No sound after installing XP-sp2 on U300
Hellllo I'm newbie...... I have a u300 laptop. I changed my OS to XP. I completelly format drives and then I install new XP-sp2. After that I downloaded all the appropriate drivers from the toshiba website. All the hardware perfectly works except sound. I just search the toshiba forum and others have these problem tooo. As per the thechs I download the patch(microsoft ) but no use... please help me by giving a good answer quickly regards--- achu
Satellite U300-111
Is this the driver you tried?
Realtek Sound Driver for Windows XP, 5.10.0.5413, 04/12/07
sound-20070828123958.zip
If so, perhaps you installed them in the wrong order. You should install the chipset and then the display driver before the sound.
-Jerry
Similar Messages
-
No Sound After Installing Vista SP2
I installed with Vista SP2 update yesterday and now I have no sound. It seems to be a driver problem but updating the driver does not fix it. There is a red "x" by the speaker icon on the task bar and the volume buttons on my keyboard dont work.
The Conexant HD audio driver says that it is installed properly but I have no volume.
Microsoft seems to be aware of this problems and has a few fixes out (like http://support.microsoft.com/kb/948481/) but nothing they have published is helping me.
Please help as I really need to have my sound up.This message can be closed - though, not sure if I am able to do myself. I uninstalled the IDT Codec, did a full shutdown, then started back up, let windows fully load, was prompted for installing of the Codec by Windows, clicked to allow the installation to occur and the codec/driver was successfully installed. I have my sound back! Fantastic!
-
Have no sound after installing flash player 11.3.300.262. Working fine with flash player 11.2.202.232
hello, unfortunately this seems to be a bug in adobes flash plugin 11.3. please refer to the following forum entry on how to handle the issue or report the problem with your system details to adobe.
http://forums.adobe.com/message/4483563
https://bugbase.adobe.com/index.cfm?event=bug&id=3210964 -
Portege 3110ct has no sound after installing XP Pro
I'm a novice when it comes to laptops, so here is the problem: My 3110ct has no sound after installing XP Pro. Didn't have sound when I bought it with another operating system on, report says no sound device installed.
Does this mean I need to get a chip for the laptop or is it a driver I need & where can I find the part or the driver for this.
Please help.Usually if the sound driver was not installed you will get no sound but also a yellow exclamation mark should appear in the device manager.
If the sound card chip is damage I presume you will be not able to see the yellow exclamation belonging to the sound card in the device manager.
You bought this Portg as a second hand unit. Am I right?
So possibly the sound card is faulty.
The computer uses a ESS ES1978 (Maestro-2E) and ES1918 sound chip.
Check if you can find an XP sound driver in the internet. -
No sound after installing windows 8 on my hp 620 help
no sound after installing windows 8 on my hp 620 help
This question was solved.
View Solution.I cannot find your audio driver on HP's support page, but I was able to locate this one, which is the same driver as yours, just the most recent version. According to what is listed, it supports Windows 8. Give it a shot and let me know if it works for you.
http://goo.gl/0IMBd
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
Satellite U300 - 11y - No sound after installing win XP, SP3 rc1
Finally got my U300 working with XP, but I can't get the sound working. Appropriate drivers are installed, but nothing. The hardware was working under Vista, so this seems to be a driver problem. I think the realtek installer for somereason doesn't completely finish the configuration.
I followed advice as given on
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=99567 but no luck.
Getting pretty nervous now, as I need sound for Skype in my business.
Thanks guys,
Tim
Message was edited by: ADMINHi!
I had the same problem when trying to install XP on my U300. I now regetfully deleted the files I used, which is a shame - I did not know others had similar problems.
However, if my m serves me right, the second patch suggested by Pedro (KB835221) is the correct one.
The first one is the theoretical fix for HD audio, but SP3 RC1 will not allow its installation, since it thinks the patch is older than the service pack itself.
The second patch appears to be the same thing, but modified for SP3 to accept it.
The second patch should work, and after installing it, you should be able to install the sound drivers normally.
Hope this works for you! -
NO SOUND AFTER INSTALLING WINDOWS 8.1
Hi, I'm hoping someone will be able to help. My sister has a compaq 58 laptop and after installing windows 8.1, now has no sound. The sound was there when 8.1 was installed but after logging off and logging back on again, the sound disappeared. We reinstalled windows 8.1 and same thing happened. We have run scans and got sound again but once again logging off and logging back on again, the sound disappeared, very frustrating.
