No sim status bar

Hi, i have iphone 4s Unlocked and it was locked with rogers before. I have unlocked it and restored to factory settings and now I'm trying to insert Koodo sim but it shows No sim status. How can i get resolve this issue?
<Personal Information Edited by Host>

Online means what though and by whom? I would call Rogers and ask them if they unlock phones online or only by an in store visit. If only in store then that might explain why you are having problems. You might even want to go into a Rogers outlet and see if they can verify if the phone is truly unlocked. Some info about unlocking a phone from Rogers.
http://www.rogers.com/web/support/wireless/unlock/733?setLanguage=en

Similar Messages

Weird message below status bar - icons move down and almost touch dock

Ever since installing 3.0 on my 3g iphone I've had a weird problem. Roughly around an hour or so after the phone is on, the icons on the page move down (about an 1/8 of an inch) and the words "Revisar ADN" appear below the status bar. A little bit later the message will go away but the icons will remain shifted down. The only way to fix it is to turn the phone off and back on again, but again, roughly an hour later it happens again.
I have restored several times but to no avail.
Some more info about the situation: I purchased and activated the phone in Guatemala (where I live) and my carrier is Claro. The words "revisar ADN" mean "check DNA" in english. The phone is not jailbroken or anything like that. Even though the carrier is Claro, the international settings are in English with the exception of the spanish language added to the keyboard. I've had the phone for about 6 months and on 2.2.1 never got this message.
Any help would be appreciated.

Thanks so much for the information and the investigation on this (I saw you posting in other forums as well). Through some trial and error I think things are working finally. Here is the story for anyone else that might suffer from the same problem.
I originally tried the SIM trick and took the SIM out, put it into another phone, added a contact, and then put the SIM back in. This unfortunately did not work. A few hours later the icons had moved again. I then noticed that the contact that I had added to the SIM was not in my iphone address book, so I imported the contacts from the SIM (Settings>Mail, Contact, Calendars>Import Sim Contact), hoping that this would fix the problem. That didn't work either. I turned the phone off and on again, and that didn't work either.
Then I began to look into the "Claro Contactos" issue, and went looking for the SIM Applications (Settings>Phone). Now, I am almost positive that when I looked here earlier that day the SIM Applications button was not there. Maybe it was, but I'm thinking that by putting the chip into another phone and then putting it back into the iphone, this "unlocked" this feature. Or maybe it was the simple act of taking it out and putting it back in. Either way it was there now. I had never heard (or turned on) Claro Contactos so I went hunting for where to turn it off. After finding it "Utilidades Claro" it popped up a message asking if I wanted to turn it on. Obviously I had not used the feature before so I couldn't turn it off like the previous post had suggested. So I did the opposite and turned it on. I then touched the button "Respaldo Contactos" to back up that one contact to this service and then touched the button "Respaldo Automatico" and told it NOT to back up automatically. After doing all of this, I turned the phone off and on again, and now everything has been fine. It's been a full day and my icons are right where they should be.
I mention the process because I'm not totally convinced that just by turning the Claro Contactos on was the issue. I think the whole process is the solution. Maybe someone else that has the same issue can try the process, but backwards and see if just switching the Claro Contactos on (or off) solves the problem.
Thanks for the help and I hope this helps whoever else might have the same problem.

Is there a complete list of the status bar icons somewhere?

I just received a Flame phone and have an icon in the status bar that I can't decipher: a "2" followed by what I think is a SIM card graphic, followed by a "!" - I have a SIM card in slot #1 but I am wondering if there is a problem with it. I checked the help pages and I don't see a topic that describes the different icons. Please let me know if I need to fix something. Thanks.

It's a bug. Means that a second Sim is not installed, but really it should not show at all.

