No Sim , Sim Failure , No service when updated to 5.0.1 (9A406)
Hi,
I am the owner of Iphone 4S and it was working fine (5.0) until i upgrade to 5.0.1(9A406).
Now I am facing alot of network issues. I need to dial like 4 to 5 times then only my call gets connected althought it shows full network coverage.
In short , it says NO SERVICE ans SIM FAILURE. I even restored the sowftware from ITUNES but i am still facing the same problem.
I am using the phone in India .
Can any one tell me how I can downgrade from 5.0.1 to 5.0 ???
Dear Prateek,
I am also phasing same problem, I brought my phone 4S (factory Unlock version) in December it was ok for 1 month after than i am same phasing issue like network drops, Sim failure etc even i have tried 3 carrier (Idea, Airtel and Aircel). I have also restore SW 4-5 times but of no use.
Do you find anyways to solve the issue or issue is still there with your phone. I
I am also using phone in india
Similar Messages
-
I have a brand new iphone 4s unlocked version from singapore and I am experiencing constant network fluctuations on my iphone , no service, call failed, invalid sim, sim failure, bars fluctuating from 5 - 3 - 2 - 1, no signal/bars searching etc... Ifeel miserable after trying out all the options changed multiple sims, tried multiple carriers, restored the phone back and have set-up as new device but the problem does not get solved... its is so frustrating that after investing on a world's most expensive phone you cannot enjoy the calling features which the phone offers which is the main thing you own the phone for.. Rest of the things are working.. The funniest part I am not able to make calls or receive calls but can access the internet.. I have tried every possible thing and really very frustrated with this iphone of mine...I hope the problem gets solved.. would anyone have any solutions to this problem.. Does it mean one should never update software as I hear that after updating to IOS.5.1 the problem has started coming and same has been with there.... Apple says its a hardware failure which is very difficult to digest as sometimes I get 5 bars and able to make and receive calls but 95% of the time I am unable to. If anyone has any solution I will be very happy if he or share can share the same. Many thanks. its so disgusting to experience this on top of this apple does not support global warranty for the phone as you need to go to the country from where you bought the phone for replacement.. Truly sad state of affairs.. very very very dissappointing.
Have a look at this it might help
http://support.apple.com/kb/TS4148 -
please help me < when update my i phone 3G < i finish update but face problem , appear me msg There is no SIM card installed in the iPhone You ar attempting to activate. Please disconnect
Sounds like your phone was hacked to use with your carrier. Updating it has relocked the phone to it's original carrier. You will not get the phone working again without a SIM from the original carrier.
-
I have Iphone 4 it was work fine in my country (bahrain) i went to UK and i change sim card to O2 and when i came back it doesn't work in my country i think because i update the carrier in Uk its my carrier now 10.0 and the others in my country is 9.0
We had the same problem, but figure out the solution.
You MUST have at least 1 song added to your ITUNE! After you add a free song, then everything else should work as normal!
Hope this helps! -
I was updating my iphone and i deleted everything now it say there is no sim in the phone, i have gone to the iphone shop and they say is is working The sim is in the phone . when i take it out and put it in another phone i can call and recieve calls
I did call apple care and they guided me through everything.. they said it was the hardware
I was given this phone last year as a present
i know, it was not new.. so it could have been on an other cell provider i am not sure if it was so at the moment that is all i can do -
i got an iphone 4 from one of my freind from uk he gifted me.when insert sim its showing no service available,i don no whether it is locked or not?but i can see the applications only thing is that the network is not showing.please suggest ?
According to Apple (http://support.apple.com/kb/ht1937) all UK carriers sell their iPhones locked, even though they also all offer unlocking. So, as mentioned, contact your friend and ask them did they get it unlocked? If not, which carrier did they get it from so you can contact that carrier and request an unlock.
-
I keep getting No Service when trying to connect my unlocked phone to a new carrier. I know the SIM card works so it is an iPhone or AT&T issue. Can anyone help me with this please?
