No signal for iphone4's

gud day! my iphone4's has no signal while my other cellphone has.they both have an international roaming sim.both were activated by our network provider,what is wrong with my iphone's settings?pls. help.tnx!

Hello @Bull51,
I understand that your new HP ENVY 700-215xt Desktop PC is coming up with the No Signal message when you start is up and you are seeking assistance. Given how new your computer is I would advise you to call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html. With a new unit such as this you want to ensure that it is functioning properly and that any issues with it are documented correctly.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Similar Messages

How can I record multiple signals for a long period of time?

Hi, everyone
I am new at labView I just recentlyl started using it. Right now I am working on this assignment
that I have to display en record six different signals comming up from a DAQ. so basically What I did
for my IV is placing a whileloop. Inside the while loop I set up the DAQ assistant and then I send that
to a split signal function in order to split the signas that are comming from the DAQ ( so those signals
are EMG1,EMG2, blood flow1, blood flow2, blood pressure, and AM stimulation) after I split the signals
I send each individual signals to a waveforme graph, but my problem is that I need to record those individual
signals for a long period of time every second for about 8 hours. so it will be really helpfull if someone can
guide me through this. Thanks
Regards

Hi,
With your while loop, you'd better use low-level VIs to write your data to a file. Please see attached...I've used text file function but if you need ta save a large amount of data, you may need to use binary file functions instead (nearly the same way to perform this whatever you chose text file or binary file function).
Best,
J.
Attachments:
RecordData.vi ‏27 KB

How to delete a file in Keynote Remote for iPhone4?

Any one know how to delete a file in Keynote remote app for iPhone4? I uploaded a Keynote file from iDisk to my iphone and I can't delete the file. The file does not show up when I connect my phone to iTunes.
I also cannot connect my Iphone to Keynote anymore because of this file.

The file is actually in the Keynote app and not the Keynote remote app for iPhone.

Just bought a new iphone 5 i have an old imac computer OSX 10.5.8 and itune version 10 (updated at great cost last year for iphone4) it dosen't let me restore data... any chance of update or do i have to thow away my computer (and never by Mac aga data 0

Just bought a new iphone 5, i have an old imac computer OSX 10.5.8 and itune version 10 (updated at great cost last year for iphone4) it dosen't let me restore data... any chance of update or do i have to thow away my computer (and never by Mac again?)

You an use your iPhone without connecting it to a computer.
But the product description for the iPhone clearly states that in order to sync with a Mac you must have OSX 10.6.8 or later. That version of the OSX is usually called Snow Leopard. There are two mo recent versions of OSX. OSX 10.7.x (Lion) and OSX 10.8.x (Mountain Lion).
If you can upgrade your computer to at least Snow Leopard I suggest you do so.

Can I set up to connect 2 or 3 airport expresses to have a stronger wifi signal for a larger area?

can I set up to connect 2 or 3 airport expresses to have a stronger wifi signal for a larger area?

Theoretically yes. It will really depend on your situation. Please review the following Apple Support article to understand what is possible with the AirPort base stations and post back with any questions or help in setting up your extended network.

HT5594 I have lost my I phone5 amd I have enabled lost mode. But still I can't find out where it could be and I cloud search gives offline signal. If the thief turns on my phone is it possible to find out my phone or given any signal for me?

I have lost my I phone5 amd I have enabled lost mode. But still I can't find out where it could be and I cloud search gives offline signal. If the thief turns on my phone is it possible to find out my phone or given any signal for me? is it possible for the thief to use or sell my I phone even it is on the locked mode by ICloud?

If it is turned on and your lock request is able to be fulfilled, a confirmation email will be sent to your Apple ID email address. There isn't any known way to bypass Activation Lock on your phone so no one will be able to use it. More information on Lost Mode: http://support.apple.com/kb/PH2700

How can I get 'sync' signals for sine wave out? [FPGA USB 7856R]

Hello,
I'm Sean Ahn using NI 7856R, USB FPGA with LabVIEW 2014.
I'm trying to make 'sync' signals for sine wave of adjustable frequency, like general function generator's sync out.
I use sine waves whose frequency is feedback-congtrolled between 25~30 kHz and need sync signals of square wave.
Like [1] below, when I try resettng two wavefom-generators, sine and sync signals are not perfectly synchronized.
And everytime I adjust sine's frequency, the phase difference between sine and sync changes arbitrarily
In case of [2] using 'zero-crossing detector', I have severe jitter of sync signals not suitable as 'sync' signals for other parts.
Please, give me some help.
Thanks in advance
Sean Ahn
[1] Reseting two waveform generators
[2] Zero-crossing detect

