No Single batch split item created in delivery during picking

Hello,
When there is only one batch split item, SD_DELIVERY_UPDATE_PICKING is not creating batch split item (90001) if delivery quantity is equal or less than picking quantity...I didi search for SAP Note (1360407) and found one which is applicable only to P3A Component.
Instead of batch split it updates at item level itself. Now if again i post an IDOC with 2 batch split, then it adds both picking quantity and update the same line item itself.
This is much worse. Any one faced this issue before???
Thanks to update me
Regards
Hari

When the batch is the same, regardless of the number of times the same batch is picked, the update to the delivery will be to the same header line item. The batch split (delivery line split with parent and child line items) will occur only when there are multiple batches picked against the same header line item. Since this behavior is standard SAP I'm doubtful that this can be changed via an exit or BADI (I couldn't find one to influcence this).

Similar Messages

Quality certficates for batch split items in delivery

Hi Masters
How to make the output determination for outgoing quality certificates to select the output type LQCB
for batch split items in Delivery.
What is the routine to be selected in the output determination to map this scenario?
Regards
Mohan

Hi Masters
My problem is When i create a delivery for the items with batch split, the output type LQCB is not determined ie., not automatically get assigned in the delivery item.Hence the delivery items are not listed while executing T code QC20/
What am I missing?
-mohan

Creating Batch SPLIT items via WS_DELIVERY_UPDATE

HI,
I try to create batch split items into an inbound delivery. It works fine, but now we decided to have only one split item per material/batch.
Now I've got the problem, that calling the ws_delivery_update from same screen several times, it works only every second call. Means:
first call creates split item
second call runs on error
third call increases the split item amount, as it should do.
fourth call runs on error and so on...
I guess that I have problems with buffers, initialization or something like that.
Any ideas are welcome
Best regards
Patrick

Hi Patrick,
a very quick question. I was mining for info to get the batchsplit items inserted into an Outbound delivery thru the FM WS_DELI... sometime ago. Out of doubt and tight schedule I had to opt for Batch (direct input) which is not that elegant and I would like to know how you realised the batch split. A piece of code would be just what I am looking for.
thanks a lot in advance.
ZAM

Urgent ! delivery items and its batch split items

Exports:
How to find relationship between delivery items and its batch split items. Thanks alot.

Talk to functional guy -
List of tables which contains CHSPL
VBAP
LIPS
KNVV
KNMT

Inserting Batch Split Items in Delivery

Hi Folks,
a very quick question. I was mining for info to get the batchsplit items inserted into an Outbound delivery thru the FM WS_DELIVERY_UPDATE sometime ago. Out of doubt and tight schedule I had to opt for BDC which is not that elegant and I would like to know if anyone of you gurus has managed to insert batch split items for a normal item in a delivery. A sample piece of code would be just what I am looking for, suggestions are invited
thanks a lot in advance.
ZAM