You must complete the unlock process with the ATT SIM in the phone. Follow the directions you received with the email saying that your unlock was approved.
At the end of the process you should have gotten an message saying that your phone was succesfully unlocked. -
hi there. i have recently brought an iPhone4 off ebay and it comes up no service when i put my sim in the phone and im tryign absolutely everything. please help!!!!!
tap on settings then general then About. What does your network and carrier say?
-
I've gotten a SIM card failure message and lost service 4 times in the past half a day
I've gotten a 'SIM card failure' message and lost service 4 times in the past half a day. Turning the phone off and on fixes it temporarily. Any similar problems? What did you do?
this is definitely not the experience we want you to have with your phone wme1221. I recommend a SIM card pull. What type of phone do you have? Is the phone damaged?
KInquanaH_VZW
Follow us on Twitter @vzwsupport -
I got my iphone 6 plus unlock but when i insert a colombian sim card shows no service ?
please I need help.
i purchased an Iphone 6 plus from eBay. it is a at&t phone.
I got the cellphone unlock once i get to itunes it shows that the iphone is unlock, but when i try the colombian sim cards shows no service, i try with 3 sim cards. and nothing no service.
what can i do please help?dfmr81 wrote:
please I need help.
i purchased an Iphone 6 plus from eBay. it is a at&t phone.
I got the cellphone unlock once i get to itunes it shows that the iphone is unlock, but when i try the colombian sim cards shows no service, i try with 3 sim cards. and nothing no service.
what can i do please help?
SSo you contacted AT&T and had them unlock the phone?
AT&T is the only one suthorized to unlock your phone. -
I just did the update over my wireless and it appeared to go fine, until it finished and told me the phone had no SIM installed. It will only allow SOS calls now. backed it up and am now restoring it.
I connected to iTunes and it shows that it is my phone, but that the phone number is "n/a".
I am synched and backed up. Now restoring, which seems to want to dowenload the entire 790MB of the update.
I hope this works, otherwise I am screwed.
Does anyone have any ideas that might help me?
Thanks in advance.I had this issue too. I did an OTA update.
I tried turning off my iPhone, removed and reinserted my SIM and turning it on again a few times without success. I also inserted my wife's SIM, it was OK. When I tried with mine again, it was not. I also tried going in and out of Airplane Mode too without success.
Afte a bit of trial and error, I finally got it to work.
What I did was:
1. Turn off WIFI.
2. Turn off my iPhone.
3. Removed and reinserted my SIM.
4. Turned on my iPhone. Almost immediately I saw the "3G" indicator and after a couple of seconds, my SIM worked!
5. Turned WIFI back on.
From my issue, it seems the iOS 5.0.1 update got "confused" with the network setup.
HIH.
Andrew -
My phone displays "Network search". Current time and date. When sim sim svtavlena and when there is no.
Мой айффон постоянно пишет поиск сети, даже если достать сим карту. Дата и время тоят правильно, сброс сети я пробовал, не помогает.Hi, AlexKot.
Thank you for visiting Apple Support Communities.
It sounds like you are experiencing an issue with your iPhone searching for service. If you have not resolved this issue, I would recommend trying the troubleshooting steps in the article below.
If you see No Service or Searching in the status bar of your iPhone or iPad
http://support.apple.com/kb/ts4429
Cheers,
Jason H. -
my iphone 4s has been reporting invalid sim/sim card failure intermittently for a week. I thought it was a one/two-time thing, so had to manually eject SIM card and put back in. Today, after it happened twice in 12 hours, someone told me to reset - i thought they meant reset all settings, not network settings. while in the middle of resetting, there was an invalid SIM card again. so a few questions - which should i do first? try to manually back up from itunes (not connected to cloud - will be after tonight!), or eject SIM card? don't know if one will jeopardize the other. also, the last time i backed up was 6 days ago - have taken hundreds of pics since then - are those all lost? is there a way to essentially not reset? i thought the reset was okay because it said i'd lose no data or media. Help! thanks much!
