No sound after installing W7

I installed W 7 and everything is working except the sound.
No audio output installed!

I have the same issue. Is it Beats by Dre speakers?
What model is your cpu?

Similar Messages

No sound after installing flash player 11.3.300.262, have mozilla 13.0.01, working fine with flash player 11.2.202.233

Have no sound after installing flash player 11.3.300.262. Working fine with flash player 11.2.202.232

hello, unfortunately this seems to be a bug in adobes flash plugin 11.3. please refer to the following forum entry on how to handle the issue or report the problem with your system details to adobe.
http://forums.adobe.com/message/4483563
https://bugbase.adobe.com/index.cfm?event=bug&id=3210964

Portege 3110ct has no sound after installing XP Pro

I'm a novice when it comes to laptops, so here is the problem: My 3110ct has no sound after installing XP Pro. Didn't have sound when I bought it with another operating system on, report says no sound device installed.
Does this mean I need to get a chip for the laptop or is it a driver I need & where can I find the part or the driver for this.
Please help.

Usually if the sound driver was not installed you will get no sound but also a yellow exclamation mark should appear in the device manager.
If the sound card chip is damage I presume you will be not able to see the yellow exclamation belonging to the sound card in the device manager.
You bought this Portg as a second hand unit. Am I right?
So possibly the sound card is faulty.
The computer uses a ESS ES1978 (Maestro-2E) and ES1918 sound chip.
Check if you can find an XP sound driver in the internet.

No sound after installing windows 8 on my hp 620 help

no sound after installing windows 8 on my hp 620 help
This question was solved.
View Solution.

I cannot find your audio driver on HP's support page, but I was able to locate this one, which is the same driver as yours, just the most recent version. According to what is listed, it supports Windows 8. Give it a shot and let me know if it works for you.
http://goo.gl/0IMBd
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

NO SOUND AFTER INSTALLING WINDOWS 8.1

Hi, I'm hoping someone will be able to help. My sister has a compaq 58 laptop and after installing windows 8.1, now has no sound. The sound was there when 8.1 was installed but after logging off and logging back on again, the sound disappeared. We reinstalled windows 8.1 and same thing happened. We have run scans and got sound again but once again logging off and logging back on again, the sound disappeared, very frustrating.
The product code is DOX18ea#abu and serial number [edited Serial Number by Moderator]
help would be much appreciated.

Devina, This seems to be a common problem with Windows 8.1. It does not save a working state when logging off. I was afraid to touch my pc when the AUDIO was in a working state. However Microsoft logged me off with no fear and did not save the working state. What a great "glutware" corp. Having said that when the AUDIO is working it appears to work great! Sure wish HP/MICROSOFT could get their act together. Can you say "BASE BAND" , "DSP", "FIR" ETC. Well they think they know the fancy stuff. Now if they could just get it to function for normal people. Can you say "KISS".
ham123 ps: just send it back!! for total care!!!

No sound after installing Adobe Flash 11.7

After installing the new Adobe Flash Player 11.7 I have no sound.
I reinstalled, uninstalled and started the imac new but I find no solution.
When I'm starting the imac, I always heard the opening sound.
After searching and contacting the support with no results, I try to turn
up the volume at the source and connect the soundsystem again and
now can hear the music.
I think Adobe reduce the sound of the source at zero, and the imac
rest on the last position.
I'm right? Many Thanks in advance.

Hello,
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

[SOLVED] No sound after installing pulseaudio

Hi,
I recently installed pulseaudio to be able to use skype since their update to version 4.3.
I installed with additional stuff using the command:
$ sudo pacman -S pulseaudio pulseaudio-alsa pavucontrol lib32-libpulse
After installing I ran the commands:
$ pulseaudio -k
$ pulseaudio --start
At this point, skype and sound were working properly again.
After rebooting my computer, I completely lost the sound. I tried killing and restarting pulseaudio and reinstalled twice, but I never managed to have to sound back since...
Any suggestions?
Thank you for your help
Last edited by nocarch (2014-08-08 00:29:48)

What troubleshooting have you done?
Moving to NC...