Status Bar message No Network

I bought my original iphone right after it became available. I live in an area which does not have AT&T coverage. I used my business address (which is in the AT&T network) to obtain my AT&T account and activate my phone. I have been able to make calls and use all other features successfully until just recently. Now I am getting a message on the status bar that indicates there is "no network". An "E" used to appear in the status bar when I used my phone from home. Does anyone know how much usage in a non-network AT&T will allow before they request that you unsubscribe from their wireless service?? I love my iphone so I am hoping this will not happen. I did talk to an AT&T customer service rep and was advised to not worry about the "no network" message. And she thought I would be ok. She wasn't sure what the limitations were regarding other network usage. I remember when I signed up for the AT&T service reading something about being penalized for not using the phone in an AT&T coverage area. Anyone?

This is something you'd have to discuss with ATT. My understanding is they have the option of terminating all of your service if they deem you spend too much time roaming.
Some troubleshooting you can try:
1. Reset (hold the sleep/wake & home button until the Apple logo appears)
2. Reset network settings in the Settings options
3. Request a new SIM from ATT
4. Restore in iTunes

Status Bar Issue

I have iChat, Bluetooth, Timemachine, VPN, Airport, and the battery status indicator all showing in the status bar, but if I want to change something, like set my status in iChat, all of the options in the drop down from the status bar are greyed out.
I have translucent menu bar turned off, have tried both ways.
Has anyone else seen this?
Macbook 2.2Ghz, 2GB RAM, 10.5.2.

Hello cbf021!
I'm sorry you're having these issues after the update! The notification bar is important to me as well, so let's try some troubleshooting. For starters, please remove the SIM card and the battery from the device for about a minute. Then, reattach and power on/retest.
If still having an issue, you may want to try a master reset of the device. This can often resolve issues after a software update. Here are the steps for you: http://vz.to/1tXwfyH
Keep me posted!
ChristinaB_VZW
VZW Support
Follow us on Twitter @VZWSupport

Stopping or Removing Status Bar Icon (Android)

I use my phone for many things and BT SmartTalk is a small part/aspect. And with limited screen space, I definately can't justofy another icon in the status bar and the SmartTalk App running the entire time. I need to run t when I want then exit.
Using Settings > Apps > Force Exit after every occasional SmartTalk call is just stupid.
So, do BT think they are the only think on a smartphne or how to I get the app to exit and get rid of the icon
(I have already switched the default calling back to the phone as SmartTalk is just an occasional thing).
Interestingly, when I was doing a Google search for the answer, there were quite a few user reviews where loads of people had been saying about this daft icon - so I am far from alone in my wish to get rid of it and get the app to exit and stop using system resources).
Many thanks

