No sound after installing XP on my second hand toshiba satellite.

Good day to you,
I have bought a second hand Laptop ,(Toshiba Satellite Modelnr SA 30-404   PSA30E-1kVSE-6K) Windows XP home was installed and was functioning. Now I have installed Windows XP PRO Sp2 and Office 2007.  The problem is that there is no sound anymore. In the device-list  there are yellow Questionmarks for Multimedia-audiocontroller  (Location PCI socket 0, device 31, function 5), PCI-modem(Location PCI socket 0, device 31,function 6) ,Videocontroller(Location PCI socket0 device 2 function 1) and Videocontroller(VGA-compatibel)( Location PCI socket 0, device 2 ,Function 0). I can not find the brand of the devices ,so I can not instal the drivers .The  automatic search on internet did not help.
I think I have to download drivers someware ,but my laptop is not in any list(anymore ?)
What to do ?
Jean
Toshiba Satellite SA30-404
PSA30E-1KVSE-6K
Windows XP PRO sp2

Satellite A30-404 (PSA30E-1KVSE-6K)
Jean, the sound driver for that European model is here.
   Realtek Sound Driver for Windows XP, 5.10.00.5210, 04/06/08
All the Toshiba drivers and utilities are here.
In case things don't work right, it's probably because the order of installation matters. I have attached the recommended order.
-Jerry
Attachments:
installation_order.txt ‏1 KB

Similar Messages

  • Portege 3110ct has no sound after installing XP Pro

    I'm a novice when it comes to laptops, so here is the problem: My 3110ct has no sound after installing XP Pro. Didn't have sound when I bought it with another operating system on, report says no sound device installed.
    Does this mean I need to get a chip for the laptop or is it a driver I need & where can I find the part or the driver for this.
    Please help.

    Usually if the sound driver was not installed you will get no sound but also a yellow exclamation mark should appear in the device manager.
    If the sound card chip is damage I presume you will be not able to see the yellow exclamation belonging to the sound card in the device manager.
    You bought this Portg as a second hand unit. Am I right?
    So possibly the sound card is faulty.
    The computer uses a ESS ES1978 (Maestro-2E) and ES1918 sound chip.
    Check if you can find an XP sound driver in the internet.

  • No sound after installing flash player 11.3.300.262, have mozilla 13.0.01, working fine with flash player 11.2.202.233

    Have no sound after installing flash player 11.3.300.262. Working fine with flash player 11.2.202.232

    hello, unfortunately this seems to be a bug in adobes flash plugin 11.3. please refer to the following forum entry on how to handle the issue or report the problem with your system details to adobe.
    http://forums.adobe.com/message/4483563
    https://bugbase.adobe.com/index.cfm?event=bug&id=3210964

  • No sound after installing windows 8 on my hp 620 help

    no sound after installing windows 8 on my hp 620 help
    This question was solved.
    View Solution.

    I cannot find your audio driver on HP's support page, but I was able to locate this one, which is the same driver as yours, just the most recent version. According to what is listed, it supports Windows 8. Give it a shot and let me know if it works for you.
    http://goo.gl/0IMBd
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Installed new hard drive in a Toshiba satellite and now cant do windows upadates

    installed new hard drive in a Toshiba satellite S500-02J . Used recovery stick purchased from Toshiba. Windows installed and everything up and running, but when I go to do a windows update. I received this message: "Windows update cannot currently check for updates, because the service is not running. You may need to restart your computer."
    Toshiba help line said it was a problem because new hard drive was not exactly the same as the old hard drive. It was a minor fix but wanted a $100 to perform the fix remotely.
    Any ideas on how to fix this problem?
    Thanks.

    satellite S500-02J
    Maybe this one from the land down under?
    Satellite A500/02J (PSAR9A-02J001)
    The probloem occurs because the new drive has advanced-format technology. All the new ones do. See this message from three years ago.
    The fix is to install a new storage driver.
       Intel Rapid Storage Technology
    If you've messed around with drivers, you'll probably need to repeat the restore. Introduce the storage driver as early as possible.
    -Jerry

  • Satellite U300 - 11y - No sound after installing win XP, SP3 rc1

    Finally got my U300 working with XP, but I can't get the sound working. Appropriate drivers are installed, but nothing. The hardware was working under Vista, so this seems to be a driver problem. I think the realtek installer for somereason doesn't completely finish the configuration.
    I followed advice as given on
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=99567 but no luck.
    Getting pretty nervous now, as I need sound for Skype in my business.
    Thanks guys,
    Tim
    Message was edited by: ADMIN

    Hi!
    I had the same problem when trying to install XP on my U300. I now regetfully deleted the files I used, which is a shame - I did not know others had similar problems.
    However, if my m serves me right, the second patch suggested by Pedro (KB835221) is the correct one.
    The first one is the theoretical fix for HD audio, but SP3 RC1 will not allow its installation, since it thinks the patch is older than the service pack itself.
    The second patch appears to be the same thing, but modified for SP3 to accept it.
    The second patch should work, and after installing it, you should be able to install the sound drivers normally.
    Hope this works for you!

