No SID found for value '000 ' of characteristic 0UNIT
Hi All,
iam loading to ODS from flat file and iam getting the error"No SID found for value '000 ' of characteristic 0UNIT ". to be more clear the load is taking place and the activation of ods is not taking place .
we added a new key figure to ods and when we add the data of the new field to the flat file we are getting this error . but when we load with the files which does not contain data to the new key figure its successfull .
can some one guide me how to resolve it.
regards,
jay
Hi All,
the data which i entered for the new key figure is 000 . is it because of it ? so , if i enter some value instead of 000 i may not get this error ....... am i rite? so checking the values means is it for the new key figure or there is an info object 0unit also in my case ?
kindly explain clearly with an example
regards,
jay
Similar Messages
-
No SID found for value 'PC ' of characteristic 0UNIT
HI,
I am extracting Profit analysis data from R/3 to BW3.5.
In this i am getting one error.
No SID found for value 'PC ' of characteristic 0UNIT
How can i resolve this.
I already did the following step.
rsa1->source system->r/3 source system, right click 'transfer global settings',
in next screen, make sure 'unit...' checkbox is marked.
and execute.
But the status is same(error)
Please help me..
ThanksNo SID found for value 'PC ' of characteristic 0UNIT
Hi,
I am not getting the right answer for this .The issue is very Urgent
I am extracting PP data from R/3 to BW3.5.
In this i am getting one error.
No SID found for value 'PC ' of characteristic 0BASE_UOM
How can i resolve this.
I already did the following step.
rsa1->source system->r/3 source system, right click 'transfer global settings',
in next screen, make sure 'unit...' checkbox is marked.
and execute.
But the status is same(error)
Please help me..
Thanks,
Chinna -
No SID found for value 'BOX ' of characteristic 0UNIT
Fellow masters,
I get a <b>BRAIN 70</b> error - "<b>No SID found for value 'BOX ' of characteristic 0UNIT</b> "
<b>Diagnosis</b>
Characteristic value BOX does not exist in the master data table of characteristic 0UNIT. Therefore, this value could not be transformed int othe internal SID.
So, I made reference to SAP Note 619987.
<i>If you do not find the value in the T006 or TCURC table, you must insert it. Note that the initial value is always allowed.
If you nevertheless receive this error message for the initial value, this means that there is an inconsistency in the SID table for the 0UNIT or 0CURRENCY characteristic. You can eliminate this inconsistency by calling the RSDMD_INITIAL_LINE_INSERT function module with I_CHABASNM = 0UNIT or 0CURRENCY.
If units are loaded in the external format, you must either convert these into the internal format in the transfer or update rules or change the extractor/file.The CONVERSION_EXIT_CUNIT_INPUT function module converts the external value of a unit into the internal value.</i>
Could someone please explain to me how which option should I proceed with ?
I did an <b>SE16</b> with table T006 but don`t seem to find 0UNITHi,
As Aneesh said, first Check the table T006 for the record for 'BOX' unit. If it is not there you have to do Replcation of Units from source system.
It does not affect the data existing in datatargets. It simply update the table T006.
Then after also check the table T006 for this record.
With rgds,
Anil Kumar Sharma .P -
"No SID found for value '*00 ' of characteristic 0UNIT ".
Hi,
while loading data from ODS to cube iam facing load issue like "No SID found for value '*00 ' of characteristic 0UNIT ".
pls help me it is urgent.
i will assign points
your help will be highly appreciated....Hi krish,
1)Do manage on ODS, use option '=leave blank' for 0BASE_UOM' ok.
2)If you find records, go to selective deletion. Be very careful, gain select 0BASE_UOM=blank', complete it.
3)Go to cube, delete the previous request(no need if it is a full update)
4)Update again from the ODS to cube
regards,
Vinay -
0UNIT - No SID value found for value 'FYR' of characteristic 0UNIT
Dear All,
Request your help for the following issue observed.
Please find below the details of the issue observed:
Scenario: A flat file upload in and ODS with field Alternate Unit of Measure (mapped to 0UNIT)
Issue: While activating the data in the ODS (Transformation, RSDS transaction datasource), it gives an error stating 'No SID found for value 'FOZ' of characteristic 0UNIT'.
