No Signal with Airport Extreme (Integrated) card - iMac G5 [Help!]

Hello all,
Finally experiencing my first issue with a Mac. I have a Second Generation iMac G5, purchased in June of this year (2005). I have used it's integrated Airport Extreme card to connect to my WLAN since I purchased it, with the only issue being I have to occasionally power cycle my Linksys router to re-enable wireless (When this happens, all of my wireless computers are affected)
This evening, while on my iMac G5, I lost internet connectivity (iTunes was unable to look up CD music track info from the web)..Safari wouldn't load pages either. So i power cycled my wireless router again.
After it came back up, My signal strength stayed at 0 on my iMac. After power cycling the router, turning off/on my Aiport card, and rebooting my mac, my signal strength is still at 0.
I am also using a piece of software called MacStumbler to detect networks and signal strength. Randomly, it's picking up my network: It'll pop up and then dissapear.
I have not moved my iMac this afternoon, or even recently (Since July). I put it to sleep in the evenings. The Airport card is integrated so there's no antenna to come loose.
Any Ideas? Suggestions? Thanks!

Tom, Belbe,
Thanks for your responses. I still dont know what "WAS" causing my Integrated Airport Extreme Problems. I turned my iMac off last night and left it off all morning until around 12 AM CDT or so. When it came up, the wireless worked fine..and has all day.
Belbe, i have the "Put hard disks to sleep whenever possible" un-checked, and have for a while. My wireless went out while my machine was up and running and while i was importing music in iTunes. It may have been my router just not accepting my iMac's MAC address after I power cycled it.
I'll mark this as answered and move along quietly

Similar Messages

D-Link Airplus G DI-524 with Airport Extreme + Bluetooth card

First post, just recieved my very first Mac last night. Long time PC editor on Premiere / Vegas finally making the port over.
Anyway, my new airport extreme card doesn't seem to jive well with my OLD microsoft wireless networking router. So I was thinking of getting the D-Link Airplus G DI-524 wireless router to replace it, as opposed to spending $200.00 on an Airport base station.
Has anyone tried or had any experience with this router?
Here are the specs, it seems to match up pretty well to the Airport Base:
General:
Manufacturer Name - D-LINK SYSTEMS
Manufacturer Part Number - DI-524
SAP Description - WLS CABLE/DSL RTR-4PT SWCH 802.11G 54MBP
Weight for Shipping - 1.860
UNSPSC Code - 43222609
Device Type - Wireless router
Form Factor - External
Antenna:
Antenna - External detachable
Antenna Qty - 1
Environmental Parameters:
Min Operating Temperature - 32 F
Max Operating Temperature - 131 F
Humidity Range Operating - 0 - 95%
Expansion / Connectivity:
Interfaces - 1 x network - Radio-Ethernet 4 x network node - Ethernet 10Base-T/100Base-TX - RJ-45 1 x network host - Ethernet 10Base-T/100Base-TX - RJ-45
Manufacturer Warranty:
Service & Support - 3 years warranty
Service & Support Details - Limited warranty - 3 years
Miscellaneous:
Encryption Algorithm - 128-bit WEP, 64-bit WEP
Compliant Standards - FCC
Networking:
Connectivity Technology - Wireless, wired
Integrated Switch - 4-port switch
Data Transfer Rate - 54 Mbps
Frequency Band - 2.4 GHz
Line Coding Format - OFDM
Data Link Protocol - Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g
Network / Transport Protocol - PPTP, L2TP, IPSec
Remote Management Protocol - HTTP
Max Range Indoors - 330 ft
Max Range Open Space - 1310 ft
Status Indicators - Link activity, power, status
Features - Firewall protection, DHCP support, NAT support, manageable, MAC address filtering, VPN passthrough, URL filtering, IP address filtering, domain blocking
Compliant Standards - IEEE 802.3, IEEE 802.3U, IEEE 802.11b, IEEE 802.11g, IEEE 802.1x
Power:
Power Device - Power adapter - external
Powermac G5 Dual Core 2.0Ghz Mac OS X (10.4.4) 2GB RAM, GeForce 6600 256MB, 20" Apple Cinema Display

Dear Justin,
Did you end up getting this router? If so how have you found it?
Thanks,
Scot.

