No slideshow on elements 10 for macbookpro

panels frozen; create doesn't show slideshow as an option. help!

The slideshow editor is Windows Only.
You can use the Share tab to turn an album into an on-line album using one of the provided templates. If you save to your hard drive, you can go to the new folder and open index.html which will play in Safari or any browser.

Similar Messages

  • Slideshow in Elements 9: Shows some pictures as "broken"

    Hi
    When I run a slideshow from Elements 9, the "View/Edit/Organisein Full screen" option, quite a few of the pictures appear "broken" and a "broken" type icon appears.  It seems to get worse after that. I'm showing an album of 90 pictures, mixture of JPEG, PSD, RAW files.  At first I though the app only supported JPEG but when I stop at the broken file, locate it, and start the slideshow from there, it dissplays fine.
    Is this a known bug or limitation?  Any fix or workaround?
    I have PSE9 and 9.0.3.0 patch installed.  Running on a i7 Dell PC with 4GB RAM (so in  theory plenty horsepower)
    Any advice appreciated
    thanks
    Stephen

    Please ensure that Thumnails are properly gereated for all the files in your catalog. This happens usually when bigger size thumbnail is not readily available to show.
    + http://bit.ly/plFUdD

  • HELP! Missing photos in Slideshow!  Need for Grad Party Saturday!

    I am panicking!  I created a slideshow in Elements last night....spent HOURS on it and was not done.  This morning when I went in to finish it, about 50 of my pictures that I had downloaded to the slideshow (toward the end of the slideshow) will not show up--only black, blank boxes are in their place!  I saved the program and exited it numerous times in the work process last night, and the photos were always there.  Now, I they don't show up--I can add more with no problem.
    I have Elements 7 and am running it with Vista Home Premium.  I am in tears over this--the slideshow is for my daughter's graduation party Saturday and I have no time to work on it except today!  I have tried opening it as the Administrator to no avail.  I do not have the "missing photos" (???) thing under my "File" icon.  And do not have the money to pay Adobe for their phone support....I can't tell you how important this is to me to have done for my daughter and her party, and I do not have the time to go back through all of the CD's that I have to download the photos a second time.
    Can someone PLEASE HELP!!! ???
    Thanks!

    I know this reply is way too late to help you. But I'll give my 2 cents in case someone goes thru this thread looking for answers (as I did not long ago).
    I had the same issues with PE6 on XP Pro - missing pic for some of the slides after compiling to an output file (.wmv). And my symptoms were similar, missing usually the pics at or near the end of slideshow. I compiled/output the file several times, and noted the different file sizes of the compiled .WMV files, some larger, some smaller (missing more slides). Each time I recompiled the slideshow, different pictures would be missing - sometimes the last two, sometimes the last 4, sometimes 3 slides near the end but had the final two slides appear...frustrating, always a different result. I thought it was a resource issue with my PC since every slideshow had only missing slides near the end of the slideshow...not enough memory, CPU power, etc during the compilation? I toyed with the settings - closed resident memory programs, disabled internet...anything to increase memory (I had 2G of mem on a P4 cpu desktop) and reduce interrupts to the CPU, etc. NOTHING worked. So I loaded PE6 onto my laptop which had 4G mem, Dual Core 2 CPU. SAME RESULT - missing slides! Not sure if it was a resource issue at all, or if it was only part of the problem.
    So, I researched further into this forum, filtering thru hundreds of threads looking for the answer. And I found one semi-relatd, which suggested that the image size was too large. It did not make sense since all my pics were the same size, so why only the slides near the end of the slideshow?? Well, it would be a pain to reduce the size of all the pics in the slide show, so I only reduced the last quarter of the pictures (mostly the ones usually missing), leaving the first 3/4 of the pictures their original size (about 4000/3000 pix). The author of that thread mentioned that PE had issues with video output on pictures greater than 2000x2000. So I reduced the last 1/4 of my pics to 2000x1500 (they were landscape format). Saved the slideshow and then tried another output...IT WORKED!
    Still not sure why only the last 1/4 of the slideshow was affected, and I did compile this on my newer, more power and more mem laptop, so it could be a combination of what I did. Not going to investigate this further...I'm tired. I think the main thing is picture size. New cameras are 10MP-15MP with huge size images (on the default settings), and getting bigger. If this is the case (pic size issue), I think Adobe should really try to fix this.

