No signal on msi 670 gtx power edition

hi just recently built a new pc,
i,m 98% everything is connected as it should be
my problem is when i switch on, all fans work, graphics card fans work, cpu fan etc
however i get no signal on my monitor, i dont hear any beeps at all just all fans spinning
just to add ive used JPWR1 for the HDD , POWER switch, and reset switch are plugged in on JPWR1 there are nothing on the  JPWR2 (is that right) ?
ive tried just using motherboard dvi only without graphics card connected,
ive tried just about everything i can think of
abviously i cant get into bios to update bios,
am i missing anything to try? it says in the user guide the HDD should be + and - and the  reset swtich should be - and + so abviously the lettering is facing up on the HDD and on reset is the opposite way if you get me, (power connectors to motherboad
could this be a cause why i,m getting no signal, or is it something more ?
ive tried using hdmi on my tv, i,m currently using dvi on my monitor to pc, (just wanted to try hdmi, to see if it would make any diffrence, but still get no signal
dont get why all fans are sinnning on everything n get no signal, if it was motherboard i guess fans wouldnt be spinning?
any advice would be helpful
motherboard- MSI Z87 G43
Graphics      - MSI 670 GTX PE
memory       - 8gb corsair
HARD DRIVE - 2TB seagate
PSU              - Corsair 600m
CPU              - I5 4570

Quote from: nittyg on 14-August-13, 03:27:03
hi ive tried all of the above apart from trying graphics in other pci slot,
my question is why doesnt it boot up using the onboard graphics? (670 gtx is removed when using onboard graphics) i,m thinking its a motherboard fault, as it should have no issue using onboard graphics? or am i wrong, i will try the other pci slot to rule it out but to be honest if i cant get a signal using onboard i cant see my graphics working on other slot.
but its worth a try before RMA
Yep, my on-board graphics worked fine even with the 670 installed.  The on-board graphics were set to 'only if no external gpu detected'  so my 670 even though booting up, fan spinning and no error beeps was not getting detected.   Very strange.
I also tried the 670 in another computer with a x16 socket and it worked.
I have ordered a new MSI Z77 G45 MB in the hope that it will work in a board of the same make as my 670.

Similar Messages

  • MSI N560GTX-Ti Power Edition Bios

    Can someone pls tell where can i download bios for this graphic card coz on MSI web site i cant find it anywhere. Maybe there is some bios that is compatible with that card but i dont know witch one coz i am afraid not to mess up the graphic card.
    Can some1 help pls.
    Sry for bad english.

    Well i removed the 301.42 with driver sweeper now, and instaled the 285.62. Ill try that one now.
    Well there are a lot of cards on the web that are faulty than, coz there is a lot of ppl with the same problem like mine and they cant find any solution. I saw few of them wrote that they did a bios flash and problem solved.
    Last VGA was Gigabyte N8800GTS 512, with this card i was not able to play BF 3, after that card got damaged i borrowed friend of mine his Gigabyte 460 GTX and BF 3 worked like a charm. Few days ago i bought MSI N560GTX-Ti Twin Frozr III Power Edition i did play for 2 days and it just started to minimize and lock so every time i had to kill it in task manager.
    Maybe i should buy a stronger PSU i dont know what to do anymore. :(

  • MSI Cyclone R6850 Power Edition - Freezing and Driver recovery problem

    I've just built a new Gaming PC and am having stability issues along with lower than average benchmarking results.
    Randomly, the screen will freeze, sometimes go black then re-appear and an error message from the system tray will appear “display driver stopped responding & has recovered”. The system will then operate as normal until the next freeze.
    I have tried all versions of the 64 bit drivers available from the MSI website, with no change in the issue. 3DMark11 benchmarking results are several hundred points below average, the same with Furmark, as the below results show;
    My system is running at stock, out the box speeds, with no overclocking on my part. The components are listed below;
    Cooler Master Elite 430 Case
    Cooler Master Silent Pro Gold 600W Modular Power Supply
    GigaByte GA-P67A-UD4 (Version B3) Mobo
    Intel Core i5 2500K unlocked
    4GB 2x2GB Corsair CMX4GX3M2B1600C9 Memory
    Coolermaster HYPER 212 PLUS COOLER
    MS Win 7 Home Prem 64bit OEM
    I'm happy to run any diagnostic/benchmarking software to help identify the issue.

