No Services After Windows Install

I just finished a distributed install with a web tier box with only the plug-in and the app server box with everything else. My problem is that I don't have any services listed for any of the "Oracle BI" components. The only thing listed is the opmn process manager from my 10.1.3.1 J2EE/HTTP Server install.
Any thoughts on how this could have happened or if there is an easy way to recreate the processes manually.
Thanks
Matt

Hey guys, I'm just coming back to this, I've been playing with the security stuff lately and forgot this thread. I think it was everything except the web presentations services that I was installing. I'll go back through my customer notes and find out. It was a Win2K3 Server machine with all the latest patches.
And yes Aydin, its been a while since we talked. I'll give you a call sometime soon and catch up.
Matt

Similar Messages

HT201394 i lost cell service after i install IOS 8 on my iPhone 5s

i lost cell service after i install IOS 8 on my iPhone 5s
i update to 8.02, cut still same
please help

Hello there, jjthurlow.
The following Knowledge Base article offers up some great steps for troubleshooting issues with touchscreen response:
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
If your device is experiencing any of the symptoms listed above, try the following steps:
Restart your device
Hold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
If you can't restart your device, reset it by pressing and holding the Sleep/Wake button and the Home button at the same time for a least ten seconds, until the Apple logo appears.
Clean the screen with a soft, slightly damp, lint-free cloth.
Avoid using the device while wearing gloves, with wet hands, or immediately after applying hand lotion.
If you have a protective case, or if you are using a plastic sheet or film on the display, try removing them and testing the device without it.
If the steps above don't resolve your issue, please schedule a service appointment with an Apple Retail Store for evaluation. If an Apple Retail store is not an option, contact Apple to find out your best service option or see the Service FAQ for your product.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Share in Safari shows No Services after Yosemite install?

I am unable to use the Share feature in Safari like I did before the Yosemite install. Under File and on the Task bar it is showing No Services. I checked every setting under Safari preferences and also System Preferences, no luck. Any suggestions? My friend has updated to Yosemite of his 2 laptops and does not have this issue. I am using a iMac (mid 2011)

To Restore Share Options
Open Macintosh HD > Applications > Utilities > Terminal > Copy and paste in the following:
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/Support/lsregister -kill -seed
> Press Return > Close Terminal App.
Hope that helps,
Weston
Supporting Article
If sharing options and Markup are missing after you install OS X Yosemite

RAID after Windows install on Z77A-GD65

Hey guys,
I've been looking around for a long time for a clear answer, but can't seem to really find one. I got three 3TB disks that I want to run in RAID 5, but I already have Windows installed and don't want to reinstall it.
I've read a lot about doing it via BIOS and UEFI not working properly or needing a lot of work before it works correctly, but no conclusive results or guides on how to do it. I've read and tried a few of the online guides that include registry changes etc., but none of those seem to work. I really just want to get the array working. If it's really just not possible, I wonder if it's possible to do when I install a new Windows (probably W10 by then), because again, I read stories about that and it's supposed to be possible, but the descriptions are too vague.
So, is it possible to RAID 5 my disks IN UEFI after installing Windows?
Thanks in advance!
Boeman

Is the windows installation on one of these disks?
RAID 5 needs initialization before it is first being used so it isn't possible to keep windows if it is on one of the disks being RAIDed.
I remember there was a way to change SATA mode from IDE to AHCI or RAID on the P45, but last experience I had with transferring windows(XP) from one disk to another with ghost did not work well. It did boot but network was disabled and Microsoft assistant told me I must reinstall windows.
There was also a procedure to migrate windows between different platforms for windows XP, but you had to "repaire" installation (rather clean Install) which is almost like clean Install without reinstalling other software.
Best start fresh as suggested by Nichrome, shortcuts always result in wasting more time.

