No sound after Update through HP Support Assistant

I have Hp Pavilon g6-1a71 Notebook PC with Windows 7 64-bit installed.
I just installed couple of updates on my notebook that HP Support Assistant requested which includes HP Bios Update, IDT Audio Update, HP software framework and new HP Support Assistant.
After the update, my sound is not working. When I click on the level of sound the meter rises up but no sound is heard.
I 've already tried re-installng audio driver but it doesn't help.
Can anyone please help? Could it be possibly due to Bios update? If yes, can I restore my previous BIOS?

go to control panel/sound and make sure on the playback devices tab the idt is the default device. hit the set default button at bottom to set it.

Similar Messages

No windows sound after updating the IDT High definition Codec!! HELP!!!

Hi all
I really need ur help now
I have updated IDT High Definitio Audio Codec several days ago
after i reboot my notebook, I couldn't hear my windows sound anymore
than i reboot till 2 times, n the windows sounds was heard again
However, after I turn it on the next day, i found that i have no windows sounds again
but i can play media players, such as winamp, n could hear msn sound
After i reboot my PC, the sound was heard. But after turning it on for the 2nd times, i couldn't hear the windows sound again!!!
Help me please
How could I fix this?
I have rollback driver, but i doesn't work. Coz before updating IDT audio by windows update, I have updated IDT audio through HP support assistant
N i am a little bit afraid of doing system restore...
PLEASE HELP ME
THX

Hi,
Download correct audio driver.
How to find it on HP sites?
1. Click on Support & Drivers link. (Upper part of this page.)
2. Choose option: Download drivers and software (and firmware)
3. In form:
Enter a product name / number
For product provide Your p/n. (How to find correct p/n informations here.)
4. Click on Go and choose system which You are using now.
Disconnect from Internet.
Uninstall from Your system IDT audio drivers.
Resources:
Uninstalling Software in Windows 7
Uninstall or change a program in Windows 7
Restart Your system:
On boot press ' F8 ' and choose ' Safe mode '.
Go to Control Panel -> Devices Manager -> Audio, Video and Games Controllers
and find there Audio card. Click on it with right button of Your mouse and choose uninstall driver.
Restart Your system and this time start it in normally.
Install this driver which You downloaded.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

I can't download updates from hp support assistant

I have hp pavilion g6 and i can't download updates from hp support assistant, when i press download and install selected updates then i found above downloads is completed then i clicked Next and when i came back i found it still not done, help please!
This question was solved.
View Solution.

Hi,
Try the following
First of all, uninstall your current version of HP Support Assistant by using the Microsoft 'Fixit' on the following link - this is particularly useful in correcting issues that may prevent reinstallation on machines running a 64bit OS.
http://support.microsoft.com/mats/Program_Install_and_Uninstall
When this has completed, restart the notebook.
Next download and install the latest version of HP Support Assistant from the page on the link below - the download links are towards the bottom of the page.
http://h18021.www1.hp.com/helpandsupport/hp-support-assistant.html
After the installation, restart the notebook again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HT4623 My iPad 3 has lost the speaker sound after updating to iOS 6.1, headphones are working fine

My iPad 3 has lost the speaker sound after updating to iOS 6.1, headphones are working fine. Please help me out, done all the troubleshooting like restarting, side switcing, cleeaning the headphone jack etc.,

Hi I also have this problem. Sound was only working on the headphones and also on the volume slider in the settings app. Everywhere else I get no sound and no volume slider. Now the headphones don't work either.
(I'm using an ipad 2 iOS 6.1.2)
And NO it's not muted. I've reset all settings and restarted the iPad. Been searching forums for a couple days. Some say its a dirty docking port problem, others suggest a Skype or other app update that could be the problem.
No volume control icon appears when I press the volume control buttons. Only says sound effects, if it says anything at all. Most often there is NO volume icon. YouTube, video, music, and other game apps, no sound.

Poor sound after updating to ISO 7

Poor sound after updating to ISO 7. Before updating i had terrific sound both on my music and videos I recorded with my cam, i had to turn it down. Now, after update, i put volym on Max and can hardly hear the music or whatever. Anyone else with same problem?

I also loved my iphone because it HAD great sound. Since the update of the iso7 for my iphone 4s, i am missing my calls because I cannot hear the phone ringing. The sound is so low even though I have it on the highest sound possible. The is something in the update that caused this problem among others such as the phone blinking out while I am viewing videos. Help Apple! THe battery is going from 100 percent to 20 percent in two hours even when I have almost turned off everything on my iphone. I need my sound back! Apple please find out what happened in your update that caused the loss of the sound!