    Thanks for the quick reply,
    Unfortunately, I dont have access to another system that would be able to power the card.
    I've already booked an RMA with the vendor, but am worried that they will reply with "sorry, the issue is with configuration/software" and be landed with the shipping expenses. The vendor is www.scan.co.uk
    *Edit - My 3DMark11 results are here; http://3dmark.com/3dm11/1782968?show_ads=true&page=%2F3dm11%2F1782968%3Fkey%3DfQqKAymffEKfDRbLEK3kQcYaCA7efu

  • MOVED: Can't overclock MSI 660 TI power edition

    This topic has been moved to Overclocking, Undervolting.
    https://forum-en.msi.com/index.php?topic=167176.0

    Quote from: hurricane28
    I know that no card is the same that's not the issue and like i said this card is a great card.
    But can you tell me than why is it that when i looked at reviews they get 150+ on the clock and mem +600 when people who bought this card only manage to get in between +20 to +50? they did not use the aux voltage.
    Quote from: flobelix on 10-March-13, 21:40:22
    Overclocking is a matter of the individual sample. Some cards of the same model might clock great while others won't.
    Quote from: hurricane28
    I heard that the first cards would be able to put more volts but the later cards having volt locks because its high potential?
    If so could i get the older bios versions of that card or get another bios on my card?
    It just don't seen fair that the first cards could overclock way better than the latest cards.
    and it is not that some cards are better ans some are not because this is my second card i get because i was thinking it was broken because of my problems.
    Nvidia forced all card manufactures including MSI to remove GPU overvoltage above 1.175v. It has nothing to do with potential but Nvidia dictating to stop overvoltage. MSI is therefor not allowed to offer unlocked versions. Again overclocking is a matter of the individual sample and your 660ti PE is already higher clocked by default than most other manufacturer cards could do with manual oc. 

  • MSI 4G 970 GTX OC Edition - Bios Update Request

    Good morning. Since NVidia isnt doing much to rectify their issues I thought I would seek out some help on the MSI Gaming pages to see if I could update the bios to my card and it may relieve some of the GPU card usage issues. So rather then tag on someone elses thread I am asking for assistance to ensure I use the right BIOS updates and instructions so I do not damage my card. Any help is appreciated. Thanks.
    My symptoms from my card are pretty standard like the rest of the 970 GTX series owners. Some freezing or screen stutter occasionally, and low usage of the components.
    In addition one of my older games is unable to use the 4G of VRAM properly and the screen locks up and the game crashes. That game is about 12 years old now so I am not to concerned if this issue isnt resolved.
    My info:
    Card Serial #: 602-V316-10SB1411120807
    Model: MSI 970 GTX OC Edition
    FX 8350 w/H60 Liquid Cooler
    ASUS Crosshair V Formula Z Mobo
    32 GB G. Skill RipJaw @ 1866
    Thermaltake 750W Modular PSU
    MSI 970 GTX OC Ed.

    What does .193 do for  me? Does that address the VRAM issues or the Low GPU usage issues present in the 970 chipset?
    I just pulled the 970 from my rig for now. When NVIDIA makes some statements and then MSI on what if anything can be done I might put it back in. At this time though I feel like I need to just wait it out. The card causes me problems with a 12 year old game when i dont cap the memory usage. That shouldnt be happening, when on my 7870 which only has 2 GB of memory has none of the same issues on the exact same game.