Cannot Start BW Publisher Service after IK install

I installed Integration Kit for 3.0 on a XI 3.0 deployment. After the installation, I was unable to start the BW Publisher Service. I also do not see the SAP Authentication drop down in CMC.
I followed all the pre-reqs.....any idea what could be wrong? How can i troubleshoot this?
Thanks,
Kashif

These are the steps I took:
Pre IK Installation steps
1. Extracted the contents the SAP Java Connector 2.1.8 into a folder on the server.
2. Since the SAP GUI is already installed, the file u201Clibrfc32.dllu201D should already be present
in the u201CC:\windows\system32u201D folder. Rename this to u201Clibrfc32.dll.oldu201D and copy the
new one from the folder in step 1.
3. Copied the u201Csapjcorc.dllu201D file from the folder in step 1 to the u201CC:\Windows\system32u201D
folder.
4. Copied the u201Csapjco.jaru201D file from the folder in step 1 to the u201CC:\Program Files\Business
Objects\TOMCAT55\common\libu201D folder.
And added to the Java ClassPath in Tomcat. Then I installed the IK.
I assume the SAP Kit is installed ?
Yes.
Did you deploy the SAP Java Connector files ? (32bit)
If deploying means what i mentioned above, then Yes.
can you see a folder "SAP" in the webapps folder from TOMCAT ?
No.
Thanks for your help!
Kashif

Can't boot into Mac OS after Windows install via Bootcamp

Hello.
Last night I installed Windows 7 on my Macbook Pro early 2011 via Bootcamp.After some major complications I was able to finally install Windows 7 and boot into it. Now I can't boot back into my "Macintosh HD" partition, it shows a no entry sign.
Hard Disk : 320GB Internal Sata
Partitions : 3 -> Mac, Bootcamp and 10.8 Recovery Partition
The good part is that I can still access the Mac OS partition in Windows and Windows is working perfectly fine. As a matter of fact right now I'm on the bootcamped windows.
I have a full time machine backup but still I am looking for a way to solve this without formatting the HDD.
Things I have tried:
1. Resetting NVRAM and PRAM
2. Booting into 10.8 recovery partition and running DU.
SMART Status : Verified
"Macintosh HD" grayed and Not Mounted
Successful Verify Permissions (Twice)
Is there a way to solve this? Though the Mountain Lion partition shows when I press the Alt/option key on startup but I can't somehow boot into it.
Thanks

Your problem is OS X is refusing to boot.
There is still a bootable volume on the Macintosh HD partition, it's just not working.
You can #8 Reinstall Just OS X while command r booted from the Recovery partition, as long as you don't use Disk Utility to erase the Macintosh HD partition, your files and programs remain.
Hook the computer via Ethernet cable to a router (or modem, power reset required) with a fast relaible internet connection, you will need your AppleID and password to reinstall OS X.
Step by Step to fix your Mac

Boot Camp: Mac Pro won't start after Windows install

After installing Boot Camp on a Mac Pro dual 2.66 (firmware updated), XP installer went through installation & copying files, then restarted. Went to a black screen with white Windows-style text that said something along the lines of "XP cannot start from this CD, press any key to restart." Totally unresponsive, held down power to restart. Will no longer power up. Have reset the SMC without any effect. Makes a brief sound when trying to start, but does not actually start up.
Is there any known power issue that I might be able to solve myself, or is the supply likely blown?
Mac Pro Mac OS X (10.4.8)

I put Vista on its own dedicated drive, 64GB Vista, the rest as FAT32 to make it easier to share files. I had to remove the OS X drives in order to allow Windows/Vista to install. Once installed, had a black screen and some blue crash screen, until I ran the BootCamp driver updates.
I would try unplugging your drive(s) first and see if you boot from Tiger Installer DVD - or better, boot Apple Hardware Test (hold down "d" on startup from Install Disk #1).

Cannot start the SQL server service after you install Active Directory

Good Morning,
Im the system admin for a small company. We have a dedicated domain controller but it is the only one. To get a second domain controller up and running on our domain, I installed the AD role on our file and SQL server. After the reboot
we couldnt get SQL up and running. I found this article
http://support.microsoft.com/kb/929665
In the article it reads
To work around this issue, repair Windows Internal Database. To do this, run the following command line at a command prompt:
Msiexec /i SSEE_10.msi CALLERID=OCSetup.exe REINSTALL=ALL REINSTALLMODE=omus /qn REBOOT=ReallySupress /l*v <var><Log_File_Path></var>
My question is what is the Log_File_Path? Is that where I installed the AD log path?
My DBA is also looking into this as well.
Thanks in advance,
Brian
Brian Fink, MCSE