my iphone 4s has been reporting invalid sim/sim card failure intermittently for a week. I thought it was a one/two-time thing, so had to manually eject SIM card and put back in. Today, after it happened twice in 12 hours, someone told me to reset - i thought they meant reset all settings, not network settings. while in the middle of resetting, there was an invalid SIM card again. so a few questions - which should i do first? try to manually back up from itunes (not connected to cloud - will be after tonight!), or eject SIM card? don't know if one will jeopardize the other. also, the last time i backed up was 6 days ago - have taken hundreds of pics since then - are those all lost? is there a way to essentially not reset? i thought the reset was okay because it said i'd lose no data or media. Help! thanks much!
-
Error when updating Service Request - 12.1.3
eBus 12.1.3 - DB 11.2.0.1 - RHEL 4.8
When updating a service request we receive the error as follows:
ORA-01438: value larger than specified precision allowed for this column in Package CS_ServiceRequest_PVT Procedure Update_ServiceRequest.
The notes input isn't all that long compared to ones in the past. If it is based on another field I can't identify which one it is.
I enabled a trace during the process and this was the section after the updated was attempted.
PARSE #125:c=1999,e=1131,p=0,cr=0,cu=0,mis=1,r=0,dep=1,og=1,plh=0,tim=1342466511527089
EXEC #125:c=5999,e=5829,p=0,cr=1,cu=1,mis=1,r=0,dep=1,og=1,plh=3977838810,tim=1342466511533163
ERROR #125:err=1438 tim=1342466511533218
STAT #125 id=1 cnt=0 pid=0 pos=1 obj=0 op='UPDATE CS_INCIDENTS_ALL_B (cr=0 pr=0 pw=0 time=0 us)'
STAT #125 id=2 cnt=1 pid=1 pos=1 obj=58779 op='TABLE ACCESS BY USER ROWID CS_INCIDENTS_ALL_B (cr=1 pr=0 pw=0 time=0 us cost=1 size=285 card=1)'
CLOSE #125:c=0,e=42,dep=1,type=0,tim=1342466511533719
=====================
PARSING IN CURSOR #124 len=37 dep=1 uid=175 oct=45 lid=175 tim=1342466511533847 hv=1888065881 ad='0' sqlid='aahpwzps8m6at'
ROLLBACK TO UPDATE_SERVICEREQUEST_PVT
END OF STMT
PARSE #124:c=0,e=30,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=0,plh=0,tim=1342466511533844
EXEC #124:c=1000,e=17838,p=0,cr=0,cu=4,mis=0,r=0,dep=1,og=0,plh=0,tim=1342466511551774
CLOSE #124:c=0,e=4,dep=1,type=3,tim=1342466511551833
CLOSE #122:c=0,e=4,dep=1,type=3,tim=1342466511551876
=====================
I have compiled the forms for JTF, CS, CSC
I also ran utlrp.sql to recompile invalid objects and still no luck.
No luck in metalink thus far. Where would the next logical place be to look for the cause of this error? ThanksIt appears to be attempting to update all the columns in the statement, I am not sure which ones have data vs which don't.