  • NO SOUND AFTER INSTALLING WINDOWS 8.1

    Hi, I'm hoping someone will be able to help.  My sister has a compaq 58 laptop and after installing windows 8.1, now has no sound.  The sound was there when 8.1 was installed but after logging off and logging back on again, the sound disappeared.  We reinstalled windows 8.1 and same thing happened.  We have run scans and got sound again but once again logging off and logging back on again, the sound disappeared, very frustrating.
    The product code is DOX18ea#abu and serial number [edited Serial Number by Moderator]
    help would be much appreciated.

    Devina,  This seems to be a common problem with Windows 8.1. It does not save a working state when logging off. I was afraid to touch my pc when the AUDIO was in a working state. However Microsoft logged me off with no fear and did not save the working state. What a great "glutware" corp. Having said that when the AUDIO is working it appears to work great! Sure wish HP/MICROSOFT could get their act together. Can you say "BASE BAND" , "DSP", "FIR" ETC. Well they think they know the fancy stuff. Now if they could just get it to function for normal people. Can you say "KISS".
    ham123 ps: just send it back!! for total care!!!

  • No sound after installing Adobe Flash 11.7

    After installing the new Adobe Flash Player 11.7 I have no sound.
    I reinstalled, uninstalled and started the imac new but I find no solution.
    When I'm starting the imac, I always heard the opening sound.
    After searching and contacting the support with no results, I try to turn
    up the volume at the source and connect the soundsystem again and
    now can hear the music.
    I think Adobe reduce the sound of the source at zero, and the imac
    rest on the last position.
    I'm right? Many Thanks in advance.

    Hello,
    Long shot, but...
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

  • [SOLVED] No sound after installing pulseaudio

    Hi,
    I recently installed pulseaudio to be able to use skype since their update to version 4.3.
    I installed with additional stuff using the command:
    $ sudo pacman -S pulseaudio pulseaudio-alsa pavucontrol lib32-libpulse
    After installing I ran the commands:
    $ pulseaudio -k
    $ pulseaudio --start
    At this point, skype and sound were working properly again.
    After rebooting my computer, I completely lost the sound. I tried killing and restarting pulseaudio and reinstalled twice, but I never managed to have to sound back since...
    Any suggestions?
    Thank you for your help
    Last edited by nocarch (2014-08-08 00:29:48)

    What troubleshooting have you done?
    Moving to NC...

  • Problems playing sound after installing 10.4.4

    After installing 10.4.4 update, i have a problem when i play some mp3 file in itunes or quicktime 7.0.4, it sounds with jumps and cracking. I've reinstalled the update using the combo, repair permisions, reinstalled quicktime and nothing happens.
    Any suggestion?
    Thanx

    After upgrading to OS 10.4.4 I have no startup chime or sound. I to tried changing the Audio MIDI Setup application (located in Applications/Utilities) and changing the output setting to different settings and back to 44 KHz (44100.0 Hz). It made no difference.iMac G5, 2.0, 20", 1.5g Mac OS X (10.4.4)
    iMac G5, 2.0, 20", 1.5g   Mac OS X (10.4.4)  

  • No sound after installing windows 7 on HP Pavilion dv1710us Notebook PC

    I recently helped my uncle install windows 7 on his HP Pavilion dv1710us Notebook PC
    and there was no sound after installation.. i downloaded several drivers for the realtek high definition audio driver (R2.39, 38, 37, etc)
    then i tried the original driver from the HP drivers page and installed it.
    usually when there is no sound, there would be a red X on the volume icon, but when i installed the original driver from the HP drivers page, there was no more red X.. Thinking that the sound was fixed, I tried to go on youtube and watch a video... i see the green bar moving up and down on the volume slide, but then i can't hear anything.
    So is there any realtek high definition audio driver compatible for windows 7 on the HP pavilion dv1710us?
    Is there something I have to do, like right click on the application and then change compatibility settings?
    thanks in advance.

    I got it to work with windows 7 32 bit. I just went to hp website to support and downloads section. Type in your model number, then select windows xp as the operating system. Then download the audio driver and save it to your desktop. After the file is on your desktop you need to right click on it and click properties, then go to compatability tab and tell it to install as windows xp service pack 3. Hit apply then install. Hope it works for ya, worked for me.

  • [SOLVED] No Sound After Installing KDE

    After installing KDE I have no sound.
    Results of commands
    lspci | grep Audio
    gives
    00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
    and
    aplay -l
    gives
    aplay: device_list:256: no soundcards found...
    Can someone help?
    Last edited by vujke (2012-11-13 12:14:52)