Measures tried: Transferring Global Settings, Checking in the table 'T006', Checking the format of the flat file.
May I please request your help for the above issue at the earliest.
Thank you.
Regards,
Kunal GandhiHello,
Same issue here.
I've checked the entries in 0UNIT SID table: The unit "xxx" is not present.
But this unit is present in T006 table, with no specific option.
The update mode for Master Data on SPRO is : "Create master data if Not avalaible (Auto_sid)"
The update mode in infopackage is "Always update data, even if no master data exist for the data"
I've used the "Rebuild tables" mode for Units of measurement for my source system.
The tried the simulate update for my datapackage.
==> No errors
==>deletion of package on the data target
==>manuel update of data from the package
==>change to green
==>check the 0UNIT SID table : The unit "xxx" is now present !
Hope this helps -
No SID found for value 'GB' of characteristic 0CURRENCY
Dear Experts,
When i do the BW data load. I got the error. Seems the error related to no master data is available for SID creation. I got the below error message. Please help me to resolve. Points will be awarded. Your help is much appreciated. Thanks.
No SID found for value 'GB' of characteristic 0CURRENCY
Message no. BRAIN070
Diagnosis
Characteristic value GB does not exist in the master data table of characteristic 0CURRENCY. Therefore, this value could not be transformed into the internal SID.
Procedure
Check whether the value is correct or not. If it is correct, you need to generate the associated master data. Note: For characteristics 0FISCVARNT, 0FISCPER and 0FISCYEAR, there must be a corresponding fiscal year variant (see table T009). In addition, there must be units in table The value for 0FISCPER must be valid according to the fiscal year variants. This means that only the periods 0 to (no. of normal periods + special periods) are allowed. If the fiscal year variant is year-dependent, then only the periods defined for the corresponding year are valid. You can make these settings in Customizing in theactivity Maintain Fiscal Year Variant. T006 and currencies in table TCURC. Also note that the units must be of
Units that refer to 0UNIT must be available in table T006, and currencies that refer to 0CURRENCY in table TCURC. Note that the units must be available in internal format. Owing to the presence of a conversion exit in field MSEHI of table T006, you are only able to see the internal format if you deactivate this exit. ( Settings> User Parameters> Tab DataBrowser > Consider Conversion exit must not be set). Also take a look at note no. 619987.
Regards,
RR.Hi Reddy/Ajeet,
Thanks for your prompt reply.
I followed the steps:
Goto to RSA1-> Source systems--> Transfer Globle settings and Select Currencie, Ubits and Fiscal year, Factor...etc and select Update
Just would like to check with you, currently we are extracting data from SRM & SAP R/3 system.
I got the error while doing the data loading for SRM system. I did the above steps for both systems.
Is that anything else, i need to do....
Currently i am going to do the master data load, then i will do the transaction data & check with the currency error.
could you please elaborate the steps
1)How to check 0currency is getting updated in our system.
2) how to verify custom z program used
3) How to maintain the currency manually in BW.
Advance. Thanks.
Regards,
RR -
No SID found for value '0CURR' of characteristic 0CURRENCY
Hello dear friends
I am getting this above error message 'No SID found for value '0CURR' of characteristic 0CURRENCY' when i am trying to load data in my cube from an ODS.
For the Keyfigure that is using the currency i had to write the following routine in the Update Rule fo rthe Keyfigure:
DATA: l_MZPLP1 LIKE /BIC/PMMAT_PLNT-/BIC/MZPLP1,
l_MZPLP2 LIKE /BIC/PMMAT_PLNT-/BIC/MZPLP2.
SELECT SINGLE /BIC/MZPLP1
INTO l_MZPLP1
FROM /BIC/PMMAT_PLNT
WHERE
/BIC/Mplant = COMM_STRUCTURE-/bic/Mplant
AND
/bic/mmat_plnt = COMM_STRUCTURE-/BIC/MMATERIAL.
