No signal on VGA Monitor

I just bought one of the new minis last night. This is my first time in the Mac world so I'm expecting to get thrown some but I'm having a monitor problem right off the bat.
I am using the mini-display to VGA adapter and get no signal on the monitor. The monitor works fine with my PC. I also tried a second monitor but get the same no signal. If I use my HDTV via HDMI I get a display fine on the TV. I went to display and tried using detect displays but nothing changes. If I change resolutions it changes on the HDTV but I never get a signal on the monitor.
Any tips to try? Are the VGA adapters known to be problematic? Maybe defective?

Hi
i did what you said and tried with other resolution/refresh rate combinations, also with anoter external monitor (and vga cable) but its still the same: monitor is detected but there's no signal.
Now I will try to chek if the adapter works on other pc and monitor.
Thanks
(anyway it was the firs time i connect this mac to an external monitor)

Similar Messages

No signal to VGA monitor using Mac mini display to VGA adaptor and first time boot Mac mini

Just unpacked Mac mini and powered up using Mac mini to VGA display adaptor and VGA monitor. There is no signal to the monitor ( power is on).
How to see the display?

[ 13.093] (==) No Layout section. Using the first Screen section.
[ 13.093] (==) No screen section available. Using defaults.
[ 13.093] (**) |-->Screen "Default Screen Section" (0)
[ 13.093] (**) | |-->Monitor "<default monitor>"
[ 13.093] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
First step would be to create the necessary entries (easier to make a complete xorg.conf versus xorg.conf.d/##-whatever.conf).
All Desktop Environments / Window Managers rely on X. Man pages are helpful, possibly some headaches ahead as I fought a dual-monitor display this way.
I currently run a xrandr script to switch displays on my hp pavilion: https://wiki.archlinux.org/index.php/Xrandr#Scripts
Check it out.

"No Signal Input" on external VGA monitor

About a year ago my 4 yr emac that I gave my dad starting having the video on the built in display go out periodically. When it started happening more and more, rather than get a whole new computer, we purchased a 22 widescreen VGA monitor and hooked it up via a mini-DVI to VGA adapter. Everything was great and worked perfect. Just last week all of a sudden the VGA monitor is displaying "No Signal Input" The emac is starting up and making all of the correct sounds, but no picture at all.
I've tried booting from a disk and that was unsuccessful. I've connected the monitor to a different computer (old Dell laptop) and the monitor displayed fine.
What are the odds that the Mini-DVI to VGA adapter just went bad?
The next thing I was going to try was to reset the Parameter RAM.
Any other suggestions?
My monitor also has a DVI input. Should I try connecting to it instead? (although I'll have to buy a new adapter for DVI).
THANKS

Hey Kat,
What are the odds that the Mini-DVI to VGA adapter just went bad?
That could happen. If you jiggle the plug you might get it to come back. I just had that problem on an iMac G4.
Richard

How to get two vga monitors on a mac mini 2012

Hi Guys,
please forgive any ignorance that follows. I am a new convert from a PC and have bought a Mac Mini 2012. I want to be able to use a monitor that I can see my music programme but run a second monitor that will allow me to display visuals from a VJ programme. Here is my journey.
I bought the mac mini and the thunderbolt to vga adapter. Generic VGA monitor - worked a treat. I then wanted to run a second generic vga monitor form the hdmi port. After a lot research I chose an adapter for £15 that one of the reviews said worked perfectly for a mac mini and VGA. Bought it form Amazon. Didn't work - no signal etc - refund. Then I thought I would buy a monitor / DVD with a HDMI cable and do hdmi to hdmi and use that as the music monitor and use the thunderbolt port for the projector and VJ programme. Bought one from Asda. Plugged in great picture etc worked a treat but got a ground hum from new HDMI monitor. More research and realised that ground hum was a nightmare. HDMI monitor back and refund.
It is doing my head in.
I will be a happier man if someone could say that they have a mac mini 2012 and they bought this HDMI VGA converter and use a generic vga monitor and it works a treat. There is only so much stuff I can return before my lick runs out.
I don't think I'm asking for much.
Any help would be gratefully received.
Cheers Pete

Sorry, but I can not safely suggest a digital HDMI to analog VGA converter or if any would even work with the Mac Mini because I do not have and have not personally tested any.
I can only suggest that instead of dropping more money into adapters or an HDMI to VGA converter, that perhaps' you should consider replacing one if not both with a more modern digital monitor that support either HDMI and/or DVI.

