No show in airport utility

I just noticed my newer extremes don't show in the airport utility (older extreme and expresses do), I have version 5.2.2 and have leopard installed.
I note in other threads some are having trouble seeing the airdisk. I can see and use the airdisk and all my my wifi macs/wifi tv's/wifi security cameras and wifi printers can see and use my newer extreme wifi networks.
Since everything seems to work just fine I don't want to tinker unnecessarily but I wondered if anyone knew what gives.

Thanx for that, suspected as much, but as I say I don't want to tempt fate by tinkering when all else is well.

Similar Messages

USB Drive not showing in Airport Utility

I have a USB HD formatted with Mac OS Extended (journaled) which I plugged in to my Airport Extreme and it does not show in Airport Utility. Any ideas?
Thanks,

Power off the entire network
Wait a few moments
Start the modem first and continue starting devices one at time until everything is powered back up
If the drive still does not show up.....and you are not using a powered USB hub....that may be needed
Other stuff....verify that the USB cable is working correctly

I have airport express but it is not recognised by either my macbook pro or my ipod on my wireless network. It does not show in airport utility. Might I not have an airport card?

I have airport express but it is not recognised by either my macbook pro or my ipod on my wireless network. It does not show in airport utility. Might I not have an airport card? How would I know. Airport utility in my mac says no other devices connected.

I have airport express but it is not recognised by either my macbook pro or my ipod on my wireless network. It does not show in airport utility. Might I not have an airport card?
If both your MacBook Pro and iPod are unable to "see" the Wi-Fi network provided by the AirPort Express, it is most likely NOT that you are missing an "airport card," but the Express may be the issue instead.
One quick test is to see if either device can "see" other Wi-Fi networks. If they can, then you can definately rule both of them out as the issue.
By default, the AirPort Express will broadcast an unsecured Wi-Fi network with a network name of something like: Apple Network NNNNNN. Can either device see this network? If not, then I would recommend that you perform a "factory default" reset on the Express, and then, check again.

Since latest update to airport extreme im getting 10 unknown base station and time capsule items showing in airport utility as a network. when able to "forget" them they initially drop off but soon return. how do i get them deleted and stay that way

since latest update to airport extreme im getting 10 unknown base stations and time caps showing up as though they are a part of my network. sometimes i can "forget" them and they will disappear initially but soon return. i need and want only my connection inside my home . any ideas. i have done a factory reset and set up a new network but they continue to show up.

I'm not convinced that the problem lies in Airport Utility. This same thing was happening to me, nearly exactly as you describe it. The thing is that with me, the problems clearly started when I updated the firmware in my Airport Express (n). That's when all the wacky stuff started happening. Sometimes it would show up in AU, sometimes it didn't and even if it didn't, I could still access the internet through it.
But as you said, the problems got really bad when another Express (b/g) was put on the network with it. Even when it did work, the (b/g) would make it impossibly slow.
You know more about this than me, and clearly have more patience if you've restarted the network fifty times. I gave up at about ten.
In any case, your solution is more of a work around and if you're still having that slow connection problem, I'm not sure you've got it. But thanks for your reporting of this. At least I know I'm not crazy.

Airport Express no longer shows in Airport Utility

I have had a lot of problems lately with my TimeCapsule and Airport Express. Neither have been showing in the Airport Utility. I had to do a hard reset and was eventually able to continue my backups, even though after the reconfig the TimeCapsule doesn't show again. I picked up the airport express to do streaming of audio and it worked great for about 6 weeks. I have done a factory reset on the device and it showed up for about an hour. I am looking at the AE and the light is green, but it doesn't show in the Airport utility and cannot get the speakers to show in my itunes.
Help!

Ended up being a problem between my two routers conflicting with each other. Set up two different networks in the house and now all is happy.

