No sound after updating to kernel 2.6.36 from [testing]

Hello,
I updated to kernel 2.6.36 and after i rebooted i had no sound . I use alsa + pulseaudio ... my configuration was working before the update. This is a kernel bug/ i have to change the configuration after this update?
Thank you and best regards
Stefan

ngoonee, I use alsa+phonon and have the same affected hardware (HDA Intel ad198x) here: http://www.spinics.net/lists/alsa-devel/msg39189.html. Like the OP, it was a crapshoot if my sound worked at all when using testing/kernel26 and, like others, applying the patch fixed it. The affected audio chip is rather popular with laptops, including my business HP, and is far from being an esoteric piece of hardware. In fact, this regression hits all Intel HDA - Analog Devices (adNNNN) chips (http://article.gmane.org/gmane.linux.alsa.devel/78422). To make a long story short, I checked the patches for 2.6.36.1 and the patch that fixes this regression did not make it in. So, I guess I answered my question and will have to compile the kernel with the sound-fix patch.
Last edited by ssri (2010-11-23 08:53:29)

Similar Messages

HT4623 My iPad 3 has lost the speaker sound after updating to iOS 6.1, headphones are working fine

My iPad 3 has lost the speaker sound after updating to iOS 6.1, headphones are working fine. Please help me out, done all the troubleshooting like restarting, side switcing, cleeaning the headphone jack etc.,

Hi I also have this problem. Sound was only working on the headphones and also on the volume slider in the settings app. Everywhere else I get no sound and no volume slider. Now the headphones don't work either.
(I'm using an ipad 2 iOS 6.1.2)
And NO it's not muted. I've reset all settings and restarted the iPad. Been searching forums for a couple days. Some say its a dirty docking port problem, others suggest a Skype or other app update that could be the problem.
No volume control icon appears when I press the volume control buttons. Only says sound effects, if it says anything at all. Most often there is NO volume icon. YouTube, video, music, and other game apps, no sound.

Poor sound after updating to ISO 7

Poor sound after updating to ISO 7. Before updating i had terrific sound both on my music and videos I recorded with my cam, i had to turn it down. Now, after update, i put volym on Max and can hardly hear the music or whatever. Anyone else with same problem?

I also loved my iphone because it HAD great sound. Since the update of the iso7 for my iphone 4s, i am missing my calls because I cannot hear the phone ringing. The sound is so low even though I have it on the highest sound possible. The is something in the update that caused this problem among others such as the phone blinking out while I am viewing videos. Help Apple! THe battery is going from 100 percent to 20 percent in two hours even when I have almost turned off everything on my iphone. I need my sound back! Apple please find out what happened in your update that caused the loss of the sound!

Why my iPad mini 2 no sound after updated to iOS8

Why my iPad mini with retina display no sound after updated to iOS8

I solved for my ipad mini retina:
- Go to Settings->General
- Change the function of the slider on the side of the ipad from 'rotation lock' to 'sound off'
- Wiggle the slider up and down
- Sound is restored
- You can set the slider back to rotation lock again

Lost sound after update to 10.7.3 my recent mbp i7 ivybridge 13.3 mid 2012

please help me quickly ...i lost sound after update to 10.7.5my recent mbp i7 ivybridge 13.3 mid 2012
i also tried re installing 10.7.3 and finally 10.8 also lost sound
but when i boot to windows 7 the sound works fine in windows and dissappear again in mac os
what can i do ???????
macbook pro core i7 ivybridge 13.3 mid 2012

The service centre told me it will need changing the logic board

Distorted sound after updating from iTunes 10.4 to 10.5 in Win XP SP3

After the latest Apple update,I have istorted sound after updating from iTunes 10.4 to 10.5 in Win XP SP3.
But it plays normally sounds coming from my connected iPod or any internet radio station !!
If I add any song to a playlist, it turns out to be just noise!
Any clue ?
Thanks for any help !
LAO

I recieved the same message. Have you found a fix to this?
If not, read my issue because I belive we have the same
https://discussions.apple.com/thread/3442836
It would be nice to work this out with another person.

Problem with sound after update

Hello
After update to 11.3 I have no bass sound in subwoofer in Firefox browser (youtube). I uninstall the newest version and install previous (11.2) and bass plays ok.
My os: Windows 7 x64. Sound card Creative X-fi.