Hi ZAMUser,
I have played with batch-split Items, this is a little part of the code. In this code I try to update quantity of the delivery. Maybe that will help you
Regards
Frédéric
(comments are in french, and I play with special messages and text)
*   Livraison
    refresh wlt_btc.
    move : 'SAPMV50A'    to wlt_btc-program ,
           '4004'        to wlt_btc-dynpro ,
           'X'           to wlt_btc-dynbegin.
    append wlt_btc.
    clear wlt_btc.
    move : 'BDC_OKCODE' to wlt_btc-fnam ,
           '/00'         to wlt_btc-fval .
    append wlt_btc.
    clear wlt_btc.
    move : 'LIKP-VBELN'    to wlt_btc-fnam ,
           wlt_badge-vbeln to wlt_btc-fval .
    append wlt_btc.
    clear wlt_btc.
*   PoPo.
    move : 'SAPMV50A'    to wlt_btc-program ,
           '1000'        to wlt_btc-dynpro ,
           'X'           to wlt_btc-dynbegin.
    append wlt_btc.
    clear wlt_btc.
    move : 'BDC_OKCODE' to wlt_btc-fnam ,
           '=POPO_T'     to wlt_btc-fval .
    append wlt_btc.
    clear wlt_btc.
*   Poste.
    if wlt_badge-uecha eq '00000000'.
      move wlt_badge-posnr to wlv_poste.
    else.
      move wlt_badge-uecha to wlv_poste.
    endif.
    move : 'SAPMV50A'    to wlt_btc-program ,
           '0111'        to wlt_btc-dynpro ,
           'X'           to wlt_btc-dynbegin.
    append wlt_btc.
    clear wlt_btc.
    move : 'BDC_OKCODE' to wlt_btc-fnam ,
           '=WEIT'       to wlt_btc-fval .
    append wlt_btc.
    clear wlt_btc.
    move : 'RV50A-POSNR' to wlt_btc-fnam ,
           wlv_poste     to wlt_btc-fval .
    append wlt_btc.
    clear wlt_btc.
*   Marque le poste
    move : 'SAPMV50A'    to wlt_btc-program ,
           '1000'        to wlt_btc-dynpro ,
           'X'           to wlt_btc-dynbegin.
    append wlt_btc.
    clear wlt_btc.
    if wlt_badge-uecha ne '00000000'.
      move : 'BDC_OKCODE' to wlt_btc-fnam ,
             '=CHSP_T'     to wlt_btc-fval .
    else.
      move : 'BDC_OKCODE' to wlt_btc-fnam ,
             '=IDET_T'     to wlt_btc-fval .
    endif.
    append wlt_btc.
    clear wlt_btc.
    move : 'BDC_CURSOR'     to wlt_btc-fnam ,
           'LIPS-POSNR(01)' to wlt_btc-fval .
    append wlt_btc.
    clear wlt_btc.
    if wlt_badge-uecha ne '00000000'.
*     Recherche le sous poste.
      move : 'SAPMV50A'    to wlt_btc-program ,
             '3000'        to wlt_btc-dynpro ,
             'X'           to wlt_btc-dynbegin.
      append wlt_btc.
      clear wlt_btc.
      move : 'BDC_OKCODE' to wlt_btc-fnam ,
             '=POPO_T'     to wlt_btc-fval .
      append wlt_btc.
      clear wlt_btc.
*     Sous Poste.
      move : 'SAPMV50A'    to wlt_btc-program ,
             '0111'        to wlt_btc-dynpro ,
             'X'           to wlt_btc-dynbegin.
      append wlt_btc.
      clear wlt_btc.
      move : 'BDC_OKCODE' to wlt_btc-fnam ,
             '=WEIT'       to wlt_btc-fval .
      append wlt_btc.
      clear wlt_btc.
      move : 'RV50A-POSNR'   to wlt_btc-fnam ,
             wlt_badge-posnr to wlt_btc-fval .
      append wlt_btc.
      clear wlt_btc.
*     Marque le sous poste
      move : 'SAPMV50A'    to wlt_btc-program ,
             '3000'        to wlt_btc-dynpro ,
             'X'           to wlt_btc-dynbegin.
      append wlt_btc.
      clear wlt_btc.
      move : 'BDC_OKCODE' to wlt_btc-fnam ,
             '=CDET_T'     to wlt_btc-fval .
      append wlt_btc.
      clear wlt_btc.
      move : 'BDC_CURSOR'     to wlt_btc-fnam ,
             'LIPS-POSNR(01)' to wlt_btc-fval .
      append wlt_btc.
      clear wlt_btc.
    endif.
*   Onglet Qtt
    move : 'SAPMV50A'    to wlt_btc-program ,
           '3000'        to wlt_btc-dynpro ,
           'X'           to wlt_btc-dynbegin.
    append wlt_btc.
    clear wlt_btc.
    if wlt_badge-uecha ne '00000000'.
      move : 'BDC_OKCODE' to wlt_btc-fnam ,
             '=T04'       to wlt_btc-fval .
    else.
      move : 'BDC_OKCODE' to wlt_btc-fnam ,
             '=T05'       to wlt_btc-fval .