Wired AirPort Express not showing in AirPort Utility or iTunes

So I was using my two AirPort Express's to wirelessly play iTunes throughout the house. Recently I wired the house with Cat6 and decided to wire in the AXs for more reliability. My AXs are 1st gen and are running 7.6.1. The problem is, when I turned the wireless off on them, they no longer show up in AirPort Utility or iTunes. I can get them to show in utility by selecting "Configure Other" then manually entering their IP address and password, but that's the only way and they never show in iTunes and disappear from Utility once I "Update". They are wired to a Gigabit switch which is wired to a Netgear router.
Some additional Info:
Green light is on and solid
I can ping them and connect manually
"Connect using ethernet" is set
Connection sharing "Off (Bridge Mode)" is set
I also want to extend my wireless range with them, so I've mirrored my wireless settings and used "Create a wireless network" (tried without doing this as well without luck)
Enable AirPlay is checked
Netgear WNDR3700v2 Router Firmware version 1.0.0.36
Keebox SGE08 Gigabit Ethernet Switch
Windows 7 Home Premium SP1 x64
Any idea why I can't see or use them in iTunes and AirPort Utility?
Thanks!
-Jake

I wish that I could help you. I'm having a similar problem, but wireless.
A couple months ago, my two Airport Expresses and my Apple TV disappeared from iTunes AirPlay. When I ran the Airport Utility, the Airports and Apple TV could not be located. Interestingly, the Airports displayed a green light and all iDevices (iPod Touches and iPads) could connect to the Airports via AirPlay. Like wise, Airport Utility on the iDevices located the Airports. So I connected an Airport to the router via a Ethernet cable. Once connected via wire and after a hard reset (with an orange light displayed) the Airport Utility found the wire-connected Airport. I ran the utility to set up the Airport and a green light came on. Then the wire-connected Airport was visible on iTunes AirPlay. So I unplugged the Airplay and returned it to the stereo. The green light came on, but now neither iTunes not the computer based Airport Utility could find it, even though the iDevices could. I repeated this process expecting a different outcome enough times to be certified insane.
So as I sit my computer based (Windows Vista) Airport Utility and computer based iTunes (the new version) cannot locate the Airport Expresses even though the iDevices readily see them. And their green lights display a connection to the network.
I even tried a forced connection by pasting the Airport's IP address (obtained using Airport Utility on iPad) into the manual configuration of the Airport Utility on the computer. Oddly, once the IP address was entered, the computer based Airport Utility could see the specs of the Airport Express. But when I tried to save or conclude the Computer based Airport Utility configuration, I got an error.
Another odd thing is that the Remote App on my iDevices no longer works either. I can no longer connect to my iTunes library. The remote simply can't find my Library at all. (I confirmed that Home Sharing is on). But I noted that in iTunes is indicated that four devices work connected or linked to the Library. So I had iTunes "forget" the devices "connected" for Remote and tried to reconnect. I got the number could on the iDevise but the devise never appeared in iTunes Devises for selection.
So whatever problem is preventing iTunes from locating my Airport, is also blocking my iDevises from connecting to iTunes. Meanwhile, my iDevises can sync with iTunes (while wired - I never tried a wireless sync) and can connect via AirPlay to all Airports.
I've researched this for months and found nothing to work. I'm frustrated to the point of doing something drastic like dumping iTunes and finding some other player to manage my music and stream to my stereos. I'd rather not but the vast majority of my Library can't be played over my stereo.

AirPort Express doesn't show in AirPort Utility any more/won't connect to network

I have an older airport express that I use wirelessly with an AirPort Extreme to extend my network and stream music via AirPlay. Within the last couple of days it has been unable to join the network. It has always worked just fine until now.
The Airport Express powers up, flashes green once, then goes to amber flashing and stays that way forever. The Airport Express does not show up in AirPort Utility at all.
I have tried soft, hard, and factory resets to no avail.
The Airport Express info:
Model A1084
Can't check firmware version beasue it doesn't show up in Airport Utility
The Airport Extreme Info (which is working perfectly fine):
Model A1143
Version 7.6.4
Any further suggestions?
Thanks,
Dawn

Mavericks (Apple) will not let you run an older version of AirPort Utility on Mavericks.
So I've just discovered. Unfortunately I don't think booting from my older OS is going to work either, as it appears that 6.3.2 is also what I have installed there.
Doesn't make sense to me still, though, as I upgraded to Mavericks on day 1, but the Airport Expressed worked fine until yeterday.
I have a roomie with a PC. Will see if we can configure it on his computer.