Here’s my issue. When I try to move any data between my PC and the iPad2 I receive an error message that states that “the [sync] session could not be started with the ipad, Please disconnect and reconnect the iPad and try again”
I have tried again and again by various methods etc . and all I get is the same message when I attempt to sync, backup or update the iPad.
I have tried the following AND FAILED:
Deselect all Apps, Music etc in iTunes, then attempt to sync
Disable and enable the iPad in device manager and restart itunes and try to sync again
Disable and enable Apple Mobile Device Services and sync/backup/update
Run iTunes as Administrator
Reboot all devices (iPad buy pressing two buttons at once)
Turn off all security and reboot and sync
Connect directly to internet without a router
Tried to sync with all wireless turned off and in airplane mode
Running iTunes Diagnostics...... nothing all test passes
Changing USB ports and cables
Removing my SIM card and rebooting and trying to syc
Trying to sync via wifi only
Turning off all icloud services
Uninstalling all Apple Software and reinstalling again
I am syncing to a 64bit PC running Win 7 Premium with all the latest updates, all firewalls off. WiFi and direct connect ethernet to Internet service with and without router.
I am trying to Sync an iPAD 2 running iOS version 5.1.1 (9B206)
I am trying to update from iOS 5.11 to 6.01 by using Itunes 11.0.0.16.3 in a USB or directly through the iPad via wifi.
Please help as everything I have tried has failed.

Why it takes long time to download and udates for iphone4

why it takes long time to download and updates for iphone4 ?

Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Why do you need this if you are going to Oracle. Try
removing this. It might be trying things out with the
old driver and then moving to the new driver. This has nothing to do with it. (And it doesn't "try things out")
>
Also check your machines. They might be slow. There is
no reason, it should take more than few hundred
milliseconds to connect to a database on localhost as
your case is.Possible reasons...
- Network traffic
- Faulty router/gateway
- Busy server
- Faulty network card (either end)
- Conflict with another box

Is it save to use digital output as a digital input signal for another channel

Hi all,
I know this is a stupid question, but I do not have other signal generator by hand. So what I want to know is, can I use the digital output signal of my USB-6001 as an input signal for the same device but on other digital port? I did not try out directly because I do not want to burn the device down......
Thanks
Solved!
Go to Solution.

I do loop backs all the time, especially in my test systems as a way of making sure my signal is making it to the UUT pin. I typically throw in a 10k resistor just in case, but I have never had an issue.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Can I get an Ipad with wifi and cellular but no contract with a carrier in the US? I want to use it overseas in Africa with a local SIM card and use the cellular signal for all my internet.

Can I get an Ipad with wifi and cellular but no contract with a carrier in the US? I want to use it overseas in Africa with a local SIM card and use the cellular signal for all my internet.

Yes you can. All Ipad's are unlocked and can be used any where in the world. Buy the AT&T version which is GSM in other countries

How to use startscan signal for triggering for E-series DAQ

Hi, I want to collect the engine cylinder pressure data with a PXI-6070E DAQ card and BEI Encoder. I want to use the TDC signal as trig1, and crank angle signal as startscan for triggering. Could anybody give me an example or suggestions about doing this in labview. I cannot find any example that uses startscan signal for trigging. Thanks.

There is an example VI that is installed with LabVIEW. It is called "Cont Acq&Graph ExtScanClk D-Trig.vi" and it is located in the following LLB.
\Examples\DAQ\anlogin\anlogin.llb
Your project aligns very closely with a past project of mine. If you require professional expert assistance, feel free to call on us.
Daniel L. Press
Certified LabVIEW Developer
PrimeTest Corp.
www.primetest.com

IOS5 sync problems for iPhone4

IOS5 download sync problems for iphone4
Can't now get NOTES and CALENDAR synced, just deletes any information inserted since download. Furthermore some music files have been corrupted. My PC has Windows XP and IE8. Had no problems with previous iphone 3GS with IOS4.3. Could do with advice on solution or a fix (IOS5.1?) from apple.