  • PC suddenly restarts while playing games MSI 660Ti Power Edition OC 2GB

    Hi,
    I have the following problem since I replaced my graphics card (before 9800GTX+, now MSI 660Ti Power Edition 2GB) I got 3 random restarts while playing games. The computer is not overheating, the CPU's temperature is around 58-59 degrees after running prime95 for 3 hours. The graphics card temperature is 70 degrees after running furmark for 1 hour, the stress tests never failed, just when running games. The computer has been stable. For case cooling im using (2X12cm front, rear 1X14cm below 1X12cm and above 1X12cm +1 X14cm).
    I got two random system restarts while playing Doom 3 BFG and one system restart after playing Wolfenstein for 4 hours. The PC just restarts itself.
    What could be wrong? I have no more ideas? Should I replace the CPU cooler (im running the stock CPU cooler but all stress tests dont show overheating?!)
    Is it possible that the PSU is the reason, but it should be strong enough ...
    The system:
    GA 870A-UD3
    AMD Phenom II 1090T (cooler box)
    MSI GeForce 660Ti Power Edition OC 2GB
    12GB RAM (12GB Kit 3X4GB DDR3 Kingston Genesis 1600)
    Samsung 256GB 840pro
    WD Blue 500GB
    Thermaltake Thoughpower Q-Fan 750W PSU
    Housing NZXT Source 210 Elite
    OS: Windows 7 Ultimate 64-bit
    Thank you.

    The temps for the graphics card are quite normal. I have the same one and under load it will go to 70 to 75C, depending on ambient. What Nvidia driver are you using? Did you do a new driver installation?
    If I look at your CPU though, then you are very close to the max CPU temp and throttling may invoke the shutdown    http://products.amd.com/en-us/DesktopCPUDetail.aspx?id=640&f1=&f2=&f3=&f4=&f5=&f6=&f7=&f8=&f9=&f10=&f11=&f12=
    62C is max.
    Could also be your PSU that's not completely stable and continuous power draw may cause Overcurrent or overtemp protection. Speculating here as to probable causes.
    Another possibility is your RAM. That should normally be paired in 2's. Have you tested with only 2 modules ? Remember we don't support that MB here, but its just another test I would run. But you would know, probably having run it like that with the previous GPU.

  • 20A 12v enough for R7850 Power Edition?

    Hi,
    I recently purchased an MSI R7850 2GB Power Edition.
    It's already installed, and I'm running Borderlands 2 very well. However, my PSU has only 20A on a single +12v rail. Is this enough?
    When I ran BF3, I got white "snow" dots everywhere on the screen, but I'm not sure if this is related...
    Thanks for the help.
    System:
    h61 Mobo
    i5 3470
    2x4gb G-Skill Ram
    7200rpm SATA 2 HDD
    DVD/RW
    MSI R7850 2GB Power Edition

    Quote from: danspy on 03-December-12, 20:58:51
    Which driver do you use?
    I ask because of the 12.10 driver does not run properly with the 7800 cards, but the 12.11 beta does
    http://www.msi-forum.de/index.php?page=Thread&threadID=103009
    sorry it is German but you can see the photos.
    Thanks for the reply! I tried the 12.11 drivers last night, and the issue is still there.
    Here is a screenshot of my machine playing Witcher 2: http://postimage.org/image/6ew87dn85/full/ - If you look at the helmet on the right side, you can see a lot of dots. You can also see them on the character's clothes, and in the top-right corner (they look like circular outlines in this section)Pretty much everywhere! If I play on LOW setting, the dots are less strong, but still there.
    Here is BF3: http://postimage.org/image/3kbhepavp/full/ - As you can see, the issue is pretty terrible on this game! It makes no difference what settings the game is on.
    To summarize:
    Not the PSU (brand new Corsair)
    Not RAM Timings
    Not the Catalyst Drivers or Mobo BIOs
    Not overheating
    Not the MOBO/CPU (brand new)
    Thanks for the help so far, but any other ideas? I have a feeling this brand new card is faulty.

