No signal on monitor after Windows 8 logo

I have a Lenovo H430-2558-1ZU desktop running Windows 8 Pro with Media Center. It orignally came with Windows 7. I was using it then all of a sudden the video went dead and I got no signal on the monitor. I restarted and after the Windows 8 logo, I get No Signal on the monitor. Windows 8 is running because I can hear sounds from the speakers. After using this method, I booted into safe mode. I uninstalled the Intel HD Graphics driver from safe mode and restarted in normal mode. It was fine for a few minutes, but then I got no signal on the monitor. So I booted into safe mode again and uninstalled the driver. I installed a new driver from intel's website, but I still have the same problem. I tried to uninstall the monitor driver, but still have the same issue. The monitor is connected to the computer's HDMI port via an XtremeMac HDMI to DVI cable. The monitor is a Viewsonic VX1945wm I've used for many years. I don't think this is a hardware problem, because my Ubuntu install works just fine. I'm at a loss here, IDK what to do. Please help!
Solved!
Go to Solution.

Hi seagdude,
Welcome to Lenovo Community Forums!
I’m sorry to hear that monitor is displaying blank screen with “No Signal” error message even after re-installing the Graphic drivers the issue is same and the H430 is not working as expected in Safe Mode as well.
This seems to be compatibility issue with Windows 8 and as driver re-installation is done and the issue still persists, re-install the Operating System will resolve the issue using the Windows 7 recovery disc that is made when the computer had pre-installed Operating System in it.
NOTE: Please backup the data before performing OKR as the computer will be re-installed to its factory settings.
If recovery discs are not created, please contact our Telephone Support team for the further information, I’m sure they will be a great help.
NOTE: I have private messaged you Contact details of TFN(Toll Free Number).
Do post back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

Acer XB270HU black screen after windows logo for about 20-30 seconds

Hi all,On a fresh and fully up to date OS (Win 7) with 2x GTX 980 Ti I have an issue where the screen goes black (No Signal) just after windows logo. Im using UEFI SDD boot flow, have secured boot disabled. Im connected with DispayPort 1.1 (not sure if that matters). This issue did not occur after getting to Windows just after the reinstallation of the OS (no drivers, no updates). It started to occur after the OS got fully up 2 date. Any ideas? As Im losing 30 seconds on boot-up with UEFI so it feels like IDE....

I also have the same issue, it only started a few days ago and ive had it for 2 weeks. Sometimes when I start up the computer, it will say no signal and my secondary monitor will turn on and take its place as the primary monitor. A restart will fix this issue, but then my Acer goes black, says no signal, comes back at a resolution of 600:800 and then 1920:1090, and changes again to its native 2560:1440.
Not to mention G-SYNC does not work at all on my monitor. I can't beleive they charge $1,000 for this extremely mediocre at best monitor

My laptop become blue screen after windows logo, after i update the graphic ati and intel driver

I have constant blue screen after windows logo and i have updated all drivers. i was upset the blue screen didn't go away and i did the factory reset. For my suprise, it didn't solve the problem and then i repair it at the comp shop. it was installed with windows 7 home premium 64 (pavilion g4 1006tx) bit as the pre installed windows and activated with the key back on sticker. I updated all drivers and i noticed every time i update the ati and intel driver it will go blue screen after windows logo. after i uninstall it at in safe mode it can load normally. My question is there any solution for my graphic card or is it already damaged? or any other hardware problem? please because i have to use high graphic as i use photoshop

hii
make sure you download and update correct driver version of graphic
and know spec
more:
http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g4-Notebook-PC-series/5046252/model/5068...
try to instal "AMD High-Definition Graphics Driver" only
and uninstal "Intel High-Definition (HD) Graphics Driver"
Wisnu Suryandi

G62 b05sd screen goes black after windows logo

Hello,
My laptop has been turning of at random lately and now the screen turns black after the windows logo appears, though the start-up tune can be heared. I've tried connecting it to different external monitors yet it doesn't work. I've been able to start-up in safe mode and tried updating BIOS using both HP support assistant as well as manually. HP sup. ass. also doesn't indicate updating anything. The battery is essantially dead, yet i've used the laptop for a long time using the adapter only.
My next step is to do a windows system recovery, but I want to see if the issue can be resolved differently.
Thnx