  • Slideshow in pse8 for mac

    Um. I'm trying to create a sldeshow that I can upload to youtube.  When I click create/create pdf slideshow it opens bridge and allows selection of some pictures, but never does anything else.  I read the threads here about this whih described the slideshow ccreator as "lame."   I can't get it to work at all.
    What am I missing here?
    After looking through comments and tutorials, I found that that bridge has a create slideshow option on the output icon on the toolbar.  ok, so how do iI get it to enable?  I select pictures; I open them into elements,,,   nothing.
    As a general comment, a friend of mine convinced me that mac and photoshop was the way to go. I decided not to spring for a full photoshop, so I can't comment on that.   But so far my experience of the upgrade from windows elements 5 to elements 8 for mac overall has been lame.  I had trouble with the install (I got a font missing or corrupted error);  the blending dropdown on the layers menu has to be clicked for each change unlike the windows version and really slows my workflow.   Bridge in general seems behind organizer.   Now this, the slideshow maker, which worked just fine in windows, doesn't appear to work at all.    I just viewed the elements 9 video on slideshows, which said that this was a windows only feature.  Duh.
    A comment by Barbara suggested that Adobe thought iphoto, iwhatever was enough. It would be nice if Adobe said that upfront, and showed at the beginning how to integrate elements into iphoto.  I've wasted two days searching the forums and the tutorials to figure that out.
    I recently bought a drawing tablet and got a free Elements 7,   I think I may install it on my laptop.
    The only real advantage of the mac has been the screen.
    At this point, call me a dissatisfied customer of elements for mac

    Thanks fo rthe response.
    Concretely, I still don't have any idea of what the create/pdf slideshow button does besides take you to bridge,
    The windows version is a wizard that allows you to select pictures from organizer and then arrange the pics, choose transitions etc
    In bridge I see no further steps to complete the slideshow.
    Except...   there's an output/pdf menu in bridge.  If that's it, how do you get that to enable?
    There really is no documentation that says in one place how to handle this.  It was only by finding your comment in the forums,
    and then the demo on making pe the iphoto editor, that I was able to infer that this was the likely way to go.
    That is not adequate.

  • Slideshow in Elements 13 won't import to Premier Elements to burn DVD

    I created a slideshow in Elements 13 and tried to create a DVD of it.  When it went to import to Premier Elements, I got an error message that the file couldn't be imported because I lacked the required codec .  I am working on an iMac 14, OS X 10.9.5.  How do I find/download the "missing" codec (I purchased this bundle specifically in order to do this!!)?

    OK I think the problem is probably related to the platform swap and you may need your account re-set. Only Adobe staff can do that.  You need to contact Adobe directly using the link below. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
    1. Adobe Photoshop Elements
    2. Adobe ID, and signing-in
    3. Click on the blue button: Still need help? Contact us – then click the area marked chat 24/7, then click “start chat ”
    It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. Have your serial number and previous case number available. The agent can directly troubleshoot your system if you agree to activate the Adobe Connect add-on.
    Click here to get help now Contact Customer Care

  • I am trying to create a slideshow in Elements 10

    I am tring to create a slideshow in Elements 10 Organiser, however the is no "slideshow" tab to select in the create options list, can anybody help please?

    Hi Domnic and Barbara, thank you so much for your help and replies. Yes, I'm using a Mac which is obviously my problem.
    Thank you both so much for your assistance, have a great day, Cheers, Ray

  • I created a slideshow in Elements 12 and burned a DVD in Premiere 12. Why was the orientation of some of some of my slides rotated 90 degrees

    I created a slideshow in Elements 12 and burned a DVD in Premiere 12. Why was the orientation of some of some of my slides rotated 90 degrees?