<****----------------------STATEMENT---------------------------------------****>
UPDATE CS_INCIDENTS_ALL_B SET INCIDENT_STATUS_ID = :B174 , INCIDENT_TYPE_ID =
:B173 , INCIDENT_URGENCY_ID = :B172 , INCIDENT_SEVERITY_ID = :B171 ,
INCIDENT_OWNER_ID = :B170 , RESOURCE_TYPE = :B169 , INVENTORY_ITEM_ID =
:B168 , CUSTOMER_ID = :B167 , ACCOUNT_ID = :B166 , CURRENT_SERIAL_NUMBER =
:B165 , EXPECTED_RESOLUTION_DATE = :B164 , ACTUAL_RESOLUTION_DATE = :B163 ,
CUSTOMER_PRODUCT_ID = :B162 , BILL_TO_SITE_USE_ID = :B161 ,
BILL_TO_CONTACT_ID = :B160 , SHIP_TO_SITE_USE_ID = :B159 ,
SHIP_TO_CONTACT_ID = :B158 , INSTALL_SITE_USE_ID = :B157 ,
INCIDENT_ATTRIBUTE_1 = :B156 , INCIDENT_ATTRIBUTE_2 = :B155 ,
INCIDENT_ATTRIBUTE_3 = :B154 , INCIDENT_ATTRIBUTE_4 = :B153 ,
INCIDENT_ATTRIBUTE_5 = :B152 , INCIDENT_ATTRIBUTE_6 = :B151 ,
INCIDENT_ATTRIBUTE_7 = :B150 , INCIDENT_ATTRIBUTE_8 = :B149 ,
INCIDENT_ATTRIBUTE_9 = :B148 , INCIDENT_ATTRIBUTE_10 = :B147 ,
INCIDENT_ATTRIBUTE_11 = :B146 , INCIDENT_ATTRIBUTE_12 = :B145 ,
INCIDENT_ATTRIBUTE_13 = :B144 , INCIDENT_ATTRIBUTE_14 = :B143 ,
INCIDENT_ATTRIBUTE_15 = :B142 , INCIDENT_CONTEXT = :B141 ,
EXTERNAL_ATTRIBUTE_1 = :B140 , EXTERNAL_ATTRIBUTE_2 = :B139 ,
EXTERNAL_ATTRIBUTE_3 = :B138 , EXTERNAL_ATTRIBUTE_4 = :B137 ,
EXTERNAL_ATTRIBUTE_5 = :B136 , EXTERNAL_ATTRIBUTE_6 = :B135 ,
EXTERNAL_ATTRIBUTE_7 = :B134 , EXTERNAL_ATTRIBUTE_8 = :B133 ,
EXTERNAL_ATTRIBUTE_9 = :B132 , EXTERNAL_ATTRIBUTE_10 = :B131 ,
EXTERNAL_ATTRIBUTE_11 = :B130 , EXTERNAL_ATTRIBUTE_12 = :B129 ,
EXTERNAL_ATTRIBUTE_13 = :B128 , EXTERNAL_ATTRIBUTE_14 = :B127 ,
EXTERNAL_ATTRIBUTE_15 = :B126 , EXTERNAL_CONTEXT = :B125 , RESOLUTION_CODE =
:B124 , PROBLEM_CODE = :B123 , ORIGINAL_ORDER_NUMBER = :B122 ,
PURCHASE_ORDER_NUM = :B121 , CLOSE_DATE = :B120 , PUBLISH_FLAG = :B119 ,
OBLIGATION_DATE = :B118 , QA_COLLECTION_ID = :B117 , CONTRACT_SERVICE_ID =
:B116 , CONTRACT_ID = :B115 , CONTRACT_NUMBER = :B114 , PROJECT_NUMBER =
:B113 , CUSTOMER_PO_NUMBER = :B112 , CUSTOMER_TICKET_NUMBER = :B111 ,
TIME_ZONE_ID = :B110 , TIME_DIFFERENCE = :B109 , PLATFORM_ID = :B108 ,
PLATFORM_VERSION = :B107 , PLATFORM_VERSION_ID = :B106 , DB_VERSION = :B105
, CP_COMPONENT_ID = :B104 , CP_COMPONENT_VERSION_ID = :B103 ,
CP_SUBCOMPONENT_ID = :B102 , CP_SUBCOMPONENT_VERSION_ID = :B101 ,
CP_REVISION_ID = :B100 , INV_ITEM_REVISION = :B99 , INV_COMPONENT_ID = :B98
, INV_COMPONENT_VERSION = :B97 , INV_SUBCOMPONENT_ID = :B96 ,
INV_SUBCOMPONENT_VERSION = :B95 , SITE_ID = :B94 , CUSTOMER_SITE_ID = :B93 ,
TERRITORY_ID = :B92 , CUST_PREF_LANG_ID = :B91 , COMM_PREF_CODE = :B90 ,
CUST_PREF_LANG_CODE = :B89 , LAST_UPDATE_CHANNEL = :B88 , TIER = :B87 ,