AllanQuatermain wrote:
I close the app manually as well. Ive left it running a number of times and it does close itself. Whilst left running it sometimes asks for feedback on call quality.
I wonder if the app sends any other data whilst it is still running after use?
Don't know, but I hope not - I wonder if there anything else when it is in use.
BT list this:
PermissionsThis application has access to the following:
Services that cost you moneydirectly call phone numbers
Allows the app to call phone numbers without your intervention. This may result in unexpected charges or calls. Note that this doesn't allow the app to call emergency numbers. Malicious apps may cost you money by making calls without your confirmation.
send SMS messages
Allows the app to send SMS messages. This may result in unexpected charges. Malicious apps may cost you money by sending messages without your confirmation.
Hardware controlschange your audio settings
Allows the app to modify global audio settings such as volume and which speaker is used for output.
Your messagesread your text messages (SMS or MMS)
Allows the app to read SMS messages stored on your tablet or SIM card. This allows the app to read all SMS messages, regardless of content or confidentiality. Allows the app to read SMS messages stored on your phone or SIM card. This allows the app to read all SMS messages, regardless of content or confidentiality.
receive text messages (SMS)
Allows the app to receive and process SMS messages. This means the app could monitor or delete messages sent to your device without showing them to you.
Network communicationfull network access
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
Your personal informationread your contacts
Allows the app to read data about your contacts stored on your tablet, including the frequency with which you've called, emailed or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge. Allows the app to read data about your contacts stored on your phone, including the frequency with which you've called, emailed or communicated in other ways with specific individuals. This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.
read sensitive log data
Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the tablet, potentially including personal or private information. Allows the app to read from the system's various log files. This allows it to discover general information about what you are doing with the phone, potentially including personal or private information.
Phone callsread phone status and identity
Allows the app to access the phone features of the device. This permission allows the app to determine the phone number and device IDs, whether a call is active and the remote number connected by a call.
reroute outgoing calls
Allows the app to process outgoing calls and change the number to be dialled. This permission allows the app to monitor, redirect or prevent outgoing calls.
Storagemodify or delete the contents of your USB storage modify or delete the contents of your SD card
Allows the app to write to the USB storage. Allows the app to write to the SD card.
System toolsprevent tablet from sleeping prevent phone from sleeping
Allows the app to prevent the tablet from going to sleep. Allows the app to prevent the phone from going to sleep.
Hardware controlscontrol vibration
Allows the app to control the vibrator.
Network communicationview network connections
Allows the app to view information about network connections such as which networks exist and are connected.
view Wi-Fi connections
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
Your personal informationretrieve system internal status
Allows the app to retrieve the internal state of the system. Malicious apps may retrieve a wide variety of private and secure information that they should never normally need.
System toolsrun at startup
Allows the app to start itself as soon as the system has finished booting. This can make it take longer to start the tablet and allow the app to slow down the overall tablet by always running. Allows the app to start itself as soon as the system has finished booting. This can make it take longer to start the phone and allow the app to slow down the overall phone by always running.
Defaultdirectly call any phone numbers
Allows the app to call any phone number, including emergency numbers, without your intervention. Malicious apps may place unnecessary and illegal calls to emergency services.
test access to protected storage test access to protected storage
Allows the app to test a permission for USB storage that will be available on future devices. Allows the app to test a permission for the SD card that will be available on future devices.
read call log
Allows the app to read your tablet's call log, including data about incoming and outgoing calls. This permission allows apps to save your call log data, and malicious apps may share call log data without your knowledge. Allows the app to read your phone's call log, including data about incoming and outgoing calls. This permission allows apps to save your call log data, and malicious apps may share call log data without your knowledge.
-+-No longer a forum member-+-

Unidentified icon in status bar [Flame FFOS2.0]

I have been using a Flame updated with the official release of FFOS 2.0 for some days.
It happened twice that, for no apparent reason, an icon I cannot identify appears in the status bar. It is similar to the incoming call icon, but the arrow is bent like the reply icon, and a little '1' is there too (I assume it may refer to the first of my two SIMs). I cannot find this icon anywhere (see https://www.mozilla.org/en-US/styleguide/products/firefox-os/ for reference). When it appears, nothing peculiar seems to be happening. In particular, there are no calls going on.
I wonder what is the meaning of this icon, and if there is a reason why I see it.

Solved the problem: I just had to go on Settings > Call Settings ( > Sim 1 ) and wait a few seconds for data to be collected from the network, and the mysterious icon disappeared. No further action were required.
I suspect the original problem was originateb by doing the same operation (going in Call Settings) and exiting without waiting for data to be collected.
Yesterday (when the mysterious icon was still in place) I noticed various problems with the network: I was not receiving incoming calls, and at times the first SIM was marked as missing.
I guess there should be a bug here somewhere…

Samsung s4 status bar issue

After upgrade tp kit kat I cannot get the status bar to drop down when I swipe it. Cannot see the notifications

Hello cbf021!
I'm sorry you're having these issues after the update! The notification bar is important to me as well, so let's try some troubleshooting. For starters, please remove the SIM card and the battery from the device for about a minute. Then, reattach and power on/retest.
If still having an issue, you may want to try a master reset of the device. This can often resolve issues after a software update. Here are the steps for you: http://vz.to/1tXwfyH
Keep me posted!
ChristinaB_VZW
VZW Support
Follow us on Twitter @VZWSupport

Z2 Status bar not pulling down

Hi everyone, hoping someone can help.
As the subject says - the status/notification bar (or whatever its called) is not 'pulling down'. I've switched phone off and on a few times. Pressed the little red button next to sim card slot....nothing is working.
Any ideas/solutions appreciated.
Many thanks

I have the same probleme with my new xperia z2 I ve just bought it 5 days ago and the notification /status bar isnot sliding down I even reinstalled the software using sus but nothing helped. this is the worst phone I ve evwer seen in just 5 days I have experienced water inside the camera lens beacuse of the gaps and ridiculous heat issue in each task and the camera really sucked i cant do anything beacuse of heating really disappointed from sony I had xperia p and it was much better than this s**t.excuse me for my manners but I am really mad.

