No shadow on Livetype font after importing on timeline FCE

Hi,
I made some basic titles in Livetype. The font has a shadow in the Livetype-project.
After rendering the titles the shadow is still there. Even after importing the titles in the browser of FCE, the shadow is still there.
But when I drag the titles to the timeline of FCE, the shadow suddenly disappears! How come?
Thanks in advance for helping me out.
O.

Also strange is this:
When I open and play the rendered titles from within the browser in the viewer of FCE the shadow is still there. But when I pause the titles, the shadow is gone.
Once I import the titles in the timeline of FCE, the shadow disappears completely.
Olivier

Similar Messages

Itunes does not play after importing into timeline

I have looked at similar topics in this discussion forum but still unable to get the answers.Basically the problem is that after importing (purchased) itunes(6) music(and it imports OK)there is no music when played back in the time line.In the imovie palette (audio view) the itunes music plays normally.CD is also greyed out even if there is a CD in the CD drive,so obviously CD tracks cannot be played.Itunes 'by itself' plays normally and CD is also recognised.Voice overs thru microphone,original audio from footage also plays normally.All boxes ticked on the right/computer volume set to high etc so setting seems allright.I am using formac studio to import analogue footage and can hear the original sound when importing.Using imovie 3.03 on ibook.this may/maynot be relevant-on the G3 imac in imovie(3.03)the itunes/CD tracks imports and plays on the timeline,however the original footage soundtrack sounds like gunfire from a machine gun.It is normal with the imported itunes soundtrack switched off.
Grateful for any thoughts/adv
rav
ibook 800mhz G4,imac 400mhzG3 DVSE Mac OS X (10.3.9)
ibook 800mhz G4,imac 400mhzG3 DVSE Mac OS X (10.3.9)
ibook 800mhz G4,imac 400mhzG3 DVSE Mac OS X (10.3.9)
ibook 800mhz G4,imac 400mhzG3 DVSE Mac OS X (10.3.9)

Hi rav - are you sure that if you have a CD installed you cannot see its tracks in the Audio Pane? Even though 'Audio CD' is greyed out, the contents of the CD are still there and accessible.
Can you convert the track to mp3 format? iMovie does accept mp3s. Doing so might break the deadlock.
Sorry, I can't help with your other audio issue.
G5 Dual 2.0 ghz Mac OS X (10.4.3) 1.5 GB RAM; VidCam: Sony DCR TRV80E

Unexpected Audio Dropout After Importing MP3 Into FCE-HD

I've imported a song into a FCE-HD project, but after rendering it, I keep hearing tiny breaks in the music. I went back and played the original mp3 in iTunes... perfectly clean. I'm up against a hard deadline today. Any ideas?

Matthew
Mp3 is not the format FCE likes.
Use iTunes to convert the song to aiff format that has the same audio rate as the FCE sequence. That's either 48 or 32 kHz.
Al

Titles off center after import into FCE

I seem to always have to adjust the position of my titles after importing them into FCE because they are off center. They are centered in LT and I have tried changing the project properties to different video formats, but they continue to be off to one side after import. This occurs both when I import the .ipr file into FCE and when I render the movie and import it as a .mov file. Any suggestions on how to have the titles show up where I designed them in LT?

I am not sure if they are always off the same number of pixels, but they do always seem below center and off to the right. Could it be that I am using the incorrect project preferences? I am using Captured DV footage in FCE and I have tried both NTSC DV 3:2 and NTSC 4:3 and I still seem to have the problem.

All of a sudden my RAW (Nikon D7100) files are dark after importing

Could anyone tell me why all of a sudden my NEF files from my Nikon D7100 raw files turn dark after importing them to Lightroom 4.4? I did use Dactive lighting setting in camera...is this why? Is there anyway to stop this from happening? THanks!

dj_paige wrote:
I would turn off the D-active lighting
I can't argue with that.
dj_paige wrote:
it does not help eith raw images.
That would be truer if stated thusly:
Having ADL on will make for darker initial rendering in Lightroom and reveal non-optimal ADL setting as under-exposed images.
However (and contrary to popular belief), that does NOT mean there is no value using ADL in conjunction with Lightroom for post-processing - quite the contrary: there are ALL the same benefits as when using ADL in conjunction with NX2, *except* that the compensations are applied automatically in NX2, and non-optimal setting manifests as a slight reduction in shadow image quality and not as under-exposed images when using NX2 instead of Lightroom for post-processing.
Rob

Editing After Import

Hi there, I am curious as to the extent or no extent of the
editing capabilities after one imports a PPT in to Captivate. Once
of my developers says it is pretty much non existent and that all
edits should be done in the PPT file including adding audio and
then re imported. Is this the case?

