No signal to projector from atv3

I have a problem with my atv3, it works fine when connected to tv but when I connect itto the projector, I get no signal! has anyone else had the same problem? please help! (projector is a Benq w1060 1080p) I may add that I had a atv2 before and it worked really well!

Thank you!
I've tried everything except changing hdmi cable, do you have any tips on what cable Ishould buy?, the hdmi cable I have now is a 1.4-certified HDMI cable with goldconnectors, 10m, and costs around € 70

Similar Messages

  • Can I show keynote on a projector from an iPad 1?

    Is there anyway to show a keynote on a projector from the iPad 1?

    Take a look at More Like This ... to the right of this post!

  • Signal express record from 3rd party VI driver

    Hi,
    Highlight - Can I record data from a 3rd party VI driver in signal express?
    Detail - I am tasked with developing a 'easy to use' data logging system for both voltage and temperature. Voltage will be logged via a NI cDAQ module, no problem here, temperature however will be logged from a LakeShore temperature controller, ie from a third party driver. My first thoughts were to use Signal express rather than coding my own GUI, obviously SE is easy to use for cDAQ Voltage modules.... but has it been crippled to prevent the use of VI drivers for third party kit? 
    Ideally I would like multiple series plotted and recorded by Signal Express, some from the cDAQ modules and some from one or more Lakeshore temperature controller and monitors, is this fundamentally possible in Signal Express? I can see that SE seems to have the ability to run labview VI's so I am hopefull! 
    I am using NI 2013 - full bells and whistles.
    Cheers,
    Chris

    Hello wonderwizard, 
    Yes you can use a Plug & Play Instrument driver. Some examples have already been created and mentioned in this Knowledge Base Article. 
    http://digital.ni.com/public.nsf/allkb/BC2CE741752EE09086256FFE00779D67?OpenDocument
    Hope this helps.
    Shazil M.
    CLAD
    Applications Engineer
    National Instruments UK & Ireland

  • Starting a flash projector from terminal

    Hi everyone,
    i have the following problem and it drives me mad. I´m
    developing a Flash game which retrieves data from a java Server.
    For presentation I have both things, the server and the
    Flash-Projektor on the same Computer. What I want is: Both
    programms startet with on click (one doubleclick :-) ) so I tried
    to start the server using fscommand but since the Server is a never
    stopping Thread, Flash blocks and waits for the application to
    end...which will never happen. So my new try is to start the Flash
    projector from tha java server interface via runtime.exec();
    everything I need now is what I have to enter in the Terminal
    (using OSX!) to start a Flash projector. I just can´t figure
    it out.
    Another thing would be: it doesn´t have to be a
    projector...could be normal swf also...then start it with a
    standalone player...but same problem: how do i start a standalone
    player from the terminal giving it the file he should open? Are
    there parameters I can pass to it? Anybody? Help!!!

    ok well you might be able to solve this by exectuing an
    AppleScript
    from the terminal, I don't rememeber the exact command but it
    can be
    done.
    You might also consider creating you app with mProjector for
    OS X, it
    adds many new commands into Flash including and openDocument
    command
    and an executeApplication command. It also allows you te
    create
    multiple window applications via a createWindow command - so
    you may be
    able to do what you need to in one application. Oh yeah and
    there are
    Flash Shaped windows, sometime very cool for games...
    check it out the calls mentioned a all here on the API docs
    page
    http://www.screentime.com/software/mprojector/docs/index.html
    Download the demo, it will installed the mProjector classes
    right into
    flash. Export your swf build the app in mProjector and away
    you go..
    John Pattenden
    Screentime Media - Flash Tools since 1997
    http://www.screentime.com

  • Director 11 - Publishing Mac Projector from Windows

    When publishing a Mac projector file from Windows XP, the
    files created do not function correctly when I test them on a
    Macintosh computer (OS 10.5). Even though I publish as a projector,
    the application is not self running and will display a message that
    Shockwave is required to run the program. The program will run
    properly on Macintosh computers that have Shockwave installed.
    It seems that the files that are created in the Frameworks
    folder (within the .app/Contents folder) have data in their
    resource forks and this gets stripped off on the Windows system. I
    thought Director 11 had resolved this issue so that you could
    publish a cross-platform projector that would be ready-to-run.
    If I move the .app folder to a Mac and replace the Frameworks
    folder with a Frameworks folder that has been created with Director
    11 on a Macintosh system, the program runs correctly without a
    Shockwave install.
    Has anyone else run into this, and if so, is there a fix for
    it? I need to be able to publish both Windows projectors and Mac
    projectors from my Windows system.