The product code is DOX18ea#abu and serial number [edited Serial Number by Moderator]
help would be much appreciated.Devina, This seems to be a common problem with Windows 8.1. It does not save a working state when logging off. I was afraid to touch my pc when the AUDIO was in a working state. However Microsoft logged me off with no fear and did not save the working state. What a great "glutware" corp. Having said that when the AUDIO is working it appears to work great! Sure wish HP/MICROSOFT could get their act together. Can you say "BASE BAND" , "DSP", "FIR" ETC. Well they think they know the fancy stuff. Now if they could just get it to function for normal people. Can you say "KISS".
ham123 ps: just send it back!! for total care!!! -
No sound after installing Adobe Flash 11.7
After installing the new Adobe Flash Player 11.7 I have no sound.
I reinstalled, uninstalled and started the imac new but I find no solution.
When I'm starting the imac, I always heard the opening sound.
After searching and contacting the support with no results, I try to turn
up the volume at the source and connect the soundsystem again and
now can hear the music.
I think Adobe reduce the sound of the source at zero, and the imac
rest on the last position.
I'm right? Many Thanks in advance.Hello,
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back. -
[SOLVED] No sound after installing pulseaudio
Hi,
I recently installed pulseaudio to be able to use skype since their update to version 4.3.
I installed with additional stuff using the command:
$ sudo pacman -S pulseaudio pulseaudio-alsa pavucontrol lib32-libpulse
After installing I ran the commands:
$ pulseaudio -k
$ pulseaudio --start
At this point, skype and sound were working properly again.
After rebooting my computer, I completely lost the sound. I tried killing and restarting pulseaudio and reinstalled twice, but I never managed to have to sound back since...
Any suggestions?
Thank you for your help
Last edited by nocarch (2014-08-08 00:29:48)What troubleshooting have you done?
Moving to NC... -
DW CS3 preview issue after installing Vista SP2
I have DW CS3 installed on my desktop and laptop computers. One computer uses vista64 and the other vista32. After installing vista service pack 2, I now have the following issue previewing PHP pages under Apache: All browsers give me a "cannot display the webpage" error UNLESS I am connected to some kind of network--it could be the internet or my peer-to-peer network. My destop computer is attached to a printer via RJ45 cable. If the printer is turned on, I can preview webpages in DW. If the printer is turned off, I cannot! Or, if I am connected to the internet through my wireless internet card, I can preview pages, otherwise, not.
Previous to installing SP2, I was able to preview pages on both computers without the need to be connected to a network, so I am pretty sure that SP2 is involved in this new issue.
When Apache and MySQL start up in the XAMPP control panel, there are no errors, and I can go into PHPMyAdmin just fine.
Has anyone else run into this? Any thoughts?I'm just following up here. I have not solved the issue, but I did figure out that the problem isn't with vista service pack 2 but with Kaspersky anti-virus 2009.
-
Problems playing sound after installing 10.4.4
After installing 10.4.4 update, i have a problem when i play some mp3 file in itunes or quicktime 7.0.4, it sounds with jumps and cracking. I've reinstalled the update using the combo, repair permisions, reinstalled quicktime and nothing happens.
Any suggestion?
ThanxAfter upgrading to OS 10.4.4 I have no startup chime or sound. I to tried changing the Audio MIDI Setup application (located in Applications/Utilities) and changing the output setting to different settings and back to 44 KHz (44100.0 Hz). It made no difference.iMac G5, 2.0, 20", 1.5g Mac OS X (10.4.4)
iMac G5, 2.0, 20", 1.5g Mac OS X (10.4.4) -
No sound after installing windows 7 on HP Pavilion dv1710us Notebook PC
I recently helped my uncle install windows 7 on his HP Pavilion dv1710us Notebook PC
and there was no sound after installation.. i downloaded several drivers for the realtek high definition audio driver (R2.39, 38, 37, etc)
then i tried the original driver from the HP drivers page and installed it.
usually when there is no sound, there would be a red X on the volume icon, but when i installed the original driver from the HP drivers page, there was no more red X.. Thinking that the sound was fixed, I tried to go on youtube and watch a video... i see the green bar moving up and down on the volume slide, but then i can't hear anything.
So is there any realtek high definition audio driver compatible for windows 7 on the HP pavilion dv1710us?
Is there something I have to do, like right click on the application and then change compatibility settings?
thanks in advance.I got it to work with windows 7 32 bit. I just went to hp website to support and downloads section. Type in your model number, then select windows xp as the operating system. Then download the audio driver and save it to your desktop. After the file is on your desktop you need to right click on it and click properties, then go to compatability tab and tell it to install as windows xp service pack 3. Hit apply then install. Hope it works for ya, worked for me.
-
[SOLVED] No Sound After Installing KDE
After installing KDE I have no sound.
