No sound after 2.6.27.1-1 update XPS M1530 [solved]

I have no sound on my kdemod 4 after kernel 2.6.27.1-1 update
Last edited by venky80 (2008-10-21 17:24:56)

i have put the following in my rc.conf file
MODULES=(!snd_pcsp !pcspkr !snd-pcsp acpi-cpufreq cpufreq_ondemand cpufreq_conservative cpufreq_powersave sky2 iwl4965 snd-hda-intel snd snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer soundcore loop fuse vboxdrv tun)
still I have no sound
Last edited by venky80 (2008-10-21 01:56:06)

Similar Messages

No sound after os x 10.9.3 update

After upgrading to os X 10.9.3, there is no longer any sound, nor does it see any speakers including the internal speaker.
Is there a fix?

Hey Guys,
After recent SMC+EFI update on Macbook Air (Mid 2013) OSX v10.9.3, my internal audio device disappeared,
I tried everything I could find in google with no luck. (NPRAM+SMC reset, reloading kents etc.)
THIS IS WHAT SOLVED THE PROBLEM FOR ME:
1. I opened /System/Library/Extensions folder, there I found besides the usual AppleHDA.kext, also an AppleHDA.kext.disabled one.
2. I switched between them (swapped their names, sometimes you'll have to do it from the "get info" menu to take effect)
-- if you don't have this AppleHDA.kext.disabled one, try searching for one lil older than yours in the internet
3. then I unloaded and reloaded the kent dir again-
sudo kextunload /System/Library/Extensions/AppleHDA.kext
sudo kextload /System/Library/Extensions/AppleHDA.kext
And voila!
Hope it helps someone, as I spent hours until getting this to work again

No sound after iOS 7.0.6 update

Hello,
My iPad 2 has no sound after my iOS 7.0.6 update. I reset All Settings, shut down by holding the sleep/wake button and home several times and checked if my mute was on. When I press the volume buttons it says "Sound Effects" and no volume bars display. I checked my sound in settings and it chimes when change the volume but no sound in games, YouTube, Netflix, etc. Please help!
Thank you!

Mute switch got turned on. Ooooooops!

No sound after upgrading to Windows 7 M55-S3293

I upgraded to Windows 7 and installed the drivers from Toshiba for my sound card and before installing checked the windows XP box under the compatibility tab. No sound. I did windows update for this driver and it installed an updated driver. No sound. I went to Realtek and installed the windows 7 generic driver for this sound card (thats all manufacturer's offer is a generic driver) and LOW sound. Now I rebooted and back to No sound.
Before windows 7 sound, after no sound.
Toshiba put out a fix for a contextant audio driver for the low sound problem to be corrected with windows 7 but I cannot find anything for my computer.
I don't know know what to do! I don't want to go back to using XP but sound is REALLY important. I would think this is an integrated sound card (Toshiba isn't making service manuals public anymore, it was there the other day and gone today) so I cannot remove it. I don't think I have any available PCI slots to install a new one internally and I don't want extrenal speakers since I do a lot of traveling.
Is there a fix I don't know about? What can I do? Please HELP!!!

Hi Ryan,
Go here: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/downloadDetail.jsp?soid=1671893&pf=true
and download the software called "Sound Utility to Turn Mute Off After Upgrading to Vista", it is made for people that upgrade to VISTA, however, once you have all your Toshiba updates installed by downloading the Toshiba updates, then apply this update to your Windows7 system and the problem will resolve.
I don't know why they did not make this update part of the Toshiba Update Package.
I hope this helps,
best,
Alejandro

No web sound after 10.4.7 update

I am unable to get any web based sound,either on safari, firefox or netscape. No sound on quick time, windows media player or real player. Alert tones work, Itunes work, just nothing from the internet. This began imeadtaely after the last 10.4.7 update. Apple care was unable to help with this situation. All sounds works on the windows side, just not on the Mac side. THIS IS GETTING VERY FRUSTRATING! Is this happening to anyone else? Are there any solutions to this problem?
Tristanreisfar
Mac Mini Mac OS X (10.4.7)

wow, that is very strange...well, i think that you should do a fresh reinstall of Mac OSX and only upgrade to 10.4.6 and then wait for 10.4.8...don't worry, this isn't that big of an update
 Mac Mini Intel Core Solo- 1 GB RAM- Superdrive- Production week 18 Mac OS X (10.4.7)