Hi @frankkilsdonk ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP G62-b05SD Notebook and issues with freezing on the Windows logo. It is trying to load something . I would look at what is in your startup file in Windows.
You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook. If you installed new software on the Notebook you might want to uninstall it as this could be the issue as well.
When performing a System restore please note remove any and all USB devices. Disconnect all non-essential devices as they can cause issues.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

MSI R9 270x OC edition 4gb - black screen after windows logo

Good afternoon,
I am the proud owner of 2 x MSI R9 270x OC edition 4gb cards, One is working a treat, the other is not.
When I use on of them, I get the boot screen (the one with the option to go into the BIOS), then I get the Windows logo, then nothing but a black screen, output from the card is detected by the monitor (green light at the bottom instead of stand by) but nothing else. the other card works perfect on its own.
They are both detected when I run windows in safe mode.
This also happens if I run crossfire on both cards.
SN/ 602-V303-095B1312011152 (this is the good one)
SN/ 602-V303-095B1312011157 (this is the bad one)
Could this be a BIOS issue?
Main Board: ASUS P8Z77-M PRO
Bios Version:Version:
Video Card: msi R9 270X OC edition 4gb
PSU: XFX750 pro
CPU: i5-2500K CPU @ 3.30GHz
Memory: Corsair Vengeance 16GB (2x8GB) DDR3 1600 MHz (PC3 12800)
SSD/ HDD: 120GB SSD, 1TB HDD, 150GB HDD
CPU COOLER: Cooler Master Hyper 212 EVO
Operating System: Win 7 Ultimate 64bit

Quote
When I use on of them, I get the boot screen (the one with the option to go into the BIOS), then I get the Windows logo, then nothing but a black screen, output from the card is detected by the monitor (green light at the bottom instead of stand by) but nothing else. the other card works perfect on its own.
you mean when you use one of them only or?
Quote
This also happens if I run crossfire on both cards.
SN/ 602-V303-095B1312011152 (this is the good one)
SN/ 602-V303-095B1312011157 (this is the bad one)
can you save and upload both vbioses and give a link to it?

Black Screen after windows logo

Good evening. So i got a bit angry and kinda hit my laptop...then the screen had some green lines on it so i switched it off, after that after switching it back on the screen goes black after the windows logo i am only able to see the cursor. If i use safe mode it works. So i don't know what to do. Thanks in advance guys.

Hi,
At this point, my best guess would be a problem with the HDD. This would be consistent with damage following an impact and with the notebook being able to start in safe mode ( less read/write load ) - it would also explain why the uefi diagnostics throw an error as it needs to access to the HP_TOOLS partition.
When in safe mode, you could try disabling all start-up items and services ( apart from Microsoft services ), then reboot and see if it will load any further - if it does then manage to load the OS, this would tend to confirm that the issue is with the drive and it'll need to be replaced.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Black screen after windows logo problem

Hi people, i have the HP Probook 4530s LH306EA and i have been using it for 3 years without any problems but this week after i did a restart on my laptop i got a black screen after the windows logo.
The problem is whenever i install the AMD Display driver it says that there were some errors during the install and the pc freezes and restarts into a black screen...
AMD Display drivers 13.152-130830A-162882C(18 Oct 2013)
Windows 8.1 64bit
Is there any solution to this or some other drivers?

you wouldn't by chance be attempting to use a Sandforce controller using SSD?
please list your components >>Posting Guide<<!
See my signature below for guidance
--------------------vvvvv--------------------

MSI RX9250-TD128 Problem: Jumbled video at top of monitor after windows starts

I'm trying to intsall my new MSI radeon 9250 128MB video card in my year 2000 vintage Dell dimension 750 series desktop.
I've tried installing all of the drivers provided on the driver cd and I keep getting the problem of a jumbled bar of video displayed at the very top of my monitor once Windows starts up i.e. once display would go to 1600X1400 or whatever.
I am able to boot up in safe mode.
About my computer:
Windows 2000 professional
750 MHz pentium iii processor
340 mb ram
an AGP slot that fits the card (im not sure what type, anyone know how i can check if it is 2x 4x 8x?, i don't think this is the problem though because it is supposed to be compatible with 4x)
note: when i open up the device manager and go under display adapters, radeon 9200 series.. the "general" tab says that there is no driver installed. However, when I look under the driver tab, it lists the driver that is installed and the various driver files that are installed.
another note: in the device manager there are two display adapters, "radeon 9250" and "radeon 9250 (secondary)" i tried turning the secondary off and it didn't solve the problem
Also, is there an MSI technical support email that works? I've tried emailing [email protected] from two different email accounts and I'm getting it returned.
Thank you

