No signal found for mobile networks

My S4 isn't letting me call or receive calls at all. It says that mobile network is not available. My internet still works fine, and my texts will still send but only after a message comes up that says no signal found for mobile networks. I've tried restarting it and nothing changes, and I took the battery out for about 5 mins and put it back in and nothing helped. Anyone have a solution? Please reply

Hi Haynesga,
Let's locate your missing signal! I would be frustrated as well if my device was not working properly. What error message do you hear when you place a call? What zipcode are you in? Is Mobile Networks turned on http://vz.to/19NeRCA? Is Global Roaming turned on as well? Keep me posted.
Thanks,
PamelaF_VZW
Tweet us @vzwsupport

Similar Messages

Look for: components used for Service Brokerage (CSB) for mobile networks

I am looking for developers/company offering components used for Central Service Brokerage (CSB) for mobile networks. It aims to store consumer profiles and directs service requests (shopping, travel & meeting services, hospitality and insurance) from mobile consumers to connected retailers and appointed service providers.
I would be higly interested in almost ready to use components/architecture which can be used in new service/start-up situation.

Hey Anthony,
Yes, a lot to read, thanks for reading though!
For the External Web Services, since I have it set to fe-pool.domain.local right now, I figure this is as simple as flipping it to fe-pool.domain.com within Topology Builder | Enterprise Edition Front End Pools | Edit properties | Web services?
After which, I assume I will need to create a new host A record for fe-pool.domain.com, pointing to the Pub IP 1.2.3.4 I have set up to forward directly onto my FE Server of 18.20? I am a bit of confused as to how this external web service is contacted,
does the mobile app use lyncdiscover.domain.com to find this information? In other words, does the lyncdiscover allow the mobile app to get inside the topology, the topology reports to the mobile app that "Hey, fe-pool.domain.com is going to be your External
web service as defined in the topology" ? If its just that easy this should be a quick change.
As for your next question, on the F5 level I'm pretty certain it is just set to take any packets coming in from pub IP 1.2.3.4 : 80 or 8080, or 443, or 4443, to allow it to go to that FE server IP on any of those ports. I don't believe it is actually taking
a 443 packet, and converting it into a 4443 destination. Also note, I am forcing lyncdiscover to use port 80, instead of 443 because I am unable to get a new pub cert with the lyncdiscover SAN.
As for the domain user, it is simply just my single user and I am flipping the SIP domain in the control panel within the user properties. domain.com and domain.local are both configured SIP domains in my topology, however i have domain.com as the default.

Signal icons for available networks on wifi tab are missing :(

ive been having this problem since i upgraded to mountain lion.. the signal icons for available networks on wifi tab are missing..i do not have any problem with my connection but it would be better to see signal status before i connect to any available network....this is what it looks like...

i did that many times but its still not working . its only for the icon on the menu bar which i have...i'm missing those signal icons beside the lock icons when im trying to search for available networks. ..if you could notice the above photo, i encircled it..the lock icon is usually accompanied by a status signal icon but its now gone....

How to set static IP for mobile network?

Hi all,
Can the Incredible 2 be set to a static IP address when connecting to mobile networks?
I want to use my phone to connect to my PC using the Wireless Hotspot feature and give me a static IP address so I can register it with one of my work applications.
Thanks
Bill

I was able to change the HotSpot ip address by going to your hot spot and tapping the menu>advanced>LAN Settings. You should be able to change the IP address and Starting IP address from there. One thing I did notice is that Verizon is assigning the DNS to the hotspot itself which is iffy. Change the DNS setting on the laptop/Ipad or what have you to the universal DNS's that are already out there.

App for mobile network

Is there a app you can put on the phone on one of the screens to quickly turn on and off mobile network

@chas4x4
You are using the Droid Incredible, right? I would assume so since you posted this in the Droid Incredible board. HTC included in the Sense UI a handy widget that turns the mobile network on and off with one click. The only time you wouldn't have access to the widget is if you had another launcher loaded on the phone.
http://www.mydigitallife.info/2010/04/30/how-to-turn-off-and-disable-mobile-data-connection-2ggprsedge3g-on-android-phone/

Frozen Screen Once I turn on the radio for mobile network

I downloaded 7.1 via wireless on my torch and ever since have nothing but headaches. The torch will not connect and totally freezes when I turn on the network mobile within network connections and my sim card is loaded. If I take the sim card out of the phone and place the battery back in the phone will unlock and allow me remove the mobile setting from on to off.
Any ideas?