    endif.
    append wlt_btc.
    clear wlt_btc.
*   Mise à jour Qtt livrée
    move : 'SAPMV50A'    to wlt_btc-program ,
           '3000'        to wlt_btc-dynpro ,
           'X'           to wlt_btc-dynbegin.
    append wlt_btc.
    clear wlt_btc.
    move : 'BDC_OKCODE' to wlt_btc-fnam ,
           '=SICH_T'     to wlt_btc-fval .
    append wlt_btc.
    clear wlt_btc.
    move : 'LIPS-LFIMG' to wlt_btc-fnam ,
           wlv_poids     to wlt_btc-fval .
    append wlt_btc.
    clear wlt_btc.
*   Appels du call transaction.
    call transaction 'VL02N' using wlt_btc
                              mode 'N'
                              update 'S'
                              messages into wlt_error.
    sort wlt_error by msgid msgnr.
*   Binary search
    read table wlt_error
         with key msgid = 'ZTPL'
                  msgnr = '011'
         binary search.
    if sy-subrc eq space.
      message i011(ztpl) with wlt_error-msgv1 wlt_error-msgv2.
    else.
      read table wlt_error
           with key msgid = 'ZTPL'
                    msgnr = '010'
           binary search.
      if sy-subrc eq space.
        message i010(ztpl) with wlt_error-msgv1 wlt_error-msgv2.
      else.
*       Pas de binary search pour la recherche d'erreur
        read table wlt_error
             transporting no fields
             with key msgtyp = 'E'.
        if sy-subrc eq space.
          message i398(00) with text-e01.
        else.
*         Mise à jours des masses dans les textes au niveau des postes
*         de livraison.
          concatenate wlt_lips-vbeln
                      wlt_lips-posnr
                      into wlv_tdname.
*         Masse net.
          move : 'VBBP'     to wls_thead-tdobject ,
                 wlv_tdname to wls_thead-tdname ,
                 'YP09'     to wls_thead-tdid ,
                 wlv_langu to wls_thead-tdspras.
          move : wlt_bascule-poids to wls_tdline-tdline ,
                 '*'               to wls_tdline-tdformat .
          refresh wlt_tdline.
          append wls_tdline to wlt_tdline.
          call function 'SAVE_TEXT'
            exporting
              header                = wls_thead
              savemode_direct       = 'X'
            tables
              lines                 = wlt_tdline
            exceptions
              id                    = 1
              language              = 2
              name                  = 3
              object                = 4
              others                = 5.
*         Masse brut.
          move : 'YP07'            to wls_thead-tdid ,
                 wlt_bascule-poid2 to wls_tdline-tdline ,
                 '*'               to wls_tdline-tdformat.
          refresh wlt_tdline.
          append wls_tdline to wlt_tdline.
          call function 'SAVE_TEXT'
            exporting
              header                = wls_thead
              savemode_direct       = 'X'
            tables
              lines                 = wlt_tdline
            exceptions
              id                    = 1
              language              = 2
              name                  = 3
              object                = 4
              others                = 5.
*         Tare.
          move : 'YP08'            to wls_thead-tdid ,
                 wlt_bascule-poid3 to wls_tdline-tdline ,
                 '*'               to wls_tdline-tdformat.
          refresh wlt_tdline.
          append wls_tdline to wlt_tdline.
          call function 'SAVE_TEXT'
            exporting
              header                = wls_thead
              savemode_direct       = 'X'
            tables
              lines                 = wlt_tdline
            exceptions
              id                    = 1
              language              = 2
              name                  = 3
              object                = 4
              others                = 5.
        endif.
      endif.
    endif.