Results of commands
lspci | grep Audio
gives
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
and
aplay -l
gives
aplay: device_list:256: no soundcards found...
Can someone help?
Last edited by vujke (2012-11-13 12:14:52)Morn wrote:First I would run "lsmod" to check if the snd kernel modules are loaded…
Module Size Used by
rfcomm 33791 4
bnep 8857 2
snd_hda_codec_realtek 61193 1
btusb 12372 0
bluetooth 192120 22 bnep,btusb,rfcomm
snd_hda_intel 26180 0
snd_hda_codec 98033 2 snd_hda_codec_realtek,snd_hda_intel
rfkill 15604 2 bluetooth
snd_hwdep 6300 1 snd_hda_codec
snd_pcm 75167 2 snd_hda_codec,snd_hda_intel
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
coretemp 6070 0
kvm_intel 124749 0
kvm 373917 1 kvm_intel
snd_timer 18934 1 snd_pcm
snd 59989 6 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5442 1 snd
ppdev 5902 0
psmouse 71909 0
microcode 12377 0
parport_pc 30541 0
acpi_cpufreq 5933 1
mperf 1267 1 acpi_cpufreq
processor 26855 1 acpi_cpufreq
serio_raw 4689 0
pcspkr 1899 0
iTCO_wdt 5255 0
iTCO_vendor_support 1929 1 iTCO_wdt
lpc_ich 10609 0
parport 31363 2 ppdev,parport_pc
atl1c 33646 0
asus_atk0110 9824 0
evdev 10266 4
fuse 69173 8
vboxdrv 1823469 0
ext4 440434 2
crc16 1359 2 ext4,bluetooth
jbd2 78751 1 ext4
mbcache 5977 1 ext4
sr_mod 14823 0
cdrom 35520 1 sr_mod
sd_mod 29559 7
ata_generic 3338 0
pata_acpi 3451 0
uhci_hcd 23436 0
ata_piix 23352 5
libata 167683 3 pata_acpi,ata_generic,ata_piix
scsi_mod 133386 3 libata,sd_mod,sr_mod
ehci_hcd 41816 0
usbcore 150398 3 btusb,uhci_hcd,ehci_hcd
usb_common 954 1 usbcore
i915 495073 2
video 11276 1 i915
button 4662 1 i915
i2c_algo_bit 5391 1 i915
intel_agp 10744 1 i915
intel_gtt 15659 3 i915,intel_agp
drm_kms_helper 32877 1 i915
drm 218724 3 i915,drm_kms_helper
i2c_core 20707 4 drm,i915,drm_kms_helper,i2c_algo_bit
I would say it is.
Morn wrote:
By the way, I'm also having audio issues with KDE 4.9.3 now. I can play sound though, it's the mixer that's broken.
P.S. I could fix my issue in the KMix preferences. (The wrong audio interface had been selected since the upgrade.)
Do you think on Phonon preferences. If is, I got nothing to select.
Last edited by vujke (2012-11-11 22:50:35) -
Is anyone else having issues with their sound after installing 10.9?
After installing Mavericks, if my computer goes to sleep, my sound stops working when it wakes up. Is anyone else having this issue? Is there a solution, is it an OS bug or is it something I can fix?
There are quite a number of people reporting this and there doesn't seem to be a permanent fix (other than rebooting and not letting your computer go back to sleep ) I'm sure it is on Apple's list of things to fix...and I know that's not of much immediate help.
-
No sound after installing new iphone software
sounds is no longer working after installing new iphone software.
Which sounds are not working, the ones on your Mac or the ones on your iPhone?
Allan
Maybe you are looking for
-
ConnectionCacheName not read from data-sources.xml
I created a simple web application to test the use of the ConnectionCacheBean (from the jdbc 3.0 examples page). I read through the code and some other articles regarding data sources and noted that you "should" be able to set the connection cache na
-
HELP! I think I might be in trouble unless someone brilliant can help. I'm working with a flash template that loads external images and text using an xml file. Everything works well the only problem is I've promised a client that as well as a "title"
-
Return year, quarter, month and week from a date
I use this to convert a date filed to year_week, year_month, year_quarter and year. But when I use it in views I got problem with queries, they take long time... Is this the best way to do this? Select to_char(rec_date, 'yyyy') || to_char(rec_date,
-
Perform rollback occurs during initial load of material
Hi Gurus, When we try to do the initial load of materials, only some part of the materials are replicated to SRM. We have the R3AC1 filter of taking only the materials with Purchasing view. We have no other filter. Although there are 576 materials th
-
I forget my security answers and i tried to rest them by sending an email but, i can't get the email. What should i do?