Hey blackhawk24,
Welcome to the BlackBerry® Support Community Forums.
I would suggest backing up and doing a clean reload of the BlackBerry® device software as shown here: http://btsc.webapps.blackberry.com/btsc/KB11320. Please test before restoring any data to the device.
If this resolves the issue do a selective restore of essential data (Address Book, Calendar, Task, Memos, BBM contacts etc.)
How to use BlackBerry® Desktop Software to restore data to a BlackBerry® smartphone from a backup file
http://btsc.webapps.blackberry.com/btsc/KB10339.
If the issue still persists after the reload, further investigation might be required. To help further diagnose the cause, contact your wireless service provider or BlackBerry® Technical Support Services for further review and support.
Thank you.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

HT4623 support active Iphone 4s for mobile network at vietnam!

I'm Long, in Vietnam !
I have buy iphone 4s in the japan. Can Apple help me to active it with network mobile at vietnam?
Thank you very much & Good clucky to Apple!
<Personal Information Edited By Host>

All iPhones sold in Japan are carrier locked. The Japanese carriers do not offer unlocking.
Buy a new phone you can use. You can not use that on on a carrier in your country.

BB 9330 - turning off mobile network data services causes BIS WiFi connection to change to not connected

re: v. 6.0.0.719 bundle 3084 platform 4.4.0.560 update
1. History.
a. Received BlackBerry Curve 9330 out of the box with bundle 2333 installed (but missing Verizon Visual Mail Message app.) Installed BB Desktop Software on laptop, connected smartphone to PC, Attempted to install bundle 3084, but initialization apparently failed, phone still showing bundle 2333 installed and no VVM app. Browser app unable to connect to network. On second try was able to complete 3084 install. Still no VVM app. Now some times the browser connects, sometimes it does not. Browser not connecting appears to be BB software bug. VVM issue appears to be one for the service provider.
b. Data service is currently Verizon BlackBerry Social Messaging Data Package which is suppose to have BlackBerry Internet Services via WiFi per Verizon FAQ doc.
2. Problem. With an active WiFi connection the Browser app is not connecting via WiFi giving a error message that WiFi service is required.
Investigation found if mobile network data service was turn off in Mobile Network Options, the BlackBerry Internet Services connection status was changed from connected to "WiFi" to "not connected". Browser appears to work ok when mobile network data service is turned on. BIS connection to WiFi comes back on. Not sure at this point if web data is going via mobile network or WiFi.
I am wondering if other BB 9330 Verizon users are seeing the same symptoms.
Bill
P.S. I could not find where to report this apparent software bug. So I hope is the right place.

If you have your Mobile Network as well as Wi-Fi turned on, your phone will default to the Wi-Fi for browsing (assuming you have a strong Wi-Fi signal). Leaving both on will allow you to browse as well as receive calls and texts.
I hope that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

HT1807 got an unlocked iphone 4s bt it asks for activation required via a wifi or mobile network each time i put a new sim. wat if i put in a sim which doesnt have 3g and i dnt have any wifi around me? how do i activate it then?

I am living in uk at the moment and i have an unlocked iphone 4s. Each time i put a new sim in it a message appears saying ''Activation Required''. When i slide the unlock bar it asks to choose a wifi network or a mobile data network. So far this hasnt been a problem coz i always found a wifi network around me or the mobile data network worked fine. Now the problem is I am moving back to my country Bangladesh in couple of days. And back there wifi isnt a very available thingie. And mobile data network is very hard to connect. So if i put on a Bangladeshi mobile service sim in my phone how do i activate it without the wifi or mobile data network? Please some help asap would be much appreciated.

Hi Allan,
Sorry for the rant up there.. Thanks for your quick response. I couldn't get to an Apple store and can't order anything from the States that contains Lithium ION batteries -- no U.S. Postal Services will deliver these to us anymore. Target sold this to me as an unactivated Sprint phone. I never activated it through Sprint in the States and just took it to Germany with me. I updated to vs.6.0 via ITunes and without the Sprint SIM Card installed. The IPhone is now accessible (Apps, Settings, etc., to be able to check firmware, et al., settings. However, I can't tell if it's unlocked (since I upgraded the version without the Sprint SIM Card installed) until I go to the local cell phone shop and stuff in a BASE (provider) SIM card and test it out. Is there a way to tell whether or not the phone is unlocked without a SIM card in it? I don't think there is....

