No sound after ios7.0.6 update!

Updated to ios7.0.6 now no sound on anything and it's all switched on checked everything! Music works but that's it anybody had the same problem tried to contact support but they want £25!!!

Try
settings
general
reset
reset all settings
You'll need to retweak your device but that often helps with sound issues

Similar Messages

TS1559 I have 4s. After I updated ios7.0.3 my wifi is geyed out. I expected after ios7.0.4 update wifi will work again, but does not. It annoying, because I have to use my data... Does anyone know when it will be fixed or does anyone have the same problem

I have 4s. After I updated ios7.0.3 my wifi is geyed out. I expected after ios7.0.4 update wifi will work again, but does not. It annoying, because I have to use my data... Does anyone know when it will be fixed or does anyone have the same problem?

I have the same problem. After the upgrade, my wifi is greyed out, and the battery won't hold a charge long. I reset all the settings, tried all the things suggested by Apple, but it didn't work. I took the phone to Verizon, but they said they can't fix it, go to Apple
I made an appointment at the Genius bar, where the staff was incredibly rude and dismissive. A representative told me that the wi-fi is broken and I would need to buy a new phone for $200, because mine is out of warranty. I'm due for an upgrade in a few months, so I'm not going to pay $200 for another 4S now. I'm also not going to buy any more Apple products. Their upgrade caused this problem, and they are not standing behind their producet.

No sound after IOS 4.1 update

I really hope someone can suggest a solution. I updated my iPhone 3G to IOS 4.1 earlier today and since the I have lost all sound - no keyboard clicks, music or alerts. Has anyone else experienced this and could you offer a suggestion?
Many thanks

No sound for my iPhone 3G after iOS 4.1 update! Restored back to 3.1.2. Still no sound! (befor the 4.1 update, everything was fine).
Then I reset all settings, sound came back. But then iPhone started to freeze randomly, with increasing frequency to the point I needed to restore again. This time back to iOS 4.1. And guess what - no sound! Resetted all settings. Still no sound.
Key points:
* sound loss is software issue that came with iOS 4. (i was able to get sound back after settings reset but only on iOS 3.1)
* iOS 4.1 makes iPhone unstable both on 4.1 and earlier versions.
* restore has no effect (I never restored from backup, started as a fresh phone)
* iOS 4.1 destroys your iPhone 3G

Ringer has no sound after ios7 upgrade

Ringer has no sound after ios 7 upgrade

Did you figure out how to fix this problem because I have the same problem and I am very upset. My daughter was sick and the school called and because of this problem I missed the call.

No web sound after 10.4.7 update

I am unable to get any web based sound,either on safari, firefox or netscape. No sound on quick time, windows media player or real player. Alert tones work, Itunes work, just nothing from the internet. This began imeadtaely after the last 10.4.7 update. Apple care was unable to help with this situation. All sounds works on the windows side, just not on the Mac side. THIS IS GETTING VERY FRUSTRATING! Is this happening to anyone else? Are there any solutions to this problem?
Tristanreisfar
Mac Mini Mac OS X (10.4.7)

wow, that is very strange...well, i think that you should do a fresh reinstall of Mac OSX and only upgrade to 10.4.6 and then wait for 10.4.8...don't worry, this isn't that big of an update
 Mac Mini Intel Core Solo- 1 GB RAM- Superdrive- Production week 18 Mac OS X (10.4.7)

IPad Air - no ringer sounds after ios 8.3 update

since updating to ios 8.3, my iPad Air has no notification or ringer sounds on apps. eg I'm unable to use the Alarmed app as there's no sound. The volume works ok on music and movies.
For 2 days after the update, the home screen showed the Ringer icon flashing On and Off on the home screen when I woke the iPad up. (it's stopped this although the fault remains).
I have held the home and power button and rebooted, but this doesn't solve the issue.
Any suggestions please?
I only updated from iOS 7 recently as was trying to avoid the dreaded update bugs....iOS 7 crashed. So does 8.3.

I'm not 100% sure that I know what you mean by "reset/restore." If it has NEVER been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this.