    Hi Phil,
    thanks. You're right, it's impossible to set icon or background image, but it seems to work stable.
    Do you know, if the D11.5MAC-generated projector works under MAC OS 9 / WIN95/98/NT/2000/Vista/7?
    I feel sorry for you because of the UDF file system. Therefore I have no idea.
    But apple has changed the way how files are connected with their applications. You can now (since 10.5) define that all files with a certain file extension has to be opened with a concrete program. But I also know that it doesn't work correctly in all cases. So may be it has something to do with that instead the way how the ROM is read with 10.5+ opposed to 10.4
    Am 11.12.2009 um 16:20 schrieb PhilGibson:
    From what I understand, the "Mac & PC" option in Toast will make a disc that is pretty much compatible with most OSs.
    It allows you to specify separate files for the Mac and the PC side of things. What it doesn't do is let you set icon layout or a background image for the window, like the Custom Hybrid option does.
    I've personally used "Mac & PC" discs on Mac OS X 10.4-10.6, Windows 98 SE, XP, and Vista with no issues.
    This is great if it can solve you problems. I just wish there was a solution for making the Mac projectors work as ROM content on DVDs (UDF volumes), which is what I'm working with 75% of the time as of late. It's primarily 10.5 and newer where the issue pops up, as Apple seems to have done something with how the ROM portion is read with 10.5+ as opposed to 10.4.
    >

  • Making Dir11 PC projector from Mac issue

    Hi,
    I am using iMac 2007 (Intel) and Director 11. I am trying to make a PC projector from the Mac, with Buddy API and BuddyMenu Xtra in it. I followed the instructions of how to install these xtras that I downloaded from the buddy website. But when I tried to publish (make the projector), it says it cannot find Text Asset Xtra, baWin.xtra and Buddy Menu Xtra.xtra. I make sure that these xtras are in the configuration>xtras folder but the messages still show up. Why this problem shows up, I don't understand.
    Please assist,
    regards, Jeff

    I am using iMac 2007 (Intel) and Director 11. I am trying to make a PC projector from the Mac, with Buddy API and BuddyMenu Xtra in it. I followed the instructions of how to install these xtras that I downloaded from the buddy website. But when I tried to publish (make the projector), it says it cannot find baWin.xtra, Buddy Menu Xtra.xtra and Text asset xtra. I make sure that these xtras are in the configuration>xtras folder but the messages still show up. Why this problem shows up, I don't understand. This makes me unable to create PC projector from my mac.
    Please assist,
    regards, Jeff

  • E2500 - Weak signal that fluctuates from weak to nonexistant

    This router is really easy to set up but requires a ton of tweaking to get any sort of decent performance out of.
    Even with these tweaks the signal is very weak. My old WRT54G had a stronger 2.4ghz signal than the E2500 produces.
    Sitting one room away from the router and the signal is very weak. Forget being across the house. The WRT54G could cover almost the entire house with a network connection wirelessly, this thing can barely get a signal outside the room it sits in (same room the WRT54G was in).
    What's great about it: Easy to set up
    What's not so great: Weak signal that fluctuates from weak to nonexistant
    This product has...
    Unreliable connection
    Short range
    slow connection
    About me...
    Technology guru
    Gamer
    No, I would not recommend this to a friend.
    I use it in...:Large home

    The performance of your new router depends on various factors apart from the router itself. The wireless devices in your network, are they wireless G or wireless N devices? If they're wireless G devices, you won't really see any difference, and in fact any N devices in your network would also suffer because of that. Apart from that, placement of the router also matters.
     Avoid keeping the router in a corner or under the table or something like that. Ideally you'd want to keep it at a higher location. The signal always travels better from a higher location to a lower location. Apart from this, you can also change channels on the router. Typically, wireless interference can cause poor signal strength and speed. Changing channels helps alleviate this problem to some extent. I'd suggest trying channels 1, 3, 6 or 9. You'll have to try each and observe which channel gives you the best performance. Every network environment is different, so what works for one network may not necessarily work for another. Please let me know if you need any further help with this.

  • HT2494 How do I output video to a projector from my MacPro17 with only firewire and USB ports?

    How do I output video to a projector from my MacPro17 with only firewire and USB ports?

    No Mac Pro only has Firewire and USB.    Perhaps you've misidentified the computer:
    http://www.everymac.com/ should help.

  • How do I drive two Dell M110 projectors from my new 15" Macbook pro

    I am trying to drive two Dell M110 projectors from my 15" Macbook Pro.  When connecting one projector via the HDMI port I am able to utilize two seperate "screens" (laptop screen and projector display), but when I connect any projectors via the Thunderbolt port I am only able to clone the laptop desktop across all the connected displays.  I want to be able to display a seperate image on each display.  I am running Mountain Lion 10.8.2 and Windows 7 via Parallels 8.  Thank you.

    Please note that if Office is being removed to fix a problem prior to re-installing a new copy AppCleaner will not do what is needed, it is important to follow Microsoft's directions exactly, AppCleaner does not.
    Carolyn Samit's link is the correct method.