    Rick
    Have you looked at Delete and Close Gap as well as Delete for what you describe?
    Nonetheless, adding or moving clips to an existing Timeline content without disturbing the existing Timeline content can be challenging and complex under certain scenarios.
    Typical solutions include making these moves with a keyboard modified held down (Windows Alt or Ctr). I am strictly an Elements Windows user, so we will need to find the Mac counterparts for the Windows keyboard modifier techniques.
    Also, if one move triggers a multi-chain disaster, then you should consider grouping block of clips so that they do not move while you are busy with your Timeline maneuvers. Check out the Clip Menu options for Group and Ungroup.
    Some times in the "Mac condition", you need to use fn in addition to the command to achieve some of these Windows counterparts.
    The following video tutorial on arranging clips and keyboard modifiers is being posted for informational non promotional reasons.
    Premiere Elements: Arranging clips on the Timeline using modifier keys | lynda.com - YouTube
    It is demo'd with Premiere Elements 8, but the principles are the same for later versions of the program.
    Here is one variation of the issue on Windows.
    ATR Premiere Elements Troubleshooting: PE: Delete and Close Gap Failures
    You should not have to delete audio to prevent it from being split by an addition to an existing Timeline. The keyboard modifiers should help you resolve this type of issue.
    Please review and consider.
    Thanks.
    ATR

  • Slideshow to DVD for better quality

    PSE4 slideshow quality on a VCD is horrible. I am using good quality images from a Nikon D70 and windows XP. Copying the slideshow to a WMV and then burning it to a DVD is still poor quality. I don't want to use PDF. Is there any way to copy direct to a DVD without premiere elements? Are there any other ways to increase the quality of the slideshow? Thanks for any help offered.
    Dave.

    PSE4 slideshow quality on a VCD is horrible. I am using good quality images from a Nikon D70 and windows XP. Copying the slideshow to a WMV and then burning it to a DVD is still poor quality. I don't want to use PDF. Is there any way to copy direct to a DVD without premiere elements? Are there any other ways to increase the quality of the slideshow? Thanks for any help offered.
    Dave.

  • A slide show with audio created in PSE 9 plays fine in edit.  When brought to Premier Elements for dvd burn, the audio no longer plays.  It appears in the edit, but no audio is played.  This happens consistently.  What setting might be wrong?

    A slide show with audio created in PSE 9 plays fine in edit.  When brought to Premier Elements for dvd burn, the audio no longer plays.  It appears in the edit, but no audio is played.  This happens consistently.  What setting might be wrong?

    H-SPhoto
    That Photoshop Elements 9.0.3 Update has generally been discouraged by the Photoshop Elements gurus. But, I am not going to factor that into this at this point.
    This is what I would ask you to look at in the Elements Organizer 9 accessed from the Photoshop Elements 9 or Premiere Elements 9.
    a. Create your slideshow in the Elements Organizer 9/Create/Slideshow/Slideshow Editor. Then use the Output option of Edit with Premiere Elements.
    From your description, you are probably using the Output Option of Burn to Disc DVD which will take your slideshow directly in the Disc Menu section of Premiere Elements 9. The preferred transfer of the Elements Organizer 9 slideshow to Premiere Elements 9 Editor is by the non wmv route "Edit with Premiere Elements" not the wmv route of Burn to Disc DVD.
    Let us explore if any of the above is involved in your issue and then we will decide what next if necessary.
    Thanks.
    ATR

  • Mmp3 download into audeo in slideshow of Elements

    I downloaded a mp3 track. Tried to add it to audeo in a slideshow of Elements. Told your system doesn't have tshes required compresser/decompresser (codec) installed. How do I install that? Reply to [email protected] . Norm

    If you want to process those files in the software that you have already you will need to use DNG converter 8.3 or newer to create digital negative copies of your raw files. If you upgraded your Lightroom to Lightroom 5.3 or newer you would be able to open the original raw files. I am not familiar enough with Photoshop Elements to tell you for sure what version you need. But it has to be compatible with Camera Raw 8.3 or newer in order to open the files from your camera.

  • Fetch Top level WBS elements for delivery type LP

    Hi everyone,
    we are working on a delivery analysis report and we are in progress of fetching sales order number for deliveries with delivery type LP.
    How we are doing?
    so we are fetch the UP values from PRHI table for the wbs elements in LIPS.
    Now we need to fetching the top level wbs elements from PRHI table by passing the UP values to the same table until the UP field value becomes initial.
    Then fetching the corresponding sales orders from the VMPA table for the wbs elements from PRHI table for the value of corresponding UP field is initial.
    So it is going through so many iteration to fetch the UP value again and again until it is initial.
    What we need?
    So if someone can suggest a FM or method to fetch the top level WBS element for the given WBS element from LIPS table will be of great help.