Constrain delivery quantity "0" in Batch Split item of DN

Hi all,
I have been done a "0" constrain on delivery quantity in items of DN which means there will never be "0" delivery quantity in item of DN. But in Batch Split situation , user can still make the delivery quantity "0" in batch split item and save the DN.
So, can anyone tell me how to constrain the "0" in batch split situation.

Hi..
In 0VLP Check configuration related to BOM..
Test the possibility...
Reward if u finds this as USEFUL...
Regds
MM

Update picking quantity in delivery for batch split items

Hi,
I'm trying to use the function module WS_DELIVERY_UPDATE to update the existing deliveries. I'm able to do batch split for the items in delivery using the same FM. I have also requirement to delete these items (batch split items).
To delete these items first we have to make quantities to zero. So I'm able to make delivery quantity of these items to zero but not picking quantity.
If we do not make picking quantity also zero it will not allow to delete these items
and gives an error message saying "item is already made available for transfer order".
Could some one let me kow how to make picking quantity also zero for batch spit items using FM.
Thanks

Hi Vikram
To nullify the Picking Quantity, we can use FM: <b>SD_DELIVERY_UPDATE_PICKING</b>.
Parameters to be passed:
VBKOK_WA
-- VBELN_VL - Delivery Number
-- VBELN - Sales Document Number
SYNCHRON - 'X'
VBPOK_TAB
-- VBELN_VL - Delivery Number
-- POSNR_VL - Delivery Item Number
-- VBELN -- Sales Document Number
-- POSNN -- Sales Document Item Number
-- MATNR -- Material Number
-- LFIMG -- '0.000'.
Have tried this in both cases whereby we have partial picking done and full picking done and worked for both cases.
Please try on your end too...
Hope this helps.
Regards
Eswar

Update picking quantity in delivery (Batch split items) using function modu

Hi All,
I need to update a picking quantity with zero value in delivery for batch split items (Item numbers start with 900001. etc).I'm trying to use WS_DELIVERY_UPDATE
and SD_DELIVERY_UPDATE_PICKING. I'm passing parameter VBKOK-KOMUE , and all other details, but it is not updating.
I'm able to update delivery quantity of same item with zero value but not picking quantity.
Could you please let me know how to achive this.
Regards
Vikram

I think the number 900001is mean batch split line item.
example:
In Deivery Note:
Item 10
     Batch 900001
     Batch 900002
Item 20
     Batch 900003
     Batch 900004
That right,

Batch split items in invoice

Hello Friends,
I have a delivery item with batch split and which consists of 5 batch split items. If i create an invoice from delivery , invoice is whowing all 5 batch split items as 5 line items in the invlice. User wants only the one item with full quantity should show in invoice.
Please guide me how to do this.
Thanks,
Ashok S

fyi,
-While Creating Invoice for Batch split material, System copies all the batch items including main item, where as, system should copy/combine all batch split items into Main item, batch split items should not be shown in different line items in Invoice.- ?
In copy control from the delivery type to billing type VTFL, for the item category maintain billing quantity as G. This will ensure that the batches are clubbed into single line item.
In Item Category of the Billing, goto VOV7 u2013 maintain billing relevance as u201CMu201D.
- Batch Management in STO, after creating delivery via VL10F, wrt: STO order, automatic batch determination is not happening for the batch managed material. But for the same Material, from SD it is working fine. System displays message as u201C No Batch search procedure assigned to the order typeu201D
In V/C5, batch has to assigned to the determination procedure in combination of Sales Org / Dist Channel / Division / Order type u2013 Search Procedure / Check batch indicator.
*Sales area should be taken from STO-ME22n, Shipping tab at item level.
*Order type should be, default Order type from the specific Delivery type eg:NL-
Item Category for STO main item : NLN / batch item: ULN, both has to be marked for automatic batch determination indicator in IMG-LG-Batch Mgmt u2013 Batch detu2019n & Batch check u2013 Automatic batch detu2019n in SD u2013 Activate Auto. Batch detu2019n for Delivery Item Catu2019s
After following above procedure, system displays error message as u201C Item Category is not maintainedu201D
-Tcode:0184-Delivery item cat detu2019n
Maintain entries as u201CDel type/Item cat group / Item Usage / High. Item Cat- Default, Item catu201D
Eg: NL u2013 NORM u2013 CHSP -= ULN
CHSP u2013 Batch split item.
NOTE: Copy Controls from Delivery u2013 billing at item level u2013 ULN should not be maintained.

Batch Split Item

What is the significance of Batch Split Item and how's it linked with HIGH LEVEL & LOW LEVEL BOM?

Hem -
As far as i know, the batch split does'nt have any relation ship with High or low level BOM.
Suppose if you have inventory under two or three batches and if you want to consume it from all the three batch for one single line item in the delivery. Then the scenario of batch split happens in SD delivery.
Batches are used in all the modules..
Shiva.

Serial number assignment to batch split position in outbound delivery

Hello All,
I have a question for which I can't find any answer even though I have been struggling through several forums, etc. Let me explain it:
I create a outbound delivery for material XYZ which is batch managed and serial number managed. An automatic batch determination takes place. Thus a batch split is created for the main item 10. Since the serial number is required, I enter the serial number for the batch split position 900001. Press enter and save.
The problem is, that afterwards the batch split positions aren't shown in the Batch split screen using transaction VL02N (the batch split positions and also the serial number can be displayed via VL03N). The issue is that the serial number entered cannot be removed nor the batch split can be changed anymore.
Message VL429: Batch/Val.type split only possible if no serial numbers are maintained.
It seems to be a standard SAP functionality, but a little bit tricky. Can anybody help me?
1. How can I remove the serial number assignment for a batch split position?
2. Is there any customizing setting with which I could perhaps deactivate the check?
Thanks a lot in advance. Any input is appreciatted!