  • No video signal on projector (Lion, MacBook Pro)

    Hi guys
    since I've update to Lion (10.7.2),  I have problems getting a video signal via mini-DVI / VGA to certain projectors. I'm using a Mac Book Pro (end of 2008). I have never encountered similar problem with previous versions of Mac OS X. Restarting the MacBook or the projector doesn't help. Does anybody have an idea what to do?
    Thanx
    fweth

    I also update to Lion from 10.6.8.. My Dell 3300MP projector worked fine with Snow Leopard. Then with Lion, there is occassionally scrambled signal, but most of the time no signal.. Tried restarting projector, restarting computer, turning mirroring off and then on, but no help. I am running an early 2011 13" MBP.. Really frustrating for someone who does lots of presentations and teaching.

  • Connecting DVI Cinema Display and VGA Projector from Minidisplay Port

    Hi Everyone!
    I'm trying to get my mid 2011 Mac Mini to send a signal from my MiniDisplay Port to a vga splitter which works fine. My biggest thing is that when I connect my inFocus IN112 VGA Projector the screen shows up from my mac but to connect my Cinema Display it takes VGA so I had to go from the VGA Splitter on one side and use a vga to dvi adapter and my cinema display shows blank? Help Me Please!!
    Thanks,
    Andrew

    I already have a converter on the end of the VGA Splitter to go to the Cinema. The reason I don't use the hdmi to dvi is because with the minidisplay port using vga to the projector and the hdmi going to dvi to the Cinema it makes the projector screen very rough and pixely

  • Imac with radeon x 1600 graphics card will not send signal to projector

    I am using an Imac running Boot Camp. The Imac has a Radeon X 1600 graphics card. I have installed the latest driver in XP. The Device manager recognizes the correct card.
    The problem: I cannot get our projector to pick up the signal from the Imac. I have systematically gone through all the display settings. Others who have similar problems seem to have graphics cards with additional software that allows them to select a clone display feature.
    Any thoughts? The projector works fine with a macbook running bootcamp (xp).

    Hi Cathy and welcome to Discussions,
    sounds to me as if you are missing the Catalyst Control Center, which usually provides these kinds of setting.
    You can download both Drivers and the Control Center from the ATI/AMD website here: http://ati.amd.com/support/drivers/mac/bootcamp-xp.html
    The Control Center needs a Windows where the .NET Framework (2.0 at least) is already installed before installing the Control Center, otherwise it does not work.
    You can download that from Microsoft http://www.microsoft.com/downloads/details.aspx?FamilyID=0856eacb-4362-4b0d-8edd -aab15c5e04f5&displaylang=en
    Hope it helps.
    Good Luck
    Stefan

  • Mavericks - no signal to projector

    I installed Mavericks on my MacBook Pro (early 2008) with the purpose of showing slideshows at my local camera club using FotoMagico 4, which required the latest version, as that's what I had used on my iMac to create the slideshow.  I was unable to get any signal from my MBP to the Canon projector.  This had never been a problem when I used 10.6.8, but after many hours of trial and searching the community forum I have been unable to get a signal from 10.9.1.  I've tried all the suggestions offered by people who have had similar difficulties with external displays.  I had to confess to the camera club that I couldn't get a signal now from my Mac, which elicited some jeering!  The projector worked fine for a stand-in using a PC.  Can anyone solve this problem for me?  This is the thirtieth anniversary of the Mac, and it's also thirty years since I first used Macs.

    I have found the problem and its solution.  The DVI output from my MBP to the DVI input on the projector turns out to be analog rather than digital.  Selecting the analog input on the projector allowed the signal to be received.  Perhaps I need to get a new cable?!  Hope this helps those who have been kind enough to look at the question.

  • No 1080p output from ATV3

    I have my ATV3 connected to my 1080p projector through a DVDO iScan VP-30 and the ATV3 will only output in 720P mode and doesn't even list 1080P in the choice of output resoluions. Does anyone have any ideas on this issue?
    My projector is a Marantz VP-11S2 and supports 1080p

    I have tried this and I get an "out of range" message from the projector.
    All my video settings are set to Auto on all devices.
    The troubleshooting for the projector suggests changing the output resolution V (Hz) and/or refresh rate of the device.
    I occasionally get a flash of the ATV3 home screen but then it goes away again.
    The 1080p output from all my other players work fine when connected directly.

  • TS1398 Very weak WIFI on my new iPad MD511LL. Tried Apple suggestion, but they didn't work. Signal is variable from zero to two - never shows three 'bars' even on stronger wifi system. Could this unit be defective?

    Just bought it last week. Have synced it with my main computer. It gets WIFI most of the time, but the signal never goes above two bars (curves) even when I'm in a strong WIFI area. Rest of the time it varies between zero bars (no service) to two bars - slow, slow, slow.
    Already did the recommended shutdown and the WIFI on and off suggestions made by Apple. Already compared to other equipment, which receive a solid, strong three bars at all the same locations. Since this is the WIFI only model,quite alarmed at the problem. I need the WIFI to be able to pick up the signals better.
    Could this be an antenna problem?? Behaves this way even when not in any case.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

Maybe you are looking for