TIER_VERSION = :B86 , OPERATING_SYSTEM = :B85 , OPERATING_SYSTEM_VERSION =
:B84 , DATABASE = :B83 , CATEGORY_ID = :B82 , GROUP_TYPE = :B81 ,
OWNER_GROUP_ID = :B80 , GROUP_TERRITORY_ID = :B79 , OWNER_ASSIGNED_TIME =
:B78 , OWNER_ASSIGNED_FLAG = :B77 , UNASSIGNED_INDICATOR = :B76 ,
INV_PLATFORM_ORG_ID = :B75 , PRODUCT_REVISION = :B74 , COMPONENT_VERSION =
:B73 , SUBCOMPONENT_VERSION = :B72 , CATEGORY_SET_ID = :B71 ,
EXTERNAL_REFERENCE = :B70 , SYSTEM_ID = :B69 , ERROR_CODE = :B68 ,
INCIDENT_OCCURRED_DATE = :B67 , INCIDENT_RESOLVED_DATE = :B66 ,
INC_RESPONDED_BY_DATE = :B65 , INCIDENT_LOCATION_ID = :B64 ,
INCIDENT_ADDRESS = :B63 , INCIDENT_CITY = :B62 , INCIDENT_STATE = :B61 ,
INCIDENT_COUNTRY = :B60 , INCIDENT_PROVINCE = :B59 , INCIDENT_POSTAL_CODE =
:B58 , INCIDENT_COUNTY = :B57 , SR_CREATION_CHANNEL = :B56 , COVERAGE_TYPE =
:B55 , BILL_TO_ACCOUNT_ID = :B54 , SHIP_TO_ACCOUNT_ID = :B53 ,
CUSTOMER_PHONE_ID = :B52 , CUSTOMER_EMAIL_ID = :B51 ,
LAST_UPDATE_PROGRAM_CODE = :B50 , LAST_UPDATED_BY = :B49 ,
LAST_UPDATE_LOGIN = :B48 , LAST_UPDATE_DATE = :B47 , BILL_TO_PARTY_ID =
:B46 , SHIP_TO_PARTY_ID = :B45 , PROGRAM_ID = :B44 , PROGRAM_APPLICATION_ID
= :B43 , REQUEST_ID = :B42 , PROGRAM_LOGIN_ID = :B41 , BILL_TO_SITE_ID =
:B40 , SHIP_TO_SITE_ID = :B39 , STATUS_FLAG = :B38 , OBJECT_VERSION_NUMBER =
:B37 +1, INCIDENT_POINT_OF_INTEREST=:B36 , INCIDENT_CROSS_STREET=:B35 ,
INCIDENT_DIRECTION_QUALIFIER=:B34 , INCIDENT_DISTANCE_QUALIFIER=:B33 ,
INCIDENT_DISTANCE_QUAL_UOM =:B32 , INCIDENT_ADDRESS2 =:B31 ,
INCIDENT_ADDRESS3=:B30 , INCIDENT_ADDRESS4=:B29 , INCIDENT_ADDRESS_STYLE=
:B28 , INCIDENT_ADDR_LINES_PHONETIC =:B27 , INCIDENT_PO_BOX_NUMBER =:B26 ,
INCIDENT_HOUSE_NUMBER =:B25 , INCIDENT_STREET_SUFFIX =:B24 ,
INCIDENT_STREET =:B23 , INCIDENT_STREET_NUMBER =:B22 , INCIDENT_FLOOR=:B21 ,
INCIDENT_SUITE =:B20 , INCIDENT_POSTAL_PLUS4_CODE =:B19 ,
INCIDENT_POSITION =:B18 , INCIDENT_LOCATION_DIRECTIONS=:B17 ,
INCIDENT_LOCATION_DESCRIPTION =:B16 , INSTALL_SITE_ID =:B15 ,
INV_ORGANIZATION_ID= :B14 , OWNING_DEPARTMENT_ID = :B13 ,
INCIDENT_LOCATION_TYPE = :B12 , INCIDENT_LAST_MODIFIED_DATE = SYSDATE,
MAINT_ORGANIZATION_ID = :B11 , INSTRUMENT_PAYMENT_USE_ID = :B10 ,
SLA_DATE_1 = :B9 , SLA_DATE_2 = :B8 , SLA_DATE_3 = :B7 , SLA_DATE_4 = :B6 ,
SLA_DATE_5 = :B5 , SLA_DATE_6 = :B4 , SLA_DURATION_1 = :B3 , SLA_DURATION_2
= :B2
WHERE
ROWID = :B1
<****----------------------END STATEMENT---------------------------------------****>
After that statement this is what the tkprof generated reports shows
<****------------------------------------TKPROF-----------------------------------------****>