  • 660 Ti Power Edition OC need uefi bios

    Just recently upgraded to new MSI 660 Ti Power Edition OC and I need to install windows 8 could I please get the new UEFI bios for this card ty

    Svet this is the motherboard that this will be installed in:MSI 990FXA-GD80V2.I have read that bios version 16 is not working for this motherboard can you get me bios revision 17 as UEFI.Or is this bios you sent working with this motherboard?

  • GOP/UEFI VBIOS Request for 660 Ti Power Edition OC

    Hey,
    I recently bought a MSI GTX660 Ti Power Edition OC. However, I need the UEFI VBIOS to make secure boot work.
    Here is the relevant data:
    S/N: 602-V284-050B1211163749
    Current BIOS: https:// www. dropbox.com/s/309f37r1l7satfz/GK104.rom
    NVFlash output: https:// www. dropbox.com/s/4n8qnsijya72ria/nvflash_output.txt
    Hint: Remove the whitespaces in the URLs as I don't seem to be allowed to post external links.
    I hope you can hint me at a version I can use. Thanks. 

    Thanks for the fast response

  • GTX 670 Power Edition gives no video signal

    Hoping somebody can help here. I've had a long string of problems which seemed graphics card related. Initially, the problem that Windows would reboot with no error message or warning of any kind about a minute after logging in. No problems in safe mode nor any problem if I set Windows to start in Diagnostic Mode. Advice at the time suggested doing a system repair from my installation CD but didn't have time to do this before going on holiday. On return, the problem had deteriorated (or a new problem appeared) - there was no video signal, not even the BIOS screen.
    At this time my graphics card was an NVidia GTX 580, motherboard a Gigabyte GA-X58A-UD3R, I-7 950 CPU, 850W XFX PSU.
    I ran through a host of tests to eliminate possible causes:
    1. Tried the card in all PCI_E slots but still no video.
    2. Tried another card (NVidia Quadro) in all PCI-E slots, system booted successfully with video and could login to Windows (difference here is the Quadro is powered directly from the motherboard).
    3. Tried a number of DVI cables with both cards, the Quadro worked with all of them the 570 stubbornly refused to give a video signal.
    Decided the problem was either the PSU or the GTX 580. Returned the latter under warranty and purchased the MSI GTX 570 PE. Installed this and again no video signal but ran through the above tests again with exactly the same results. However could now test the 570 on another system (could not try this with the 680 as PSU on my other system only had 2 6-pin PCI-E connections and the 580 required an 8-pin and a 6-pin power connection). The 570 at least produced the BIOS screen, booted Linux and presented a login screen. Didn't login as the PSU on this system was probably on the marginal side for wattage.
    Decided then that I had a strange PSU problem. It could power my PC with the Quadro, suggesting motherboard, CPU, RAM and disks were all OK but could not provide sufficient power for either the 580 or the 670 cards. Bought a new 850W PSU and have just installed this with the 670 card in and yet again I get no video signal. I am now stumped as to what the problem can be so would welcome any suggestions as to what may be wrong and/or what else I can try.
    Thanks,
    George

