No Sound after Leopard

I have just bought a iBook G4 & have upgraded it to Leopard with after the software update is now running 10.5.4
I have noticed that the volume control in the menu bar is missing & using the F3 to F5 keys to control the volume brings up the on screen speaker icon with a circle with a line running through it.
Going into system preferances show no output device found. Yet if i go into system profiler the sound card is shown as a texas instruments card tas3004.
This iBook audio was running fine under tiger & also on Leopard 10.5.1 but since 10.5.4 the sound has no gone. Anyone know what the cause could be.
Thanks

Hi dazchelt and welcome to Apple Discussions.
There seems to be quite a few people with this problem over on the Leopard forum with no definitive answer (not that I have found, anyway)
However, if you haven't already, try a restart or two.
Then try Starting up in Safe Mode.
Safe Boot takes longer than normal startup.
Then do a normal restart.
If that doesn't work try Resetting PRAM/NVRAM.
If that doesn't work try Resetting the Power Management Unit (PMU).
Good luck and post back with how things go,
Adrian

Similar Messages

No sound after Leopard upgrade PB 15 inch PPC

I recently upgraded my PB 15-inch PPC to Leopard. Installed upgrades to 10.5.8. Now I have no sound in iTunes 10. I understand from reading other sources this is a common problem. Is there a permanent fix? Note.... PPC, therefore I cannot upgrade to Snow Leopard. Anyone tried going back to iTunes 9? (My next attempt to get sound back.) I honestly see absolutely no advantage to using Leopard. If there is no permanent fix for the sound problem, then its back to Tiger!

I'd just like to say I'm also experiencing this problem. So far the <ctrl><option>+pr reboot has worked for me every time it's occurred. Nonetheless I sincerely hope a fix will be available from Apple soon so that I (we) don't have to rely on clunky work-arounds anymore.
Regards,
Message was edited by: Sorry, I didn't mean to post in this thread. Quicktime is working fine for me. My apologies.

Lack of sound after Window 7 (64) installation into iMac OX 10.6.7. Tried to install driver from Snow Lepard disc (Cirrus 64).Wizard installed driver. No sound, Device Manager indicated that "driver is not installed" but also that the"device is working"

I don't know how to proceed. I didn't have sound after installing Windows 7 inot iMac OX 10.6.7 (64bit) After unsuccessful attempt to upgrade the driver from the BootCamp file, I deleted the driver from the Sound and Game controlled hoping that I would allow me to automatically install the correct driver from Boot camp.
Now the Sound Video Game controller disappeared from the Device Manager
How can I find out which is the correct sound driver for my computer (The Speaker Properties only say:WIndows)?
How can I install it without seing the Sound and Game controller in the Device Manager?

When you say "manually download", you mean from the BootCamp File on Snow Leopard, or from the Internet.
My additional problem is that the "Sound and Video Game Controller" disappeared from the Device Manager when I removed the previous driver. I don't find the place where I can reistall the new driver.

No sound after upgrading to Windows 7 M55-S3293

I upgraded to Windows 7 and installed the drivers from Toshiba for my sound card and before installing checked the windows XP box under the compatibility tab. No sound. I did windows update for this driver and it installed an updated driver. No sound. I went to Realtek and installed the windows 7 generic driver for this sound card (thats all manufacturer's offer is a generic driver) and LOW sound. Now I rebooted and back to No sound.
Before windows 7 sound, after no sound.
Toshiba put out a fix for a contextant audio driver for the low sound problem to be corrected with windows 7 but I cannot find anything for my computer.
I don't know know what to do! I don't want to go back to using XP but sound is REALLY important. I would think this is an integrated sound card (Toshiba isn't making service manuals public anymore, it was there the other day and gone today) so I cannot remove it. I don't think I have any available PCI slots to install a new one internally and I don't want extrenal speakers since I do a lot of traveling.
Is there a fix I don't know about? What can I do? Please HELP!!!

Hi Ryan,
Go here: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/downloadDetail.jsp?soid=1671893&pf=true
and download the software called "Sound Utility to Turn Mute Off After Upgrading to Vista", it is made for people that upgrade to VISTA, however, once you have all your Toshiba updates installed by downloading the Toshiba updates, then apply this update to your Windows7 system and the problem will resolve.
I don't know why they did not make this update part of the Toshiba Update Package.
I hope this helps,
best,
Alejandro

After Leopard Upgrade, HDTV No Longer Displays Full Screen Apple TV??

Fairly recent Apple convert. iMac is directly connected to HDTV (Mini-DVI to HDMI) and A/V Receiver(Toslink). After Leopard upgrade, I now have a black border, on HDTV, no matter what resolution I choose (worked automatically and perfectly on Tiger). In System Preferences-Display, I am mirroring the displays and have Overscan turned off, because without it, the Menu Bar does not display at all. I am wondering if Apple is trying to force me to buy an Apple TV or if maybe I just need to be patient until the correct drivers come out? Apple told me they were referring my problem to the Engineering Department, but I am not holding my breath. Primary need is to view Photos and eventually rent movies, when HD is readily available. Any opinions, predictions or suggestions on resolving would be appreciated. Thanks!!

same issue here. Don't use it very often so could not remember if it was fine previously thought it was. Hope we get help soon.

