No signal after dropping phone

So i accidently dropped my phone yesterday. No visable damage. but i have no signal! Any ideas??

You may wish to speak with Apple at an in-store or visit your Carrier's store for further assistance. Don't mention you dropped the phone as that would be the dead giveaway and they'll replace it.
AppleCare has a store policy of limited assistance when it comes to accidents and negligence.

Similar Messages

Grey horizontal lines after dropping phone?

I dropped my phone and when I picked it up there were and still are grey horizontal lines across the screen. I don't know how to fix it. Help? I looked it up online and somewhere it said that something could be wrong with the LCD? I have also tried resetting it and turning it off. Anything that could help would be great. Thanks!

Your iPhone has a hardware issue from the drop. The screen will need to be replaced. Go to https://locate.apple.com/country to find service locations.

WRT610N v2 - Dropped signal after macbook goes to sleep

Hi there,
My wireless G macbook drops the signal after it wakes from sleep mode. I also have a similar issue with my PC and the WUSB600N but I believe that one is the adapter issue. Can you think of any reasons why this would occur? Troubleshooting?

Is your Mac computer is wired or wireless...?
open the router setup page and Under the Wireless tab,Click on Advanced Wireless Settings..Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings... Now,check.
As far as the WUSB600N is concerned,try updating the driver for that.

Im using phone 3GS 32GB, my signal was very poor but whenever i insert my sim to other phone, there's no signal problem.. When i change position, the signal suddenly dropped. my software version now is 4.3.5.

im using phone 3GS 32GB, my signal was very poor but whenever i insert my sim to other phone, there's no signal problem.. When i change position, the signal suddenly dropped. my software version now is 4.3.5.

GoodReaderUSB originally worked by transferring files to a special location on a user’s iPhone, which iPhone’s GoodReader app was able to access. However, accessing this location was a violation of Apple’s iPhone SDK Agreement, because the app had to access files outside its own private storage space, which is forbidden by Apple.
Because of this, your only choice to fix this. at this point, may be to restore your phone as a "new" device in itunes and NOT from backup. Follow this by syncing your content back to your phone. Unfortunately, ALL saved data on your phone will be lost.

Wifi won't stay connected after switching phone off and back on

This does not seem to be the apparently common problem of either dropping wi-fi signal OR losing wi-fi after the phone sleeps.
I have a 3GS. My wi-fi works fine all day while I'm around the house even with multiple sleep events. However, when I switch off my phone at night and then turn it back on again the next morning, the phone stays on 3G. If I go to the wi-fi settings, it shoes wi-fi is "on" and I can select my network and it will join it right away. It just doesn't rejoin automatically.
I am not certain about this, but I think this problem may have only started when I recently switched on the "ask to join networks" setting. I have tried turning this off but still the problem remains.
My wife's 3GS and my son's 4 both stay connected after a switch off and back on, and we are all using the same network.
If anyone has any suggestions I would be most appreciative. With three of us now sharing the cell data plan we are getting very close to the limit each month and want to maximize wi-fi usage.
Thanks.

SKAshanchi wrote:
From this article:
http://support.apple.com/kb/HT5883?viewlocale=en_US&locale=en_US
Note: Touch ID cannot be used for purchases if Require Password in Settings > General > Restrictions is set to Immediately.
I don't have any restrictions set on my phone at all.

TS4429 NO SIGNAL AFTER UPDATING LATEST SOFTWARE ANY HELP PLZ

got no signal after downloading latest software anyone help please

Hi norrod
If you hadn't already been to the phone shop I would have said it is most probably a hardware fault in the antenna circuitry of the phone.
Can you remember the phone being dropped at any time?
Happy to have helped forum in a small way with a Support Ratio = 37.0