White screen after boot, only status bar visible

A few days ago, I had a message on my HP Veer 4G that a restart was required. I'm assuming something had been updated. After the reboot, my phone booted to a white screen with only the status bar at the top being visible. I've tried the triple toggle and the Funtion+Sym+R methods of restarting the phone, but the same thing happens every time the phone reboots. At first the SIM had a PIN set, so the status bar just said SOS only - SIM Lock. I removed the PIN with another phone, then the status bar showed the phone had registered with the AT&T network, but still the rest of the screen was white, so I couldn't do anything with it.
With the white screen, the gesture area would still respond to swipes back and forth across it, and the white screen would show response to wherever I would touch on the screen.
I don't know what I did, but by pressing a bunch of keys as the phone was rebooting, I got the option to reboot or erase entire phone contents. I chose to erase the phone and finally got to set up the phone from scratch. Can anyone explain what just happened?
Post relates to: HP Veer p160una (AT&T)

Hello!
This usually means some software on the phone went catastrophicly wrong thus the need of partial erase. Could you send me a private message of your palm profile email address? Have you installed anything to the phone outside our app catalog? Keep me posted.

How do I turn off and on the icon size slider bar at the lower right status bar of a folder window.

I have been trying for days to help a friend with a new iMac to turn on the icon size slider bar that on my iMac appears at the bottom of ever folder when it is open when in the "view" > "icon" mode. I cannot find anything that discusses this slider bar. I can turn this status bar off and on on both my machine and my friends machine, but I cannot turn off or on the slider on either machine.

This did not help. I am a Mac User since 1984 and generally I am never stymied buy the Mac OS, but this one has me. I can open and close the lower status bar, as you described, and that works fine for me because I have the icon slider bar already there and it works fine; however when I open the lower status bar on my friends machine there is no icon size slider bar, and I can't seem to find out how to get it there, as it is on my machine or at all. The icon size can be controlled from the View menu, but as a photographer, it is really handy to have it at the bottom of the folder window. Thanks for trying.

The status bar is pushed up at about 3/4 of the screen, so I can view onlu firefox at about 1/4, good thing there is a scroll bar, but below the status bar is white display? can u please help me, I want to drag down the status bar so I can have a full vi

The status bar is pushed up at about 3/4 of the screen, so I can view only Firefox at about 1/4, good thing there is a scroll bar, but below the status bar is white display? can u please help me, I want to drag down the status bar so I can have a full view
== This happened ==
Every time Firefox opened

Your code is absolutely unreadable - even if someone was willing to
help, it's simply impossible. I do give you a few tips, though: If you
understand your code (i.e. if it really is YOUR code), you should be
able to realize that your minimum and maximum never get set (thus they
are both 0) and your exam 3 is set with the wrong value. SEE where
those should get set and figure out why they're not. Chances are you
are doing something to them that makes one 'if' fail or you just
erroneously assign a wrong variable!

How can I create a status bar at the bottom of a window ?

I would like to create a status bar at the bottom of my main window similiar to "Internet explorer" has. I thought of using a tool bar but I can't see how to keep it positioned at the bottom of the window when the window is resizable. Any other ideas on how to do this the bar only needs to contain a small amout of text and maybe an icon or two.

CVI doesn't have a status bar control on UI element like the one available in Visual Studio++. The best way to replicate this is most like through a string control that is resized and positioned to remain at the bottom of the window and colored to look appropriately. I have also seen the combination of a decoration and a text message used.
Best Regards,
Chris Matthews
Measurement Studio Support Manager

How can I implement a status bar at the bottom of a resizable application?