Quote
Also, is there an MSI technical support email that works? I've tried emailing [email protected] from two different email accounts and I'm getting it returned.
http://support.msi.com.tw

System reboots within seconds after Windows logo

Hey guys. I am trying to help out a buddy of mine. He had just bought new parts last nite from NewEgg. He has not got the system to work at all out of the box. He says everytime it reaches the Windows logo wheither it tries to boot to safemode or regular mode, it will reboot on him. I am at wits end trying to figure this out. He has tried all possible settings in the bios. He cant even boot of cd either but booting off a floppy seemed to work. Odd thing is even with no other drives connected with just cdrom connected, it still attempted to boot to windows and reboots everytime.
I dont have all his details from his specs but here are some details he does have below that I know. Can you help me please? Any ideas be helpful? Is it incompatible cpu or is the power suppply not powerful enough for his system? Also in the bios the temp shows 65 C which seems to be awful high. Dont even know if that is reporting correctly or if thats causing it reboot each time. He didnt see any settings to disable it so doesnt reboot when hits certain temp.
MSI K9N4 Ultra-F Socket AM2 NVIDIA nForce 550 Ultra ATX AMD Motherboard - Retail
AMD Athlon 64 X2 3600+ Brisbane 1.9GHz 2 x 512KB L2 Cache Socket AM2 Processor - OEM
XFX PVT73GUGF3 GeForce 7600GT 256MB 128-bit GDDR3 PCI Express x16 Video Card - Retail
400 Watt power supply
dvdrw
250 GB ide hard drive
80 GB SATA drive(doesnt matter when if this drive is connected, same problem)
floppy drive
PLEASE HELP!!!

Well he still cant get the system to boot correctly. He has got the paste reapplied and got the temp showing little down but I really dont think thats the main problem. Even without that SATA OS previous install, and tried to install brand new hard drive to load XP or Vista, he cant boot off the cd. Wont recognize it, system doesnt hit Windows logo anymore and instead gets the message of PXE media failure, check cable. Thinking he is getting that message just because no OS is installed right now. He then tried to boot off 98 startup disk and load XP, not even sure if thats possible. When it was running and running and running, took like over an hour to complete the format and started to load setup files but it completely stopped and would not load any further. He already checked the boot device sequence. He has tried floppy first then cdrom and vise versa with hard drive 3rd but still he can not boot off a cd. These are the same cds he is able to boot off any other system such as laptop with no problems.
What in the world can he try next? Hes about to take a sledge hammer to it. Really not even sure of all the bios options but he says he has tried everything. Something cant be configured right. He has AMI Bios and no idea where to even find screen shots of his actual bios he has online of options to try next in bios. Any ideas guys? If you need more information, please ask.

Extended monitor after windows 8.1 upgrade

My Pavilion g6 laptop just auto updated to windows 8.1. Now my extended monitor does not work. How do I get the extra monitor to work again? This laptop screen is dinky and I can't see it very well.

Hello Notebook1763,
Welcome to the HP Forums!
I understand your extended monitor will not work since updating to Windows 8.1. Please make sure that you are following all of the recommendations in this HP document: Connecting a Monitor, Projector or TV (Windows 8)
If that doesn't help, make sure that all your drivers are updated for Windows 8.1. The HP Support Assistant can help you with: Downloading or Updating Software and Drivers for HP Computers
If this doesn't help, please provide the model number of your computer. If you require assistance locating this information, please reference this website: Guide to finding your product number
Mario
I worked on behalf of HP.

Blac kscreen after windows logo - broken graphics card?