No sound after 10.4.6 update

hi everyone
Last thursday I installed the update 10.4.6 for PowerPC and after it, my ibook has no sound. At startup I can hear the "daannn" (sound at startup), but when Mac OS X is ready, has no sound, no microphone, nothing!
A strange thing is that in the System Preferences>Sound panel appears no input/output devices connected (that is, it does not recognize them). I think that is strange because at startup I can hear that sound and if was a hardware problem, that would not happen (I think).
I restarted the system over and over, I tried to re-install
the update, but nothing happened...just not sound
Somebody can help me?
ibook G4 Mac OS X (10.4.6)

The "Archive and Install" option is used when the data on a computer isn't backed up. The data (the old copy of the OS and any documents on the computer) is stored on a portion of the drive and the new OS is installed. The old data can be accessed from the new system-->It's stored in a folder in the new OS.
Anyway! I'm not sure of the steps, but here's a few links to check out. You might want to print out the documents so you can refer to them as you work.
About "Archive and Install"
Installation Options in Tiger
If you need more help, post back and I'll do my best to clear things up!
~Lyssa
~iBook G4 1.07GHz (Kaiya), with extra 256MB RAM ~and a red Apple logo~(Mac OS X 10.3.9)~ LaCie 160GB external hard drive~ ~3G 15GB iPod (Nakai)~ ~GiveStarsto users who earn them.~

Screen flashes instead of alert sound after 10.4.11 update

After updating to 10.4.11 about 2 weeks ago I noticed that my screen flashes whenever an alert sound should occur. It looks just like the "Flash screen when an alert sound occurs" option found in the Universal Access (Hearing) settings. I toggled the setting found there, but even when it's set to off, my flashing screen alert continues to occur. I know a friend of mine who experienced the exact same problem, but he hasn't found a solution to this (minor, but annoying) problem yet either. I also talked to a "genius" at the local Apple store. He hadn't heard about the problem and couldn't offer a solution either.
Is anybody else experiencing a flashing screen alert? How does one get rid of it? Thanks.

this solved it for me:
i checked my system alerts and found that the alert sound was set to some invalid legacy sound called AIM - probably left over from when i used AIM instead of iChat.
i set the alert sound back to one of the original Apple sounds and viola! No More Flashing Screen!!!

TS1702 apps words with friends want orient on screen and whats that phrase want open after ios7 install and update?

after installing ios7 apps words with friends want orient to screen correctly and whats that phrase want open if deleted and reinstalled will games and points be lost?

Security Issue: Update your Flash Player '''v16.0.0.296<br>https://www.adobe.com/products/flashplayer/distribution3.html'''
Start '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in Safe Mode]''' {web Link} by holding down the '''<Shift ''(Mac Options)'' >''' key, and then starting Firefox. Is the problem still there?
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.

No sound after 10.5.6 update

I have a Mac mini 2GHz, 2GB RAM, & use a MiniStacker as the start up drive. After installing the update from Software Update:
There was a startup sound from the computer at restart but no sound on the system after everything finished loading.
System sounds are grayed out in Sound Preferences.
No output devices found
No input devices found
When 'Show volume in menu bar' is checked, it makes a blank space in the menu bar. Clicking on that space causes everything on that side of the menu bar to disappear then come back.
I repaired permissions but it didn't help. I trashed sound preference files & rebooted but still no sound.
I downloaded the combo updated & installed it but the problem persists.
10.5.6 broke the sound on my Mac mini.

That was a very serendipitous finding!
Command-option-P-N worked for me too - but zapping the PRAM (command-option-P-R), which I tried first, did NOT work.
After the initial failure with Software Update, I retreated to 10.5.5 and downloaded the Combo update in case I had to experiment, but the use of the combo had no effect on the loss of sound. I will be saving it just in case!
I had also repaired permissions before applying the update - this produced a mighty list of repairs but also had no effect on the no sound problem.
I am using an Intel 20" iMac, almost exactly a year old.
I would be very interested to hear why a few of us have had this problem, if anyone ever finds out. And an explanation as to why booting into safe mode fixes it would be reassuring...