Based on my experience with Captivate 3 and the advice
presented in this forum, I shall attempt to translate:
quote:
Your developer is right. Whatever you import from PowerPoint
will end up as either a static image or an animation you can't
edit.
Well, if you have image editing software and know how to use
it, you can make edits to the background images that get created.
While Captivate is able to import Powerpoint files the
validity of colors, audio tracks, object placement, et. al., are
all up in the air in terms of if the imported file bears even a
passing resemblance to the original document.
(Oh, also, good luck exporting from Captivate, especially if
you attempt to export to Flash)
quote:
But if you have perhaps four bulleted sentences, you won't be
able to edit the text after importing into Captivate. If a sentence
needed to be changed, you would need to edit in PowerPoint and
re-import if you wanted it in Captivate.
Even simple tasks, such as editing text, are beyond the scope
of Captivate. Speaking of bulleted text, be aware that using a
bullet will disable anti-aliasing for the rest of the text field
making the font practically unreadable.
quote:
Hopefully this helps... Rick
Adobe has released a half-finished product which hopefully
upon the fourth iteration of the product will feature "advanced
features" such as import, export and text editing.

Can not refresh snapshot changes after importing data of master site

Hello !
I have two database computer,one as master site,one as snapshot site.Because the error of the hard disk of master computer,I use the exporting data file to recover my database.after importing ,I found I can't refresh the refreshgroup on snapshot,who can tell me why?
thinks in advance!
(exp system/manager full=y inctype=complete file='/home/save/backdata/xhsdcomp.dat')
(imp system/manager inctype=system full=Y file='/home/save/backdata/xhsdcomp.dat'
imp system/manager inctype=restore full=Y file='/home/save/backdata/xhsdcomp.dat')
null

You haven't listed the errors that you're receiving when attempting to refresh your refresh group, but if your snapshots are attempting to fast refresh, I suspect it's because the creation timestamp of the snapshot log on the master site is newer than the creation timestamp of the snapshot. In this case you will need to do a complete refresh of the snapshot (or drop and recreate the snapshot) before you will be able to fash refresh it again.
If this is not the case, please post the errors you are receiving when you attempt to refresh the refresh group.
HTH,
-- Anita
Oracle Support Services
null

Apex Application not working after importing to my apps schema...

Hi friends,
I created one DB application in my sample schema that is associated with apex 4.0.....
Application details:
*) login page(where i will be giving username and password)
*) page 1 (consist of several form fields, like
--->name:
--->module:
--->projects:
----->email:
the above are the fields, if i put any entries in the above field means, it will get automatically inserting in the report column, which is also in the same page consist of the above fields in the table manner...
since this report table consist of an edit icon in front, if i clicked the edit icon of an one row means, it will go to another page..
*) i.e. page 3(consist of the same fields with entries in it automatically corresponding to the each and every row, suppose if i want to update any changes means i can update in it....
this is my application that i developed it is working well with in the sample schema apex 4.0..
What i did is i created a new workspace with APPS schema in it...and i have imported my application that i developed in sample schema to APPS schema....
Since after importing to APPS schema...when i tried to open the application, it is not showing any datas in it...That is due to the tables that are supporting the application is not in APPS schema, so what i did is i have given grant privilege to the respective tables and also i have created a synonym for accessing the table in APPS schema for supporting the application.....
Now if i tried to put any entries in the form in page 2, it is getting inserting in the report column which is also in the page2....
But my problem starts here, if i clicked the edit icon symbol in each and every row of the report column it is going to the page 3 which has a respective form fields, but it is not showing any entries in it automatically, and if i tried to put any entry in it, it is not getting updating in the report table......
why this problem occurred for my application in APPS schema....But my application works very well within the sample schema......why it is not showing any entries in the form automatically soon after i clicked the edit icon in each and every row.....
i couldn't know what is the real problem behind this..... help me friends.
As this is my urgent requirement in my project..Reply me ASAP...
Thanks in Advance..
Regards,
Harry...

First, try a system reset although I can't give you any confidence. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Problem on CLOB datatype after import

I got problem and call to Oracle support and they use DUL for extract data from datafile to dump file and I import everything is done and no error but when I check in CLOB datatype that have space(blank character) separate each character see below
Original
Oracle
After Import
O R A C L E
So the application cannot execute those data.
Anyone have solution how to fix this problem?
Thanks,
Taohiko

if you use a direct insert you are restricted to 4000 characters.
You can put your value in a varchar2 variable and that allows you to insert up to 32767 characters.
declare
my_clob_variable := rpad('x','X',25000);
begin
insert into my_table(my_clob_column)
values(my_clob_variable);
end;

My imported backup html files from another computer do not show up after import

I am currently transferring files from my macbook pro to a pc netbook. I already exported my firefox bookmarks via an external drive and accessed the html file on my new netbook. After importing the html on firefox on my new netbook, the bookmarks do not show up on my bookmark list.