    Quote from: Svet on 16-November-12, 06:48:32
    then you should contact mainboard vendor about it as problem is not in the VGA.
    I had given what I thought was sufficient information about the PC spec in my first post. Both what I started with and what I'd changed. But I'll give the full spec here:
    Motherboard: GA-X58A-UD3R Rev 2.0
    CPU: Intel I-7 950 3.06 GHz
    Memory: 3x4GB Crucial DDR3 PC3-10600 • CL=9 • Unbuffered • NON-ECC • DDR3-1333 • 1.5V • 512Meg x 64
    Disks: Samsung 64GB SSD SATA System disk
              WD 1TB and 500GB SATA drives
    PSU: Coolermaster RS-850-SPHA-D3 80+ Gold - 3.3V:22A, 5V:25A, 12V:70A single 12V rail
    GPU: MSI GTX 670 2GB OC Power Edition
    OS: Windows 7 Professional 64-bit
    The changes were the PSU and the GPU. The problem started when I had an XFX Black Edition 80+ Bronze PSU and a Gigabyte GTX 580 GPU otherwise the rest of the spec was and has remained the same. With my original spec, it ran perfectly happily for almost 2 years but then started with the system rebooting without warning about a minute after login (it would stay at the login screen indefinitely). After running some tests the clues seemed to point to the GPU configuration having been corrupted in some way (from sfc logs). However, if I set Windows to Selective startup, I could login and the system would stay up. I decided to do a system repair from my Windows 7 installation disk but had to postpone this for a couple of weeks during which time the PC was powered off.
    When I next powered up the system, there was no video signal at any time. The investigation I did made me think either the GPU was faulty or there was a PSU problem - all other aspects of the system could be shown to work. I returned the GTX580 as it was under warranty and purchased the GTX670 with the refund. This exhibited the same symptoms as the 580 - no video signal no matter how long I left the system running. I was able to test the 670 in another system and it worked there. I couldn't run this test with the 680 as the PSU did not have an 8-pin PCI-E connector - just 2 6-pin connectors.
    I then added an NVidia Quadro card alongside the 670 and booted the system with this as the display GPU. This gave me a video signal at all times and more importantly allowed me to get into Windows and check if it recognised the 670 in Device manager. It did but reported a problem as, until now, I hadn't been able to load the 670 driver. I did this and rebooted - again no video signal during post and initial Windows boot but I did get video as soon as the newly installed driver was loaded. This is the state I'm in now other than I've flashed the vbios as suggested and the GPU no longer works on my other PC.
    Note, I can happily remove the Quadro and boot the system with just the 670, except I don't get any video signal until Windows has loaded the 670 driver - the monitor light stays stubbornly orange till that point. After that, everything seems to be fine - I don't get the reboots that this problem started with. The only other clue I have is with my original spec I always had a problem from shortly after building it where I would need to power cycle the system most times as I could not wake it from hibernate mode.
    I'm hoping this helps as I know I have run out of ideas of things to do. The only thing I have left to try is update the motherboard BIOS.
    George

  • MSI GTX 670 Power Edition/OC max temperature?

    I've had a MSI GTX 670 Power Edition/OC working great since October 2012, no problems even with the most demanding games.
    But now the summer heat has come (it's 40°C in the shade) and I've been getting crashes (classic TDR, no video signal, windows reboots) when the temperature of the GPU gets to about 80°C. If I leave the case open, it never reaches that temperature and works great.
    I can't find the temperature specs for this card, but the reference GTX 670 should run up to 97°C.
    Is this normal? What is your maximum stable temperature?
    P.S. I don't overclock, anything.
    Thank you

    Hi there,
    the only think I could suggest is that ...
    1st. do you have adequate cooling in your system..i.e. case fans etc,etc, and to ensure theres no obstruction to cooling fan on  vga card, always an alternative is to install what they call an exhaust blower fan place that directly underneath your card  and that will extract heat away, I had the same issue with my MSI 6570 card and as soon as I added an exhaust blower mine runs at 33oC and i'm pushing my card to the extreme and temp still stays the same... if that fail then your gpu cooling issnt running fast enough to supply adequate cool air...
    I hope that will help you

  • MOVED: Display driver stopped responding and has recovered. MSI GTX 670 Power Edition

    This topic has been moved to Graphics Cards.
    https://forum-en.msi.com/index.php?topic=251843.0

    Hey there,
    Noticed that my BIOS drivers were outdated so i updated them (Z68A-GD65 G3, version: 25.8), after all the reboots i logged on my computer, started teamspeak, and while searching for the teamspeak room the driver problem happened again.
    Anyway, my power supply is NOX Hummer 80 600W, model: HUM80600.
    The problems started on September of this year i think? I've had this computer for almost 3 years now. I have the latest Nvidia drivers, and this still happens, i've tried downgrading, fresh installing, and nothing worked.
    Graphics card: MSI GTX 670 Power Edition 2GB GDDR5 PCI-E 3.0 DirectX11, S/N: 602-V284-02SB1207063830.
    I'll try it tommorow if possible.
    Thank you for the attention.