    Morn wrote:First I would run "lsmod" to check if the snd kernel modules are loaded…
    Module Size Used by
    rfcomm 33791 4
    bnep 8857 2
    snd_hda_codec_realtek 61193 1
    btusb 12372 0
    bluetooth 192120 22 bnep,btusb,rfcomm
    snd_hda_intel 26180 0
    snd_hda_codec 98033 2 snd_hda_codec_realtek,snd_hda_intel
    rfkill 15604 2 bluetooth
    snd_hwdep 6300 1 snd_hda_codec
    snd_pcm 75167 2 snd_hda_codec,snd_hda_intel
    snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
    coretemp 6070 0
    kvm_intel 124749 0
    kvm 373917 1 kvm_intel
    snd_timer 18934 1 snd_pcm
    snd 59989 6 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
    soundcore 5442 1 snd
    ppdev 5902 0
    psmouse 71909 0
    microcode 12377 0
    parport_pc 30541 0
    acpi_cpufreq 5933 1
    mperf 1267 1 acpi_cpufreq
    processor 26855 1 acpi_cpufreq
    serio_raw 4689 0
    pcspkr 1899 0
    iTCO_wdt 5255 0
    iTCO_vendor_support 1929 1 iTCO_wdt
    lpc_ich 10609 0
    parport 31363 2 ppdev,parport_pc
    atl1c 33646 0
    asus_atk0110 9824 0
    evdev 10266 4
    fuse 69173 8
    vboxdrv 1823469 0
    ext4 440434 2
    crc16 1359 2 ext4,bluetooth
    jbd2 78751 1 ext4
    mbcache 5977 1 ext4
    sr_mod 14823 0
    cdrom 35520 1 sr_mod
    sd_mod 29559 7
    ata_generic 3338 0
    pata_acpi 3451 0
    uhci_hcd 23436 0
    ata_piix 23352 5
    libata 167683 3 pata_acpi,ata_generic,ata_piix
    scsi_mod 133386 3 libata,sd_mod,sr_mod
    ehci_hcd 41816 0
    usbcore 150398 3 btusb,uhci_hcd,ehci_hcd
    usb_common 954 1 usbcore
    i915 495073 2
    video 11276 1 i915
    button 4662 1 i915
    i2c_algo_bit 5391 1 i915
    intel_agp 10744 1 i915
    intel_gtt 15659 3 i915,intel_agp
    drm_kms_helper 32877 1 i915
    drm 218724 3 i915,drm_kms_helper
    i2c_core 20707 4 drm,i915,drm_kms_helper,i2c_algo_bit
    I would say it is.
    Morn wrote:
    By the way, I'm also having audio issues with KDE 4.9.3 now. I can play sound though, it's the mixer that's broken.
    P.S. I could fix my issue in the KMix preferences. (The wrong audio interface had been selected since the upgrade.)
    Do you think on Phonon preferences. If is, I got nothing to select.
    Last edited by vujke (2012-11-11 22:50:35)

  • Is anyone else having issues with their sound after installing 10.9?

    After installing Mavericks, if my computer goes to sleep, my sound stops working when it wakes up.  Is anyone else having this issue?  Is there a solution, is it an OS bug or is it something I can fix? 

    There are quite a number of people reporting this and there doesn't seem to be a permanent fix (other than rebooting and not letting your computer go back to sleep ) I'm sure it is on Apple's list of things to fix...and I know that's not of much immediate help.

  • No sound after installing new iphone software

    sounds is no longer working after installing new iphone software.

    Which sounds are not working, the ones on your Mac or the ones on your iPhone?
    Allan

  • No sound after installing ios6.01

    Hi and thank you for your time. After installing the ios6.01 update i lost my sound on apps and videos. I rang customer support and as i was talking to them it magically reappeared. And now i have lost it again. I have tried every trick i could find,restart phone, reset phone, restore factory settings, clean out the gunk in portals, do you have any suggestions on what it could be or how to fix?
    i have never used headphones, it is not on silent mode. I need help ASAP (the main use of my iphone is for my sons videos who is autistic and it is no fun when they aren't working) PLEASE HELP ME!

    hello, unfortunately this seems to be a bug in adobes flash plugin 11.3. please refer to the following forum entry on how to handle the issue or report the problem with your system details to adobe.
    http://forums.adobe.com/message/4483563
    https://bugbase.adobe.com/index.cfm?event=bug&id=3210964

Maybe you are looking for

  • How do you display a loaded picture ?

    Hi, I have a ByteArray variable which contains a JPEG picture and I am looking for the best way to display it. I have tried to feed it to an Image source by setting the variable as bindable but the only result is the "broken image" icon. Cheers, zimb

  • Msi pro-e mb possibly keeping psu fan on?

    Hello all, fresh i7920 build with msi pro-e mb, corsair xms3 6gb, and a corsair tx750w psu.  The problem i'm having is when i power down the system for the night the psu fan will continue to run all night long even though the system if off(not in sle

  • Copying non-itunes files from iphone to itunes

    how can i copy files not purchased from itunes that are on my iphone to a new itunes library floowing a computer crash

  • Quartz Composer Files not opening

    Hi, I am new to Quartz Composer. I hope I am posting this query in the right area. Browsing the net to get info on doing motion detection with QC, I have come across a number of downloadable sample compositions. However, when clicked on, the followin

  • How can I store Attributes?

    I use 'Oracle 8i' and 'XML SQL Utility for java'. I can store XML Elements to DB Table, but can't XML Attributes. The file if following.. ================================= <?xml version="1.0"?> <!DOCTYPE employee [ <!ELEMENT employee (Name, Dept, Tit