    Hi,
    Try FM
    'BBP_PS_PROJECT_GET_LIST
    'BAPI_PROJECT_GETINFO

  • Two Cost Element for the same GL

    Hi,
    We have 2 Company Codes - 1000 & 2000. We are using same CoA in both the Company Codes. We have a GL, say 12345678 for posting short/excess amount. So during MIRO, the accounting entry would be:
    GR/IR a/c dr.          10,000
    GL 12345678                  2
                       Vendor            10,002
    GL 12345678 would be dr or Cr would depend on short/excess amount.
    We have created Cost Element for this GL 12345678. If I post the MIRO without attaching a Cost Center to this Cost Element system thows an error to attach the Cost Center. I have separate Cost Center for Company Codes 1000 & 2000 however I can only put one Cost Center in this Cost Element.
    Can anyone advice how can I post the above mentioned entry with different Cost Center. This line item (GL 12345678) is generated automatically and the Cost Center field is greyed out hence I don't have option to enter the Cost Center during MIRO. I checked the FSG of this GL, Cost Center field is 'Optional' over there.
    Thanks,
    Sandy

    Solution Option* -You can  assign Differant Cost Centers to Company Code 1000 and Company Code 2000 in OKB9 Transaction Code.Follow the  below process....
    --- Go to OKB9
    --- Select New Entries button
    --- Give the Company Code 1000 in first row and 2000 in 2nd row
    --- Enter the Cost element 12345678 for company code 1000 and 2000
    --- Enter the relevent cost centers  for company code 1000 and 2000
    --- Select Save
    Thanks
    Fit 4 Nothing

  • How do I add more songs to my slideshows in elements 11?

    How do I add more songs to my slideshows in elements 11?

    Welcome to the forum.
    However, this is the Photoshop>General Discussions forum, and does not cover either Elements program, Premiere Elements, or Photoshop Elements, or their Elements Organizer.
    If you can please let us know exactly which of the Elements program you are using (either Premiere Elements, or Photoshop Elements, through the Elements Organizer), a MOD can Move your post to the appropriate forum, where you will get quick answers.
    Also, additional music can be Imported into several of the Elements programs, but knowing exactly which you are using, will dictate the instructions.
    Good luck, and please let us know more.
    Hunt

  • How to add a new data element for existing table filed(Primary key field)

    Hi Experts,
    How to add a new data element for existing table field(Primary key field)
    For this filed ther is no foreign key relation ships and even check table.
    while activating table it is giving message like below.
    can you help any one to solve this and wil steps to add new dataelement for existing primary key filed of a table.
    Check table (NAMING SPACE/TABLE NAME(EX:/TC/VENDOR)) (username/19.02.10/03:29)           
    Primary key change not permitted for value table /TC/VENDOR
    Check on table  /TC/VENDOR resulted in errors              
    Thanks
    Ravi

    Hi,
    Easiest way is to download the table eg into an Excel table (if possible) or text table. Drop the table from the database. Build your table with the new key field. Build the database table again and fill it.
    You can do it also over the database into a new table. Drop the old one. Build the enhanced one and fill it. Afterwards drop your (temporary) table.
    Maybe there are other ways, but this works.
    Success,
    Rob

  • Adobe elements for Mac and CS5 for Mac

    Hi, I have two full licenses for photoshop, one for elements and one for CS5. Would it be possible for me to swap the Elements 8 (mac version) for Elements 8 for PC. I want to teach my son to use Elements for his college work, while he has a PC and I have a mac. I bought the Elements for a course that only used Elements but quickly as I moved on I had to use full CS5. I can't remember if I used the elements serial number to upgrade to CS5, where I should have CS4 serial number.

    Hi,
    As per adobe policy on cross platform swap : http://kb2.adobe.com/cps/405/kb405819.html.
    "You can swap only current versions. If you have a previous version, you cannot swap to a different platform or language of the previous version--instead, it's necessary to upgrade."

  • Had a windows computer with my element 7.  Now just bought a Mac OSX   version 10.9.2 what would be the best photoshop elements for this machine.  I did download elements 12 from Apple store but kept getting incompatible message when trying to open a phot

    I thought elements were simple but maybe it is just me.  Having problems moving photos from iphoto to elements

    Duplicate post; see:
    had a windows computer with my element 7.  Now just bought a Mac OSX   version 10.9.2 what would be the best photoshop elements for this machine.  I did download elements 12 from Apple store but kept getting incompatible message when trying to open a phot

Maybe you are looking for