Can I use a Mac mini with a VGA monitor?

The Mac mini web page lists an Apple Mini DisplayPort to VGA Adapter as an accessory, but the Mac mini doesn't appear to have a Mini DisplayPort.
The Mac mini also has an HDMI to DVI Adapter included, but would this allow a VGA monitor to be connected via an additional DVI to VGA cable? ie. can the HDMI port provide an analogue signal that a VGA monitor can receive?

Some Mac Minis do have mini-DisplayPorts. In these two it is between the HDMI and the USB ports:
(yes Thunderbolt should accept mini-Displayport).
In this one it is between the Mini-DVI and the USB ports:
Only the oldest Intel models would you need a different adapter to VGA
Those you would need a DVI to VGA adapter from Apple such as this one. Note, DVI to VGA is converting digital to analog, and not very useful, unless your TV has neither DVI nor HDMI. DVI is much better converted up to HDMI. And the audio would have to come in separately. So depending on your display model and make, you may be asking for the wrong adapter. VGA is fine if all you are going to do is view DVDs on an old TV. But if you want the ability to use the Dock, menubar, etc..., it is good to have a 1080p TV with built-in HDMI or better.

Can I use the Apple ADC to DVI adapter with a VGA monitor?

Hey everybody,
I have a quick question. I work on computers fr friends and family as a hobby. I have an ADC monitor and need ot be able to hook up computers with a VGA port on them to it. Can I use the Apple ADC to DVI adapter along with an Apple DVI to VGA adapter to successfully connect VGA computers to my ADC display? I was assuming this would work and ordered both adapters but now I have made myself nervous about weather or not this will actually work. Has anybody out there successfully done this? Thanks for your help in advance everybody.

You can't run an ADC display with a VGA computer without a converter. Adapters won't do it.
a VGA to ADC converter will drive the ADC display directly
<http://www.gefen.com/kvm/product.jsp?prod_id=1301>
If you have the Apple DVI to ADC adapter
<http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=18 72D402&nplm=M8661LL/B>
you could use it with a VGA to DVI converter
<http://www.gefen.com/kvm/product.jsp?prod_id=1310>
It might be cheaper to get DVI graphics boards for the computers and use the Apple DVI to ADC adapter.
<http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=18 72D402&nplm=M8661LL/B>
Your title says "Can I use the Apple ADC to DVI adapter with a VGA monitor?". If you want to connect a VGA monitor to a computer's ADC port you need the ADC to VGA adapter
<http://www.gefen.com/kvm/product.jsp?prod_id=1299> You can't use an ADC to DVI adapter followed by a DVI to VGA adapter, because the ADC to DVI adapter doesn't pass the analog video signals needed for VGA.

Two VGA monitors don't work with two different G4s, but both work with G3!

I recently acquired two used Power Mac G4s (one of them is a mirrored-door dual-processor that I got from school and was told should work, the other is a Gigabit Ethernet model, and should also work), from two completely different sources. They both turn on (I get a power-on light, I hear HDDs churning, and I get a power chime from one of them, and they react to the usual Mac stimuli, mouse and keyboard light up, reset button works, etc.) but I get *absolutely no video*. The monitor syncs for a second, like it gets a quick signal, then goes immediately back to the "CHECK SIGNAL CABLE" message.
I have tried them both with two generic PC VGA monitors (though they were both kind of old and crummy ones, they work on my G3 and other computers. I've tried the working PCI video card from my G3, that doesn't work, nor does swapping their video cards. They both have Apple-supplied ATI AGP video cards, both with Apple's proprietary ADC interface, though one has only DVI out (with a DVI to VGA adapter that came with it) and the other has a straight VGA port.
The weird thing is that, even though these computers have never, er, met before, they have the exact same problem. The only thing these things have in common is the monitor I'm using. This leads me to believe
The only thing left I can think of is to hook them straight from the DVI port to my HDTV, but I don't have a DVI cable, much less know ANYTHING about DVI. Could it be that these particular VGA monitors don't like AGP video cards, or some sort of weird incompatibility that isn't well known?
I figure if anyone's seen something like this, you guys have. Here are the AppleHistory entries on these machines, if it helps:
http://apple-history.com/body.php?page=gallery&model=g4giga&performa=off&sort=da te&order=ASC
http://apple-history.com/body.php?page=gallery&model=g4_mirror&performa=off&sort =date&order=ASC

The software on the hard drives may be set for a video setting that won't work with your monitor. A few things to try (in order):
1) Reset PRAM. Hold down Cmd-Option-P-R when booting until you hear the third Boing.
2) Hold down Option when booting. Should show symbol of hard drive, plus a couple of arrows.
3) Boot from a CD (Install disk or, preferably, Hardware Test Disk).
4) Safe boot. Hold down "S" just after the boing. Release it when (if?) you see the turning gear.
If it is a scan rate problem, one of these should show some video.