Hello!
My problem is summed up in this topic.
Updated Flash Player with 11.3 this morning (june 12th 2012) and since then my 7.1 Sound System works only 2.1. If i enable EAX Effects, works on 7.1 but since it`s just a room it sounds very odd.
I have no problem with sound on HTML 5 websites for that matter, Winamp, Video Players, games.
Uninstalled Flash Player, sounds work ok without it on different browsers, other than Chrome (since it has FP built in).
I hope for a sollution soon.
Thank you.
*edit*
Untill there is a permanent solution, i found a way to deal with my issue and i hope it will help others.
I personally use Chrome and this is for this browser:
1. Type "about:plugins" w/o the quotation in the navigation bar.
2. On the upper right u will see "Details" click it then find the word "flash", and you will see something like this:
Flash (3 files) - Version: 11,3,300,257
Shockwave Flash 11.3 r300
Name: Shockwave Flash
Description: Shockwave Flash 11.3 r300
Version: 11,3,300,257
3. I say again, this worked for me on Chrome. The 3 files i have, two of them are Version 11,3,300,257 and one is 11.2.31.144
4. Simply disable the lates version 11.3 and enable the previous version 11.2
I hope this helps.
Message was edited by: AndrewPAM

I have no sound after updating to iOS 6.1.3

After updating I lost sound. Tried restoring and still no sound. Guess I'll have to get a new phone...any other suggestions?

Check out my post I spent 15 hours fixing it when my iPad 2 on iOS 6.1.3 volume disappeared.
https://discussions.apple.com/thread/5075175

Multiple message sounds after updating iOS 5

After updating my iphone 4 to iOS 5, Whenever i get a msg or a notification, the tri-tone message sound is played about 3 times. Am i the only one?

If you mean that the tri-tone sound is repeated with intervals of two minutes: When you go to Settings -> Notifications -> Messages, near the bottom you can choose how often a message alert must be repeated. This can be set to never.

No sound after updating to 10.7.3 - no boot camp available

All sounds gone after updating to 10.7.3
tried to reset NVRAM + PRAM via pressing (cmd)+(alt)+(p)+(r) while starting - this was not helping.
Found also the thread below, but i have no boot camp available
https://discussions.apple.com/message/17477460
All ideas welcome----

You should correct the model of mac, cannot be PowerBook, perhaps MacBook or MacBook Pro.
I have read that many people have had problems after last update, here all is fine. The only idea I have is to download from Apple site the combo update (the bigger update), and re-run it. This often solves issues.
As about BC, can you see that partition in Disk Utility? If yes, open Finder preferences, do setttings look like here?

No windows sound after updating the IDT High definition Codec!! HELP!!!

Hi all
I really need ur help now
I have updated IDT High Definitio Audio Codec several days ago
after i reboot my notebook, I couldn't hear my windows sound anymore
than i reboot till 2 times, n the windows sounds was heard again
However, after I turn it on the next day, i found that i have no windows sounds again
but i can play media players, such as winamp, n could hear msn sound
After i reboot my PC, the sound was heard. But after turning it on for the 2nd times, i couldn't hear the windows sound again!!!
Help me please
How could I fix this?
I have rollback driver, but i doesn't work. Coz before updating IDT audio by windows update, I have updated IDT audio through HP support assistant
N i am a little bit afraid of doing system restore...
PLEASE HELP ME
THX

Hi,
Download correct audio driver.
How to find it on HP sites?
1. Click on Support & Drivers link. (Upper part of this page.)
2. Choose option: Download drivers and software (and firmware)
3. In form:
Enter a product name / number
For product provide Your p/n. (How to find correct p/n informations here.)
4. Click on Go and choose system which You are using now.
Disconnect from Internet.
Uninstall from Your system IDT audio drivers.
Resources:
Uninstalling Software in Windows 7
Uninstall or change a program in Windows 7
Restart Your system:
On boot press ' F8 ' and choose ' Safe mode '.
Go to Control Panel -> Devices Manager -> Audio, Video and Games Controllers
and find there Audio card. Click on it with right button of Your mouse and choose uninstall driver.
Restart Your system and this time start it in normally.
Install this driver which You downloaded.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

No sound after update on Macbook Pro

Hi all,
after running the latest software update on my MacBook Pro (early 2007) the sound stopped working (except for in iTunes). I suspect it has something to do with the iTunes 9 / QT update. Also system preferences freezes when I try to access the sound settings...
Any ideas?
Thanks,
Ulf