My iPad 2 has stopped picking up mobile network signals once it moves out of a WIFI zone. Please advise

My IPad2 has stopped picking up mobile network signals once it moves out of a WIFI Zone. any possible reason?

Unbelievable.
After taking all the time to write and post that, I then switched "airplane mode" on and off again and it started picking up the 3G signal fine.
I had read a couple of threads about Ipads / Iphones "locking" onto GPRS and this being the only way to switch them back, but I DEFINITELY tried this before the IOS 7 upgrade and it didn't help.
So was it just a coincidence this time or did the upgrade make a difference? No way of telling I suppose so no help if you're reading this looking for a solution. I can only keep an eye on it and see if this becomes a regular problem......

Issue with mobile network signal ("Searching")

I recently purchased 2 iPad from Singapore and upon retuning to Malaysia, i applied for 2 mobile broadband package from the same mobile provider.
Issue i am facing is, on one of the ipad, the mobile network signal bar displays "Searching" almost all the time; only a few times it displays strong signal with 3G icon then it drops to "Searching" again. I tried to swap the micro sim around between both ipad but no such issue on the 2nd ipad which is consistenly strong signal.
I even restored the ipad (factory shipped 3.2.2) but no success.
What should i do?

After further test, I noticed the unit can't find any mobile provider under Settings > Carrier when signal bar displays "Searching".
Enabling airplane mode does not help either; only workaround is to disable Cellular Data under Settings > Cellular Data then Enable it again.

Z30 - Mobile Network signal issue

Hi!
i am using Z30 for last about 2 months.
facing problem in dropping and varying mobile signal strength,
while other devices incl. older BB devices are showing steady signal strength at same place same time.
also facing call quality deterioration while calling
please....help!!!

deebee11 wrote:
sorry....omitted to mention..
online through flipkart...pvt online shopping...
OK, and if you will, please look at the Settings > Network and Connections > Mobile Network.
Tap the Network Technology. What do you have set there, and what are the other choices?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box

When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.

When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.

NI Measurement Suit for Mobile/Fixed WiMAX 1.0 , is there any optiion to enable PUSC or AMC for the generated signal?

Hi.
I am using a NI VST to generate WiMAX signal. I have installed NI Measurement Suit for Mobile/Fixed WiMAX 1.0 on the compute. But I can't find any option on the front pannel of the generation suit to enable AMC or PUSC for generated signal. Does such feauture exist at all?
Thanks.
Solved!
Go to Solution.

Hello sam2013ni,
This is all that I am seeing for AMC and PUSC. Look in 'Zone Type'.
Best regards,
K. Anderson
Applications Engineer
National Instruments

X200T mobile broadband setting for Three network

Hello all
I have recently downgraded my laptop (X200T) from Vista to XP, and overall I am very happy with the good old XP.
However, I am having a trouble with the mobile broadband.
I have got a SIM card for mobile broadband from Three network, and have been using it without any problems in my previous OS: Vista Business. However, since I downgraded my laptop to XP, I have not been able to use it through ThinkVantage Access Manager. I have tried to resolve this problem by editing WAN settings in the programme, but failed.
Has anyone else experienced and fixed the same problem? I would very much appreciate if you could share the solution with me.
Thanks in advance.

cwbaker wrote:
Hi. I am using a Galaxy S3 and I am on the THREE network. I can receive e-mails no problems but not send them.
Is there a seting I need to change? Basically, THREE have said this. Help please.
Do they support email forwarding via third party?
- Do they support outgoing email traffic via any other port other than Port 25 or 587, 465 or 486?
Hi. Welcome to the forums.
I assume you are referring to sending "three" emails via BTYahoo! ?
What error message are you receiving when trying to send ? Typically ISPs (probably as well as mobile type companies) prevent non connected users from using their mail servers. So in order to send "three" emails you need to go through address verification using your BTinternet email address. See my shortcuts, link below, option 0e
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

No signal found for mobile networks

Similar Messages

Maybe you are looking for