HT4623 My iPad 3 has lost the speaker sound after updating to iOS 6.1, headphones are working fine

My iPad 3 has lost the speaker sound after updating to iOS 6.1, headphones are working fine. Please help me out, done all the troubleshooting like restarting, side switcing, cleeaning the headphone jack etc.,

Hi I also have this problem. Sound was only working on the headphones and also on the volume slider in the settings app. Everywhere else I get no sound and no volume slider. Now the headphones don't work either.
(I'm using an ipad 2 iOS 6.1.2)
And NO it's not muted. I've reset all settings and restarted the iPad. Been searching forums for a couple days. Some say its a dirty docking port problem, others suggest a Skype or other app update that could be the problem.
No volume control icon appears when I press the volume control buttons. Only says sound effects, if it says anything at all. Most often there is NO volume icon. YouTube, video, music, and other game apps, no sound.

ISight not working after Leopard installation - 1st Generation MacBook

My iSight is no longer working on my 1G MacBook after Leopard clean installation. Does anyone have this problem?

What problem are other people having? My iSight also failed, but it's the strangest problem I've ever had with my Mac. It will turn on and stay on when it should, but the image is dark to start out with and fades to black.
Other people are mentioning systems not recognizing the camera at all. Is this the case across the board or is anyone experiencing what I mentioned here?

Poor sound after updating to ISO 7

Poor sound after updating to ISO 7. Before updating i had terrific sound both on my music and videos I recorded with my cam, i had to turn it down. Now, after update, i put volym on Max and can hardly hear the music or whatever. Anyone else with same problem?

I also loved my iphone because it HAD great sound. Since the update of the iso7 for my iphone 4s, i am missing my calls because I cannot hear the phone ringing. The sound is so low even though I have it on the highest sound possible. The is something in the update that caused this problem among others such as the phone blinking out while I am viewing videos. Help Apple! THe battery is going from 100 percent to 20 percent in two hours even when I have almost turned off everything on my iphone. I need my sound back! Apple please find out what happened in your update that caused the loss of the sound!

Lost ipad sound after upgrading to ios7

As soon as I click the iOS7 upgrade my ipad volume is gone

First thing to try if you have no sound at all, even in the Music App, try rebooting the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If you lost sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085
Still no luck - try cleaning the dock connector opening of the iPad with a soft brush and just a little bit of rubbing alcohol.
If that fails, then try resetting all settings. Settings>General>Reset>Reset all settings. No data will be lost but all device settings have to be entered again.
Should you still have no sound after trying all of these steps, restoring the iOS software would be the next thing to try.

Mac mail makes no sound after sleeping

Why does Mac Mail stops making the new mail alert sound after falling asleep? How can I solve this?
I have to close mail, wait a few seconds, then reopen to restore the sound. Very annoying.

Reset The Pram
http://support.apple.com/kb/ht1379
(Try several attempts to get the corect sequence)
Reset the SMC
http://support.apple.com/kb/ht3964

Why my iPad mini 2 no sound after updated to iOS8

Why my iPad mini with retina display no sound after updated to iOS8

I solved for my ipad mini retina:
- Go to Settings->General
- Change the function of the slider on the side of the ipad from 'rotation lock' to 'sound off'
- Wiggle the slider up and down
- Sound is restored
- You can set the slider back to rotation lock again

Garbled sound after upgrade to ios7.0.6 for ipad

pls advise if you experienced garbled sound after upgrade to ios7.0.6 for ipad2. thanks

Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset

Keynote disappeared after leopard installation

I AM HAVING SOME SERIOUS DATA LOSS AND PROGRAM LOCATION PROBLEMS AFTER LEOPARD INSTALLATION.
I can not find my previous keynote application program , which was part of ilife08, where did go?
same thing with adobe files , every program is trial version after LEOPARD INSTALLATION.

Ahh, welcome to the wonderful world of wifi under Leopard. Maybe you weren't aware that tens of thousands of people have been having endless problems with wifi whilst using Leopard .... I just got back from holiday - full signal yet no internet. Connect using ethernet and there it is - working perfectly. The culprit? Apple's very own Airport extreme base station, the new one which I bought thinking my old one was on the blink - nope.
Meanwhile Apple have not said a word about this in the last 8-10 weeks of utter misery for countless people - not a sausage. Many people are counting on 10.5.2 fixing this. I say don't count on it. Remember to complain to Apple as it is their own software/hardware that is at fault here. Meanwhile, they introduce a ... wifi laptop.... ooh the irony.

No sound after OSX 10.6.8 upgrade

No sound after OSX 10.6.8 upgrade

Go step by step and test.
1. System Preference > Sound > Output > Internal Speakers
    Highlight Internal Speakers / Headphones
    Make sure that Mute is not enabled.
2.Plug in and remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so, uncheck it.

How to prevent key sound after pressing Enter

I don't want to hear "beep" sound after pressing enter in TextBox object.
Is it possible to prevent this?
Private Sub TextBox1_KeyPress(ByVal sender As System.Object, ByVal e As System.Windows.Forms.KeyPressEventArgs) Handles TextBox1.KeyPress
If e.KeyChar = Convert.ToChar(13) Then
MsgBox("You will hear "beep" after you press it")
End If
End Sub

Hi,
I am guessing this is a single line TextBox. You can use the KeyDown event to detect the Enter key being pressed and Suppress the Key. If you are using the Enter Key to do something when it is pressed in the TextBox then put it in here
instead of the KeyPress event.
Private Sub TextBox1_KeyDown(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyEventArgs) Handles TextBox1.KeyDown
If e.KeyCode = Keys.Enter Then
e.SuppressKeyPress = True
'Do something here if you need to when Enter is pressed
End If
End Sub
If you say it can`t be done then i`ll try it

No Sound after Leopard

Similar Messages

Maybe you are looking for