No songs burned on cd after cd is ejected

No songs show up on the cd after burning. I burned a cd this morning without a problem, went to burn one a few minutes later( same brand) and I got this message after cd was finalized. You have inserted a disk containing no volumes that Mac OS X can read. To continue with disk inserted, click ignore. I have tried different playlists shut down Itunes rebooted the computer. Nothing changed still the same problem. Cd shows zero memory used, but cd can't be used again because it's not blank. I can burn these song on my windows computer just no the mac. I have latest version of Itunes 6.0.5 Any help would be appreciated. Thanks

Thanks for the reply. I didn’t articulate the situation properly, although you do have the correct problem. Here’s what I do to make a CD (Yes, it is a regular CD-R CD). First, I have a stand alone CD recorder. I record the songs I want from my stereo to the CD recorder using a rewrite CD. I do this because the songs go through my graphic equalizer, which enhances the sound that I like. Then, I import the re-writable CD to my iTUNES using my CD/DVD bay in my PC. Once imported, they show up as track numbers. I then input the track names and artists, after which I burn the final CD. It’s after the CD is burned, the tracks and artists still come out as they were before I had input the information. I’m using the same CD bay on my computer to burn the songs as I am when I try to read the finished CD. Shouldn’t the names so up if I use the same bay? I did double check, and the “include CD Text” box is selected. Any other suggestions? Thanks. Gregg

Similar Messages

DVD burn image remains after unburnt dvd ejected

I was burning photos to a DVD but the process failed [bad disk] so it was ejected unburnt and is now recycled plastic. The Finder now has no way to remove this icon in the side bar or in Disk Utility without reinserting the missing disk. Is there a way round this? Disk Utility itself seems unable to assist, nor 'Help'. The Superdrive still accepts other disks to read or burn, so is working OK. Cheers, Bill

Hey, i think if there could be any of the possibilities you talk about, it might have been a naming error. All files i created had the same name in the new project as in the old one. But i used 1 asset arrow that i copy pasted from a library button "Red facets button" and shift pasted on my own buttons as highlight (paste sub picture). In the first project i did not do this as a straight forward thing, a lot of deleting and adding because i had never done it before and there might have happened something with the naming of the arrow i pasted. I used the same arrow in the second project but without messing with delete, paste all the time. But some how there is no problems now, just something wrong with the last project file =S
Not so important:
I also noticed while building the new project i once got an "General error", not sure why but happened after a random crash. And 2 get rid of it i had to delete the menu and make it again (i could not edit anything in the menu without getting the error). I rebuild the menu and had another crash when exiting the program, because i thought my computer needs to boot after 2 days online. When i reopened the project i got "General error" in the menu again, but after some clicking it didn't show up (random). Finally i got my project setup and everything works, i did the copy past as sub picture as a straight forward thing.

HT203173 Why won't my songs burn to disk?

My itunes recently update to the 12.1.1.4 version (I am on windows 8 by the way).
After this download all 1200 of my songs were missing. I followed an online guide to get them back and I also plugged in my ipod and transferred everything back onto itunes.
I have created a couple of playlists and they are just not burning to disks. It has nothing to do with purchased songs as believe it or not, they are all cd imports.
Itunes follows the notion of burning the disk and all seems well. I eject the disk when its complete and put it into the cd player in the car but doesn't work. So I put the cd back into my laptop and it says it is a blank disk.
So, what's happening? Why won't songs burn to a disk since this upgrade (and no it is not a faulty disk as I have tried 5 different ones)

This link provides the location where your iTunes media folder is located.
Deleting the iTunes app does not touch your iTunes media folder.
Once found, you need to select the location at iTunes > Preferences under the Advanced tab.

I manually add my songs to my iphone, after dragging from itunes, it shows the syncing message but the songs do not show up on the ipod. I was able to copy songs successfully before.

I manually add my songs to my iphone, after dragging it from itunes, it shows the syncing message but the songs do not show up on the ipod. I was able to copy songs successfully before. Please help.

Now title changes are showing up on my iPod, but not artist and album changes

I manually add my songs to my iphone, after dragging, it shows the syncing message but the songs do not show up on the ipod. I was able to copy songs successfully before.

I manually add my songs to my iphone, after dragging, it shows the syncing message but the songs do not show up on the ipod. I was able to copy songs successfully before. Please help.

Now title changes are showing up on my iPod, but not artist and album changes

I would like to know, on the ringtone page, where you can select songs out of your music library, is there a way to remove a song from the list after its selected? I would thin there would be a way to "delete" the songs from the list. (Clock app)

I would like to know, on the ringtone page, where you can select songs out of your music library, is there a way to remove a song from the list after its selected? I would thin there would be a way to "delete" the songs from the list. (Clock app)
Let me explain:
In the clock app for ios 6.0.2 I am a little confused. It allows you to go into your music library, and create a ringtone using any songs you choose. However, I cannot find a way to remove a song from this list, just like I cannot delete one of the preset ringtones (which I'm not trying to do, but just as an example)
Thanks for your time! If you need more information just ask.
(I believe both my iPod and iTunes are up to date)

I believe you just are able to delete them from iTunes.
Hope it will be helpful

DVD burning not working after upgrading to 10.5.1

Hi,
I just purchased a macbook and found that dvd burning stopped working after upgrading to mac os 10.5.1. I went back to 10.5 and now it works without problems. Since so far I haven't experience problems with 10.5, I will continue using it.
Anyway, I just wanted to let other users know about this problem. I didn't find any references about it in the forum.
Best wishes,
Manuel

