No Signal from Lexicon Omega to Logic Studio

I'm not getting a signal in Logic Studio from my Lexicon Omega. I'm getting output from Logic to the Omega but not input from the Omega to Logic. I went to Preferences/Audio and change the inputs to the Omega but still the meters in Logic don't respond to my speaking into a mic. The meters on the Omega light up and sound comes out my monitors but no signal to Logic. Any help?

JG99 wrote:
Have you record enabled an audio track in Logic and set the input to the same as the input from the Lexicon?
What do you have connected to the input of the Lexicon?
JG
If by record enabled the track you mean "clicked the little "R" and made it red", yes I did. The track in Logic says "Input 1" above it and I'm pretty sure that's the Lexicon's input.
I have my mic going into the preamp going into the Omega going to my Mac.
Please bare with me...I'm a Logic n00b! Thanx!

Similar Messages

No signal from lexicon omega

os 10.6.7 \ logic pro 8
I have a lexicon omega that I get signal from mic & the other inputs through the unit, but when connected to my macbook [usb] I cannot get anything to come through to record. I currently do not have garage band or other recording software to cross check.
I installed the newest digidesign [7.4.2] core audio drivers, and still no input signal.

there are no osx drivers for omega, the core audio files from digidesign were recomended from a logic pro board I posted having these issues on.

How to receive signal from Roland RD300SX in Logic Pro 8??

Hello everyone,
I have problems with setting Logic to receive any signal from my piano - Roland RD300SX.
I have installed the drivers for the piano and was hoping that Logic will simply "see" it, but unfortunately it doesn't.
I have been looking for information in the Logic manual, clicking and unclicking many options for the last few hours and nothing seems to work.
When I enable input monitoring all that happens is to receive signal from my built in microphone.
I know that the USB cable works well because when I go computer information I can see Roland being plugged in to one of my USB ports. So this must a Logic setting problem...
I will be extremely grateful for any information and help!!
Thank you in advance!!
All the best,
Natali

Sampleconstruct thank you for your answers, I finally found the solution.
The Roland was not appearing in the Audio Midi Setup and it wasn't recognized until I changed one setting in the piano itself. Despite the fact that I had a CD with the USB drivers which were set up in my computer, it finally worked when I switched the USB driver setting into the "Generic" one (which means that it doesn't use the drivers from the provided CD but the ones of my OS). I don't know why it prefers the OS drivers since there is a CD provided especially for that reason, but the most important is that everything works now!:)

Logic Studio 9 Not Installing on G5

I know Logic 9 is not fully supported on PPC G5's but I also know people have installed it without any issues. I'm trying to do an upgrade from Logic Pro 6.4 to Logic Studio 9 on a PPC G5 w/dual 2.0ghz processors. I start the set up and when I get to the screen where you enter your Serial # for L9 I type it in, and hit the 'continue' button and the progress wheel starts to spin. And that's it. It stays there and never goes to the Installation Type page. I called Apple support and the first guy I spoke to sent me a link check if my XSKey had any issues (Logic Pro: How to use the XSKey Updater) I ran that and it found no issues. I called back Support, and the guy I spoke to told me that L9 can't be installed on PPC's, and there was nothing else they could tell me but to upgrade to an Mac Pro or use Logic 8. Can anyone give me any suggestions on how to proceed? I can't return Logic 9 now since its open and its useless right now. I know this software works on this computer.

No release of Logic Studio 2 (Logic Pro 9, MainStage 2) was supported on PowerPC, Apple always clearly advertised it as Intel-only!
However Logic Pro 9.0 up to 9.0.2 could be installed on a PowerPC anyway, because it still had that code (as an undocumented feature). This went away - if I remember correctly - when the 64-bit version of Logic Pro 9.1 arrived. From that point on Logic Studio no longer contained any PowerPC code. Any Logic Studio box sold in the last 1.5 years can not be used on a G5, no chance.

How do I get signal from my Roland Fantom G8 to Logic Studio or GarageBand?