IF sy-subrc = 0.
RESULT = l_MZPLP1.
ENDIF.
result value of the unit
UNIT = '0CURRENCY' .
Also i checked the 'UNIT CALCULATION IN THE ROUTINE' box.
And under UNIT it does show 'Target Unit' - 'Currency Key'.
Please advise what should i do to resolve this.hi Krrish,
the error message normally indicates the value is not exist in table currency/unit
Note 619987 - No SID for the 0UNIT or 0CURRENCY characteristic
you can try transfer unit and currency from r/3, rsa1-> source system->right click 'transfer global setting', mark 'currency' and 'unit of measurement' (fiscal year and factory calendar also) and option 'update tables' and execute.
you need to schedule this update, better daily before the transaction data load, to do this, from same screen go to menu program and schedule in background.
hope this helps.
Solution
If you do not find the value in the T006 or TCURC table, you must insert it. Note that the initial value is always allowed.
If you nevertheless receive this error message for the initial value, this means that there is an inconsistency in the SID table for the 0UNIT or 0CURRENCY characteristic. You can eliminate this inconsistency by calling the RSDMD_INITIAL_LINE_INSERT function module with I_CHABASNM = 0UNIT or 0CURRENCY.
If units are loaded in the external format, you must either convert these into the internal format in the transfer or update rules or change the extractor/file.The CONVERSION_EXIT_CUNIT_INPUT function module converts the external value of a unit into the internal value. -
Red error: No SID found for value 'BTL ' of characteristic 0BASE_UOM
Loading 0FI_GL_4 data from R3, get some red erros, the 1st error is:
No SID found for value 'BTL ' of characteristic 0BASE_UOM
Check the above red error details:
Diagnosis
Characteristic value BTL does not exist in the master data table of
characteristic 0BASE_UOM . Therefore, this value could not be
transformed into the internal SID.
System response
Procedure
Check whether the value is correct or not. If it is correct, you need to
generate the associated master data. Note: For characteristics
0FISCVARNT , 0FISCPER and 0FISCYEAR, there must be a corresponding
fiscal year variant (see table T009). In addition, there must be units
in table The value for 0FISCPER must be valid according to the fiscal
year variants. This means that only the periods 0 to (no. of normal
periods + special periods) are allowed. If the fiscal year variant is
year-dependent, then only the periods defined for the corresponding year
are valid. You can make these settings in Customizing in the activity
Maintain Fiscal Year Variant . T006 and currencies in table TCURC. Also
note that the units must be of
Units that refer to 0UNIT must be available in table T006, and
currencies that refer to 0CURRENCY in table TCURC. Note that the units
must be available in internal format. Owing to the presence of a
conversion exit in field MSEHI of table T006, you are only able to see
the internal format if you deactivate this exit. ( Settings > User
Parameters > Tab DataBrowser > Consider Conversion exit must not be
set). Also take a look at note no. 619987.
Procedure for System Administration
Any idea to resolve the loading problem?
ThanksKevin,
what ever it may be the source system, if T006 Table contains BTL, that sloves your problem.
try load data once again. please update the thread after loading.
all the best.
Regards,
Nagesh Ganisetti. -
No SID found for value 'PF ' of characteristic 0BASE_UOM
guyz,
im facing the below issue while loading transaction data from DSP to CUBE.
Please guide.
cheerz,
raps.
No SID found for value 'PF ' of characteristic 0BASE_UOM.
Diagnosis
Characteristic value PF does not exist in the master data table of
characteristic 0BASE_UOM . Therefore, this value could not be
transformed into the internal SID.