Occasional soft sound after Windows 8.1 update

Hi,
I have a strange problem. I updated to Windows 8.1 about two weeks ago. For about a week now I have noticed that occasionally my sound drops. I usually watch shows or something on say 20 volume. The sound suddenly drops and I have to turn it all the way up to 100 to get the same volume as on 20. I reboot my PC (which takes quite long now. seems I should have not updated as it came with a lot of bugs...) I did not make any changes myself and did not install new sound drivers.
Also, my charm bar stops working so that also takes a reboot to fix....
I am running Windows 8.4 64-Bit on an HP Envy 15 j063ei.
Has anyone else seen this, or know how to fix it? I am hoping there is a way to fix it that does not help refreshing my Windows because I really do not want to install all my apps and games again. I already had to do that once before.

HI Gan_Javi,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP ENVY 15-j063ei Notebook and issues after an update. You might need to check for updates from Windows. Here is how to do that.
Click the Windows key and type change PC settings, and click Update and recovery.
click Check now, and then wait while Windows looks for the latest updates. You can also do this from the HP site under Detect my product click on the Find now button. If updates are found, click Install updates. To make sure all updates are completed restart your computer twice.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

IPhone 3Gs no sound after 6.1.3 update

So I was just playing some music with my iPhone 3Gs when suddenly the sound goes off.. there was nothing.. even keyboard ticks everything theres no sound..
The sound works in earphones and also in calls (earpiece) but the speakers are not working..
I've searched the forum and other people have simillar problem with their iPhones 4, 4s and 5 running in 6.1.3.. The only solution they said was giving it to a local apple store.. but my warranty has expired and the apple store in my place is far away..
The volume bar is showing.. I can slide the volumes still.. no sound
I already tried to restore.. but still no luck of having sound..
Can someone please help.. cuz i know 6.1.3 is the last iOS in 3Gs.. and I dont wanna buy a new one..

I have an i-phone5 after software update 6.1.3 i have no sound form either music ringtones and calls. I have to use my head set. I called Apple and they just gave me a solution, go to the apple store? I am with out a phone. I payed $800.00 for this I-phone 5.

No sound after 10.6.2 update

Hello,
After updating to 10.6.2 my MBP 15 2.66Ghz no longer plays sounds from YouTube, iTunes, Spotify, VLC, etc, only the system default sounds like when you move a file to the trash! Besides I've noticed that when I turn my sound down or up via keyboard I get no sound feedback.
Any ideas?
Sorry for my bad english.
Thank you!

Ok, I do not have anything wrong with my volume, persay. But I plug in my headphones, and it will go down. Due to the headphone adjustments, but then when I am done with the headphones. It stays at a lower volume! With 10.6 and 10.6.1, I did that and it will go back to normal... is this a bug too?

[Solved] No Sound after Windows 8.1 Update

I have an MSI GE70 and after updating to Windows 8.1 I can not get sound from any source.
I have tried updating drivers through windows automatic system and then through the MSI website. However no change.
Any ideas how to restore sound, without having to entirely reinstall Windows 8 and avoid updating to Windows 8.1?
Thanks,
Richard

I've resolved the issue for me. Instead of installing the drivers from MEI website. I got them from here:
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS035939
Whether there is any long term effects of installing the sound drivers from a different company remains to be seen, but I have got my sound back. Hope this may help others who may experience the same issues.
Thanks for help,
Richard

No sound after 4.4.4 update

I just updated my 2nd gen Apple TV to 4.4.4 and no there is no sound. Any help would be appreciated. Thanks.

I've been trying for weeks to get my optical audio out to work after updateing to 4.4.4 and nothing I have tried works. I was listening to music videos and in between videos I updated the ATV and when it was done the sound was gone! I've tried all combinations of Dolby settings, HDMI settings, TV on, TV off, unplugged the ATV, nothing.... Sound through the TV via HDMI works just fine, it's just the optical output that has stopped. I'm stumped!

No sound after ios7.0.6 update!

Similar Messages

Maybe you are looking for