  • GTX 670 Power Edition OC versions ?

    Hello.
    Today I've got a question about the MSI GTX 670 Power Edition OC graphics card.
    I'm about to buy this card but I've found that there are two version of it: MSI GTX 670 PE/OC and MSI GTX 670 PE/OC G ( notice a "G" at the end ).
    The question is, what that "G" in the model name means, what are the differences ?
    Greetz, `NX.

    Quote from: `NX on 10-February-13, 23:06:14
    I mean, I was wondering if going with Radeon 7970 wouldn't be a better idea
    But I'm not sure of Radeons.
    depends on your plans to use the card for! some games like Far Cry 3, Hitman Absolution, Sleeping Dogs, Medal of Honor Warfighter , dragon age and some more respond better to AMD cards while alot of others are more geared towards Nvidia ones!
    so what do you plan to do with your graphics card? generally Nvidia ones are better all round but it depends on what your doing with them to which way is better!

  • [REQUEST]*URGENT* GOP / UEFI vbios for GTX 670 Power Edition

    I'm stuck trying to setup a new system :(
    I'm looking for GOP / UEFI vbios for: MSI Ge Force GTX 670 Twin Frozr IV OC Power Edition.
    Here is my serial number: 602-V284-02SB1207062541
    Thank you for helping a noob out in advance.

    It is attached.
    Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
    Then flash the desired file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
    To do so rename the desired file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
    Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash.

  • MSI GTX 570 Twin Frozr III POWER Edition OC - Dual monitors IDLE higher temp

    I have MSI GTX 570 Twin Frozr III POWER Edition OC, when I attached second monitor to this card temperature in IDLE mode on this card goes higher from ~38C with one monitor to around ~45-6C with second.
    Card with attached two monitors do not goes in 2D mode, I readed its a nvidia bug and I should upgdate my BIOS.
    In desktop IDLE mode card with attached one monitor
    http://img401.imageshack.us/img401/3726/19936167.gif
    In desktop IDLE mode card with attached two monitors
    http://img851.imageshack.us/img851/1857/27227099.gif
    My BIOS version 70.10.27.00.01
    Is it available any newer bios for this card ?

    Quote from: PeterMac on 10-May-12, 01:13:08
    From 50MHz on GPU at idle desktop with single monitor to 770MHz!! with two monitors  for what ?
    to support the second monitor it seems.
    read the link
    http://nvidia.custhelp.com/app/answers/detail/a_id/2483

Maybe you are looking for

  • IIS 6.0 Policyagent not working with AM loadbalancer

    Trying to enable SSO for IIS 6.0 website running on port 80 with Access manager 7.0. AM loadbalancer URL is configured on OracleAS webcache. Everything works fine when policyagent is configured with one of the AM servers instead of load balancer URL.

  • Why does my iPhoto app not open after upgrading to 10.8.2?

    I keep getting a popup that says the application is busy or the files are unreadable. When I hold down the option and command keys while opening, I get a popup that asks me to check what I want to repair, but when I check on one, the other popup appe

  • Permission problem - CTN - FL

    Hi, We have an module we have developed using the SDK.  The module displays some standard SAP information, namely: AR Invoices,  AP Invoices, Business Partner name and payment terms I have one user who cannot access this screen, she gets a mess: CTN-

  • Is everybody having problems with Canoscan drivers-can anyone help, please?

    After starting with Leopard, my LIDE25 refuses to work, and the window from the toolbox tells me a driver cannot be found, even after redownloading the driver, which, according to the Canon website, is perfectly compatible with the LIDE25 driver. Som

  • ESS - delegated from employee - hr administrator - employee manager

    Hi Guys, we are working on customizing of ESS and MSS on Portal. We have ECC 6.0, Portal 7.0 SP14 e BP ESS 1.0 SP12 and  BP MSS 1.0. I have one question for y. One employee that use ESS funcionality can "delegate" somebody for insert (in case of his