Problems playing sound after installing 10.4.4

After installing 10.4.4 update, i have a problem when i play some mp3 file in itunes or quicktime 7.0.4, it sounds with jumps and cracking. I've reinstalled the update using the combo, repair permisions, reinstalled quicktime and nothing happens.
Any suggestion?
Thanx

After upgrading to OS 10.4.4 I have no startup chime or sound. I to tried changing the Audio MIDI Setup application (located in Applications/Utilities) and changing the output setting to different settings and back to 44 KHz (44100.0 Hz). It made no difference.iMac G5, 2.0, 20", 1.5g Mac OS X (10.4.4)
iMac G5, 2.0, 20", 1.5g Mac OS X (10.4.4)

No sound after installing windows 7 on HP Pavilion dv1710us Notebook PC

I recently helped my uncle install windows 7 on his HP Pavilion dv1710us Notebook PC
and there was no sound after installation.. i downloaded several drivers for the realtek high definition audio driver (R2.39, 38, 37, etc)
then i tried the original driver from the HP drivers page and installed it.
usually when there is no sound, there would be a red X on the volume icon, but when i installed the original driver from the HP drivers page, there was no more red X.. Thinking that the sound was fixed, I tried to go on youtube and watch a video... i see the green bar moving up and down on the volume slide, but then i can't hear anything.
So is there any realtek high definition audio driver compatible for windows 7 on the HP pavilion dv1710us?
Is there something I have to do, like right click on the application and then change compatibility settings?
thanks in advance.

I got it to work with windows 7 32 bit. I just went to hp website to support and downloads section. Type in your model number, then select windows xp as the operating system. Then download the audio driver and save it to your desktop. After the file is on your desktop you need to right click on it and click properties, then go to compatability tab and tell it to install as windows xp service pack 3. Hit apply then install. Hope it works for ya, worked for me.

[SOLVED] No Sound After Installing KDE

After installing KDE I have no sound.
Results of commands
lspci | grep Audio
gives
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
and
aplay -l
gives
aplay: device_list:256: no soundcards found...
Can someone help?
Last edited by vujke (2012-11-13 12:14:52)

Morn wrote:First I would run "lsmod" to check if the snd kernel modules are loaded…
Module Size Used by
rfcomm 33791 4
bnep 8857 2
snd_hda_codec_realtek 61193 1
btusb 12372 0
bluetooth 192120 22 bnep,btusb,rfcomm
snd_hda_intel 26180 0
snd_hda_codec 98033 2 snd_hda_codec_realtek,snd_hda_intel
rfkill 15604 2 bluetooth
snd_hwdep 6300 1 snd_hda_codec
snd_pcm 75167 2 snd_hda_codec,snd_hda_intel
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
coretemp 6070 0
kvm_intel 124749 0
kvm 373917 1 kvm_intel
snd_timer 18934 1 snd_pcm
snd 59989 6 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5442 1 snd
ppdev 5902 0
psmouse 71909 0
microcode 12377 0
parport_pc 30541 0
acpi_cpufreq 5933 1
mperf 1267 1 acpi_cpufreq
processor 26855 1 acpi_cpufreq
serio_raw 4689 0
pcspkr 1899 0
iTCO_wdt 5255 0
iTCO_vendor_support 1929 1 iTCO_wdt
lpc_ich 10609 0
parport 31363 2 ppdev,parport_pc
atl1c 33646 0
asus_atk0110 9824 0
evdev 10266 4
fuse 69173 8
vboxdrv 1823469 0
ext4 440434 2
crc16 1359 2 ext4,bluetooth
jbd2 78751 1 ext4
mbcache 5977 1 ext4
sr_mod 14823 0
cdrom 35520 1 sr_mod
sd_mod 29559 7
ata_generic 3338 0
pata_acpi 3451 0
uhci_hcd 23436 0
ata_piix 23352 5
libata 167683 3 pata_acpi,ata_generic,ata_piix
scsi_mod 133386 3 libata,sd_mod,sr_mod
ehci_hcd 41816 0
usbcore 150398 3 btusb,uhci_hcd,ehci_hcd
usb_common 954 1 usbcore
i915 495073 2
video 11276 1 i915
button 4662 1 i915
i2c_algo_bit 5391 1 i915
intel_agp 10744 1 i915
intel_gtt 15659 3 i915,intel_agp
drm_kms_helper 32877 1 i915
drm 218724 3 i915,drm_kms_helper
i2c_core 20707 4 drm,i915,drm_kms_helper,i2c_algo_bit
I would say it is.
Morn wrote:
By the way, I'm also having audio issues with KDE 4.9.3 now. I can play sound though, it's the mixer that's broken.
P.S. I could fix my issue in the KMix preferences. (The wrong audio interface had been selected since the upgrade.)
Do you think on Phonon preferences. If is, I got nothing to select.
Last edited by vujke (2012-11-11 22:50:35)