Please see this article on how to move your bookmarks and settings from one computer to another: [[Moving your Firefox bookmarks and settings]].
Caution: Restoring bookmarks from a backup will overwrite your current set of bookmarks with the ones in the backup file.

Cannot edit chapter names in iDVD after importing movie from iMovie

I have no trouble customizing iDVD (version 5.0.1) menu page after importing iMovie directly (instead of going to QT as interim step). But the names of the chapter markers are file names for video clips, title pages and transitions. The iMovie help says to change the names in the space next to the 'thumbnails' of chapters found in iDVD. THERE ARE NO THUMBNAILS. And there is no way I could find, using menu options or clicking on the chapter frames shown in 'map' mode to type in anything.
There are other problems, like getting rid of the default "Travel Cards' stuff...like I can drop a still photo in for a custom background, but the default 'celluloid design' banner still rolls up in previw mode. If you can also help with that, great. But the main thing right now is getting these chapter names change.

VJK,
You are the third person who has taken a crack at this. I don't know if you read my last reply which detailed the situation. But if you did and the 'menu' you refer to is the main menu page, that is not the problem; I can change text there. I am talking about the submenu for 'Scene Selections', which I have only been able to access via map mode.
In map mode I cannot highlight the names. Period. Can't do it no matter where I place the cursor or carefully click.
In preview mode, when the Scene Selection sub-menu page appears whenever you drag the cursor over a chapter name it automatically highlights so any clicking will either do nothing (if a real careful click, trying to highlight text and not trigger off play of the movie chapter) or just start play for the movie chapter.
So...how does this newbie get to the 'menu' you mention where I can click on a chapter name in order to type new text?
You will be able to change the names in the menu, but
depending upon your mouse, etc, it can be a little
particular.
Place the cursor at the very beginning of the word
you want to change. Click once .. this should hi-lite
the word. Click again, it should make the word go
blue (or in a blue box) then you can delete and
re-type.
Be sure to save the proj
I have found that even after saving and successfully
burning the project, if I return to it later the
changes seem to have gone away ... so if you go back
to it later, just double check that everything is
kosher

How do delete photos from iphone after import to new photos app?

With iphoto (or aperture which I own), after importing photos I was always asked if I wanted to remove the photos's from my phone. With the new photo's app I don't get that option, and I certainly don't want to delete 1200 photos by having to individually select each one on the phone. Any ideas?

You should ask on the forum that Apple told you to use for Beta software discussions. This isn't the place. The moderators will likely soon remove your post.

Spoken work files will not play even after importing/converting?

I have some audio files recorded on my Android phone with the basic recording app and the files play when I press the spacebar to preview them in Mavericks. However, after importing them into iTunes using various import settings, including the podcast spoken word ones, they just will not play. When I double click on the file it looks like it is about to play, the apple icon at the top switches to what looks like a progress bar, though it is different from other tracks that do play, and then it immediately switches back to the apple icon and does not play.
Any ideas of anything I can do?
Thanks.

I've found an issue with movies when the audio is IMA format. Is that the format of your audio?

Could not able to see my customized BP after Importing

Hi
I am using Standard Business Package for SAP CRM4.0 60.2.3; it is stored in PCD -> Migrated Content
I customized the Business Package and stored the content in my folder and transported the Business Package to Local (on Desktop) and Server (in server: C:\usr\sap\J2E\SYS\global\pcd\Export).
I did not deleted the Standard BP from PCD/Migrated Content
After importing the Customized Business Package from local system i could not able to see the Business Package in PCD.
I could not able to see the Customized BP in PCD.. , Whether that Standard BP should be deleted before Importing
What is the Default location it stores after importing?
Plz help me to solve this issue its very urgent.
Regards

Hi Sanjay,
There is no need to delete the Standard BP from PCD/Migrated Content.
After customizing the business package and storing the content in your own folder, you have to add all objects to new transport package(by right clicking on main folder)then export it and download the epa to your local system.
After importing the epa in some other portal, BP will sit under same path you have specified while creating business package(PCD).In sense, it will create the same PCD structure when you import epa in some other portal.
You might have done some mistake while creating transport package and exporting it to your local system. You might not have added all object to new transport package.
Hope this is of some help. Do write back in case you need further clarification
Cheers
Ruchi.

How do I eject iPhone after import to iPhoto?

How do I eject iPhone after import to iPhoto?

You don't need to eject the iPhone after importing, if it has vanished from iPhotos's source list in the sidebar. Then it has been dismounted.

No shadow on Livetype font after importing on timeline FCE

Similar Messages

Maybe you are looking for