Model: HP Notebook PC G62-b41EO
Product: XX509EA
Windows 7 Ultimate (Originally Windows 7 Home Premium)
While editing a video for YouTube, I got a bluescreen and my notebook PC shut down. When I restarted it everything was normal, until Windows had loaded, and after that everything went black.
I am almost certain that this is a graphics card problem:
* When I disable the graphics driver in the Windows Device Manager I can start the computer normally.
* In the device manager I get an error message on the GPU, saying that it couldn't boot because it isn't functioning properly.
The graphics card is an ATI Mobility Radeon HD 5470 Graphics (switchable)
I tried several things, nothing has worked:
* Updated graphics driver
* Did a system restore, reinstalled operating system
* Did a system check in startup options
* Did a hard reset
* Connected an external display, this caused another bluescreen.
My guess is that the graphics card just had enough and died. My 1 year warranty period is over. What can I do?
This question was solved.
View Solution.

The only fix is a new motherboard or have the motherboard repaired.
This ebay seller is an example of the services that are out there. You can save quite a bit if you can remove the motherboard from the chassis:
http://www.ebay.com/itm/Hp-Compaq-g72-g71-g62-g61-cq72-cq71-cq62-cq61-Amd-Motherboard-Repair-Service...

V570 black screen after windows logo

Laptop worked fine till yesterday evening, after that when I power on the laptop, during startup I get windows repair screen and it's ran for 1 hr and then it restarts laptop by itself, from then on after I power on the laptop after initial windows screen I get black screen. I tried take out battery, press power button 30 secs and start again... Nothing worked yet.
Any idea to resolve the issue. Thanks.

Dear Rocky
Welcome in lenovo community
We recommend to perform the recovery as last option , please let me us know if you are not aware with the recovery steps
Waiting your kindly reply
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Ms 6777 v1 Video goes out after windows logo screen.

Im pulling my hair out on this
I have an MS-6777
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=437
I have done a REFORMAT and INSTALL.
I have used all the newest dirvers for the bard from nVIDA .com.
I also have used the newest VIDEO drivers from nVIDA com.
At some point, random, I loos my video. I can get video by booting into fafe mode. But it always goes.
Any help on trouble shooting this?

Quote from: Fredrik Åsenius on 02-August-05, 00:56:07
Good evening!
A What parts have you got, except mobo? What is your PSU capable of in max. amperes? There is a list on the PSU with voltages and amperes.
B Are all parts new? A repair install is needed if the mobo is new.
C For how long do things work in SafeMode? Do you have the time to do anything, like installing mobo drivers before installing the graphics drivers? Do not rush updating graphics drivers till you have a stable system.
A. Athlon 1.34Ghz 256DDR PSU info 3.3v 28A / 5v 30A / 12v 15A
I know this is a crap PSU, but I was told it would just be lacking in the USB department.....and we dont need that. This is just a work station.
B. All parts were bought NEW. But that was 1 year ago. I formated the drive to have an OS in a clean state.
C. they seem to work for ever in SafeMode. Seems to be some sort of driver issue.
BIOS on the baord is at 1.6 Seems to be current.
I have UNINSTALLED the video drive rin safe mode and my video has returned.
I am now downloading the driver provided on the MSI website to try vs using the one at nVIDIA.

Black screen right after Windows Logo screen

All of a sudden the computer just powered down. Then I keep trying to boot it back up but it just gets to a black screen and does nothing. I managed to get to Safe Mode like twice, but then when I try to get to safe mode again it gets stuck loading it. What else can I do to save my laptop OR at least save my data?

Hello
It will be interesting to know which notebook model you have. I have had similar problem and I have connected HDD to second notebook as external HDD. on this way I was able to copy all important data.

No signal on the monitor after uopdating BIOS

1. HP Pavilion h8-1010, QN556AAR, 2MF116082M
2.Window 7 64-Bit
Hi,
I tried to update the latest BIOS for my computer and downloaded the latest BIOs version (2102 Feb version). I am sure the version I found is what I needed for my computer. I updated successfully according to suggestion from computer. After the computer suggest me to restart the compter, this when the problem occur. There is no signal to monitor after the computer started and it seems that there is no keyboard and mouse checking also during the starting process. I believe all collections are ok and monitor is no problem also. I have got a black screen and the monitor suggest that no signal detected from both VGR and DIV.
I am not sure if someone can give advice on this problem?
Thank you so much and I lok forward to hearing from you.

I would say you need to clear your CMOS settings using the jumper on the motherboard. And if that doesn't help, you may have corrupted the BIOS... possibly making your computer a doorstop.
Frank
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

No signal on monitor after Windows 8 logo

Similar Messages

Maybe you are looking for