BT Broadband signal keeps dropping

Hello BT community,
I have BT Broadband and the signal keeps dropping. For your information:
I am using a Draytek 2850N with firmware version: 3.6.2_2471201
I am not sure whether the line is ADSL or ADSL2+
The exchange is Chobham and has exchange code: THCH
I am 1.2 miles from the exchange
The symptoms of the problem are simply that we loose the signal and cannot browse the web.  I have bought a brand new ADSL Filter and the router itself is brand new (replacing the BT Home Hub 1.x).
The strangest thing is that when the connection drops I can get it back by dialing out on our telephone which used the same line as the broadband and after a few seconds of listening to the time (I dialled 123) the router re-synch's if you leave the router to do this on it's own the connection does not reform; which I think is quite weird.
If you telnet onto the router and run log -wt I can see the following:
5:56:13.150 ISDN1<<<<PPPoE (WAN-1) Len = 45
    Protocol:CHAP(c223)
        Success Identifier:0x01CHAP authentication success, unit 29568 ##
5:56:13.200 ISDN1<<<<PPPoE (WAN-1) Len = 24
    Protocol:IPCP(8021)
        ConfNak Identifier:0x01
            IP Address: 86 143 121 235
            Primary Domain Name Server: 194 74 65 68
            Secondary Domain Name Server: 213 120 234 62 ##
5:57:02.690 ISDN1>>>>PPPoE (WAN-1) Len = 10     Protocol:LCP(c021)         EchoRep Identifier:0x04Magic Number: 0x0 00 00 ##
5:57:09.580 DSL: LineFailure Update: DSL_G997_LINEFAILURE_LOSIPLM 5:57:09.620 DSL: NE Loss of Signal, rebooting DSL state machine 5:57:09.630 DSL: LineFailure Update: DSL_G997_LINEFAILURE_LOSIPLM 5:57:09.650 ISDN1>>>>PPPoE (WAN-1) Len = 6     Protocol:LCP(c021)         TermReq Identifier:0x02 ##
5:57:09.740 DSL: DSL Rebooting...IPLM 5:57:10.080 DSL: Modem Shut Down from ADSL Phy Layer (0) 5:57:27.830 ==>PPPoE (WAN-1) Len = 6 V:1 T:1 PADT ID:6
Can anyone tell me if this is BT's problem as I have replaced all of my kit. Coult it be BT's NTE or even their network?
Solved!
Go to Solution.

Hi Welcome to the forums
Here is a basic guide to getting help from the community members done by CL Keith Please read through the link posted http://forumhelp.dyndns.info/speed/first_steps.html
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
once you have posted the information asked for then the community members can help you more
Thank You
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

I updated to IOS 5 and now my signal strength drops sometimes clear to zero when I open an app.

I updated my Iphone 4 with the IOS 5 operating system. When I use an application, including the phone app, my signal strength bars will drop from 4 or 5 bars to 1 bar and sometimes to no bars and searching for a signal. When I exit the app the bars return tto what they were before. I have an AT&T plan that operates in Mexico which is where I am now. In Mexico it operates on the TelCell network. Before updating the op system I had no problems with the signal strength dropping when I used an app.

Hello timfromharris,
Have you gone to your date and time settings and verified that "set automatically" has been checked?
If you don't know where to go, it's Settings -> General -> Date and Time.
Good luck!
Brendon

Forcing the N73 to 2G signal (3 network phone)

I have serious issues with the 3G signal where I live despite being in a large town with apparently perfect coverage. I am unfortunately with the 3 Network.
I can change the network settings of the N73 to select the 2G signal (by going to 'manually select network') but within minutes it changes back to the 3G signal-3 tell me this is because the 3G signal is 'stronger' yet the 2G signal is full bars whilst 3G is 1 or zero bars, 2 if you're lucky!
I'd love to force the N73 into 2G mode if that's possible as it would solve the problem. My calls disconnect so frequently here it's appalling (I'm talking about 10 times per call...and at least a minute's worth of breaking up and silence to add to the rest of the problems).
Thanks!