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 1 1 0
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.00 0 1 1 0
Misses in library cache during parse: 1
Misses in library cache during execute: 1
Optimizer mode: ALL_ROWS
Parsing user id: 175 (recursive depth: 1)
Rows Row Source Operation
0 UPDATE CS_INCIDENTS_ALL_B (cr=0 pr=0 pw=0 time=0 us)
1 TABLE ACCESS BY USER ROWID CS_INCIDENTS_ALL_B (cr=1 pr=0 pw=0 time=0 us cost=1 size=285 card=1)
SQL ID: aahpwzps8m6at
Plan Hash: 0
ROLLBACK TO UPDATE_SERVICEREQUEST_PVT
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.01 0 0 4 0
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.01 0 0 4 0
Misses in library cache during parse: 0
0 UPDATE CS_INCIDENTS_ALL_B (cr=0 pr=0 pw=0 time=0 us)
1 TABLE ACCESS BY USER ROWID CS_INCIDENTS_ALL_B (cr=1 pr=0 pw=0 time=0 us cost=1 size=285 card=1)
SQL ID: aahpwzps8m6at
Plan Hash: 0
ROLLBACK TO UPDATE_SERVICEREQUEST_PVT
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.01 0 0 4 0
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.01 0 0 4 0
Misses in library cache during parse: 0
Parsing user id: 175 (recursive depth: 1)
<****------------------------------------END TKPROF-----------------------------------------****> -
I got a iphone 4s using maxis malaysia but can't import sim contacts on iso 5.0 & update to iso 5.0.1 also same problem...
is apple problem or maxis problem?
Maybe you are looking for
-
How do I save a word pdf file to png file for up load onto FB
how do I save a word pdf file to png file for up load onto FB
-
Hai all, 11.2.2 on solaris 10 UPDATE MED_SECURITY_PRICES SET s.change_price = ((w.Prev/10)-(w.Last/10)) ,s.wa_price = ((w.AMT/(w.VOL*100))*1000) -- (DailyValue/DailyVolume)*1000 From MED_SECURITY_PRICES s JOIN stg_ws.DAILYSTKQUOTATIONDATA w ON MED_SE
-
Create message with KSOAP...problem?
Hello to all, me to servere one disperatamente hand�. I have created a message SOAP with KSOAP2�. How I make to obtain a string that it represents message SOAP?
-
With new computer I have had to add a USB serial converter to the hot synch cradle. I spent most of the day trying to get the new serial converter to be recognized so that a synch could be performed. It now will synch when I put the palm in the cradl
-
Tried to relocate itunes library and lost all music. Songs have exclamation point.
I tried to move my iTunes library to an external drive that did not have enough space on it. The transfer did not complete. Now I cannot play any of my music. There is an exclamation point next to each song. How do I go about finding my music files?