These two links have references to sound issues:
http://discussions.apple.com/thread.jspa?threadID=1909270&tstart=0
http://discussions.apple.com/thread.jspa?threadID=1933397&tstart=0
However, since this is associated with an update it is possible something more extensive is involved. I would:
Boot from installer disk and verify hard drive is okay with Disk Utility > First Aid.
If okay, boot from computer and use Disk Utility on main drive to repair permissions. Check sound.
If still bad, back up critical files, try reinstalling updates one at a time repairing permissions in between.
If still bad, resort to Archive and Install with preserve users & settings.
Updating
Certain steps appear to minimize the risk of an update producing problems.
Number one is to make sure you have a bootable clone backup of your computer in case you do need to back out of it again. This is the only guaranteed way of not having to worry about the results of an update.
Some like to boot from their installer discs or an external backup and verify (and if necessary repair) their internal drives as well as drive permissions. This is done with Disk Utility. You can verify a drive while booted from the same drive but sometimes this produces spurious errors. Repairing a drive (if necessary) has to be done while booted from another disk. Permissions repair can, and is probably best, done when booted from your internal drive.
[Resolve startup issues and perform disk maintenance with Disk Utility and fsck|http://docs.info.apple.com/article.html?artnum=106214]
[Using Disk Utility in Mac OS X 10.4.3 or later|http://docs.info.apple.com/article.html?artnum=302672]
[Disk Utility's Repair Disk Permissions|http://docs.info.apple.com/article.html?artnum=25751]
You can also go to the step of booting into safe mode to do the install.
[Mac OS X: Starting up in Safe Mode|http://docs.info.apple.com/article.html?artnum=107393]
[What is Safe Boot, Safe Mode? (Mac OS X)|http://docs.info.apple.com/article.html?artnum=107392]
[Safe Boot takes longer than normal startup|http://docs.info.apple.com/article.html?artnum=107394]
I like to download the update onto my computer and install it from there rather than let Software Update do it. I know a few people who had problems with doing the update via software updater found a manual install to work.
Repair permissions again afterward.
It helps to only install one update at a time and to run the computer for a while to make sure it is behaving well.
The more cautious even like to unplug third party peripherals (see [comment by BDaqua|http://discussions.apple.com/message.jspa?messageID=9040746#9040746]).
Almost all of the above steps (except backup) have been questioned as to necessity because probably many people have done successful updates without doing them. I say they can't hurt, they can very likely do good (especially if your computer isn't regularly maintained), so why not do them to be safe.
[BDaqua's comments on updating problems|http://discussions.apple.com/message.jspa?messageID=8948595#8948595]
[Baby Boomer's comments on updating problems|http://discussions.apple.com/message.jspa?messageID=9025760#9025760]
[Klaus1's post on updating and removing updates|http://discussions.apple.com/message.jspa?messageID=9856275#9856275]

Apple Tv (2nd gen) No sound after update

I updated our Second gen apple tv last night with the latest update that came out yesterday. At first it crashed it showed the itunes log with the cable so I hooked it up to the computer and let iTunes restor it (per the instruction here: http://support.apple.com/kb/HT4367). After the restor was done I hooked it back up and set up all the network settings again. I went to Netflicks and there was no sound. I tried one of my movies from my server no sound. I tried a song from the server no sound.
I did a bit of looking around and did a full factory reset on it, per the instructions I found. Still no sound.
I followed the instructions on the forums still no sound. I have unpluged the HDMI cable, Unpluged the power, done a rest and still no sound any idea what is going on here?
Is anyone else have issues after this new update?

Doing a restore puts all of the factory settings back in place. Have you checked your audio output settings? You may need to turn Dolby Digital ON (Or Auto), or OFF depending on what the ATV is connected to.
I have one connected HDMI to a TV so Dolby Digital needs to be set to Off .
I have another connected to an audio receiver, so DD is set to Auto (which is On in this case) .

Problem with sound after updating to ios 7.0.6

Help!
No sound whatsoever from the speaker after updating to ios 7.0.6.
Sound from earplugs & through dock OK.
I tried everything I found on the web, but nothing worked up till now.
Tips, anybody?

Hi singsingsarah,
Thanks for visiting Apple Support Communities.
Be sure to try all of these steps if you do not hear sound from your iPhone speakers:
If you do not hear sound from the built in speaker, try these steps:
Verify that the volume is set to a level you would normally be able to hear.
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
You can find the article with these steps here:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Best,
Jeremy

I DO NOT SOUND AFTER UPDATE OF WINDOWS 8.1 UPDATE

HI IM HAVING PROBLEMS WITH THE SOUND ON MY COMPUTER AFTER UPDATING WINDOWS 8.1 CAN U PLEASE ASSIST ME

Hi,
Can you post back with the full Model No. and Product No. of your notebook - see Here for a guide on locating this information.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

No sound after updating to kernel 2.6.36 from [testing]

Similar Messages

Maybe you are looking for