Is anyone else having issues with their sound after installing 10.9?

After installing Mavericks, if my computer goes to sleep, my sound stops working when it wakes up. Is anyone else having this issue? Is there a solution, is it an OS bug or is it something I can fix?

There are quite a number of people reporting this and there doesn't seem to be a permanent fix (other than rebooting and not letting your computer go back to sleep ) I'm sure it is on Apple's list of things to fix...and I know that's not of much immediate help.

No sound after installing new iphone software

sounds is no longer working after installing new iphone software.

Which sounds are not working, the ones on your Mac or the ones on your iPhone?
Allan

No sound after installing ios6.01

Hi and thank you for your time. After installing the ios6.01 update i lost my sound on apps and videos. I rang customer support and as i was talking to them it magically reappeared. And now i have lost it again. I have tried every trick i could find,restart phone, reset phone, restore factory settings, clean out the gunk in portals, do you have any suggestions on what it could be or how to fix?
i have never used headphones, it is not on silent mode. I need help ASAP (the main use of my iphone is for my sons videos who is autistic and it is no fun when they aren't working) PLEASE HELP ME!

hello, unfortunately this seems to be a bug in adobes flash plugin 11.3. please refer to the following forum entry on how to handle the issue or report the problem with your system details to adobe.
http://forums.adobe.com/message/4483563
https://bugbase.adobe.com/index.cfm?event=bug&id=3210964

No sound after installing window 8.1 on HP620 (64bits)

Hi,
please i need help. After installing window 8.1 on HP 620, i reinstalled all drivers but yet, No sound. i"ve checked device manager and all sound drivers seems to be working properly but i cant still hear anything. please i need help

The sound wont run on 4GB ram pc's and uptill now i dont know why hp or windows havent fixed this issue.
All you have to do is reduce your RAM
The proccess is as follow
windows key + run
type msonfig
on the boot tab click advanced options
check the box close to Maximum Memory
make the value to be 3GB(3096).
Click apply and ok.
Restart your pc
And there you are, your sounds are out as well as your headphone jack is working
Regards

No Sound after installing Xfce

Hello, I'm having a strange problem. After installing xfce I've got no sound in my system. I have an Asus Xonar DX and usually the only thing I needed to do after installing a new system was to select it in the audio controller but this time it doesn't work. I tried uninstalling xfce4-mixer and install paprefs pavucontrol and set the card there but it doesn' t work and I don't know what else to try.
http://i60.tinypic.com/6i6wcl.png
Any help would be really appreciated. Thanks.
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --

Herbalist wrote:Muting S/PDIF in alsamixer seemed to fix this problem as suggested in this thread https://bbs.archlinux.org/viewtopic.php?id=156502
How do I do that ?
http://es.tinypic.com/r/250nywj/8

No sound after installing 2.1 firmware

After installing the new 2.1 firmware on my 1G iPod touch I can´t listen sound from YouTube, music and FlyCast internet radio, but I can listen sound from games, somebody have this problem? Is the new firmware causing this problem?

did you ever get any support for this? how did you fix your 'no sound' problem?
i still have NO SOUND on my iTouch after installing 2.2 - the problem started with 2.1 when the volume control went haywire. now i have no sound and nobody has a solution.

No sound after installing W7

Similar Messages

Maybe you are looking for