Time Capsule not Showing in Airport Utility

I decided to re-set my Time Capsule this afternoon. The green light is on but it is not showing in the Airport Utility and Time Machine says there is no back up disc available.
What can I do?

Temporarily, connect a spare Ethernet cable from your Mac to one of the LAN <-> ports on the Time Capsule.
Restart both your Mac and the Time Capsule and then open AirPort Utility to see if your Time Capsule has been found.
If the Time Capsule is still lost, disconnect the Ethernet cable and perform a Factory Default Reset on the Time Capsule as follows:
Pulll the power cord from the back of the Time Capsule
Wait a few minutes
Hold in the reset button and keep holding it in while you plug the power cord back in to the Time Capsule
Keep holding the reset button an additional 8-10 seconds and then release the button
Allow 30-40 seconds for the Time Capsule to restart to a slow, blinking amber light
Connect the spare Ethernet cable from your computer to one of the LAN <-> ports and open AirPort Utility to reconfigure the device

Time capsule not showing in airport utility? recently moved house and new internet set up!

Hi
I had a time capsule set up and working perfectly then we moved house, changed ISP and now time capsule light is flashing amber. When I open the Airport Utility only the internet (i.e. a globe) shows, no time capsule. My Macbook Pro has no ethernet port or I would have tried hardwiring! I can enter the time machine but back up history is red.
I read that latest OS may require a rename of the capsule if the original name was long (29 characters including spaces at present) but to change it the support says to access it via the airport utiltiy which I can't do!
Help anyone?!
Sam

Simply factory reset the TC and start over.
Any time you move the network configuration the TC will require a new configuration.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

Airport express units no showing in airport utility

My airport extreme units are not showing up in the airport utility application.
I have an local wifi network established by linking an airport extreme to my ATT Universe router . This works correctly and the signal is good in most parts of our home . I had 2 airport express units acting as extension of the wifi network to the more distant areas. Somehow we lost the entire network when we were gone on a trip and I had to reinstall the airport extreme (works fine).
I know I need to reinstall the airport express units and link them to the existing network ...but they aren t showing up in airport utility . The normal process has been to reset them to their original configuration , then log on to them as a independent network ,then use airport utility to reset them as extensions to the existing wifi network.
Can t start unless they show up and they are a foot from my MacBook Pro .......I have 4 different units (only use two ) ? Nothing shows up .
What am I missing ?

Suggest that you work only with one AirPort Express (AX) at a time and leave the others powered off.
Perform a Factory Default Reset on the AX as follows:
Power down the AX
Hold in the reset button and keep holding it in while you plug the AX back in to power
Keep holding the reset button another 8-10 seconds then release
Allow 40-45 seconds for the AX to restart to a slow blinking amber light
At this point, the AX is producing a wireless signal with a name like Apple Network xxxxxx. You need to first log on to this network from your Mac if you want to configure the AX using wireless.
Or, you can use the Ethernet cable method to configure the AX and then disconnect the Ethernet cable once you have the AX updated with new settings
Repeat the process above fo the second AX, but note that the Apple Network xxxxxx with have different letters and numbers, as it will be a different network.

Airport extreme not showing in airport utility

I am running osx10.7 server and am attempting to port remap my airport extreme. When i open airport utility, it says that there are no airports in range, when i'm actually connected to an airport via wifi. I cannot figure out what the issue is. If someone can help me fix this issue and instruct me how to remap my rounter so i can use it to host websites and the like, it would be greatly appreciated.
Thanks a lot for your help in advance.
Zach Russell