My computer recently crashed, and since then I have not been able to record any music into either Logic Studio or GarageBand. I need to get back up and running ASAP, as I'm in the middle of recording music for 5 different projects. Here's all the gear that I have:
-1 Roland Fantom G8
-1 iMac with Logic Studio and GarageBand
-1 M-Audio Fast Track Ultra
-2 Rokit KRK Monitors
-1 USB cable
-1 midi cable
-2 1/4-inch cables
-2 1/4-in to XLR cables
The 2 1/4-inch cables run from Balanced Outputs 1 and 2 on the back on the Fantom G8 into Inputs 1 and 2 on the back of the Fast Track Ultra. The 2 1/4-inch to XLR cables run from the back of the 2 KRK monitors into Outputs 1 and 2 on the back of the Fast Track Ultra. The Fast Track Ultra is powered via USB cable that runs into a USB port on the back of my iMac. The midi cable runs from the "Computer" port on the back of the Fantom G8 into a USB port on the back of my iMac. This is the exact set-up I had before my computer crashed, and I was able to record just fine. When I open up the audio preferences on either Logic Studio or GarageBand now, it recognizes the Fast Track Ultra; however, it does not recognize the Fantom G8. What I'm trying to do is get signal from my Fantom G8 into both Logic Studio and GarageBand. I also want that sound to then project through my KRK monitors. I also want to be able to record audio and midi. Please help me!!!

I used the Fantom for several years and did exactly what you want to do. I simply plugged my Fantom into a channel on my mixer, in your case the 003. I ran a firewire out of my mixer (Presonus Studio Live) into my computer using Logic Pro X. Then I just assigned that incoming channel to a channel strip in Logic. As an example I used stero channel 9/10 on my mixer, (plugged in the Fantom here). Then the signal went via my mixer firewire to computer running Logic. I assigned my channel strip input to channel 9/10.
Does this make sense?
I just sold my Fantom last week and purchased a new Yamaha Motif XF8. Now I am trying to figure out the same thing on it.

My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

http://support.apple.com/kb/TS2005
http://support.apple.com/kb/HT1861
https://ssl.apple.com/support/proapps/serialnumbers/

HT2375 how do I uninstall logic studio from my macbook pro?

i need to uninstall logic studio from my computer to make more space on my drive. I want all the programs associated with logic studio gone.

Open Print & Scan preferences. Select the installed printer in the list. Click on the Delete [-] button below the list.

HT204266 is wave burner included with the download of Logic Studio from the app store?

is wave burner included with the download of Logic Studio from the app store?

Hi HandletheTruth.
I will be able to assist you.
The MF Toolbox 4.9 software supports scanning in the document using OCR processing; however, you will need a separate OCR software that will allow you to edit the software.
I hope this information is helpful to you. Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

The synth pad sound Warm Pad has changed after upgrading from Logic Express 7 to Logic Studio

Hello!
I have composed a lot of songs over the years using Logic Express 7, and my favourite synth pad sound there was a sound called Warm Pad (from the EXS24 Sampler).
A half a year ago I upgraded to Logic Studio, mainly because I needed WaveBurner. Happily, all my songs sounded exactly the same after the upgrade, except from 1 sound: The synth pad sound Warm Pad. It still got the same name and location, but the sound was replaced with a very sharp and much more distinct sound (not warm at all, in my ears at least).
I have tried to replace it with different synth pad sounds from the EXS24 Sampler, and the one I find to come most close to the old Warm Pad from Logic Express, is a synth pad sound called Pad 1. Still, I don’t think it sound exactly the same.
So, in order to finish all my songs and make an album, I ask you for help:
1. Do you know how I can get EXACTLY the same sound as the old Warm Pad Logic Express, with my new Logic Studio?
2. Have you experienced the same with sounds, after upgrading from one Logic version to a newer one? And what have you done to find back to the old sounds?
I will be VERY thankful for help, because I am not a genius in the mysterious (but yet exiting) world of synthesizer synthesis.
Best regards,
Asle
Composer, guitarist and entrepreneur
Norway

I have the boxed version of logic studio.
When you install, if you pick the "ad hoc" installation you can add the logic7 patches to your existing patches.
I think running installation again you should be able to install just that.

