No SIM service after iPhone 4 upgrade?? could you suggest me what to do?

I upgraded my phone on itunes ......after which the setup is stuck at insert the approriate sim card........ I quite dint understand how I lost identification of my service sim card after upgrade??.......Can someone help me please?

sounds like your phone was hacked to work with your current SIM card.  Upgrading the iOS re-locked it to the original carrier.  You won't be able to activate your iPhone without a SIM card from the carrier to which is was originally locked.

Similar Messages

  • My tabs have not been saving recently after I close them, could you tell me what's wrong?

    So I've always had about 10+ tabs open and every time I would close my window, and open back, they are all still there. Recently, when I closed my Firefox window it would just open back to my homepage. I've already went to options>general> and did the keep tabs open thing, but it doesn't work anymore

    You can also check for issues with session restore.
    *http://kb.mozillazine.org/Session_Restore
    *https://support.mozilla.org/kb/Session+Restore
    It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
    Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox Profile Folder.
    *Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
    *http://kb.mozillazine.org/Multiple_profile_files_created

  • Hi helpers I have very old MacBook 10.5.8 please could you tell me what operating system I should get to be able fully use my laptop as i cant use it properly anymore and doesnt connect with my Iphones etc thanks

    Hi helpers I have very old MacBook Mac OS X 10.5.8 please could you tell me what operating system I should get to be able fully use my laptop as i cant use it properly anymore and doesnt connect with my Iphones etc thanks

    Josejanko,
    You don't supply much info other than your machine is old, so here is some info for you to check thru.
    Before doing anything you should have a back up, preferably 2, in the event something goes wrong.
    You would have to start by upgrading to Snow Leopard, you would need to buy the disk for about $20 here  http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard  
    Check the the requirements to see if your machine meets them.
    You would then need to run the 10.6.8 v1.1 combo update to get it to 10.6.8 Mac OS X 10.6.8 Update Combo v1.1
    You can then access the APP STORE and possibly upgrade to to further OSX.
    You may have applications that will not be compatible with any thing past Snow Leopard, you can check those here Upgrading to 10.7 and above, don't forget Rosetta!
    http://roaringapps.com/apps
    Office 2008 will not work with anything newer than Snow Leopard for an wxample
    You may be able to upgrade to Lion or MT Lion or Yosemite, depending on your machine, from the APP STORE.
    OS X Lion - Technical Specifications Lion
    http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion Mountain Lion
    http://www.apple.com/osx/how-to-upgrade/ Yosemite
    Hope this helps you

  • I have a macbook pro with 250 GB of Space, 2.2 Processor, 16 GB of Memory 1600MHz, and Intel Iris Pro 1536. I backed up my apps using iTunes but I am having a hard time restoring my apps back to my iPhone 5s so could you please help me?

      I have a macbook pro with 250 GB of Space, 2.2 Processor, 16 GB of Memory 1600MHz, and Intel Iris Pro 1536. I backed up my apps using iTunes but I am having a hard time restoring my apps back to my iPhone 5s so could you please help me?

    So did you ever get your apps back on your iPhone?

  • I have adobe premiere elements 13 and i imported my video to my computer i click edit video, then it tells me to sign in. so i sign in then accept agreement and nothin happens after that could you tell me whats going on please

    i have adobe premiere elements 13 and i imported my video to my computer i click edit video, then it tells me to sign in. so i sign in then accept agreement and nothin happens after that could you tell me whats going on please

    i have adobe premiere elements 13 and i imported my video to my computer i click edit video, then it tells me to sign in. so i sign in then accept agreement and nothin happens after that could you tell me whats going on please

  • Could you plesae explain what is by-product ?