grimstad wrote:
My Airport Extreme is working just fine, but I want to add Airport Express. The first step in my manual says to open Airport Utility, but I get the message "Airport Utility was unable to find and AirPort wireless devices.
This may happen if your system accidentally switch the radio band.
Try this first:
Disable WiFi in the Menu Bar
Enable again
Check if the Airport Extreme shows up in Airport Utility
If so, choose the Airport Extreme
Click Manual Setup
On there:
If possible disable "Guest Network" (it cause trouble by switching constantly radio band for user convenience)
Give the 5GHz wireless a dedicated name
If you have no 802.11g (iPhone, iPod Touch) in the network:
Set radio mode to: 802.11n only (5GHz) - 802.11.n only (2.4GHz)
If you need 802.11g
Set radio mode to: 802.11n only (5GHz) - 802.11b/g
You will reach these settings by holding option key (alt) while clicking on the Radio Mode pulldown.
Click Apply and wait for the Extreme to come back
After that,
check that your 5GHz capable systems use only the 5GHz name (SSID) when joining wireless.
For that, delete the 2.4GHz name (SSID) from the list of known networks in Systems Settings - WiFi - Advanced
Move the preferd network in the List at first place.
Rejoin wireless
Lupunus
PS ... to configure the Express, best connect a laptop via Ethernet to them. This eases the process a lot.

Airport Express not showing in Airport Utility, flashing Amber

I have 3 Airport Express units. Two of the 3 work fine and show up in Airport Utility v.6 , but the third flashes amber and is not recognized in Airport Express. I have tried soft and hard resets, and it always goes to a flashing amber light and is never reocgnized by Airport Utility.
If I pull down the Wifi icon and go to Airport Express, I get the following window:
Any ideas would be appreciated.

The screenshot is still not coming through here.
Sorry, but I am not familiar with any of the model numbers that you have posted. North and South American versions of the older Express models will be A1084, A1088, or A1264. The newest version of the AirPort Expess is A1392.
Regardless of the model number, all that you can really do is power up the Express for a few minutes, and hold in the reset button on the side of the device for 10 seconds. Then, release the reset button and allow a full minute for the Expess to restart to a slow, blinking amber light.
If you still cannot "see" the Express in AirPort Utility, you either have a defective Express or a much older version that is not supported by AirPort Utillity 6.x.

Airport Express not showing in Airport Utility

I am on a tripple play Fios modem wired to my 3rd gen. Airport Extreme to my Mac Pro running 10.6.8. My Airport Express which is plugged into my living room stereo (I have used successfully before) is not showing up in the Airport Utility and blinking amber endlessly. Unplugging and 10 sec. reset with the reset button, no difference. Please help.
W.W.

I was able to install utility 5.6 (I am on 10.6.8) but when the Express showed up and I followed the instructions, I got this message at the end: I tried to attache the sceen shot from the message I got, It did not work: It says: "Nothings connected to the WAN port. Connect the broadband modem or network to the Ethernet WAN port"
I never changed any Fios modem or Ethernet cables. Express is blinking.
W.W.

USB Hard Drive won't show in AirPort Utility

Hello,
I recently brought OWC Mercury Elite-AL Pro mini 750GB hard drive and attached it to Time Capsule. I opened AirPort Utility / Manual Setup / Disks. It didn't dhow the attached USB hard drive. The file sharing option is already enabled and I also restarted everything I can.
The USB Hard Drive is working fine since I'm able to open it when I connect it to MacBook Pro. The USB Hard Drive is already pre-formatted in Mac OS Extended (Journaled) format.
Any idea?

Never mind. I come to know that Time Capsule won't provide sufficient power to these kind of large hard drives with multiple ports. I brought Belkin USB Desk Bub with 4 USB ports and then connected hard drive to Time Capsule. That's it. Now my drive automatically shows in Time Capsule.
Even I'm able to play my media (previously I moved my iTunes Media to this drive.) without connecting hard drive to my Mac directly.

Base station does not show in airport utility

How do you display a base station in the airport utility?

Sorry, but an "older" one does not tell us much about which model that you have....since there are about a dozen different base stations which might be called "older", and the tips and tricks are different depending on what model that you have.
If you do not know the model number, please look on the bottom of the base station. The model number starts with an "A" followed by four numbers. Depending on what model that you have, It might be found on a label, or it might be embedded in the foam pad. Post back with the model number.
You did not answer our question regarding what version of AirPort Utility that you are using. We need that information to be able to help. If you have a Mac, open AirPort Utility and click on the AirPort Utility menu in the upper left corner of the screen, then click About AirPort Utility and post back with the version number that you see there.

No show in airport utility

Similar Messages

Maybe you are looking for