file. Nothing seems to work so far.
    Any suggestions? I haven't been able to use Mail for almost a month now. I used to have 6/7 accounts and I can't stand having to check their web-based version. I want Mail to work as it always has!

    Rest assured it doesn't happen to all Macs with 10.5.7. I'd start a new topic thread here:
    http://discussions.apple.com/forum.jspa?forumID=1223&start=0
    You'll get a wider audience, and won't confuse the original poster with solutions that don't apply to them.

  • Problem with iphone after update

    Hey guys, I am having a bit of bother with my iphone. Basically i was given an iphone 3g and I'm not really sure where it came from but it had a vodafone sim, I am on an orange contract so i took out the vodafone sim and put the orange one in and to my surprise it worked,  it has been working fine for months but tonight I decided to do an update on itunes and now it is telling me that the "sim card in this phone does not appear to be supported" and and my phone is stuck on a screen with the usb cord and the itunes logo telling me to connect it, also i can only make emergency calls. What on earth have i done? I no longer have the original sim so cant use that to activate it
    Is there any way to fix this? I had no idea doing an update would cause this trouble and atm my phone is useless.
    Any help would be very much appreciated,
    Cheers
    Tors,

    The problem also appeared for some people after updating to 7.0, and for some after updating to 6.1.3, or 6.1.2, or to 5.1, 5.0, etc. and some first saw it without updating at all. Which argues against it being a software problem with 7.1 specifically.
    Restore your phone using iTunes and set it up as a new phone. It you still have the problem it is a hardware failure.

  • Has anyone had trouble with safari after updating to ios 8 on ipad

    I am having trouble viewing a web page through safari after updating to ios 8 on my ipad.  On the left side of my screen is a list of my favorites leaving only 3/4 of the screen to view a web page.  Before the ios 8 update when I clicked on the safari icon it took me to a full screen view of my favorites with icons.

    Same issue here, seems to be fine on text based websites, but any with images on struggle to load.
    im on 100mb fibre, and all sites work fone on other devices, just my iPad since upgrading
    its loads the site slowly, displays about 3/4 of the page once loaded

  • Problem with camera after updating z1 to 14.5.A.0.270

    Hello
    I'm facing a problem after updating my Xperia Z1 to 14.5.A.0.27, I.e. Lollipop 5.0.2.. problem is with the camera, when I tried to capture a picture with auto flash/flash on, a bright light is appearing on the lower portion of the image. Plz help to overcome this.. Thnx in advance
    Solved!
    Go to Solution.

    Ca you please test the same pictures with flash and without the case?
    A proud Sony User since 2002
    If I was helpful to you, thank me by Kudos

  • TS1702 Has anyone had any issues with the app scramble with friends after updating to iOS 6. The touch screen is not responding properly when selecting the tiles but worked fine before the update

    Has anyone had an issue with the app scramble with friends after upgrading to iOS 6. Tapping the screen will not select the tiles and hold them.

    Yes I am having the same problem. I can't find any info about it and nothing seems to help. I am just posting this in hope that if it's a wider problem, there will be a quick solution.

  • Problem with k810i, after updating

    hello, after updating my phone, k810i  when i start it a message appears that i should insert the correct SIM card.What can i do

    That sounds like the phone was patch unlocked previously. All you need to do is:
    Download Omnius from here http://www.omnius-server.com/download
    Then register here http://www.omnius-server.com/register_app
    Then open Omnius and click settings and then server settings
    Then with the username and password you registered with enter your details  accordingly.
    Then select K810 from the drop down list
    Then click unlock
    Then select unlock network lock by reset
    Then select the original certificate and follow the on screen instructions.

  • IOS 8.1.3 problems with email after update

    Hi i have problems accessing my email accounts after update to iOS 8.3.1 , I tried to delete all accounts but I still have the same problems.

    Hello, so, I was having the same issue including my memory showing 0 GB available. I tried all of these suggestions and couldn't make it work, here's what finally worked for me:
    on your Iphone, Go to Settings > iCloud > Find My Iphone and Turn it OFF.
    That worked for me and now shows the free GB I truly have left and no longer have issues with my email. Hope this helps if it does please let me know and pass it along.
    Thank you :-)

  • Problems with Audio after update to Firmware 2.1

    Dear Blackberry users
    Im using a Playbook SN 1344-6061-5356. After update to firmware 2.1.0.1753 the audio function is not working if I am connected with USB speakers.
    Pairing is okay, but the audio stream comes with no volume.
    Urgent help would be welcome . Thank you.
    Clemens Heddier/Germany

    I dont have my BT gateway with me but will test tonight.
    Have you tried removing the pairing and pair it again?
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Maybe you are looking for

  • HOW TO DUBUG BACKGROUND JOB?

    1)HOW TO DUBUG THE BACKGROUND JOB? 2) HOW TO DEBUG THE BACKGROUND JOB WHICH IS ALREADY RUNNING?? CAN YOU PLZ REPLY TO THE ABOVE TWO QUESTIONS....??? URGENT... THANKS IN ADVANCE SRI

  • Displaying document title based on category

    hai all, i want display document title based on document category, what is the field to display doc title for invoice description of freight terms should be displayed based on vbrp-kvgr1, i am not able to find the field Edited by: kpsgoutam on Aug 27

  • Qosmio X500 - How to increase the screen resolution?

    Hi, Does anybody know how to increase the screen resolution? My qosmio X500 is 1920 x 1080 and I want to raise it to 1920 x 1200. Thank you/Red

  • How to easily migrate to another user

    Due to incredibly long SBBOD for anything I do, I am forced to find a solution that would really rather have my teeth ripped out with any pain killers before I attempted. I believe my user account is corrupt, and I should everything over to a new one

  • Need help configuring Airport Express in my home observatory

    Hi Is is possible to use my Airport Express (newest version) ethernet port to connect my Vixen Sphinx Mount which has a port to my home network to control using my computer? If so how should I configure. It is currently extending my network. Thanks H