Mac mini late 2012 not working with small VGA monitor

I got a mac mini (late 2012 10.8.4 all updates installed) and it is working fine with samsung b2230 via VGA adapter. There is a small VGA monitor (PL8006 max at 1024*768) which works fine when connected to a PC.
When I connect the small VGA monitor to mac mini it is not displaying anything (monitor shows blue screen with letters VGA so I assue it is not getting any signal). Mac's resolution is set to 1024*768 with 60Hz (even tried with 800*600 without any success). Monitor is also not working with win 7 installed in mac mini using bootcamp.
Any thoughts?

i just found that when the VGA cable of the small monitor is slightly inserted into the VGA adaptor it works fine (this is not usable because there is no way to keep the pins at that level) and when the pins inserted fully / moved little it is not working. Since this happens only between these two devices can't find which one is faulty.

MacMini to VGA monitor via MiniDP- VGA converter.

Hi everyone,
I want to connect Mac Mini to the old VGA monitor. I'm using converter from MiniDP to VGA. When computer starts i see the startup screen on the monitor but then it disappears and no signal message comes. After that when i connect a HDMI TV to mac mini it shows. So i guess that the mac mini switches video output from MDP to HDMI soon after startup. How could i solve the problem?

SOLVED - I purchased a third-party MiniDP to DVI adapter instead and it works a treat.
Quite what the difference can be to a supposedly passive adapter I'm unsure - but glad it's fixed anyhow.

What cables to connect to the VGA monitor

Hello,
From what I know the Mini Mac 2010 includes a HDMI to DVI monitor adapter. I have a LCD display with a VGA port. How do I use this adapter to connect it to the monitor VGA port. I am thinking about connecting HDMI --> DVI adapter (included)to DVI ---> VGA adapter (purchase) to my monitor. Will it work?
Also, how do I know if the Mini Mac is 2010 or early version before I buy it?
Thanks.

Using the stack of adapters you suggest will definitely not work. The VGA monitor is not a digital signal, where the HDMI is. DVI specs support both analog and digital signals, but when using a DVI to HDMI cable it should have the digital only version of the DVI connector. Even if you can find adapters to fit, you can not go between HDMI and VGA without a digital to analog conversion device in the middle.
Your only practical option is the Mini DisplayPort to VGA adapter.
If you are asking how to tell a 2010 HDMI equipped mini from earlier models, its quite simple - the HDMI native models are all the unibody aluminum design. The earlier models without HDMI have the plastic top.

Concerning: VGA monitors using an Aluminum Powerbook G4 PowerPC 2004 15"-screen 1.5Ghz The DVI (converted to VGA) video output stopped working on this computer after 9 years of service. This raises question 1: Is there any way of fixing this? I've tried

Concerning: VGA monitors using an Aluminum Powerbook G4 PowerPC 2004 15"-screen 1.5Ghz
The DVI (converted to VGA) video output stopped working on this computer after 9 years of service. This raises question 1:
Is there any way of fixing this? I've tried the usual: triple checked all vga cables & devices through trial & error. Bought a new DVI-VGA adapter. Reset PRAM, PMU, etc. Nothing works. Something is probably damaged, because my KVM switch was not working unless I hot-reseated the vga cable into it, leading to this DVI port, and that is pretty rough stuff.
Question 2 (related):
This dovetails into this: Can I drive a VGA monitor with the s-video output port on this computer. It would take an s-video (male)-to-15-pin-VGA adapter. Has anyone does this? So far, I haven't even found the adapter mentioned anywhere.
Thanks for reading this.
el7

Thanks for the useful feedback, Knucklesmac. I agree. I must have blown something on the logic board -- because I had a faulty old KVM switch that would not switch between computers without some nasty hot-plugging/unplugging the VGA video cables. (wince!). It's like when Dizzy Dean ruined his arm because a line drive hit him in the foot and he readjusted his mechanics around the injury. I take the blame because this has been a great computer, and does not deserve any blame.
If it will help anyone else reading this thread, C2G (née Cables to Go) has some interesting ideas for still getting external video out of this computer:
-USB-to-VGA
http://www.cablestogo.com/product/30545
-Convert s-video or composite video signals to high resolution VGA
http://www.cablestogo.com/product/40971
The price range is $75-$85, which doesn't make horse sense to me for such an old computer -- which has a lot of life in it anyway, because its own 15" monitor is not chopped liver.
el7