Why my iPad mini 2 no sound after updated to iOS8

Why my iPad mini with retina display no sound after updated to iOS8

I solved for my ipad mini retina:
- Go to Settings->General
- Change the function of the slider on the side of the ipad from 'rotation lock' to 'sound off'
- Wiggle the slider up and down
- Sound is restored
- You can set the slider back to rotation lock again

Lost sound after update to 10.7.3 my recent mbp i7 ivybridge 13.3 mid 2012

please help me quickly ...i lost sound after update to 10.7.5my recent mbp i7 ivybridge 13.3 mid 2012
i also tried re installing 10.7.3 and finally 10.8 also lost sound
but when i boot to windows 7 the sound works fine in windows and dissappear again in mac os
what can i do ???????
macbook pro core i7 ivybridge 13.3 mid 2012

The service centre told me it will need changing the logic board

Distorted sound after updating from iTunes 10.4 to 10.5 in Win XP SP3

After the latest Apple update,I have istorted sound after updating from iTunes 10.4 to 10.5 in Win XP SP3.
But it plays normally sounds coming from my connected iPod or any internet radio station !!
If I add any song to a playlist, it turns out to be just noise!
Any clue ?
Thanks for any help !
LAO

I recieved the same message. Have you found a fix to this?
If not, read my issue because I belive we have the same
https://discussions.apple.com/thread/3442836
It would be nice to work this out with another person.

Sound not working on dm4-2070us Notebook after BIOS and HP Support Assistant

The sound on my dm4-2070us Pavilion notebook has stopped funcitoning after this evening's BIOS and HP Support Assistant updates. I am running Windows 7, 64-bit. After the update, a driver update was installed for the IDT High Definition Audio CODEC. The update installed fine and is enabled, however, I hear nothing when testing sounds on through my laptop speakers. Any advice? I tried rolling back the driver, but that did resolve the issue.

I got the same Issue after updating the bios to F.17, got the Audio issue resolved after installing driver version:6.10.6423.0 >> http://ftp.hp.com/pub/softpaq/sp58501-59000/sp58698.exe

Loss of sound after updating IDT High Definition Audio Codec.

HP Support Assistant said a new IDT HI Def Codec driver was available so I downloaded and installed 6.10.6417.0 after which I have no sound output. I am not sure what driver version was installed before the update but I have since downloaded and installed 6.10.6330.0 and rebooted but still have no sounds. The device is enabled and Windows says it is working properly (which it isn't but then it is Windoz).
I am now totally at a loss as to how to proceed other than a clean install of Windows which for obvious reasons I would rather not do.
System details:
HP Envy 14-2002ea Beats Edition runing Windows 7 Ultimate 64bit SP1.
This question was solved.
View Solution.

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp53001-53500/sp53281.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f9 to load the defaults ( this is sometimes f5, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Problem with sound after updating to ios 7.0.6

Help!
No sound whatsoever from the speaker after updating to ios 7.0.6.
Sound from earplugs & through dock OK.
I tried everything I found on the web, but nothing worked up till now.
Tips, anybody?

Hi singsingsarah,
Thanks for visiting Apple Support Communities.
Be sure to try all of these steps if you do not hear sound from your iPhone speakers:
If you do not hear sound from the built in speaker, try these steps:
Verify that the volume is set to a level you would normally be able to hear.
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
You can find the article with these steps here:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Best,
Jeremy

I am not able to answer the call from i phone 5 after updating ios7 can u assist me to solve

after updating while ringing call not able to answer i restart and reset but still some call scren is hanging not able to answer
can u assist me what to do next please

The Basic Troubleshooting Steps as outlined in the User Guide are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset > http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring > http://support.apple.com/kb/HT1414

Bad sound after updating

Bad sound after updating

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
 Cheers, Tom

I DO NOT SOUND AFTER UPDATE OF WINDOWS 8.1 UPDATE

HI IM HAVING PROBLEMS WITH THE SOUND ON MY COMPUTER AFTER UPDATING WINDOWS 8.1 CAN U PLEASE ASSIST ME

Hi,
Can you post back with the full Model No. and Product No. of your notebook - see Here for a guide on locating this information.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Why no sound after updated my IPhone 4S to the latest OS

There is jus no volume or sound after I updated the latest OS. Not even YouTube or ringing tone. Even the volume control seems useless!!

Here you go:
http://support.apple.com/kb/TS1567

No sound after Update through HP Support Assistant

Similar Messages

Maybe you are looking for