Hello all,
I am a JavaFx newbie and I am implementing an application (a Sokoban game), with a menu at the top of the frame and a gaming area covering the rest of the frame. To support the game, I have to load images at certain positions in the gaming area.
The game also includes a level editor with another menubar and where images are set to other positions.
I implemented this in another view, swiching from the game mode to the level editor mode and vice versa is just done by setting the other view visible. Up to now this works, here the important statements building these details:
Group root = new Group();
gameView = new Group(); // for gaming mode
le_view = new Group()   // for level editor mode
MenuBar gameMenubar = new MenuBar();
Menu menuGame = new Menu(bundle.getString("MenuGame"));
... building the menu items and menues ...
gameView.getChildren().add(gameMenubar);
ImageView buildingView[][] = new ImageView[22][22];
for (nCol = 0; nCol < 22; nCol++) {
    for (nRow = 0; nRow < 22; nRow++) {
        buildingView[nCol][nRow] = new ImageView();
        buildingView[nCol][nRow].setX(nCol * 26 + 5);
        buildingView[nCol][nRow].setY(nRow * 26 + 40);
        gameView.getChildren().add(buildingView[nCol][nRow]);
gameView.setVisible(true);
root.getChildren().add(gameView);
... same stuff to build the le_view ...
le_View.setVisible(false);
root.getChildren().add(le_View);
Scene scene = new Scene(root, 800, 600, Color.CORNSILK); Now I want to introduce a status bar at the bottom of the frame, which of course has to follow the bottom of the frame, if it is resized. And of course the menu and the status bar should not grow vertically, if the height of the frame is increased.
The implementation seems to be easy with StackPane for the frame and one BorderPane for each mode.
For the first step I only tried implementing the game mode with only one BorderPane (just setting the menu, the gaming area and the status bar each into a HBox and setting these three HBoxes at the top, into the center and at the bottom). I also tried this via GridPane and via VBox; I always get any erroneous behaviour:
Either the menubar is visible, but the menus do not pop up the menu items, or the anchor point of the menu and of gaming area are set 100 pixels left of the left frame border and move into the frame when the frame width is increased, or the menu is set 20 pixels below the top of the frame, or HBox with the menu grows when the frame height is increased, so that the anchor point of the gaming area moves down.
Can you describe me a correct construction of such a frame? Thanks in advance.
Best regards
Gerhard