Help! iMac would not Connect/Find with Airport Extreme

Strange issue. I used to connect my Airport extreme with iMac, until recently iMac could not join with aiport. Instead my iMac connected to my neighbor's network. I'm using Time Warner cable.
However, my MBP and my Dell laptop could connect to my airport. Any ideas what could interfere with my iMac? I already called the Tech support and even went to the Apple store, they all said is the iMac since the iMac was able to connect with all the airports at the store. The tech support suggested me to move my airport to a room with less interference. Is that right? the iMac or the airport should I move?
We spent 2 hours, resetting back to factory setting and still iMac could not join Airport Extreme.
Any suggestions or advices are appreciated.
Tom
iMac Mac OS X (10.4.10)
Mac OS X (10.4.10)

Thank you for your e-mail, Duane. Yes, the airport express (hooked up to my stereo in the dining room) does receive iTunes from my G5 in the office. The light is a blinking yellow, but it still receives the signal.
Last night, I was able to get an internet signal on my eMac (with airport extreme card installed) from the VersaLink router that my G5 uses in the office!
I figured out that the eMac and G5 were obviously not communicating with each other, and went to the Airport icon on the top of both screens to make sure that the Location Names were correct. I discovered that I needed to change the G5 from the Airport Express Location (stereo)to the name of the eMac location (Master Bedroom). Then I got the network connection. I suppose to play iTunes to my stereo, I will have to change the location, again, right?
Another comment: I was rather amazed that, after at least an hour and a half phone conversation with three different technicians, no one came close to this solution. And I'm paying for technical help (two years left on a three year contract)! Evidently, it is not common knowledge that a wireless router and an airport extreme card with mini-antenna can communicate? I came close to buying an Airport Extreme Base Station because I thought that I might need it!!!
So, I'm thinking I'm in the right ballpark but would welcome any more comments.
Thanks for listening.
Dave

I have installed Airport Extreme on my iMac, but want to extend the wireless network with Airport Express. Everything is fine until I try to select Extend the wireless network. I select Extend Wireless network but have no success. Ideas?

I have installed Airport Extreme on my iMac, but want to extend the wireless to rooms with a weak signal. The internet connection is fine with the basic setup. As soon as I go into Airport Utility to select Extend Wireless Network and fill in what I believe is proper information, I get an error message that Airport Extreme no longer has an IP address, the internet connection is broken, and under Wireless, that there is a wireless network in existence that can't be found. Rebooting the modem only brings the Airport Extreme back to the starting gate so that the internet is once again available. I assumed (naively) that with the All Mac All-the-Time context, adding Airport Express would truly be Plug and Play. I got the plug, but no play. I asked a Comcast technical specialist about it and he said that I needed to reset the Airport Express settings back to their default, factory status. I looked that process up online and found out that the way to do that was to hold down the reset button, then plug Airport Express into the socket and wait for the green light to flash four times. Then wait 45 seconds and the default settings will return. I did all that, only to find out that after the initial flash of green, green never appeared again. I got a fast flashing yellow light, followed by the light going off. Apparently this didn't reset it properly. So, after hours trying to get this system to work, I appeal to someone who can see through this mess and provide the key to success!
highFly376

Let's see if I can get this straight.
You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
Correct?
See this Apple document:
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
The wireless unit on the right of the diagram can be either of the newer Apple base stations.
Extreme, Express, Time Capsule

Airport Extreme Replacement Card - Mac Pro G5

I have an early Mac Pro G5 dual and just added the Apple M8881 Airport Extreme replacement card. Did not receive any software (driver?) with it. I am running Mac OSX 10.4. The only download I see for this card is for 10.3. The computer sees the card but the card sees no signals. Antenna, including the "T" antenna on rear of tower seems to be all ok. Any suggestions?

Duane,
That's what I thought, thanks. If I put the computer right next to the base station, I get a very weak signal. When I unplug the "T" antenna, the signal does not drop. When I unplug the cable to the "T" antenna, the signal does not drop. When that close to the base station, some signal must be getting directly into the card. The problem must obviously be with the antenna jack and I will be returning the card for a replacement.
Thanks for your help.
Jack

Trouble with airport extreme and express

Hey all. I recently bought a new airport extreme and I'm now having problems setting up a network with the airport express. the airport express that we have is connected to a very old G3 iMac because it doesn't have an airport card and is upstairs. I have so far managed to set up the airport extreme so my G4 iBook and my MacBook Pro are both connected via wireless. The trouble seems to be that I can't get the next step set up as i'm not very experienced with networks and I can't get the express to establish a connection with the extreme. i hope somebody could help me sort out the next step. On a side note, this new airport extreme doesn't allow my xbox 360 to connect to it and i wondered if there is any way I can get it to connect again via wireless, either by changing a setting or the security?
Any help and feedback would be greatly appreciated,
Thanks.

applefan08, Welcome to the discussion area!
To continue to use the AirPort Express (AX) to give Internet access to the iMac G3, you will need to configure the 2 devices to use WDS to wirelessly connect. The instructions start on Page 41 in "Designing AirPort Extreme 802.11n Networks" (http://manuals.info.apple.com/en/DesigningAirPortExtreme802.11nNetworks.pdf).

