No signal received in Wave studio from turntable connected to SB External Line

I have a SB external (USB) with a turntable connected to line in. While the output (including wave studio) works fine into my preamp/amp and speakers, and while I get the turntable signal signal via the external's headphone jack, it does not appear/record in wave studio on my pc running xp. any suggestions?

complyguy wrote:
I have a SB external (USB) with a turntable connected to line in. While the output (including wave studio) works fine into my preamp/amp and speakers, and while I get the turntable signal signal via the external's headphone jack, it does not appear/record in wave studio on my pc running xp. any suggestions?
Actually I wasn't too sure what you wanted but have you try setting the mixer in the record windows to 'What U hear'.

Similar Messages

  • ABAP report  from fields connecting to an external database

    Hi All,
    The requirement is to connect some GL data with external audit data which is stored in an oracle database.  These two table data has to be merged and a report has to be generated.
    I heard we could connect to the external database from the R/3 4.7 version through DBconnect.  Has anyone come across any such requirement and done a similar report, could you give me the inputs please.
    regards
    Girish

    Questions like yours are best asked over at the webOS Developer's Forum.  The Palm Support Community here is geared to answering end-user questions about devices, not programming information.
    https://developer.palm.com/
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • LAN connection, PC, signal received to laptop but can't connect

    I am visiting my parents who have a LAN connnection and a PC running Windows XP. I brought my Airport extreme, (coned version) with me so that I would be able to use my laptop while here. When ever I connect the Airport (LAN box? into Airport, Airport into PC) both computers show a connection to the interent but fail to connect to the internet. I have also tried plugging the ethernet cable directly into my laptop and I have no luck there as well.
    I have tried to look through help on the pc and there is no help to be found.
    If anyone out there should know how I can fix this problem it sure would be great.
    thanks

    Is this a DSL connection or cable modem connection?
    If it is a cable modem connection you must power off the cable modem whenever you switch the Ethernet output from one device to another. This causes the cable modem to forget the device that it was talking to. The cable modem will then discover the new device and communicate with it.

  • Problems transferring music from turntable to computer with Audigy 2ZS Plse He

    I originally had Sound Blaster PC28. I have installed last year Audigy 2ZS with 6 analog plugs and updated regularly. Everything is fine from burning to playing music of any format allowed. However, last week I tried to transfer vinyl music to my computer using Sony Sound Forge Version 8 and nothing works. Here's what I did. Luxman Turntable connected with ground to LINE IN ( in DENON amp ) and in the AUX output I have 2 Monster cables boing to my computer twinned on goldplaited /8 jack which is connected to the second (from right) LINE IN in the sound card. This done while referring to Manual & Getting Started Demo Creative program in the software. NO SOUND AT ALL COMES IN the computer - while the music is playing qell on my audio system player. I've done all kind of adjustment with the Microsoft Volume Play & Recording Controls and with Creative Mixer.
    I can only distinguish on Sony Sound Forge two volume bars that there is some faint connection fluttering . I still tried to record but upon playback, there is no visual waving lines illustrated in SoundForge window nor sound played back. I expected that. What am I doing wrong or is Audigy 2ZS not suitable for such ? FYI, I tried the other5 jacks on the sound car ( adjusting to WHAT U HEAR or LINE IN controls ) .
    The infos in Creative manual and software demo show the 2nd jack of analog sound card from the right being used as a LINE IN for cassette, synthesizer & cd player ( Iguess it goes also for truntable ? - i tried with cd player and it does not work either ) Third jack from the right is only for microphone (also tried but does not work either) . Sorry for lenghty description, I tried all I could . Am retired 7 yrs old and i wish to transfer all my jazz vinyls to puter inorder to make cds. Kindest to All for your help. Merci beaucoup !