    Hi Experts
       could you plesae explain what is by-product ?
    Glen

    Hi Glen,
    By-product is a secondary or incidental product deriving from a manufacturing process, a chemical reaction or a biochemical pathway, and is not the primary product or service being produced. A by-product can be useful and marketable, or it can have negative ecological impact.
    If it is a negative ecological impact, the term scrap is applied.
    In SAP B1, there is no by-product term. if you want that the item is a by-product, you could possible use UDF in the item master data.
    Rgds,

  • HI,  I need to jre 1.6 update 26 on my mac system to make some aaplication work. However latest available is jre 1.6 update 29. Could you suggest how I can get jre 1.6 update 26? I tried downloading older version on java. COuldn't find it on your site.

    HI,  I need to jre 1.6 update 26 on my mac system to make some aaplication work. However latest available is jre 1.6 update 29. Could you suggest how I can get jre 1.6 update 26? I tried downloading older version on java. COuldn't find it on your site.

    What are you missing?
    I inherited this app and signing the third party jars is how it was setup, I was wondering the same thing too, why was it necessary to sign the third party jars?
    The applet runs in either JRE 1.6.0_13 or JRE 1.6.0_27 depending on the other Java apps the user uses. JRE 1.6.0_13 does not have the mixed code security (so it is like is disable), but JRE 1.6.0_27 does have the mixed code security and the applet will not launch with mixed code security enable, so we have to disable it. With all the hacking going on in the last two years, is important to improve security; so this is a must.
    Yes, I always clear up the cache.
    Any idea on how to resolve this problem?

  • Could you tell me what is the reason behind all this?

    Hi
      Zp0001, we have 510 pcs in stock, but for some reasons we can’t commit the orders that we have on the system. When we go into a xyz order 308 for example), the system commits only to February, even if we could do a partial shipment.
    Could you tell me what is the reason behind all this?

    Please look into availability check for that particular material,
    based on the availability check the system determines whether to
    confirm the sales order (if the sales order qty > inshe stock (either
    rejection/partial confirmation - depends upon the availability check),
    followed by determination of delivery date

  • HT1222 Please Help.. When I update to 7.0.6 I remark a very low battery lifetime I does not complete 2 hours.. I update to 7.1 to get rid of this problem but unforeately the problem still.. Could you please guide what to do?

    Please Help.. When I update to 7.0.6 I remark a very low battery lifetime I does not complete 2 hours.. I update to 7.1 to get rid of this problem but unforeately the problem still.. Could you please guide what to do?

    Restore as New (no backup)... then Re-Sync your Content.
    Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
    iTunes free download from www.itunes.com/download

  • Could you please tell what is encryption mechanism used in Release Management for storing any password

    Could you please tell what is encryption mechanism  used in Release Management for storing any password

    Hi  y e ll e sh,
    I am trying to involve someone to further look at your question. There might be some time delay. You can also check replies for the similar question in this
    thread. Appreciate your patience and thanks for your understanding.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • I bought Adobe Design & Web Premium CS6 from an online store. I try to install the program but it pup out said to Adobe support manager. I try to key in the serial number but always fail. Could you tell me what should I do? Thanks!

    I bought Adobe Design & Web Premium CS6 from an online store. I try to install the program but it pup out said to Adobe support manager. I try to key in the serial number but always fail. Could you tell me what should I do? Thanks!

    using Google to read reviews, I would not buy from that site Google
    added... click the google link I provided and do some reading about that site
    When you buy from another site instead of direct from Adobe you need to check first to be sure the site is an authorized reseller (such as Amazon)
    You are now going to have to get support from the place you bought if the serial number you were given by that site does not work

  • Please could you tell me what DLT/SDLT/Ultrium series drive works with Sun Fire V880 with SCSI Sun X

    Please could you tell me what DLT/SDLT/Ultrium series drive works with Sun Fire V880 with SCSI Sun X6540A?
    The question is URGENT because we need to do backup/restore of our Databases but we have not backup device...
    We want to buy it but we don't know what exactly drives we can choose for our Sun with X6540A SCSI card.