NEW Airport Extreme 802.11N & iMac G5

Pulled this from the Airport Extreme webpage and don't see the iMac G5 listed as compatible.
Does my Mac support 802.11n?
These Mac computers support 802.11n in the new AirPort Extreme Base Station using the included enabler software:
* iMac with Intel Core 2 Duo (except 17-inch, 1.83GHz iMac)
* MacBook with Intel Core 2 Duo
* MacBook Pro with Intel Core 2 Duo
* Mac Pro with AirPort Extreme card option
So can I use it with my iMac G5?
iMac G5 20" 2.1 w/ iSight Mac OS X (10.4.8)

What that list meant is only those listed computers support the new 802.11n wireless 'standard' (it is not technically a standard yet, still in draft form but it should be ratified as such soon). Nonethesless, your iMac G5 (given it has some sort of WiFi like 802.11a/b/g) will work with the new router because the new Airport Extreme supports all the older specs (802.11a/b/g) as well as the new 'n' (which again, is not completely a standard yet).
So it will work fine but you will only get the same speed as your current WiFi adapter in the iMac, which is standard g I believe. So even though you buy the new router with n, it does not mean you older g WiFi card will suddenly work faster, you would need n cards on both sides for that to be the case...
-TM

Creating a bridge with airport extreme (base) and airport express

i am having trouble creating a bridge with airport extreme (base) and airport express. i got the airport express to connect to my network. Airtunes sees it fine. i have an iMac (running Tiger) connected to the airport express via ethernet which i was hoping to get internet on (the iMac doesn't not have built in wireless and i had a spare airport express). now the airport express is no longer visible to the airport setup assistant on that iMac. but, like i mentioned, Airtunes is working fine, and the light is green.
i'm new to the wireless stuff. i am sure i just missed a step. how do i get the iMac to connect to the internet via my airport express bridging to my airport extreme wireless network?
your help is appreciated.

You can do this with the equipment you have. Configure the AirPort Extreme base station (AEBS) to act as a WDS main base station and configure the AirPort Express (AX) to act as a WDS remote base station. That will allow you to use the Ethernet port on the AX.
Unfortunately WDS also causes the available wireless bandwidth to be cut in half.

How do i set up time capsule to work with airport extreme base to extend wireless network?

i have a airport extreme base, how do i set up a time machine to extend the wireless network i have with airport extreme? i have also 3 airport express's connected to the same network to extend my wifi all over my house. thanks in advance.

Much better graphics, thanks.
You can leave the Time Capsule connected by Ethernet from the Linksys and configure for a "roaming" network as mentioned previously.
To do this, open AirPort Utility - Manual Setup
Click the Wireless tab below the icons
Wireless Mode = Create a wireless network
Wireless Network Name = Same name as the AirPort Extreme
No check mark needed next to Allow this network to be extended
Radio Mode = Same setting as the AirPort Extreme
Channel = Automatic
Wireless Security = Same setting as the AirPort Extreme
Wireless Password = Same password as the AirPort Extreme
Confirm Password
Click the Internet icon, then the Internet Connection tab
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Update to save settings and allow the Time Capsue to restart
Then power down the entire network
Wait a minute or two
Start the modem first and let it run a full minute
Start the AirPort Extreme the same way
Power up the switch
Power up the Time Capsule for a minute
Keep starting devices one at a time about a minute apart
Now, your computer will automatically pick up a wireless signal from either the AirPort Extreme or Time Capsule, whichever device is closer and providing the stronger signal.