    nighthawk7jazz wrote:
    I originally had Sound Blaster PC28. I have installed last year Audigy 2ZS with 6 analog plugs and updated regularly.
    Everything is fine from burning to playing music of any format allowed.
    However, last week I tried to transfer vinyl music to my computer using Sony Sound Forge Version 8 and nothing works. Here's what I did.
    - Luxman Turntable connected with ground to LINE IN ( in DENON amp ) and
    - in the AUX output I have 2 Monster cables boing to my computer twinned on goldplaited /8 jack which is connected to the second (from right) LINE IN in the sound card.
    This done while referring to Manual & Getting Started Demo Creative program in the software. NO SOUND AT ALL COMES IN the computer - while the music is playing qell on my audio system player.
    I've done all kind of adjustment with the Microsoft Volume Play & Recording Controls and with Creative Mixer.
    I can only distinguish on Sony Sound Forge two volume bars that there is some faint connection fluttering . I still tried to record but upon playback, there is no visual waving lines illustrated in SoundForge window nor sound played back. I expected that.
    What am I doing wrong or is Audigy 2ZS not suitable for such ? FYI, I tried the other5 jacks on the sound car ( adjusting to WHAT U HEAR or LINE IN controls ) .
    The infos in Creative manual and software demo show the 2nd jack of analog sound card from the right being used as a LINE IN for cassette, synthesizer & cd player ( Iguess it goes also for truntable ? - i tried with cd player and it does not work either )
    Third jack from the right is only for microphone (also tried but does not work either).
    Sorry for lenghty description, I tried all I could . Am retired 7 yrs old and i wish to transfer all my jazz vinyls to puter inorder to make cds. Kindest to All for your help. Merci beaucoup !
    Connections:
    Turntable_(out)-->(in)_[Denon phono input w/ RIAA preamp]_(out)-->(in)_[Audigy Line-In (see the user's guide)]
    (if you want to play back through Denon amp, --> [Audigy line-out [_(out)-->(in)_[Denon line-in (playback or aux-in)].
    Software settings:
    Creative CT Mixer
    - enable Wave and Line-In sources, set level to 50-00%
    - set .Rec source to AnalogMix(), set level to 50-00%
    - find the best levels (I normally have these set as: line-in = 70% (.rec = 00% if not using ASIO drivers))
    SoundForge:
    - (depending on device driver mode you're using and which A2ZS model you have there), set input to AnalogMix() (w/ ASIO) or just select the one meant for Line-In,
    - set recording levels
    jutapaMessage Edited by jutapa on 08-29-2006 09:4 AM

  • HT204266 is wave burner included with the download of Logic Studio from the app store?

    is wave burner included with the download of Logic Studio from the app store?

    Hi HandletheTruth.
     I will be able to assist you.
    The MF Toolbox 4.9 software supports scanning in the document using OCR processing; however, you will need a separate OCR software that will allow you to edit the software.
    I hope this information is helpful to you.  Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Why is it that when I saved the waveform of my acquired signal into a wav file, the output waveform of my saved file turn out to be different from my input signal?

    Hi all,
    I am currently doing a heart sound analyzer project. I acquired signal using NI USB 6008 continuosly. My program is able to saved the acquired signal into a wave file. But when I browse open the saved file, the output waveform did not look the same as the acquired input signal and also the sound of the heartbeat captured cannot be heard from the loud speaker though I have saved the file as a wav file. I am not sure if the method i use to save the acquired data as a wav file is correct.  I have attach the print screen of the differences of the output I have notice and the program I have created. I would be glad if anyone here is able to troubleshoot my program.
    Thanks. 
    Attachments:
    heart sound analyzer.zip ‏257 KB

    Hi Brett Burger,
    Thanks for your reply. For your information, I have set the sampling rate as 10000 as for the sound format, I have set the bits per sample as 16 bit, the rate as 11025 and the sound quality as mono. I tried using your method by changing the sampling rate as 8K but still my program encounter the same problem.
    I wish to also create a button that is able to generate a preformatted report that contains VI documentation, data the VI returns, and report properties, such as the author, company, and number of pages only when I click on the button.  I have created this in my program, but I am not sure why is it not working. Can you help troubleshoot my program. Or do you have any samples to provide me. Hope to hear from you soon.
    Many thanks.
    Regards,
    min
    Attachments:
    Heart Sounds1.vi ‏971 KB