System Response
Procedure
Check whether the value is correct or not. If it is correct, you need to
generate the associated master data. Note: For characteristics
0FISCVARNT , 0FISCPER and 0FISCYEAR, there must be a corresponding
fiscal year variant (see table T009). In addition, there must be units
in table The value for 0FISCPER must be valid according to the fiscal
year variants. This means that only the periods 0 to (no. of normal
periods + special periods) are allowed. If the fiscal year variant is
year-dependent, then only the periods defined for the corresponding year
are valid. You can make these settings in Customizing in the activity
Maintain Fiscal Year Variant . T006 and currencies in table TCURC. Also
note that the units must be of
Units that refer to 0UNIT must be available in table T006, and
currencies that refer to 0CURRENCY in table TCURC. Note that the units
must be available in internal format. Owing to the presence of a
conversion exit in field MSEHI of table T006, you are only able to see
the internal format if you deactivate this exit. ( Settings > User
Parameters > Tab DataBrowser > Consider Conversion exit must not be
set). Also take a look at note no. 619987.
Procedure for System AdministrationDid you try running CUNI transaction & maintaing the units? You can check the characteristic 0BASE_UOM for attributes, text and hierarchy, load the master data types which are available to that object. Else, Use RSRV. There is a special option for repairing SIDs for units. If this doesn't solve, replicate the UoMs from the source system. Right click on the source system and select transfer global settings. 0BASE_UOM could not be the same as normal infoobject in NA category, possible the values are picked up from the UoM customizing.
Also, use this with caution : Function Module RRSI_VAL_SID_SINGLE_CONVERT; Hope this solves the case.
Edited by: Arun Bala G on Feb 16, 2012 10:36 PM -
No SID found for value 'ZDP ' of characteristic 0PO_UNIT
hi all,
iam loading daily delta for invoice verification infocube..
today iam getting following error
1. Data records for package 1 selected in PSA - 1 error(s)
2. Record 496 :No SID found for value 'ZDP ' of characteristic 0PO_UNIT
3. Error 4 in the update
even i found , at update tab it was checked : update if no master data exists.
i loaded once again ,,,getting same error..
plz give me solution
Thanks in adv
pinkii reddyHi,
Some times we cant trace based on the details given on the details Tab....
Did u checked the error by doing the following steps...
RSMO>Details>Right Click on 'Record 496 :No SID found for value 'ZDP ' of characteristic 0PO_UNIT ' and say Help for node or display messages....
It gives u clear cut message where the exact error lies...Based on this Go to PSA and filter the erroneous records and edit....
Let me know if there r any clarifications..
Thanks & Regards,
Dinakar. -
No SID found for value '0000' of characteristic 0CURRENCY
Hi all,
I am executing a query based on a virtual infocube, reading data from a 3rd party appliance and Im receiving the following error when running the query in RSRT2:
No SID found for value '0000' of characteristic 0CURRENCY
'0000' value does not exist in the source table, we have checked one by one the possible values that we have on the source.
Also, similar threads in the forum didn't help me to solve it.
Do you have any ideas of what's happening or how to solve it?
Thanks a lot for your help
InakiHi,
I am reporting on a virtual infocube, reading data from IBM Netezza appliance through UDConnect.
In the details of the error I can see:
'Characteristic value 0000 does not exist in the master data table of characteristic 0CURRENCY. Therefore, this value could not be transformed into the internal SID.'
Do you recommend me to delete datarecords with 0000 value in the start routine? its quite strange since as i said, sql query didn´t show any currency values that were not in the tcurc table.
Thanks again.
Inaki -
No SID found for value '*LOC_C' of characteristic 0LOC_CURRCY ".
Hi,
while loading data from ODS to cube iam facing load issue like "No SID found for value '*LOC_C' of characteristic 0LOC_CURRCY ".
pls help me it is urgent.
i will assign points
your help will be highly appreciated....Hi,
LOC_C is definitively not a currency; check your TRules and URules if 0LOC_CURRCY is correctly mapped;
in adition, check if your source system is not bringing this wrong infomation
When you've found the issue delete this request, reoad it and activate it.
hope this helps...
Olivier. -
I have loaded a DSO successfully, they when I am activating it, I receive the error message "No SID found for value 4125463633 ZGL_SIRID. However, when I look at the SID table (/BIC/SZGL_SIRID) and search for the value indicated, I see that value in the SID table. Then when I look up values before and after that number, I see those values and they look just like the one that is giving me an error.