Hi Brain,
what's version of SQL Server that you have installed and what's your operationg system version info?
If you are running SQL Server 2008, which is not supported on the Windows Server 2008/2008 R2 domain controll (DC), even on Windows Server 2003 DC, there are limitations. Microsoft does not recommend to install SQL Server instances and DC on the same server,
for more information, see Install SQL Server on a Domain Controller (http://msdn.microsoft.com/en-us/library/ms143506.aspx#DC_Support).
There are some threads in the forum talked about installing SQL Server and DC on the same server, here are some for your references:
http://social.technet.microsoft.com/Forums/en-US/sqlsetupandupgrade/thread/1a2963ff-90d7-4bba-97ce-fa15f70fb6a8/
http://social.technet.microsoft.com/Forums/en-US/sqlsetupandupgrade/thread/981ef726-d04a-4063-8008-cc7bbad854ab/
Hope this helps. Please feel free to let me know if you have more questions.
Best Regards,
Chunsong Feng [MSFT]
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How to open MAc os after windows installed

hi
today i install windows 7 ultimate in my 27\ iMAC after i cant open MAC OS what to do

You didn't say how you installed MS Windows so I'm going to assume you followed directions using Boot Camp. If that is correct then restart the machine when you hear the Startup Tone hold down the Option key and choose the volume that has OS X installed on it.
If you did not use Boot Camp then please restate EXACTLY how you installed MS Windows.

Battery not detected after windows install. Batteries tab missing in device manager too

My eM250 still charges fine but I have no way to see how much juice I have left. no after market meters or anything like that has helped. How can I fix such an odd problem?

iluvwhtchix,
I've looked at the quick start and service guide and do not see a standby button, what am I missing? LoL
It just sounds like there are some drivers that did not install, was this with the media that was sent from eMachines? There might be a drivers disc that could resolve the issues, if so. You can always go check to see if you have the right drivers on our eMachines support page.

Remove or reduce Mac OS after Windows install

This may be an odd question, but first a little background.
I bought the 2011 MacBook Air as my first introduction into the world of Macs and thought it would also fulfil the occasional work duties due to the promises of how easy it is to integrate a Mac into a PC world since MS Office is available on both platforms. For personal use Mac OS has been a breath of fresh air, intuitive gesture support makes browsing and editing photos fun again as well as playing around with using it as a media server, and Keynote has taken over for my presentation needs.
However working as an accountant means MS Excel, Outlook & Sage are central to my working day and due to various incompatibilities in the office, such as Mail & Outlook 2011 failing to work with our office's 2003 exchange server for one, and MS Excel 2011 being very much the poor cousin to Excel 2010 I ended up setting aside a 64Gb (of 256Gb) partition via Bootcamp to run Windows 7.
Little did I expect how good a Windows PC the MacBook Air makes! Maybe it's the SSD drive but this thing easily lives up to the top of the range i7 HP desktops we use in the office so rather than using the Windows partition for the odd bit of remote working which was the plan two years ago, it is now my main work computer. In fact after I added a couple of Displaylonk adapters I now have a four screen set up (3 x 22" 1080p Dell monitors plus laptop screen) which is the envy of the office.
So, I've since replaced my personal Mac needs with a quad core Mac Mini and haven't booted into Mac OS on the laptop for months and as you can probably guess but that 64Gb is running out quite fast.
I know I can't simply resize the partitions without causing possibly major future headaches and all this MBR/GPT/EFI stuff is unfortunately a little over my head so don't want to do anything crazy (like formatting the Mac OS partition which I've considered) without first getting some advice.
I don't really fancy wiping out the Bootcamp installation and starting again if at all possible, and don't mind keeping Mac OS around but I know that it is highly unlikely that I'll ever need it again on my Air and would probably jump for the MacBook Pro if I ever did need a portable Mac again.
Any help would be greatly appreciated :-).

Thanks guys, so I guess that means formatting the Mac partition from inside Windows definitely isn't a simple option then.
So... this leaves me with a couple more questions I'm afraid.
Firstly, I've read that Camptune can cause issues later down the road as it doesn't update the partition tables fully (or something?) which can lead to the possibility of losing Bootcamp later on - but that may only be when updating OSX, which is something I don't really plan on doing so may not be an issue for me?
and Secondly, how easy is it to completely purge OSX?
I can't risk losing access to Windows for any length of time as my work life has become ridiculously hectic lately. So I can't really risk trying this until I have had chance to set up another PC as back up just in case something goes wrong. However with space rapidly becoming a premium on the Windows side it is a case of time is running out.

Server failing to run multiple services after Windows Update ran last night.

SBS 2011 Server was restarted to complete installation of 8 critical security updates last night. A number of services all dependent on RPC Service will not run today. I uninstalled all the updates and restarted Server but still have the same problem.
This is a real estate law office and they have no printers or E-mail today. RPC Service reports as started but all services that depend on it fail to start. I've attempted to troubleshoot the problem but I am not getting
anywhere. Any suggestions on best way to resolve the problem?