  • How can I get 'sync' signals for sine wave out? [FPGA USB 7856R]

    Hello,
    I'm Sean Ahn using NI 7856R, USB FPGA with LabVIEW 2014.
    I'm trying to make 'sync' signals for sine wave of adjustable frequency, like general function generator's sync out.
    I use sine waves whose frequency is feedback-congtrolled between 25~30 kHz and need sync signals of square wave.
    Like [1] below, when I try resettng two wavefom-generators, sine and sync signals are not perfectly synchronized.
    And everytime I adjust sine's frequency, the phase difference between sine and sync changes arbitrarily 
    In case of [2] using 'zero-crossing detector', I have severe jitter of sync signals not suitable as 'sync' signals for other parts.
    Please, give me some help.
    Thanks in advance
    Sean Ahn
    [1] Reseting two waveform generators
    [2] Zero-crossing detect

    Here’s my issue.  When I try to move any data between my PC and the iPad2 I receive an error message that states that “the [sync] session could not be started with the ipad, Please disconnect and reconnect the iPad and try again”
    I have tried again and again by various methods etc .  and all I get is the same message when I attempt to sync, backup or update the iPad. 
    I have tried the following AND FAILED:
    Deselect all Apps, Music etc in iTunes, then attempt to sync
    Disable and enable the iPad in device manager and restart itunes and try to sync again
    Disable and enable Apple Mobile Device Services and sync/backup/update
    Run iTunes as Administrator
    Reboot all devices (iPad buy pressing two buttons at once)
    Turn off all security and reboot and sync
    Connect directly to internet without a router
    Tried to sync with all wireless turned off and in airplane mode
    Running iTunes Diagnostics...... nothing all test passes
    Changing USB ports and cables
    Removing my SIM card and rebooting and trying to syc
    Trying to sync via wifi only
    Turning off all icloud services
    Uninstalling all Apple Software and reinstalling again
    I am syncing to a 64bit  PC running Win 7 Premium with all the latest updates, all firewalls off. WiFi and direct connect ethernet to Internet service with and without router.
    I am trying to Sync an iPAD 2 running iOS version 5.1.1 (9B206)
    I am trying to update from iOS 5.11 to 6.01 by using Itunes 11.0.0.16.3 in a USB or directly through the iPad via wifi.
    Please help as everything I have tried has failed.

  • Cannot record in creative wave studio / Audigy 2

    I have a windows xp x64 machine with a Audigy 2 ZS. I've been able to do?recording through line-in using the creative wave studio and the older drivers for audigy 2 ZS but after I updated to the latest driver I can't get a signal from line-in anymore. I can still hear the audio but it simply won't record it. I'm very sure the setting I used in both wave studio options and the audigy surround mixer didn't change (recording from analog mix / what I hear ). Even the windows built-in?sound recorder couldn't record anything. I see other people posting similar problem but there doesn't seem to be a fix to that. I would like to know?if that really is a driver issue. I want to find the older drivers and stick to that until creative decide to look into that. If anyone knows how to fix this or the location of the old drivers archi've please let me know.
    Thx in advanced.

    Try this:?Go to "recording devices."?Select the device you are using. Click "properties" of the device you are using. Click "advanced" tab. If your set up is like mine, you will see a window with different recording modes, and a mono recording mode is selected by default. Select a two-channel mode and your problem should be solved.