Hi,
I just got DVD burning to work under 10.5.1. I had originally formatted the OS-X partition as "case sensitive". Today I reformatted the partition as a regular Mac-os journaled partition, re-installed leopard and the upgrade, and now DVD burning works fine. I am not 100% sure, but it seems that using the case sensitive format caused the problem.
Manuel

Can't burn blank CD after installing CD that came with ipod nano

Can't burn blank CD after installing ipod software - I have the system prefs set to launch Toast 6 when inserting a blank disk, and the drive just churns and then ejects the CD. It mounts and runs burned music and data disks with no problem.
My job requires me to burn data disks from pictures I take at work. Should I re-install Toast? The OS? I ran Disk Utility to check/fix permissions, and no change.

The CD that came with the nano won't have anything on it that you won't get with a full iTunes install. In fact, it may have been an OLDER version of the iTunes software than what you had installed before.
I'd reccomend downloading the latest version of iTunes from Apple and installing that to rule out software reversion issues.
If the problem still exists, try booting into toast before inserting the blank disk and see if Toast can still burn to the CD. If it can, then odds are you have to re-instruct your computer to boot toast when a blank CD is inserted. If it can't see the blank CD, or the Finder spits it out again, then I think you'd have to re-install Toast.
Doc

I have a library of nearly 2000 songs and all of which were purchased/downloaded in their entirety. It seems that after one of the iTunes updates- many (not all, but plenty) of those songs were "cut off" after playing about 2/3 through them- I haven't gon

I have a library of nearly 2000 songs and all of which were purchased/downloaded in their entirety. It seems that after one of the iTunes updates… many (not all, but plenty) of those songs were “cut off” after playing about 2/3 through them… I haven’t gone through the entire library to see which are complete and which were cut off, but hoped this is “known problem” and hopefully with a known “fix”… Make sense?
Please advise…
Thx,
Johnny

I have a library of nearly 2000 songs and all of which were purchased/downloaded in their entirety. It seems that after one of the iTunes updates… many (not all, but plenty) of those songs were “cut off” after playing about 2/3 through them… I haven’t gone through the entire library to see which are complete and which were cut off, but hoped this is “known problem” and hopefully with a known “fix”… Make sense?
Please advise…
Thx,
Johnny

We are currently having troubles with our iTunes. Playing different songs and randomly it changes the name of the song to pink time after time. We could go through 5 songs before it will change the next one to song title time after time and artist pink

Hi I am having trouble with iTunes! Randomly when I click on a song in iTunes it changes the song title to time after time and the artist is pink.
I could click on 4 songs and they will be normal but then the 5th one will change the info to time after time.
I haven't done anything different or new, it started doing it all of a sudden, well that I have noticed anyway. Please help.

Hello Schimi. The Time Capsule is a kind of product that offer you two possibility:
- To use the TC as a router or as an external HD.
The difference between WPA and WPA 2 are:
- They are two kinds of internet connection.
WPA uses dynamic key encryption , which means that the key is constantly changing and makes the invasion of a wireless network more difficult than WEP . WPA is considered one of the highest levels of wireless security for your network and is recommended if your devices support this kind of encryption . Newer routers offer WPA2 security . WPA2 is compatible with WPA , but offers higher security level . In fact, it meets the high standards of many government agencies . If the router and computer support WPA2 , this should be your choice.
If you need any help or if you find some difficult setting up it you can contact Apple Support.
I am sure that they can help you with that.
I am sory for the delay. I holpe that you solve your issue.

Hi, my computer is not detecting any display, i'd been having this problem since i connected my computer to a tv, the tv burned up, and after that my port doesn't detect anything at all?? Was that the problem can I fix it.I have the lion 10.7.5.

Hi, my computer is not detecting any display, i'd been having this problem since i connected my computer to a tv, the tv burned up, and after that my port doesn't detect anything at all?? Was that the problem can I fix it.I have the lion 10.7.5. Dont know if I changed settings or something.

Hello,
It isn't the fw in Network you want o use or look at, that's for something completely different.
My first suspect is the Power Adapter on the LaCie has gone.
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html

How do I get back all the songs stored in iTunes after they were wiped out off my computer?

How do I get back all the songs stored in iTunes after they were wiped out when I re-installed Windows 7?

jldacmd wrote:
How do I get back all the songs stored in iTunes after they were wiped out when I re-installed Windows 7?
You did not make a backup of your computer before you erased it?

TS1424 Trying to purchase music singles but every time click on buy song nothing happens even after signing into account

Trying to purchase music but every time click on buy song nothing happens even after signing into account

Same for me. iTunes 10.7 on Mac OS X 10.6.8.
Apple, I'd love to give you some money, but you won't allow me to do it. Please fix this.

How do I save/burn my images,after editing, to a disc and what format JPEG? THX!!!

How do I save/burn my images,after editing, to a disc and what format JPEG? THX!!!

You're lacking information. We need to know what software you are using what version it is. What computer system and what version is the operating system.

HT203167 I downloaded a Song and is incomplete after 3 minute of playing it jumps to the next song and is a 6:45 minutes song

I downloaded a Song and is incomplete after 3 minute of playing it jumps to the next song and is a 6:45 minutes song

If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

No songs burned on cd after cd is ejected

Similar Messages

Maybe you are looking for