Go into stiings >general > reset>reset all settings
wait for phone to finish process
i finally figured out after trying for 1 hr
enjoy

Can my Airport Express be used to extend the signal for an iPad2

I am using a Linksys wired router as the beginning of my home network. There is an ethernet cable running from it through a wall to the Xbox 360 and an Airport Express serving as the base for the wireless network. I have an iBook on the other side of the wall and about 10 feet and an iMac about 20 feet with one wall in between. These two have some fluctuation in their signal but only between 4 bars and 3. I just got an iPad 2 and it is causing me grief because it struggles to maintain a connection just another 10 feet from the iBook. If I put it next to the iMac when it has full 4 bars the iPad gets maybe 2. The iPad has full bars if next to the router. That kind of defeats the purpose of buying an iPad. So, my question is how to rearrange the network so the iPad is happy in the living room where I mostly use it. I had considered moving the iMac and using it as a base station to free the Airport Express for other duty but where I want to move it is further away from the living room. Right now the Airport is wired to the router. Is this necessary for it to be a part of the network? I know I can use it to get music from iTunes to speakers but would that placement also work as a wireless extender? Would just buying another router for the Xbox location and putting the Airport there also be a better solution?

ladybastet, let's clean up some terminology. You should designate only one router for your network. At present that is the Linksys. Your wireless access point is the Express, and it gets its network connection from the Linksys. Is that correct?
If I put it next to the iMac when it has full 4 bars the iPad gets maybe 2. The iPad has full bars if next to the router.
Now that you know your Linksys is the router, is the above correct? Unless the Linksys is also a wireless access point, the iPad's proximity to it will not matter. Only its proximity to the device creating the wireless network is a factor. In your case, I believe that is the Express.
There is an ethernet cable running from it through a wall to the Xbox 360 and an Airport Express serving as the base for the wireless network.
I'm not sure I understand. Is one Ethernet cable going to two places? What is it connected to, precisely?
Right now the Airport is wired to the router. Is this necessary for it to be a part of the network?
In the case of a wired router, yes.
I'm wondering if you have things configured properly, particularly if you have configured the iMac to share its network connection over AirPort. I'm even wondering if your iPad has unintentionally joined a neighbor's wireless network.
I had considered moving the iMac and using it as a base station to free the Airport Express for other duty but where I want to move it is further away from the living room.
Using the iMac to share a wired Ethernet connection to create its own wireless network is certainly possible, but it is less than ideal. For one, the iMac would have to be powered on all the time.
You do not need or want another router.
It is impossible for me to be certain of your network environment (meaning, the size and configuration of your home, the proximity of competing wireless networks, the number of network devices, and the potential for interference) but you might be better off replacing the wired Linksys router with an AirPort Extreme. That would give you the ability to create a "roaming network" or to use your Express to extend the Extreme's wireless network. I think this would be the easiest solution, but given the uncertainly of your description this expense may not be necessary.
Much of my confusion stems from your original question: "Can my Airport Express be used to extend the signal for an iPad2" - the quick answer is yes, but a prerequisite question is, "what signal?" The only "signal" I can determine that may be relevant is the one created by the Express. Once we have the terminology fixed, perhaps we can fix what's wrong with your network.

Making different signals for different color average of the pixcells

Hello, everyone.
I'll take image of paper money by webcam,
and get the color average of the bills
and fractionate the color average by wavelength range of each bills.
and I want to making signal releasing time differently for different color average of the pixcells.(to fractionate the kind of bills)
(I want different signal for different kind of bills)
my question is this:
(1)How can I connect the webcam to the Labview?
(2)How can I get the color average of paper money?
(3)How can I make Labview program for releasing different signals which has different releasing time for each color average?

Hi 박지성,
you can use the IMAQ for USB Driver. See this link http://zone.ni.com/devzone/cda/epd/p/id/5030. You can also use the integrated windows dll to get your picture.
Hope it helps.
Mike

Where do i get an original battery replacement for iPhone4 in India?

just wanted to know where can i get a genuine apple oem battery replacement for iPhone4 in India???

Take the device to an authorized repair facitility or Apple store (if there are any in India) and pay them to replace the battery. The device is not designed to be user servicable in any way. Apple does not sell parts.

No signal for iphone4's

Similar Messages

Maybe you are looking for