Problems upgrading from Logic 6.4 to Logic Studio

I recently had my hard drive die, so i am now in the process of reloading all my software. I started with Logic 6.4 years ago and have been purchasing the upgrades ever since. I first installed Logic 6.4 with the dongle inserted than i installed Logic studio. I than updated the software. However, now Logic will not open. I get the prompt;
"Upgrading from Logic 6.4 to Logic Studio running 10.6.7 2.66 i7 17 inch running problem. After install Logic will not open. Updated all the software. On a Macbook Pro"
Is there something i'm doing wrong.
thanks for any help.
David

Choose About this Mac from the Apple menu, check if the computer has at least 2GB of RAM, and if it does, click here and order a download code for Lion 10.7. Doing this costs money; you may find it easier and cheaper to upgrade to Yosemite, which is free.
Back up your data and check your applications for compatibility before upgrading. In particular, Mac OS X 10.7 and newer don't support PowerPC programs such as versions of Microsoft Office prior to 2008.
(122702)

Is there a way to download Logic Pro 9 from the app store, as I have already purchased the Logic Studio CDs?

Hello!
I purchased the Logic Studio CD set in a retail store two years ago or so, and I was wondering if there was a way to have the app store recognize this purchase so all I need to do is download Logic Pro 9 from the app store when I get my new iMac (without a disc drive) this month?
Thanks much,
Elliott

Hi
Short answer: No. You cannot convert "DVD" licences to Appstore ones.
I'd suggest that you:
Make Disk Images of the DVD's on your current Mac, and use those for future installs
Make use of the "Remote Install"/DVD drive sharing feature
Buy and External DVD drive
CCT

How to install quicktime 7 pro from logic studio

hello people.
I have installed Logic express 9 and then upgraded it to Logic Studio. Logic site do state that quicktime 7 pro is included in the Logic studio package. I have installed everything from the dvds, but i don't see quicktime 7 pro appearing anywhere. Anyone know about this?

I have installed Logic express 9 and then upgraded it to Logic Studio. Logic site do state that quicktime 7 pro is included in the Logic studio package. I have installed everything from the dvds, but i don't see quicktime 7 pro appearing anywhere. Anyone know about this?
Logic Studio may only "key" the QT 7 player for "Pro" use. I.e., Apple is very touchy about others distributing their software. In any case, I suspect Logic Studio may expect QT 7 v7.6.6 to already be installed on you your system in its default "Applications > Utilities" folder location. If it is not there, then you will have to download it manually at http://support.apple.com/kb/DL923 and run the installer since QT X v10.2 (included with Mountain Lion) cannot be upgraded for "Pro" use.

Will Logic Studio 2.0 run on OS X 10.7.5? I'm about to install from disks...

Will Logic Studio 2.0 run on OS X 10.7.5? I'm about to install from disks...

Yes....
You may need to run Software updates as soon as installation is complete and before running LP9 for the first time..however.. as 9.0 doesn't seem to run well under later OS X versions than Snow Leopard...

Installing Logic Express from Logic Studio Package

Does any user, or Apple, know if it's possible to performa a Logic Express installation from my Logic Studio package, i.e. not the whole Studio installation, but the limited version?
TIA,
-gg

In the installer simply untick everything you can untick and you should be able to do a "skeleton" install of about 7.5 GB. It'll still be Logic Pro though, not express. But installing the app only is not possible, some content +cannot be deselected+ in the installer.

Going from Leopard to Snow Leopard - Logic Studio 8 license question

Hello everyone !!!
I'm currently running Leopard on my MacBook and I'm planning to upgrade to Snow Leopard by performing a clean install of it.
My question is:
Will I lose my Logic Studio 8 license or any features, like the upgrading to Logic Studio 9 one, if i do it that way ?
Thanks in advance.

If you wipe Logic by doing a clean install, then Logic will ask you to re-enter your serial number just as it did on first installation.
if you originally upgraded from LP7, it will probably also ask you for your original XSkey as well.
As long as your have your serial number, then there is no problem doing a clean reinstall.

No Signal from Lexicon Omega to Logic Studio

Similar Messages

Maybe you are looking for