    Hello,
    the X6540A is a Dual Single-Ended Ultra/Wide SCSI (PCI) controller. The controller is only upto 40MB/sec, which might be suficient for a SDLT600 or LTO-2.
    Every Single-Ended SCSI device works with this card, <b>but</b> performance would be low when using LVD/SE devices (some LVD devices can't operate in SE mode!)
    I would suggest that you call Sun Sales.
    I guess that the <b>PCI/PCI-X Dual Ultra320 SCSI Adapter</b> (SG-XPCI2SCSI-LM320) or <b>PCI Dual Ultra3 SCSI Host Adapter (LVD)</b> (X6758A) are a better choice if attaching more recent drives.
    This is the <b> Sun Fire V880 - Full Components List</b>.
    Michael

  • Could you explaine me what is the diffternce between APO VMI  Vs  R/3 VMI ?

    Hi Experts,
    could you explaine me what is the diffternce between APO VMI  Vs  R/3 VMI ?
    Thanks
    babu

    Hi,
    VMI is Vendor managed Inventory. APO can plan for VMI scenario. In a situation, when the stock level at the end customer is known to APO , then APO can plan the requirements at the customer level.
    The aim of vendor-managed inventory (VMI) is to integrate key customers in supply chain planning. The customer regularly sends stock and sales data to the vendor, and based on that information, the vendor determines replenishment requirements for the customer
    VMI as a concept must be same in APO and R/3. But, such planning is possible in APO. I am not sure whether it can be done in R/3 system.
    Regards,
    Samir Baruah

  • I purchased the ExportPDF but I can't convert to Power Point. Could you tell me what I need in order to convert from PDF to Power Point?

    I purchased the ExportPDF but I can't convert to Power Point. Could you tell me what I need in order to convert from PDF to Power Point?

    You will need PDF Pack to convert to PowerPoint.
    Contact Customer Care - they may be able to help you to change your subscription.
    [topic moved to PDF Pack forum]

  • My Mac says i do not have sufficient permission,( though I've repaired permissions and checked that I'm an administrator of this computer) to upgrade- can you tell me what the problem is? Mac 10.5.8

    My Mac says i do not have sufficient permission,( though I've repaired permissions and checked that I'm an administrator of this computer) to upgrade- can you tell me what the problem is? Mac 10.5.8
    == This happened ==
    Every time Firefox opened
    == I attempted to upgrade from 2.0 version ==
    == User Agent ==
    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en-us) AppleWebKit/533.16 (KHTML, like Gecko) Version/5.0 Safari/533.16

    See http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X
    If you have Mac OS X 10.5 or newer then do this:
    Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
    Trash the current Firefox application to do a clean reinstall.
    Install the new version that you have downloaded.
    Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Maybe you are looking for

  • Object for interaction records, service tickets and follow-up activities

    Hi, I need business objects or Function modules(anything) that contains the data realted to interaction records, service tickets, and follow-up.Please help me by mailing to my mail [email protected]

  • AP PO Reconcilliation Summary Report

    Hi, I have some confusion in AP PO Accraul Reconcilliation Summary Report. even after write off the transactions are still showing the report. is it the usual behaviour of the report? can anybody help me in this regard. Rgds, Abdul Wasi

  • WVC54GCA wireless internet monitor, what a frustrating product, someone please help

    ok here is the problem:   I am able to see the video via network webcam. However, it is not what I bought it for. I'd like to make it WIRELESS. So I followed the setup wizard, but it says it can not  locate it on Step 2.  Why?? I can see the video vi

  • Syncing Palm Photo conduit with Treo 650

    After much troubleshooting I have finally, successfully synced my Treo but only after I disable the Photo conduit. If I try to sync with it on everything syncs fine until I get to Media and then iSync crashes. I get a window asking me if I want to se

  • "Search Function" on server?

    Is there a way to use Search Function on a server (like I search in DW local?) If not, how do people find a file in a folder of 1000s of files on the server? (like if there is a reason to not have the same files local/synced)