HT4623 My iPad 3 has lost the speaker sound after updating to iOS 6.1, headphones are working fine

My iPad 3 has lost the speaker sound after updating to iOS 6.1, headphones are working fine. Please help me out, done all the troubleshooting like restarting, side switcing, cleeaning the headphone jack etc.,

Hi I also have this problem. Sound was only working on the headphones and also on the volume slider in the settings app. Everywhere else I get no sound and no volume slider. Now the headphones don't work either.
(I'm using an ipad 2 iOS 6.1.2)
And NO it's not muted. I've reset all settings and restarted the iPad. Been searching forums for a couple days. Some say its a dirty docking port problem, others suggest a Skype or other app update that could be the problem.
No volume control icon appears when I press the volume control buttons. Only says sound effects, if it says anything at all. Most often there is NO volume icon. YouTube, video, music, and other game apps, no sound.

Is anyone having issues with sound after upgrading RAM?

I recently bought a 2009 Mac Mini with 1GB of RAM. Everything was working fine so I decided to upgrade the RAM to make running more apps a little smoother.
I took it to KRCS (an Apple Premium Reseller) and they put in another 1GB stick. I took the MM home and booted it up but no chime. I loaded iTunes and songs wouldn't play. I couldn't even turn the volume up or down.
After taking it back to KRCS they verified all the connections were ok and everything was seated correctly, however the sound still wont work. They ran some hardware diagnostics and they said that it is showing that there is a sound devicde present but it isn't showing any input or output devices once booted in to OS X.
Has anyone else had this problem? Does anyone have any suggestions as to what could be causing this? Could it be a firmware issue do you think?
Cheers,
James

Morning peeps
As mentioned I booked my Mac Mini in with an Apple Genius to see if they could shed any light on the problem. So I saw a very helpful guy called James (go figure 8-)) who looked first of all looked to see if there were any reported problems by Apple. He also had a look around the net to see if there were any suggestions but unfortunately this all proved to be fruitless. He then tried booting from a clean drive to see if it was a software issue but this again failed, leaving him a little stumped.
Finally after a few minutes of looking at verious hardware information he decided to look at the RAM as the Mac was reporting the new 1GB stick I had installed was from a different manufacturer. Again no luck and at this point I knew what was comming...
"It doesn't look like I will be able to fix the problem today."
After all his efforts he couldn't seem to solve the issue so the next stange involves replacing some of the hardware. He showed me that he had gone ahead and ordered a new sound board, the ribbin that connects it to the main board and something else which escapes me at the moment, all of which is covered under the waranty.
So after all that the issue still remains. My Mac Mini is at the Apple Store at the moment and is awaiting the new parts to be installed. James was confident that it could be fixed with these new parts, however he did say that if it couldn't be fixed then Apple would replace it with a new one. He also mentioned that they would try and get the RAM upgrade working once the new hardware was fitted, but if that is unsuccessful he is going to give me the RAM back to get a refund at KRCS.
I think I have covered everything there - sorry if I started to ramble a bit
If you need any more information then I would be more than happy to help.
Cheers,
James

Poor sound after updating to ISO 7

Poor sound after updating to ISO 7. Before updating i had terrific sound both on my music and videos I recorded with my cam, i had to turn it down. Now, after update, i put volym on Max and can hardly hear the music or whatever. Anyone else with same problem?

I also loved my iphone because it HAD great sound. Since the update of the iso7 for my iphone 4s, i am missing my calls because I cannot hear the phone ringing. The sound is so low even though I have it on the highest sound possible. The is something in the update that caused this problem among others such as the phone blinking out while I am viewing videos. Help Apple! THe battery is going from 100 percent to 20 percent in two hours even when I have almost turned off everything on my iphone. I need my sound back! Apple please find out what happened in your update that caused the loss of the sound!