In order to set your phone to 2G network or GSM, goto Tools > Settings > Network
Set the Network mode to GSM, after the phone had rebooted you should now in 2G. In this mode it also helps extend your phone standby time and please be noted that the video call function will not be available.
Hope this helps.Message Edited by n73me on 14-Oct-200704:01 PM
Firmware: V4.0812.4.2.1
Nokia N73 (12) RM-133 Product Code: 0539346

No signal after standby status

Dear All;
i have problem in my iPhone 3G with the antenna signal, after turning the Phone on the standby mode the signal disappeared, and then when i turn it back to the active mode the phone start searching and then got the signal, and if the phone stayed at the active mode the signal stays good.
please help me in finding the problem and the solution.
thank you
JHONE

Triusa, welcome to the forum.
I suspect that your problem is caused by the power supply unit (PSU). Here is a guide to help you troubleshoot the problem:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph06788&lc=en&dlc=en&cc=us&product=502610&rule=...
Also, the existing PSU is 250W. The GT 610 requires a minimum of 300W.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

My 822 now says, "ERROR: Unable to find bootable option. Press any key to shut down." Just happened after my phone froze. Everything I've searched says to replace the phone. I have no phone in or out, no alarm....what is going on with this? I see others

My 822 now says, "ERROR: Unable to find bootable option. Press any key to shut down." Just happened after my phone froze. Everything I've searched says to replace the phone. I have no phone in or out, no alarm....what is going on with this? I see others have the same problem.

Just got the same error message today. My phone went to the black screen of death with the error message at the top. Contacted Verizon via chat. Was online for 1 hour and 15 minutes only to find out that nothing could be done which I could have told them based upon what I had read on this site. Of course my phone is out of warranty since I have had it for 1 1/2 years and I am not eligible for an upgrade. How convenient! I was told to contact Nokia which I did and they gave me a download to try to reset everything. It looked like it was working but after almost 3 hours it got to the end and nothing happened. It just froze even though it said it was done. I rebooted the phone and am back at the same black screen of death. Guess I have to buy a used phone and then will have to reconsider whether or not to stay with Verizon going forward. I have not had any issues with the phone in the past - keep it in an otter box, never dropped, never got wet, etc. But all of a sudden it goes haywire like this that seems like either a hardware or software problem but something completely out of my control and all I get is sorry, you're out of warranty!

How can i reset or restore my iphone after dropping it in water

how can i reset or restore my iphone after dropping it in water????

There are a lot of posts here about your problem, read a few of them and they all come back to switching the phone off immediately and have it in a very good closed bag of dry rice for a week and advisely swith the rice for a fresh charge of dry rice every week for a number of weeks when it was really submersed. Ckuan advice times 3. The iPhone has a detector which indicates whether the iPhone was in the water, Apple can give you an indication about the price first if you visit them.

Dropped phone in coffee, turns on but sticks on the i tunes icon. Restore won't complete because of error 29. Any ideas?

dropped phone in coffee, turns on but sticks on the i tunes icon. Restore won't complete because of error 29. Any ideas?

After being submerged in coffee, did you power the iPhone off right away and if so, how long did it remain off to be completely dry - for the interior, not exterior?
Did the coffee include cream and sugar? Electronics and moisture don't mix especially with moisture that includes sugar.
Regardless, sounds like there is some hardware damage especially if not powered off and allowed to dry with the interior before being powered back on.

Dropped phone in water, trying to dry it out, what is the best way?

Dropped phone in bath water, what is the best way to drt it out and maybe save it?

Agreed. Mine went through the washer and appeared dead. These steps saved it but you must be patient and let it stay in the rice for the week. Very hard to do! Mine was fine functionally after that though the screen was blotched. The screen blotching cleared up after a week and then good as new!
Good luck!

Since updating my iPad and iPhone to the new software iOS6, my wifi has not been working properly I'm either getting a very week signal or the signal is dropping completely,

Since updating my iPad and iPhone to the new software iOS6, my wifi has not been working properly I'm either getting a very week signal or the signal is dropping completely. Has anyone noticed this?

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
Try This - Renew IP Address:
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

No signal after dropping phone

Similar Messages

Maybe you are looking for