  • Broadcast Wav files from PT to Logic not moving to original record position

    Okay, my system needs upgrading but I'm stable (at least I think I am til now!) I have a TV network sending me broadcast wav files from PT. They shoot their video on a 24 hour clock. I'm to be editing and mixing (in Logic) their audio tracks from PT and send them back as broadcast wav files for them to sync back to their video. After years and years of recording and producing music, this TV world is a first for me. 2 issues at hand that are causing trouble.
    NUMBER 1: The wav files will not snap to original record position. I keep getting an error message about "out of range" and of all craziness with a negative SMPTE number. ??? The prompt suggests an offset error. But there isn't I can find. Start time is set to 0:0:0.0.0 here and at the TV studio. They film at 29.97d. That matches as well. Sample Rate is correct at 48k 24bit. I've uncovered every thing I can think of. I did have to set the tempo down to 5 BPM in order to see a full 24 hours in SMPTE.
    NUMBER 2: I can't figure out how to see the timestamp start time of the audio files in the audio window. I have every option turned on in the VIEW option, I can see length, but I see nothing about start time of original record time. Am I missing something simple here? Seems like a very standard option that should be easily accessible. It would allow me to prepare the location on the time line.
    Overall, I'm hoping I can do all the above with my current rig but realize that the clock is ticking toward a whole new system with Logic 9.
    Help please. Don't want to lose this client.

    Sure do appreciate everyone's willingness to help. Setting SMPTE start to 24:00:00.0.0 didn't work either. I confirmed with the studio manager at the TV station also that they run a 24hour clock with 0 being midnight.
    I'm really hoping that the error is on their end.
    *It would help me if anyone knew how to VIEW the Timestamp info attached to the wav files. That would at least give me an approximate idea of where they should be.*
    I'm supposed to be editing and mixing the voice dialog from numerous different scene takes that were shot throughout a day of filming. It's critical that I can see all these different takes that were captured over hours of open recording. Some of the files are almost 4 hours long. It's a big project and I'm sure hoping I can stay inside Logic to get it all done with excellence.

  • Splitting .wav Files from LPs in WaveStu

    Hi,
    Does anyone know how to split a large .wav file using Creative WaveStudio? I haven't been able to find out how in the help files or online knowledgebase.
    I have a SB Li've! 24-bit and have successfully recorded LPs to .wav files in 96kHz/24-bit resolution (I plan to take advantage of the higher resolution afforded by the DVD specification over normal audio CDs and make music-only DVDs). I've been capturing whole sides of LPs and now need to split the resulting file into tracks.
    I can think of two work arounds:
    ) record one track at a time.
    2) make individual tracks from several copies of the large file.
    But it would be easier to just be able to split the large file into individual tracks. Any help would be much appreciated.
    Thanks.

    if you only deals with STEREO 24/92 files then wave studio should be able to split them easily.
    if you're dealing with multi-channel 24/96 files then I think Goldwave isn't able to process them correctly (it's not indicated it supports multichannel files in the product description).
    If you plan to play your records on a PC only, then why you do not compress them with Windows Media codec (lossless for 5./24bit/96kHz, or Professionnal for 7./24bit/96kHz max). You'll be able to fill more your compilations without any hearable audio loss (with the lossless one yes).
    Windows media encoder can do this very well, as well as indexing its media formats.

  • Wave Studio says "device doesn't support this format"

    ?Wave Studio says "device doesn't support this format"'I have a X-Fi Extreme Music card I'm using in Windows 7 (x64). I haven't had any issues with the card or the software until I installed a codec pack: Shark Windows 7 Codec pack. It worked OK, but when I try to play a WAV file in Creative Wave Studio (7), I get an error message: Sorry, your audio device doesn't support this format". Weird, since Wave Studio's "nati've" format is WAVs!!
    So I uninstalled Shark, uninstalled Wave Studio, and uninstalled (from Device Manager) my sound card. Rebooted, then reinstalled the driver for the sound card, rebooted and reinstalled Wave Studio. I still get the error message and can't play WAVs in Wave Studio. The version is 7.2, and the driver is 6.0..375 (5/5/200). Anyone have any ideas?
    Thanks,
    Laner

    CThe point is moot now, I've gotten a new computer and installed the card in that machine. Everything works great now. I would imagine there was a registry issue that didn't get cleaned, or something similar. Still, it would have been nice to resolve the problem, as someone else might experience the same issue and could find a way to help get it taken care of.
    Cheers,
    Laner

  • Creative Wave Studio - VST plug-in failed to l

    I have a number of VST's that I've deleted from my machine. Wave Studio continues to search for these... any idea how to get the program to stop looking for these DirectX plug-ins...