Lost ipad sound after upgrading to ios7

As soon as I click the iOS7 upgrade my ipad volume is gone

First thing to try if you have no sound at all, even in the Music App, try rebooting the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If you lost sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085
Still no luck - try cleaning the dock connector opening of the iPad with a soft brush and just a little bit of rubbing alcohol.
If that fails, then try resetting all settings. Settings>General>Reset>Reset all settings. No data will be lost but all device settings have to be entered again.
Should you still have no sound after trying all of these steps, restoring the iOS software would be the next thing to try.

Mac mail makes no sound after sleeping

Why does Mac Mail stops making the new mail alert sound after falling asleep? How can I solve this?
I have to close mail, wait a few seconds, then reopen to restore the sound. Very annoying.

Reset The Pram
http://support.apple.com/kb/ht1379
(Try several attempts to get the corect sequence)
Reset the SMC
http://support.apple.com/kb/ht3964

Why my iPad mini 2 no sound after updated to iOS8

Why my iPad mini with retina display no sound after updated to iOS8

I solved for my ipad mini retina:
- Go to Settings->General
- Change the function of the slider on the side of the ipad from 'rotation lock' to 'sound off'
- Wiggle the slider up and down
- Sound is restored
- You can set the slider back to rotation lock again

Garbled sound after upgrade to ios7.0.6 for ipad

pls advise if you experienced garbled sound after upgrade to ios7.0.6 for ipad2. thanks

Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset

No sound after Windows 8 update on HP Pavilion G6

Hi,
After updating Windows8 to 8.1 on my HP Pavilion G6-2235TX laptop i have no sound.
I have followed instructions posted on this forum and had no luck getting the sound to work.
I have tried updating to a couple of different drivers SP59649 & SP58517
Can anyone help with the correct driver that will work for my model laptop
Thanks

Hello gardied63,
Welcome to the HP Forums.
It appears that after updating to Windows 8.1 you don't have any sound and have tried to get it working. I will try to help you with this.
The link to the driver update for your sound can be located here: IDT High-Definition (HD) Audio Driver. You will notice that it's a file that you've already tried. However, this is the correct driver for your Notebook.
What you can also do is follow this document: No Sound from the Speakers (Windows 8). Read over it carefully and try everything suggested as something here may help in correcting the issue you have.
Please let me know how this goes, thank you for posting on the HP Forums.
I worked on behalf of HP.

No sound after OSX 10.6.8 upgrade

No sound after OSX 10.6.8 upgrade

Go step by step and test.
1. System Preference > Sound > Output > Internal Speakers
    Highlight Internal Speakers / Headphones
    Make sure that Mute is not enabled.
2.Plug in and remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so, uncheck it.

How to prevent key sound after pressing Enter

I don't want to hear "beep" sound after pressing enter in TextBox object.
Is it possible to prevent this?
Private Sub TextBox1_KeyPress(ByVal sender As System.Object, ByVal e As System.Windows.Forms.KeyPressEventArgs) Handles TextBox1.KeyPress
If e.KeyChar = Convert.ToChar(13) Then
MsgBox("You will hear "beep" after you press it")
End If
End Sub

Hi,
I am guessing this is a single line TextBox. You can use the KeyDown event to detect the Enter key being pressed and Suppress the Key. If you are using the Enter Key to do something when it is pressed in the TextBox then put it in here
instead of the KeyPress event.
Private Sub TextBox1_KeyDown(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyEventArgs) Handles TextBox1.KeyDown
If e.KeyCode = Keys.Enter Then
e.SuppressKeyPress = True
'Do something here if you need to when Enter is pressed
End If
End Sub
If you say it can`t be done then i`ll try it

No sound after 2.6.27.1-1 update XPS M1530 [solved]

Similar Messages

Maybe you are looking for