Hi,
What is the status of RPCSs Service , is it started , Automatic and running on NT AUTHORITY\NetworkService ?
Find Default SBS 2011 Services status here:
http://blogs.technet.com/b/sbs/archive/2011/07/13/default-services-and-their-status-in-sbs-2011.aspx
Open Registry HKLM\System\CCS\Services\RPCss , could you please share the DependOnService values ?
Make sure there is only NIC card enabled on the server with DNS pointing to itself.
Disconnect the Network Cable and reboot the server once.
Do an MSCONFIG , clean boot the server , including Exchange Services.
Try to boot the server in Safe Mode also try Last known Good configuration, just for troubleshooting.
We might have to try changing the Logon As in service for RPCss to Local System as a test. (BUT THAT WOULD BE LATER)
Binu Kumar - MCP, MCITP, MCTS , MBA - IT , Director Aarbin Technology Pvt Ltd - Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Restoring library after Windows install

I reinstalled Windows on my PC. Rather than restore the library from backup, in iTunes I selected added folder to library. This imported all my audio files. I have since downloaded additional songs as well.
Some of the songs previously had start and stop options settings. Now they reverted back to 0:00. I don't know what else is different.
What would happen now if I overwrite the library files?
Thanks.

It should go back to the way it was with the ratings, play counts, etc.
I think the start/stop times would be back in place, as well.
Easy enough to try, anyway!

MARS - NFS on Unix Services for Windows and deleting files

Hello !
I've prepared NFS server on W2k3 server with Unix Services for Windows installed. It works OK, the only problem is moveing/deleting files and folders. It seems like a problem with permissions for anonymous user. Does anybody have similar experience ?

If you receive the following error message "Error ./pnarchiver Thread 2051:PN-0102:SQL error: ORA-01005: null password given; logon denied" then there is a Problem with archiving to NFS server. The directories for the archiving are properly created on the server but those directories remain empty. The workaround is that an inter operability issue exists between MARS and CygWin NFS server running on Windows 2003 server. To work around such inter operability issues, replace the NFS server with Microsoft Windows Services for Unix.

XE service lost after windows server 2003 restart - must start repair

I have a problem with Oracle XE 10g on Windows 2003 SP2.
Installation went fine, I could use database, go to home page, add tables, views, functions etc.., link database to sql server and query tables from several sql several sql servers on the network etc.
In general everything was fine, but...
After windows 2003 restart XE service does not start, db home page is not accessible and
lsnrctl stat
is giving me:
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 25-RUJ-2009 22:46
:26
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(OVO NE RADI) (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR
_XE))(ADDRESS=(PROTOCOL=TCP)(HOST=sql-server-test.ie.local)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 25-RUJ-2009 22:45:56
Uptime 0 days 0 hr. 0 min. 30 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\a
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\l
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sql-server-test.ie.local)(PORT=1521)
)(OVO NE RADI) (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
There is no sign of XE, XEXBD nor XE_XPT service.
I restarted installation and performed repair and everything went back to normal.
After repair
lsnrctl stat
is giving
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 25-RUJ-2009 23:11
:40
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(OVO NE RADI) (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR
_XE))(ADDRESS=(PROTOCOL=TCP)(HOST=sql-server-test.ie.local)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 25-RUJ-2009 22:45:56
Uptime 0 days 0 hr. 25 min. 44 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\a
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\l
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sql-server-test.ie.local)(PORT=1521)
)(OVO NE RADI) (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=
HTTP)(Session=RAW))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "xe" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
The command completed successfully
After repair all is good but I must not restart server.
If I do this the story repeats itself.
No XE, XEXBD etc services, no access to database nor to homepage.
Starting install/repair - everything works. After restart same story again....
I could not find the way to aviod constant repair after restart.
Is there any way out of this?

Thank you for the response.
But the problem persist.
The lsnrctl dont recognise the XE service. The OracleServiceXE is up and running.
D:\oraclexe>lsnrctl services
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 12-OCT-2009 12:55
:48
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
The command completed successfully
listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = D:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST =localhost)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
tnsnames.ora
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
XE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST =localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = XE)
(SRVR = DEDICATED)
)

No Services After Windows Install

Similar Messages

Maybe you are looking for