Problem with Airport extreme and Time machine

I recently purchased a 320gig external hard drive for Time machine. I connected it to my Airport extreme but it is not being recognized for some unknown reason. If I directly connect it to my iMac it works perfectly. I've updated with the latest firmware and it should work via USB with Airport extreme. Any suggestions why it is not working?

angelop wrote:
I have used the following for about two years.
-MBP, Airport Extreme, External HD (1TB) for my time machine.
You probably know, that's "iffy" and +*not supported by Apple.+* See the Using Time Machine with a USB drive connected to an Airport Extreme *User Tip,* also at the top of this forum.
To get around this issue, I have switched off the Time Machine, and am only turning on once a week or so, to grab any changes or additions I've made. I've been doing this for about 6 months now with no problems.
Now whenever I do this, (It should only be backing up an album or two from iTunes,) it tries to back up my whole system again. EVERY TIME. It did not do this before.
If you go too long between backups, Time Machine will do a new, full backup. And once it decides to do that, it will keep trying until it succeeds. There are some other possibilities as well. See #D2 in the Using Time Machine with a USB drive connected to an Airport Extreme *User Tip,* also at the top of the +Time Machine+ forum.
If none of those seem to explain it, see #A1 there; download the TM Buddy widget, copy and post the messages here.
Why are you only backing-up once a week? Time Machine was designed to back up changes hourly, as long as your Mac is awake and the TC is in range. It will protect you best that way, and unless there's a problem, those backups will usually be very quick.
But if you're only going to back up once a week or so, then Time Machine is not the best app for you. See Kappy's post on Basic Backup, complete with links to the web sites of each product.

HT1218 why is streaming to my TV slowing to .4 mbps from 8.ombps while watching a netflix movie? this has become a problem in the last 2 months. This also happens on another TV but not concurrently.. Is it a problem with "airport extreme" or with the IP s

why is streaming to my sony TV slowing to .4 mbps from 8.ombps while watching a netflix movie? this has become a problem in the last 2 months. This also happens on another TV but not concurrently.. Is it a problem with "airport extreme" or with the IP service? Airport extreme software is up to date.
please advise
Michaelgfrommet

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

Automatic backups more on Drobo with Airport Extreme

Sure you can as I continue to help with your good type, with a similar problem though.
Silk for about 1 week alone makes my iMac 24 inch no automatic backups more on Drobo with Airport Extreme version 7.6.3 Connected via a USB cable. Went up a few weeks ago Actually getting rid of problem with the backup from Time Machine program of MAC OS X version 10.8.3.
I take a can further help me secure forgive me my english is not my native language.

The Timed Access settings in AirPort Utility will allow you to control "who" connects to your network and "when" they can connect.
AirPort Utility >Click AirPort icon > Edit > Network tab > Enable Timed Access
For more information, click the Help menu at the top of the screen
Click AirPort Utility Help
Click Setting up a WiFi network,
Click Control when a user can access your network, and also
Click Control access to your wireless network.

Will a wireless printer work with airport extreme?

Will a wireless printer work with airport extreme? Such as an HP Photosmart D110.

Yes, it will as long as it is within wifi signal range of the Extreme. Of course, you'll need to go through the printer setup sequence. NOTE: The D110 is not AIRPRINT compatible, so it will not print from ios operating systems that are installed in mobile devices such as iphones, ipads, ipods. However, there are Apps that are available for non airprint printers, but their quality and effectiveness are questionable.

Lost signal on Airport Extreme after return from sleep

Everyday I lost my Airport signal after my computer turn on sleep for a long time.
but no prb at all if I work on it... 2,3,4 8hres
after "wake-up", impossible to "reactivate" ANY connexions !!!
Only a full restart of my computer solve this prb :-(((
Do you have any ideas ?
- firmware ?
THX, Denis
AirPort Card Information:
Wireless Card Type: AirPort Extreme
Wireless Card Locale: USA
Wireless Card Firmware Version: 405.1 (3.90.34.0.p18)
Current Wireless Network: PRIVATE
Wireless Channel: 6
Hardware Overview:
Machine Name: PowerBook G4 15"
Machine Model: PowerBook5,2
CPU Type: PowerPC G4 (1.1)
Number Of CPUs: 1
CPU Speed: 1.25 GHz
L2 Cache (per CPU): 512 KB
Memory: 1 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.7.1f1
Serial Number: V7349D2XNRZ

I've found the prb !!!
go into system preferences and delete all the locations that were using airport.
Then go into keychain (utilities) and delete any airport passwords.
Turn the m/c off amd back on again and start from scratch.
All is now fine.
Denis

Can I use my iPad with airport extreme to retrieve files from a USB connected hard drive?

Can I use my iPad with airport extreme to retrieve files from a USB connected hard drive?

Yes, I believe so. Please check out the NetPortal app. I don't have an iPad, but I use it on my iPod Touch to access files on my Time Capsule. It is available from the iTunes App Store.

No Signal with Airport Extreme (Integrated) card - iMac G5 [Help!]

Similar Messages

Maybe you are looking for