VGA monitor and TV switchbox with Mini

I have recently purchased the EyeTV for DTT box for my Mac Mini. I currently use a Dell VGA monitor for my work but would like to watch TV broadcasts from the EyeTV through my TV. However, I don't want to keep unplugging the monitor and then plugging in the TV (via the DVI - S-video adaptor) each time I want to view EyeTV stuff. Is there some kind of switchbox available which would enable me to have both the monitor and TV connected and where I could just flick a switch to send the video signal to either the monitor or TV (note: I don't need the video signal to be displayed on both the monitor and TV at the same time).
Thanks in anticipation.

Sorry I misread your post.
One option would be an eyeHome which would connect to the ethernet port of the Mac mini.
Another option is a VGA Splitter.

Connecting RGB/VGA monitor to ADC connector on G4

I've got a G4 that has a Nvidia GeForce2 MX video card with an ADC and RGB/VGA connectors on it.
The RGB/VGA connection is completely broken. I have hooked up 5 monitors to it and they are all awful looking with color problems and major banding all over the screen.
the ADC port is fine. but I am giving this to a friend who only has an RGB screen, not an apple display.
Does anyone know of an inexpensive adaptor that will allow me to hook up an RGB/VGA monitor to the apple ADC connector on the video card of this G4?
Thank you

The adapter just takes the analog video signals from pins on the ADC plug and connects the to pins on the VGA socket. It doesn't do any electronic conversion. Since the board is only designed to run one display at a time, it is unlikely they use two digital to analog converter chips. They probably run the output from one converter to both connectors on the board. If the analog is bad on the VGA connector, it probably will be bad from the ADC. You may be lucky, but with the current prices of ADC to VGA adapters, I wanted to warn you that it may not work.

External VGA monitors are not working only with my Macbook Pro 2012mid version

Hi all,
I have a macbook pro 13' 2012mid version, running the latest version of Mavericks, 10.9.2. If I connect my macbook to any extrernal VGA monitor (I have tried 4 different monitors), then the external display is detected in system preferences, but the monitor is showing only black screen (no signal). I am 100% sure, that my minidisplay port, the cable and the monitors are working properly, cause if I boot the same macbook from bootcamp win7 partition, then external monitors are working well.
I have also tried the same miniDP VGA with an older macbook pro (I think it is a model from year 2011, but also running Mavericks 10.9.2) on the same displays and the monitors are working fine. So the problem must be with in my OS X.
A have also tried some things, that I found on the net, like booting with the plugged in monitors in safe mode, reseting pram, I tried different settings for the external monitor in the system preferences (resolution, refresh rate...) but nothing helped. External monitor stayed recognized in system preferences, but with black screen and no signal.

Your post is incredibly hard to read, font is way to small.
If you used Boot Camp Assistant to create a partition to install Windows to you need a REAL Windows 7 or 8 install media and license key and you have to actually install Windows on your Mac. Boot camp is only for creating a partition to install Windows and starting the Windows install from REAL Windows install media.
That Windows install media has to be a DVD disc, if your Mac has a built in DVD drive (Apple does not allow Windows to be install any other way on Mac computers that originally come with a built in DVD drive), or from a USB stick with the actual Windows install files on it (Not an ISO of the Windows install files).
So the question is did you install Windows on your Mac? It doesn't look like it from the Option key boot and the list of available Boot Devices you posted.

Satellite P50-B-103 - Connect my HDMI output to a VGA monitor

Hello everyone,
I have just bought a satellite *P50-B-103*, which only has a HDMI output and I would like to connect it to an external VGA monitor.
I thought I only need to buy a HDMI - VGA converter but the buyer said to me that Toshiba, unless this model, is not prepared to connect to a VGA monitor although I use a converter.
Is it true or I can connect my laptop to the vga monitor using the converter?
Thanks in advance,
Charly

The point is that HDMI provides digital signal and the VGA (RGB) port support analogue signal.
To be honest I read many articles about such adapters and converters but in many cases such converters are useless.
So its no matter if your notebook was manufactured by Toshiba or other manufacturer.
Itsa matter of the signal standard supported by each port.

No signal on VGA Monitor

Similar Messages

Maybe you are looking for