    You can adjust the zoom factor by 'painting' (drag w/ mouse fr. left to right or vice versa) some area in that lowest horizontal window which is showing the whole audio data rendered.
    If you open the Help and search for Zoom - it's told there that you're able to set the ratio manually (IIRC, it didn't work in vers. 5.0).
    jutapaMessage Edited by jutapa on -30-2006:02 PM

  • Nokia 112 Signal Receiver Problem

    I am Using Nokia 112 (New Mobile).So many time tower is getting hide..And automatically tower is coming.In main cities also this problem is coming.I have cleaned my sim then inserted.But till that problem is coming.Actually Nokia 112 Having this type of Signal Receiver Problem? For new mobile i want to service?

    You may try another SIM (borrow from your friends / family members) . Preferably you may try SIMs from different operators. This will tell you whether its the problem with your Phone, your Operator or your particular SIM. If all SIMs give same result, it may be an issue with the phone..If other Operators SIM work fine but the other SIM from the same Operator as yours do not then its Network issue. If all othe SIMs work then get your SIM repalced ..           

  • I am unable to receive or send email from my IPAD.  The error message says "Connection to server failed".  Help!! geandreamer44

    I am unable to receive or send email from my IPAD.  The error message says "Connection to server failed".  Help!! geandreamer44

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    If that doesn't help, tap Settings > General > Reset > Reset Network Settings
    You will have to re enter your Wi-Fi password.
    If nothing above helped, restart your router.
    No data is lost due to a reset.

  • TS3899 cannot receive or send email from my hotmail account, refuses to verify server. I have changed my password, deleted the account numerous times, any solutions? all on ios 6.

    cannot receive or send email from my hotmail account, refuses to verify server. I have changed my password, deleted the account numerous times, any solutions? all on ios 6. it was working up until a few days ago and now refuses to load on both my ipad 2 and iphone 4S
    in the process deleted all my contact, very annoying.
    all help is much appreciated.
    interesting that my gmail account does work perfectly.

    this may or may not help - but give it a try.  On a forum some were reporting that talk21 is now under the yahoo umbrella.  below are the steps this use listed.  (This was an android forum, but the email settings should be the same.  In short it looks like their server names have changed.  An existing account may have simply been forwarded - but if you are reinstalling, it may want a clean install to the right servers.)  Pay particular attention to the server names and port settings.  (this thread was started based on a discussion of Imap vs pop - you are already an Imap person - so ignore that part)
    See if this helps.
    why settle for pop3, when IMAP works with talk21 and not only does mail get pushed out faster with IMAP, but when you click refresh it will be received faster than pop3.  The other advantage is subfolders are also supported with IMAP but cant be seen with POP3. This mail feature works with my android eclair & hero phone and the settings are exactly the same for win mobiles also (not tested). The mail setting up roadmap is the same from what i can remember once in the mail feature for win mobi. 
    This is what you need to do to setup Talk21 email with IMAP. 
    Incoming server settings
    IMAP server - imap.mail.yahoo.com
    Port - 143
    Security type - none 
    Outgoing Server settings
    SMTP server - smtp.mail.yahoo.com
    Port - 25
    Security type - none Also important note - Enable 'require sign-in'
    and enter your talk21 username and password The End...works a treat for me p.s. Its only taken me 3 years to work it out with win mobile and recently with android. Finally got it to work...hope this helps all the talk21 users out there. if there are any other similar posts out there with no answer...dont forget to mention my name when passing this post around.

Maybe you are looking for