Hello Gerhard,
Glad the code helped, thanks for a fun layout exercise.
For the draft code I just pulled an icon off the internet over a http connection.
If you haven't done so already place any icons and graphics you need local to your project, so that resource lookups like:
Image img = new Image("http://www.julepstudios.com/images/close-icon.png");become
Image img = new Image("close-icon.png");then performance may improve.
Another possible reason for your performance problem could be that when you use a vbox, the vbox content can overflow the area of the borderpane center and might be sitting on top of the menu pane, making you unable to click the menu (which is what happens to me when I try that with the draft program with the vbox wrapping mod, then resize the scene to make it smaller). This was a trick which caught me and the reason that I used a Group originally rather than a vbox. I found a vbox still works but you need to tweak things a bit. The trick I saw was that the order in which you add stuff to the borderpane is important. The borderpane acts like a stack where the last thing added floats over the top of everything else if you size the scene small enough. For your project you want the menu on top always, so it always needs to be the last thing added to the borderpane, but when you swap in the level pane for the game pane, then back out again, the game pane can end up on top of the menu which makes the menu seem like you can't click it (only when the scene is sized small enough). It was quite a subtle bug which took me a little while to work out what was happening. For me the solution was to add just one vbox to the center of the border, and then swap the game pane and the level editor in and out of the vbox, that way the center of the layout always stayed behind the menu bar and the status bar.
I added some revisions to reflect the comments above and placed some comments in the code to note what was changed and why.
public class SampleGameLayoutRevised extends Application {
public static void main(String[] args) { Application.launch(args); }
public void start(Stage stage) throws Exception {
    final BorderPane gameLayout = new BorderPane();
    final Group gameView = new Group();
    final MenuBar gameMenubar = new MenuBar();
    final Menu gameMenu = new Menu("Mode");
    final VBox centerView = new VBox();
    centerView.setStyle("-fx-background-color: darkgreen"); // we set a background color on the center view to check if it overwrites the game menu.
    MenuItem playGameMenu = new MenuItem("Play Game");
    MenuItem levelEditMenu = new MenuItem("Edit Levels");
    gameMenu.getItems().add(playGameMenu);
    gameMenu.getItems().add(levelEditMenu);
    gameMenubar.getMenus().add(gameMenu);
    final StackPane levelEditView = new StackPane();
    levelEditView.getChildren().add(new Text("Level Editor"));
    ImageView buildingView[][] = new ImageView[22][22];
    Image img = new Image("http://www.julepstudios.com/images/close-icon.png"); // use of http here is just for example, instead use an image resource from your project files.
    for (int nCol = 0; nCol < 22; nCol++) {
      for (int nRow = 0; nRow < 22; nRow++) {
        ImageView imgView = new ImageView(img);
        imgView.setScaleX(0.5);
        imgView.setScaleY(0.5);
        buildingView[nCol][nRow] = imgView;
        buildingView[nCol][nRow].setX(nCol * 20 + 5);
        buildingView[nCol][nRow].setY(nRow * 20 + 40);
        gameView.getChildren().add(buildingView[nCol][nRow]);
    final VBox statusBar = new VBox();
    final Text statusText = new Text("Playing Game");
    statusBar.getChildren().add(statusText);
    statusBar.setStyle("-fx-background-color: cornsilk"); // we set a background color on the status bar,
                                                          // because we can't rely on the scene background color
                                                          // because, if the scene is sized small, the status bar will start to overlay the game view
                                                          // and if we don't explicitly set the statusBar background the center view will start
                                                          // to bleed through the transparent background of the statusBar.
    gameLayout.setCenter(centerView); // we add the centerview first and we never change it, instead we put it's changeable contents in a vbox and change out the vbox content.
    gameLayout.setBottom(statusBar);
    gameLayout.setTop(gameMenubar);   // note the game layout is the last thing added to the borderpane so it will always stay on top if the border pane is resized.
    playGameMenu.setOnAction(new EventHandler<ActionEvent>() {
      public void handle(ActionEvent event) {
        centerView.getChildren().clear(); // here we perform a centerview vbox content swap.
        centerView.getChildren().add(gameView);
        statusText.setText("Playing Game");
    levelEditMenu.setOnAction(new EventHandler<ActionEvent>() {
      public void handle(ActionEvent event) {
        centerView.getChildren().clear(); // here we perform a centerview vbox content swap.
        centerView.getChildren().add(levelEditView);
        statusText.setText("Editing Level");
    playGameMenu.fire();
    Scene scene = new Scene(gameLayout, 800, 600, Color.CORNSILK);
    stage.setScene(scene);
    stage.show();
}Other than that I am not sure of a reason for the slowdown you are seeing. In my experience JavaFX has been quick and responsive for the tasks I have been using it for. Admittedly, I just use if for a bunch of small trial projects, but I've never seen it unresponsive for a minute.
- John

Error message in a BADI getting displayed in a popup instead of status bar

Hello All,
I have implemented a BADI in ECC6 to prevent the change of formula in ERP from transaction O3I8.
The BADI gets called on clicking 'Save' from transaction o3I8.
Within the BADI i am giving an error message using the following command:
Message e000(ZABC) .
However , the message gets displayed in a pop up instead of the status bar .
The same is for information and warning messages.
Any suggestions on how to display them in the status bar ?
TIA
Regards,
Vartika

Hi Brad,
The checkbox to display messages in pop-up is already switched off.
Still themessages are getting displayed in pop-up.
Regards,
Vartika

No sim status bar

Similar Messages

Maybe you are looking for