Hi,
issue has been solved at last. The batch split indicator can be used to display the batch structure of an item. And here the serial number can be removed as well.

Cost in Batch splits items

HI
I have an issue where the cost(VPRS) of the main item is not getting updated/Displayed in billing document.
The batch splits is done at delivery document and the main item is displayed without cost in billing document
Regards
Ramesh

Hi
Any updates??????
Regards
Ramesh

Automatic Batch determination while creating outbound delivery

Hi,
I have already performed following steps, but still i am facing problem for Automatic Batch determination while creating outbound delivery :
1.CT01- Creation of Characteristics. ( Define Selection Class )
2.CL01- change. ( Define Selection Class )
Add Characteristics in u2018CHARu2019 tab And save .
3.CU70 u2013 create u2018Sorting Sequenceu2019 and assign characteristics
4.Batch Search Procedure & Strategy type
V/C3 u2013 Batch Search Procedure and assign the strategy types
a.To create condition type T. code V/C1
b.To create access sequance T. code V/C2
5.V/C5 - Allocate SD Search Procedure/Activate Check u2013 assign sales organization , order type into Batch search procedure.
6.V/CL - Activate Automatic Batch Determination in SD - Activate automatic batch det. for delivery item categories u2013 select item category and activate auto batch determination
7. VCH1 u2013 Create batch search strategy against strategy type as per the access sequence needed.
Please let me know is there any other step, apart from it.
Tx
Uts

Dear saravanan,
Re :Check from ur material master view ' Sales: General/Plant Data' that availability check should be 02 and batch management should get activated .
Done!
Re: check CT01 - addnl data table name and field name maintained ( which field to be taken for batch determination )
Done!
Re:check CL01 - char - is maintained with CT01 char
Done!
Re: check from v/c1 'Sort sequence' and Qty proposal 1 are maintained correctly.
Done!
Still i am not able to get batch automatically...
Is there any LIFO or FIFO settings i have to maintain in Material master.
Pl guide.
Tx
Uts

Batch Split Items appearing in the billing document

Dear Friends,
Batch determination is active in our system. In the delivery there are two main items. 10 and 20 and each has Batch split and the sub items are 90001 and 90002 respectively.
Now in the billing document there appears are four items with item nos and qty as follows.
item 10 qty 1 - main item having pricing etc
item 20 qty 0 - batch split item no qty n no pricing
item 30 qty 1 - main item having pricing etc
item 40 qty 0 - batch split item no qty n no pricing
The requirement is that there should not be any sub items with zero qty. Only main items to appear in the Billing document.
One important observation I would like to share with you is that in the delivery document both main items and it's sub items have item category as TAN.
Your help is appreciated.
Regards,
Vishi
Edited by: Vishi19 on Apr 27, 2009 2:48 PM

Dear US,
Thanks for replying.
What i would like to know here is if appearance of sub items with 0 qty n 0 price does not affect in the billing document then how come VPRS cost coming only in the item conditions of the sub items. I dont see the cost in the main items.
What I want to knlow here is that does in any way these sub items affect the billing document? i mean in the accounting or data flow to CO-PA or something like that..?
Regards,
Vishi.

VPRS condition currency for batch split items

Hi,
i did the config for billing main item only in my delievry. that is batch split items will not be billed separately in billing.
before doing the above change, the currency of VPRS was appearing as document currency but after doing the above config, the currency of VPRS is changed to material valuation currency.(i.e taken from material master)
what is to be done so that currency for vprs in case of billing of main items shud be equal to document currency.
if there is no batch split, there is no issue of currency. if there is batch split in delivery and i bill only main item, vprs currency gets changed to material master currency.
regards
sac

Normally, it should work for both bath main item and batch split item.
Please check the batch split items:
- what's the item category. Is it relevant for picking?
- what's the plant / sto.loc. in batch splite items? Is it assigned to a WM?
- What's the value in LIPS-KOMKZ field for the batch split items? (EK00 is valid only when komkz = A).

No Single batch split item created in delivery during picking

Similar Messages

Maybe you are looking for