In the Monitor, under the Detail tab, in DataStore Activation (change log):Errors occurred
No SID found for value '000000004125463633 ' of characteristic ZGL_SIRID
Process 000065 returned with errors
Activation of M records from DataStore object ZPC_O09 terminated
Thanks, Keith JHi,
Try to activate the packages in parallel.
Go to the option "activate" in manage and then inside you have the option "Activate in Parallel" at the right of process chain option.
Go inside it select the option Dialog and give the option "Server Group for Parallel Dialog Processing" as PARALLEL_GENERATORS.
Let the number of process be 3.
and now try to activate the request again.
Once done then you should revert back the settings as the it was originally.
If this is not working then try to activate the master data for ZGL_SIRID ..run an attribute change run and again try the activation of the DSO.
Thanks
Ajeet -
Data Load Error: No SID Found for value.....
Hi,
I'm loading data for 0REFX_C01-Conditions Cube (Real Estate). Load Fails & error message is "Record 1 :No SID found for value 'IB20010000777700000001 ' of characteristic 0REOBJECT". Master data for 0REOBJ_ATTR & 0REOBJ_TEXT has already been loaded.
Description of Error:
Characteristic value IB2001000077770000 does not exist in the master data table of characteristic 0REOBJECT. This value could not be be transformed into the internal SID.
Could someone help me resolve this issue??
Thanks in advance. Points will be rewarded.The record is coming from your source system. The reason why it's not in your Master Data can be either because it's new Master Data (created since last time you loaded) or a wrong input in the source system.
Either way, the answer is in your source system, so make sure this definition exists there and its a valid value.
If it is, try to load and activate your master data again and then load the cube once more.
Regards,
Luis -
No SID found for value 'ZMCR/YMIN' of characteristic 0SPRTTYPE
Good day All,
We have done all the configurations for ITSM reporting and interactive reporting is working correctly but the ITSM BW reporting is giving the below error.
Kindly assist with the solution.
Regards
TebogoHi Tebogo,
In order to fully configure ITMS Reporting you should follow the steps provided in the central note:
1421507 - Incident Management Reporting Central Note
In order to show reports in Incident Management Reporting,
DSO 0SPRLDATA has to contain data, otherwise Reporting will not show data.
Before, there are two extractors
E2E_SVCP_EXTRACTOR_MAIN
E2E_SVCP_EXTRACTOR_MASTERDATA
that should be active, however those extractor are not. As first step, please try to repeat solman setup steps.
Activate BI content, and schedule extractors. (In step 2.3 of solman_setup ITMS Management)
On the other hand, you can find the Incident Management Reporting Setup by starting the transaction SOLMAN_WORKCENTER and navigating to the Incident Management Workcenter. In the Incident Management Workcenter choose the view "Reports" on the left side. The table with the customer numbers should appear. In the upper right corner of the table appears the link "Setup".
Please, repeat this configuration step, ensure that in DSO 0SPRLDATA the data is loaded and then retest.
Thanks
Vikram
Maybe you are looking for
-
We have the OfficeJet 6500A All In One Printer. It is on a network to two computers one using Windows Vista and the other Windows7. It seems strange that the only size of envelope for the European Market is a C6. There is no facility for customising
-
Camparing file name with a value of the field in the source
Hi All, I have a file sender. I need to compare the file name with the value of a field in the source and then map to the target. For example: <Record> <Date>20071103></Date> <name>abcd</name> </Record> the name of the file would be 2007110
-
Hello, i cant find the cellular data network settings menu that appeared in iOS6 like this "http://support.apple.com/kb/HT2283" on iOS7. I need to edit the APN so my iphone can connect to the network but i cant find that menu, please help me! iPhon
-
Creation of Dynamic Roadmaps???
Hi, I am a rookie in webdynpro and i want to know how to create a dynamic roadmap?? Kindly help me out... A detailed explanation would be more than helpful!!! Thanks... Chaitanya
-
I need a new magnetic case for my iPhone 4.
I'm currently using a BlackBerry case. I love the magnetic closure and the fact that the entire case swivels. I have a sleeve on my iPhone now and it doesn't quite fit anymore. Does anyone have any ideas?